Major audio problem with merged Clips

Similar Questions

• HP Envy 23 - K030: Audio problems with HP envy 23-K030 and Windows 8.1

  I read all the discussions on audio problems with the IDT High Definition Audio Driver and Windows 8.1
  I get audio on my speakers ONLY and not the headset.
  I uninstalled rebooted and reinstalled the correct driver by this web site of HP support for my machine.
  no luck - same behavior.
  
  The only thing that worked was the IDT driver installation and Windows device driver high definition.
  The headphone jack are properly behaved and everything is ok worked.  However, I lose the audio Panel BEATS and the functions of the Board of Directors of IDT.   (superior quality sound-even with the built-in speakers).
  
  An interesting thing I noticed, when the Microsoft driver is used (and work) on the control panel for this device, it presents "the left panel making" when the configuration screen for the 'speakers '.  for the official driver of IDT, it shows 4 outlets - none of them say "left sidebar", there's rear panel and a plug of façade.    On the old driver that didn't work, he showed "right pane" and there is no control on the right panel.
  
  I think the pilot is simply wrong of this material. The driver is to look 10/2013-it is as if it were updated for this model ALL in ONE - only when it comes to use the headphone jack.
  
  Is there a better driver (I can't "find one beyond 6.10.6486.0 or 6.10.6491 - both had the same problem.)
  
  I do not use my time to often-rarely-last helmet I used them they have worked. Now, they are not - a few automatic updates upset the balance of the force.
  
  Any help would be appreciated. IF not - it is a problem that a person should study.
  

  Also it is reproducible. I have install generic Microsoft driver-headphone jack works and the sound Jack not pregnant, I re - install IDT player - his fate only speakers and not jack.

  I thought about it.

  BIOS V 80.09 (on this wonderful site to Support HP) - does all the work

  V80.05 - did not work properly with this Version of Bios.

  Thank you HP very useful site if you take the time to browse through all the updates.

• Strange behavior with merged Clip

  Hello

  I have images that were synchronized via merged clip. The clips have 5 audio channels. When I replace the clips in the timeline, it enters 5 audio clips that contain the string source 1. It is not 5 channels in the timeline.

  I have my wrong settings or is this another bug with Clips merged into the new version of first?

  Thank you!

  

  Looking at the settings change Clip, you have channel 1 goes to all 5.

• The Audio in a merged clip replacement

  Is there a way to replace the audio of an element which merged already in the timeline with the best audio excerpt of hearing?

  I just finished my edit and improved my audio dialogue at the hearing.  I have the audio "extract" in my bin of clips and I would replace all the changes that I have with this best acoustics to survey.  I tried the option + drag replace the method but it does replace the audio to the correct location.

  Any ideas?

  Thank you!

  Hey Kevin,

  There is a way!  I just thought about it!

  I have my audio excerpt in the clip bin where it should be after that I "edit audio in Adobe Audition."  I then seconded just my audio track Selection tool as they were on the same track.  Then I have relinked the audio to extract audio file extended and BAM!  It worked!

  Understand this output saved me hours or even days to manually replace these audio clips!

• Adobe has not corrected this problem with AVCHD clips extends on?

  I thought for sure that the problem of split clips would be resolved in CS5.  Unfortunately, after installing today, I found that the problem still exists, and I have to continue to use the mts merge tool. It's just another unnecessary step in the workflow. Did I miss something?

  Just to confirm that it was always a problem for me but with CS5 simply import the folder containing the elements - this means that if you use Panasonic HMC150/151, then you need to have downloaded PRIVATE folder structure on your hard disk and then perform a normal import but instead of import files, you need to hit the import > Import folder and select the folder PRIVATE. All your more than twenty-minutes clips now will come clean and put together!

• Audio problem with Skype on the helmet

  Hello. I have a sound problem with Skype on my helmet, when I talk to my friend I can hear him on my helmet, although the rest of the sound on my speakers. How change that so I could hear any sound on my headset?

  You can try this:

  http://community.Skype.com/T5/Windows-desktop-client/Skype-audio-splits-to-both-headphones-and-speak...

• Audio problem with Windows 7

  Hello

  I have successfully upgraded from Vista to Windows 7 and I'm very happy with him... except. Audio glitches!
  With Vista, I have not had any audio problems but now with Windows 7 I. With the help of the dpc latency checker, I disabled all the drivers I could disable but no result.
  Can someone help me please?

