Problem with MERGE INTO setting

Similar Questions

• Problem with merge statement

    CREATE TABLE "XCR_DAILY_JOB_STATUS" 
     (     "CAMPAIGN_ID" VARCHAR2(50 BYTE), 
       "REPORTING_DATE" DATE, 
       "REPORT_TYPE" CHAR(10 BYTE), 
       "STATUS" NUMBER(1,0) DEFAULT 0, 
       "CREATED_DTTM" DATE DEFAULT sysdate, 
       "UPDATED_DTTM" DATE
     );

  create or replace
  FUNCTION fn_update_job_status (
     p_campaign_id      VARCHAR,
     p_process_date     DATE,
     p_report_type      VARCHAR,
     p_process_status   NUMBER
  )
     RETURN NUMBER
  IS
     PRAGMA AUTONOMOUS_TRANSACTION;
     v_campaign_id      VARCHAR (50)    := TRIM (p_campaign_id);
     v_process_date     DATE            := p_process_date;
     v_process_status   PLS_INTEGER     := p_process_status;
     v_report_type      VARCHAR (32)    := upper(trim(p_report_type));
     v_err_num          PLS_INTEGER     := 0;
     v_error_message    VARCHAR2 (4000);
  BEGIN
    
    dbms_output.put_line(v_campaign_id || v_process_date || v_report_type || v_process_status);
     MERGE INTO xcr_daily_job_status a
        USING (SELECT v_campaign_id AS campaign_id,
                      v_process_date AS reporting_date,
                      v_report_type AS report_type, v_process_status AS status
                 FROM DUAL) b
        ON (    upper(a.campaign_id) = upper(b.campaign_id)
            AND a.reporting_date = b.reporting_date
            AND a.report_type = b.report_type)
        WHEN MATCHED THEN
           UPDATE
              SET a.status = b.status,
              a.updated_dttm = SYSDATE
        WHEN NOT MATCHED THEN
           INSERT (a.campaign_id, a.reporting_date, a.report_type, a.status,
                   a.created_dttm)
           VALUES (b.campaign_id, b.reporting_date, b.report_type, b.status,
                   SYSDATE);
     COMMIT;
     RETURN v_process_status;
  EXCEPTION
     WHEN OTHERS
     THEN
        v_err_num := SQLCODE;
        v_error_message := SUBSTR (SQLERRM, 1, 4000);
        DBMS_OUTPUT.put_line ('Error code ' || v_err_num || ': '
                              || v_error_message
                             );
        ROLLBACK;
        RETURN v_err_num;
  END;

  When I train this time two

  select fn_update_job_status('cmp12105', to_date('17-JAN-2013','DD-MON-YYYY'), 'AUDIENCE', 1) from dual;

  Instead of update of the old line, it will create the new line: (.)
  
  What could be the problem?
  
  Published by: Mr. lonely on 14 March 2013 15:05

  Is why REPORT_TYPE is of type CHAR (10 BYTES) in the table and v_report_type is of type VARCHAR (32) in proc, and then you do not need TRIM.
  I suggest to use VARCHAR2 to both with the same length.

  And also fix the date in proc comparison, AND trunc (a.reporting_date) = trunc (b.reporting_date)

  Solve these and your problem will be solved, I tried and its working fine now.

  Kind regards
  Ankit Rouault
  http://oraclenbeyond.blogspot.in

• Major audio problem with merged Clips

  Try this once again, having a major problem since update works with merged clips.  I merge all my video and audio clips into a project of prior work flow in first pro.  I'll be shooting my images, tagged and synchronized in the project.

  Because the first does not have more than 1 project open at the same time, I copied the files, closed before workflow project and opened my feature film project that I worked for.  Copied clips merged bin, I click on a clip, video plays well, but there is no audio playback.

  I try to import the project files of prior workflows by using the import project feature, keep that real merged clips (like the rest of my project is this way) still no sound.  I cleaned my cache of media, reset preferences, even uninstalled first and redownloaded.  Problem persists.

  Can you help me understand what the question is whether I can go back to making progress on this feature of finishing project?

  Here's my workflow and no problems so far.  I do it this way because I found after all files in the project was originally crash constantly when I was working.  I have a new I7' processor IMac with 24 GB of RAM.  And since the first does not allow to open multiple projects at the same time (wish it would change.  Avid and FCP both allowed several projects) that I have to do things this way.

  Before workflow project file

  Label all the video and Audio files to match the scene #' / takes

  The value in points on all the video and audio in order to reflect the slate

  Merge Clips

  Functional project file

  Import only Clips merged into Project.  Import or copy/paste

  Now, I did this workflow from the beginning about.  Removing all the source video and all the audio clips of my work project remain while my bins containing my merged clips.  Had no problem and edit has been smooth.  Did a day pickup last week, followed the same steps as I did in the past, imported clips merged into my work project and clips have audio, set to none by default.  Now, once I'm in the sequence I can manually set and this is, but I can't read the audio data in the source monitor, which is how to change, there is no reason, I should have to go back in the manner of the crappy editing with FCP copy and paste from a sequence.

  Able to repro.  Bug was noted.

• Problem with MERGE in Oracle 9i R2

  CREATE TABLE SUBRONOW_LOAD_LOG
  (
  LOG_ID NUMBER (10) NOT NULL,
  PROCESSED_FLG VARCHAR2 (1 BYTE) NOT NULL,
  DATE OF SN_LOAD_START_DATE,
  DATE OF SN_LOAD_END_DATE,
  DATE OF ST_LOAD_START_DATE,
  DATE OF ST_LOAD_END_DATE,
  STATUS NVARCHAR2 (20).
  DESCRIPTION VARCHAR2 (30 BYTE)
  );
  
  MERGE INTO subronow_load_log JOURNAL
  With the HELP of DOUBLE d
  WE (log_id & LOG.log_id = AND & e_count > 0)
  WHEN MATCHED THEN
  UPDATE
  SET LOG.processed_flg = 'P '.
  WHEN NOT MATCHED THEN
  INSERT (LOG.log_id, LOG.processed_flg, LOG.status)
  VALUES (subronow_load_log_id_seq. NEXTVAL, 'P', 'IN PROGRESS');
  
  SQL > MERGE IN subronow_load_log JOURNAL
  2 with the HELP of DOUBLE d
  3. WE (log_id & LOG.log_id = AND & e_count > 0)
  4. WHEN MATCHED THEN
  UPDATE 5
  6 SET LOG.processed_flg = 'P '.
  7 WHEN NOT MATCHED THEN
  8 INSERT (LOG.log_id, LOG.processed_flg, LOG.status)
  9 VALUES (subronow_load_log_id_seq. NEXTVAL, 'P', 'IN PROGRESS');
  Enter the value for log_id: 85
  Enter the value of e_count: 9
  old 3: WE (log_id & LOG.log_id = AND & e_count > 0)
  new 3: WE (LOG.log_id = 85 AND 9 > 0)
  
  0 lines merged.
  
  
  SQL > /.
  Enter the value for log_id: 27
  Enter the value of e_count: 5
  old 3: WE (log_id & LOG.log_id = AND & e_count > 0)
  new 3: WE (LOG.log_id = 27 AND 5 > 0)
  
  1 row merged.
  
  Update the above statement to merge part works fine.
  but the INSERT statement doesnot work.
  
  Can you please help me in this regard?

  With the HELP of DOUBLE d
  WE (log_id & LOG.log_id = AND & e_count > 0)

  It should be:

  USING (select &log_id as log_id,  &e_count as e_count  from DUAL) d
  ON (LOG.log_id = d.log_id AND d.e_count > 0)
  

  Nicolas.

• Problem with 'insert into array.

  First of all, sorry for my English.

  I have a problem with this function, I want to insert an item in the table of size 16 based on the index, but when I insert an element in position 4 (for example) and then I insert another element at position 2, the element that was at position 4 is moved to position 5, and I have no why understan

  Can you help me? Thank you

  Table Insert will increase the size of the table and therefore all which comes after your insert index will be its index increased by the number of items you enter.

  If you want to replace an item in a table - use "replace the subset of the table.