  Hello

  What model of laptop do you have exactly?
  Have you installed Win7 its the most recent driver for your laptop model?

• Audio problem with nitro v15

  Hi, I'm on this forum (AGAIN) because I have an annoying problem.
  Sometimes my sound card randomly stops working, I have a red x on the speaker symbol and an error sayng something like "no audio output device installed. Looks like it fixed itself aver a FULL stop, but when I have this problem the pc cannot yet completely shut, it crashes after shutdown with a black screen and the fans of coling at max speed, and I have to force by pressing the button.
  The last time that this happened, that I also had a bsd at the first boot sayng System Service Exception associated with rtkvhd64.sys.
  I already tried to restore, I removed and reinstalled all drivers, nothing works. Once o twice a day I loose that my sound card and I need to do a full restart closure of the pc in the brutal way.

  I'm starting to get tired of this pc, I already changed it TWICE for problems with the trackpad, I bought another in another store that has no problem with the touchpad, but now I have this problem which is even worse.

  Personally, weather or not, I have this problem will be solved, I will NEVER buy another acer pc. I'm running to / from the store with this thing for 3 weeks now, how can we Acer set up a portable 1200 euros in this way?

  http://community.Acer.com/T5/V-and-VN-series-laptops/VN7-592G-blue-screen-after-installed-Windows-10...

  In this section there are other people with the same problem (and a possible solution).
  I really hope this is the last time I have to lose a week to trubleshoot this laptop.

• Audio problem with HP DV7 Notebook

  Hello:

  I have a laptop HP PC 4 year under Windows 7 Home Premium 4 GB of Ram, 64 bit OS.

  I'm not a technology person, so please bear with me...   I had a LOT of problems with programs like Word or Excel (and now also my IE) which gives me a message 'No response' and almost closed on several occasions.  I cleaned up completely my computer about three months ago in the restaurant of a set of restore disks which was prepared, when I bought the laptop, and Best Buy assured me that this would restore my computer as long as "new factory".  However, this condition lasted a few weeks.

  In any case: last week, I took the advice of a consultant Microsoft Community and cleaned my computer using Malwarebytes and then sought an updated on the site of HP driver and installed, and my computer behaves a little better, but I lost my audio cmpletely.  I tried to solve it, and the message says that my audio is "not connected"...

  Any suggestions?  Would be glad of some easy to follow advice.

  Thank you.

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, click computer, left click Local disk C once to highlight, right-click on Local C drive and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  Right plan the audit on the next reboot of the system and then restart the laptop - this process may take several hours before the task in Windows.

  When this is finished and reloaded Windows, download the installer of IDT Audio on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp50501-51000/sp50595.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• NO sound when recording Audio - problems with Windows 7 Ultimate 64-bit

  I got in trouble for almost a year now with NO sound when recording Audio with Windows 7 Ultimate 64-bit. I just found this forum today. It's really weird how recording with windows and other sound recorder works perfectly since 1998 or so until the upgrade to win 7. Now every time I try to record it shows no found recording device or just fails to record any sound. As you'll see below I have activated What U Hear so I can use the system recording features sounds.

  I use the functions of audio recording and pdf reader because I'm legally blind. It is one of the few tools that I could use with ease on all my systems windows for many years.

  A similar question has started happening with nvidia graphics cards. AND... I was led to believe that it was a problem with Sony wanting more strong piracy measures built into windows. Am I correct to assume that this is what is happening with the sound also today or is there a solution to this frustrating problem?

  I run a dxdiag & posted that, according to me, you asked another user on the forum, the same or similar problem.

  Help solve this problem would be greatly appreciated as this has been a problem for quite a while now.

  ------------------
  Information System
  ------------------
  Time of this report: 07 25, 2012, 19:06:02
  Computer name: RAIDER
  Operating system: Windows 7 Ultimate 64 - bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120503) - 2030
  Language: English (regional setting: English)
  Manufacturer: Gigabyte Technology Co., Ltd..
  System model: P67A-UD3-B3
  BIOS: Award BIOS v6.00PG Modular
  Processor: Intel Core i5 - 2500K CPU @ 3.30 GHz (4 CPUs), ~3.6GHz
  Memory: RAM 8192MB
  Available OS memory: 8176MB RAM
  Page file: 2861MB used, 13487 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7601.17514 64 bit Unicode

  ------------
  DxDiag Notes
  ------------
  Display 1 tab: No problems found.
  Sound tab 1: No problems found.
  2 Audio tab: No problems found.
  Input tab: no problems found.

  -------------
  Sound Devices
  -------------
  Description: SPDIF Out (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: Yes
  Default voice playback: no
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes
  Hardware ID: USB\VID_041E & PID_30DF & REV_0100 & MI_00
  Manufacturer ID: 65535
  Product ID: 65535
  Type: WDM
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  WHQL Logo would be: n/a
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Other files:
  Driver provider: Creative Technology Ltd.
  HW Accel level: basic
  Cap flags: 0x0
  Min/Max sample rate: 0, 0
  Static/Strm HW Mix beef: 0, 0
  Static/Strm HW 3D steers: 0, 0
  HW memory: 0
  Management of the voice: No.
  Listen/Src/EAX (TM) 2.0: No, no
  Listen/Src/I3DL2 (TM): No, no
  Sensaura (TM) ZoomFX (tm): No.

  ---------------------
  Sound Capture devices
  ---------------------
  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.
  Driver name: USBAUDIO.sys
  Driver version: 6.01.7601.17514 (English)
  Driver attributes: Final retail
  Date and size: 2010-11-21 13:23:47, 109696 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: No.
  Default voice Capture: Yes
  Driver name: ksaud.sys
  Driver version: 6.00.0001.0460 (English)
  Driver attributes: Final retail
  Date and size: 2010-07-30 11:35:08, 1588608 bytes
  Cap flags: 0x0
  Format flags: 0x0

  Hello

  In Services, verify that the Windows Audio service is running and set to automatic.

  a. Click Start and type Services and press ENTER.

  (b) ensure that these services are defined accordingly.

  c. right-click the service, and then click Properties.

  According to the DXDiag, there is no default sound capture selected.

  Description: Pregnant (Sound Blaster X - Fi Surround 5.1 Pro)
  Default audio playback: No.
  Default voice playback: Yes

  Description: What you Hear (Sound Blaster X - Fi Surround 5.1 Pro)
  Capture audio by default: Yes
  Default voice Capture: No.

  Description: Microphone (Webcam Pro 9000)
  Capture audio by default: No.
  Default voice Capture: No.

  Description: Line-In/Mic-In (Sound Blaster X - Fi Surround 5.1 Pro)

  Capture audio by default: No.

  Default voice Capture: Yes

• Audio problems with Toshiba laptop

  So I have a Toshiba laptop with Windows 8, and the noise on this subject with headphones is way way too low, that he was stronger on my old laptop, the speaker volume is strong so I don't understand why headphones are so quiet that I uninstalled the drivers that came with him and got the generic Microsoft High Definition Audio ones , but that did not help either, I made sure all sound bars are completely upward in the settings of the headset and I ensured that no effects were on and that the quality was 24 - bit, it of just the laptop or is there a problem with the driver? is it possible to simply drive the sound from the speakers in the headphone, or is it necessary that when I plug in my headphones must change the one that says earphones. Help? Basically, it seems that the midrange and treble are too low, while the bass is stronger, it sucks.

  Hi Pawel,

  Sorry for the late reply.

  1. Press Windows + X key.
  2. Select Control Panel and then Sound.
  3. Right-click on "helmet", and then select Properties.
  4. Go to the tab improvements .
  5. Ensure that "disable all enhancements" is selected.
  6. Save your changes.
  7. Restart the computer

  Let us know if you are facing a similar question after the computer is restarted.

  Get back to us with the the model number of the laptop, you face problems with so that we can help you.

• File restrictions not met does not, major security problem with Reader shared.

  Summary: it is possible to transfer files freely between host and virtual machines, but are not limited to declared Shared Folders.