  Here is an example:

  

  Output:

  

• Anyone having problems with crashes after setting the units (lb/po2) on an indicator on the dipstick?

  I use an indicator of money gauge to show pressure. With no set of units, everything seems to work properly. When I set units 'psi' and immediately try to save LabView hangs and crashes immediately after each next attempt to open the file project or VI. I'm using LabView 2012 (12.0f3) 64-bit on Windows 8. It is the first crash, I had. Unfortunately, it seems that the file is corrupted and I lost a few hours of work. Now I'm afraid to continue using this VI of fear he crash of something else and corrupt the file and I'll lose my progress. Any help would be greatly appreciated. I presented the crash to the settlement report, but who knows how long it takes to move to study the problem.

  Hi Arcus,

  If you search the forum you will find a large number of "moaning" on the buggy and incomplete unit support in LabVIEW. My favorite is the square function (available from LV2009?) which will follow "4 m" when you want as the square of "2 m". Of course: meter ^ 2 is always meter. And we're just talking a very basic unit...

  

  You will also find on the controls of the money bug reports.

  Combine all these threads in your own conclusions!

  I don't use controls of the money, and usually I stay away by using units of our days...

  BTW: I would also stay away from units such as "psi". Just my continental Europe perspective

  (Once I got to work with a machine (treatment of semiconductors) produced in the United States. She had 4 gauges next to each other using 3 different units: lb/po2, inHg, Torr. There must be a reason to do it, but have you ever needed to compare these pressures? Easy to remember these conversions...)

• Problem with merging the accounts of Xbox games.

  Dear Sir or Madam,

  I am writing you about a problem I have with my accounts. I have one in windows live with PC games that I create in the second place, when I bought the XBOX. Possible is the merging of two account? I have this two accounts for a long time and I have a few games on them and I don't want two separate accounts. I am the holder of the account, so I can give you any details you need.

  Yours faithfully,
  Radek.

  Short answer: you can't do it.  You basically have to decide which one you want to use and stop using it.

  More information:

  1. Microsoft's answer to the combination of multiple accounts
  2. Microsoft link accounts
  3. Functionality of linked accounts Outlook.com Microsoft Drops

  More help:

  • The community is a good place to find answers to many of your questions how do and get advice from other users and members of the community.  However, questions about your Microsoft account are not best dealt with in a public forum because of the personal information at issue.   Click here to learn more about how to get help with your Microsoft account: where to get additional support for my account and information questions?

• Local data store renaming problem with the cmdlet set-datastore

  Hiya,

  I just started using powercli to configure my ESX Servers 4.1i.

  Most of my script version works fine - but I can't rename the local data store.

  I do a get-data store based on the name that works very well, I then pipe series-store data with a new name-, but it just seems to ignore the order and leave it with the old name.

  No error message is produced.

  I pasted in the results of the "get-data store" (just to show that it exists) and the results of the 'get-datastore piped to set-data store", below.

  I'm sure I'm missing something really obvious - but I do not know what?

  [vSphere PowerCLI] D:\powershell > get-datastore-name 'test1' | fl

  
  DatacenterId: Datacenter-ha-datacenter
  Datacenter: ha-datacenter
  ParentFolderId: Folder-ha-folder-datastore
  ParentFolder: datastore
  DatastoreBrowserPath: vmstores:\ohst213vmh.blah.co.uk@443\ha-datacenter\test1
  FreeSpaceMB: 64207
  CapacityMB: 64768
  Accessible: true
  Type: VMFS
  ExtensionData: VMware.Vim.Datastore
  ID:-Datastore-4d4c2877-c48e1465-b0be - 00237d 358458
  Name: test1
  UID: /[email protected]:443 / Datastore = Datastore-4d4c2877-c48e1465-b0be-002
  37d 358458.

  [vSphere PowerCLI] D:\powershell > get-datastore-name "test1" |-store game data-name 'test2' | fl

  
  DatacenterId: Datacenter-ha-datacenter
  Datacenter: ha-datacenter
  ParentFolderId: Folder-ha-folder-datastore
  ParentFolder: datastore
  DatastoreBrowserPath: vmstores:\ohst213vmh.blah.co.uk@443\ha-datacenter\test1
  FreeSpaceMB: 64207
  CapacityMB: 64768
  Accessible: true
  Type: VMFS
  ExtensionData: VMware.Vim.Datastore
  ID:-Datastore-4d4c2877-c48e1465-b0be - 00237d 358458
  Name: test1
  UID: /[email protected]:443 / Datastore = Datastore-4d4c2877-c48e1465-b0be-002
  37d 358458.

  See you soon

  Jordan

  When you add a server ESX to vCenter, agent VirtualCenter (vpxa) service is installed on the ESX Server.

  All actions you take in the vSphere ESX server customer or a PowerCLI script when you are connected to the vCenter, passed through this vpxa service. This service manages the resources on the ESX Server.

  To avoid problems when you change some resources directly from the COS of ESX, vpxa services locks these resources.

  That's why you can not change the datastorename when you are connected directly to an ESX Server that has been added to a vCenter.

  BTW, if you connect a vSphere client directly to the ESX Server, you will see the same phenomena as what you see in your script PowerCLI.

  If you need to change the datastorename locally on the ESX for some reason, you can try to remove the ESX Server with Remove-VMHost to vCenter, connect to the server with Connect-VIServer ESX, make your changes and add it to the vCenter with Add-VMHost.

• problem with variable/table setting

  Hello

  in a flash model, I found several buttons with almost the same action script code. When you press the button a popup window with different text (for each button a single text).

  the following code in the code section, buttons, only the last two codelines are different for each button.

  (release)
  {
  _root.scrHEIGHT = 200;
  _root.scroller.scroller.gotoAndStop (2);
  _root.scroller._x = 100;
  _root.scroller._y = 90;
  _root. TM_title = "Info Box";
  _root. READ = 22;
  }

  so, I think that the entry of the single text for each button is managed in the last line '_root '. READ = 22 ".

  I also found the parts of text of belonging to the library. now, my problem is that I don't know where the connection is defined between the text and the variable READ/table. in this case, the connection is 22, but I find all well in the part of text or the property of the button when the connection is set to 22. I'm using flash cs4. anyone could help me?

  Thank you very much

  Pascal

  You said that you were able to locate the text elements in the library.  What about them implies numbers, you see?  Right click on them and examine their properties and Assembly.

  Also, what do you find in the _root.scroller.scroller framework 2?

• Problem with merged webhelp

  Dear Sir.
  
  My problem is with the merged Webhelp project. links to external topics are not active in the main project, although these links work fine in the HTML help output.
  
  Thank you.

  Have you tried immediately to the notice to this link?

• problem with merged help

  argggh. Ok. I have (I thought) followed merged help from peter grainge on something simple webhelp merged, but I'm a devil of a time to produce the desired result and update the files published to show what is merged (e.g., child projects).
  
  the highest of the directory structure that I use is called fruit. within that I ~ main and ~ sub (with the tildes). in ~ sup
  I have two projects of the child: apples and oranges.
  
  When I publish, the table of contents resulting Watch (repetitions) the parent (what's in ~ hand, not the child projects), and when I look in the Solution Explorer, each project of the child shows the same directory structure as a parent (including the mergedProjects directory). I use lowercase file names when I generate, and even though I specified in each, for example, c:\fruits\testPublish\mergedProjects\apples and c:\fruits\testPublish\mergedProjects\oranges, the result publication shows that the details of the child server go to the directory root (c:\fruits\testPublish).
  
  what the devil? (and btw, I can't get it works correctly using file of demonstration of stone either.) pls help to correct the error of my ways.

  Thanks for the help. the problem has been resolved.

  I was trying in error to build and publish the subprojects in the master, even if their records were not actually in the project (component). Apparently, I was literally reading directions to stone who has not expressly stated I want to build and publish for each individual subproject. Accordingly, I continued to get the master to generate and disseminate within itself.

• Problems with static IP setting for the port forward through 2 routers

  I currently have cable internet connected to a router (Linksys E2000 w / v1.0.03 firmware). This router is connected to another router, a Linksys E3200 with firmware v1.0.02. In order to correctly forward ports through the E3200, I understand that I need to set up a static IP address on the router.

  I almost followed the steps in this video, but when I enter all the IP addresses for the static IP address settings, it allows me to access the router configuration page. I try to get the new IP address that I gave (which he tries to move automatically once I have save settings) and the connection times out. I am able to access internet otherwise, however. From here, I have to do a factory reset on the router and start from square one.

  Anyone have any ideas? I'm quite frustrated and would like to get ports forwarded so I can get my server properly set in place.

  1. If it has connected LAN - LAN you will need to disable the DHCP server on the E3200.

  2. the best option would be to use the 'bridge' on the E3200 mode (in the latest firmware) and connect the internet port to the main router.

  3. If connected LAN - LAN (or in Bridge mode) all internet related functions on the E3200, including ports are not relevant. There is no need to set up the port on the E3200 redirects. All shipping is done only on the E2000 and nowhere else.

  4. What is the address LAN IP of the E3200? What is the address LAN IP of the E2000?

• Windows 7 computer to dial the connection problem with baud rate setting do not stay together

  I've set the com port [converter usb to serial com cable 5] setting baud rate to 115200

  I set up the adjustment [communication between 2 computers cable] modem baud to 115200

  In the center of network share, I create a new network connection [set up a dial-up connection]

  When I check the properties of the dial-up Modem connection set to 19200

  I can't change to 115200 - but the connection is attempted to 19200, so it fails

  All solutions?

  Hello Stephen,

  Thank you for visiting the Microsoft Community Forum.

  According to the description, I understand you are trying to reset the baud rate for your dial-up connection. You tried to change the BAUD rate in your login from 19200 to 115200, but the connection attempt is made at 19200 and if it fails every time.

  I suggest you to check with your ISP (Internet Service Provider), if they have their own custom settings saved using an application that controls the baud rate.

  You can also view the following Microsoft help articles.

  SerialPort.baudrate, property

  http://msdn.Microsoft.com/en-us/library/cc561279.aspx

  SerialPort.BaudRate enumeration.

  http://msdn.Microsoft.com/en-us/library/cc561279.aspx

  Hope this information is useful. Please write us back for any further assistance.

• Problem with customization specifications setting Administrator Password Manager

  I have two problems.

  I have a model R2 Windows Server 2012 in a vCenter 5.1 (Build 1123961) environment. I created a vSphere Client Windows customization feedback, however, (and the main issue) I notice that it does not have the administrator password to what I entered after it don't this is sysprep deployment of a model.

  I've created a script around to do this, which works very well, unless I experience my second question. When customization is started, it creates the event "vim.event.Customization.StartedEvent". He is then supposed to create the 'vim.event.CustomizationSucceeded' event once it has successfully managed the customization, including the command sysprep (and setting the password). Occasionally, but does not trigger the event "vim.even.CustomizationSucceeded" until the days or weeks after the initial event of beginning of customization, which will cause the sysprep crush my difficulty scripts and not allow me to log in under the administrator because of the question first, main account.

  Any thought to why sysprep does not have the administrator password to what I specified in the customization of the OS? Or why the successful event of customization does not always raise after it was launched (in minutes and not days/weeks)?

  I ask just once more: the administrator password model guest empty OS?

  vSphere 5.5 Documentation Centre : you can change the administrator password if the password for administrator on the Windows virtual machine is empty. If the model or the Windows virtual machine already has a password, the administrator password does not change.

• Problem with merged webhelp (Robohelp 10) linking to the child projects

  Hello

  I recently upgraded to Robohelp 9 to 10.

  I used as indicated on the site Web of Peter Grange merged Webhelp. To establish a link between the projects of the child the hyperlink would be entered as:

  .. /Folder/filename.htm

  Since the upgrade to 10 new hyperlinks cannot be entered in this format that the OK button when inserting a hyperlink does not let you save.

  Existing links still work using the format above.

  Is this a change in 10 or I do something wrong?

  
  Thank you

  A clean complete re install of RH10 did fix this problem of not being able to return the railways on the projects of the child.