  I'm under VMWare Player 6.0.3 + tools under Win7/32, generally without problems. However, I just found out what seems to be a major security problem; It may have been there for years, I never checked. On a CentOS Linux VM and a Windows XP VM, I put folders always active; two folders are shared, C:\Users\ < name > \Desktop\VMWare (a subdirectory on the desktop) and R:\ (a RAM drive). "Card as a drive in Windows network, you can" is checked in the virtual Windows machine. There is no option for a folder always be not shared, the other only until the next poweroff (re point 2 below). I did some tests and was able to easily drag and drop files from the two virtual machines (running at once) to the host WITHOUT RESTRICTION FOR THE SHARED FOLDERS; I copied the files of the computer desktop virtual on the desktop of the host (not the directory said 'VMWare'), the office of the host on the desktop of the virtual computer and directory host random (C:\TMP) on the virtual machine, and then again to the desktop of the host.

  1. serious, important question: the VM seems to have free run of the host, not only in the shared directories.

  2. point minor: indicates the VMX (all below dossier_partage) file < sharedFolder0.expiration = "session" > but < sharedFolder1.expiration = "never" >; should not be the same thing, 'never' as records of actions are always enabled?

  I have shared folders only through settings, no direct VMX edition. The VMX has:

  sharedFolder.maxNum = '2 '.

  sharedFolder0.present = 'TRUE '.

  sharedFolder0.enabled = 'TRUE '.

  sharedFolder0.readAccess = 'TRUE '.

  sharedFolder0.writeAccess = 'TRUE '.

  sharedFolder0.hostPath = "C:\Users\ < name > \Desktop\VMWare.

  sharedFolder0.guestName = ' transfer to '.

  sharedFolder0.expiration = "session".

  sharedFolder1.present = 'TRUE '.

  sharedFolder1.enabled = 'TRUE '.

  sharedFolder1.readAccess = 'TRUE '.

  sharedFolder1.writeAccess = 'TRUE '.

  sharedFolder1.hostPath = "R:\". »

  sharedFolder1.guestName = "RamDrive.

  sharedFolder1.expiration = "never".

  That concerns me; I sometimes deliberately tried to expose virtual machines to viruses, in the hope that there is a Chinese wall between the host and the VM, except for shared directories.

  I am dong something wrong, is this expected behavior or is it an error in VMWare Player?

  Best wishes

  Looks like you're confused shared with drag-and-drop folders.  With shared folders, the host files are mapped in the comments (possibly as a Windows network drive).  Navigate in the comments under \\vmware-host.  Drag-and-drop is a completely independent feature.  There is no restriction on access to the drag-and-drop.  To disable drag-and - drop in VMware Player, power off the virtual computer and add the following to your virtual machine configuration file:

  insulation. Tools.Copy.Disable = 'TRUE '.

  insulation. Tools.dnd.Disable = 'TRUE '.

  insulation. Tools.Paste.Disable = 'TRUE '.

• Audio missing in merged Clips

  Well, editing a feature film on the first CC.  Just import a project in my project work containing clips merged using my 2nd audio and video source (red image), I've created.  The files were all renamed in first to match the numbers of scene/shot.  Kept than merged clips, deleted the rest of the project's working folder, as I did for all the other clips that work perfectly well.  Edited the videos last night, works perfectly.

  Reopened the project this morning to continue working, and now all the clips have titles dead as no audio.  The real tracks are there, but there is no sound.  I doubled clicked on just the audio track of the element in the sequence, and it is red in my source window.

  How can I fix?

  Hi rhead12,

  Please, do a right-click on the audio in the timeline panel and go to audio channels, and if the source channels are set to none, change them left and right and check.

  Kind regards

  Vinay

• Problem with MERGE INTO setting

  Oracle Hello community,
  
  Server: 11.1.0.7
  
  My MERGE statement is very slow. I cut again and made a single update and a single insert statement, and it is much faster, the cause of a suspicion / * + rule * / use. When I try to use the same trick for the MERGE statement, it won't work, it still takes much too long. Before I post my Merge statement, is the problem with advice and FUSION?
  
  Ikrischer

  Thanks for all the entries that you have provided.

  What intrigues me is the fact that your cardinalities are always 1.
  (Unfortunately I have no available DB 11.1)

  When I run the routine, all the tables are empty and all tables are analysed.

  Can you describe your routine more in detail?
  What measures are being processed?
  Is it a kind of ETL process? At what point in your process are you collecting statistics and how?
  Are you really using the command "scan table", or are you using "dbms_stats.gather_table_stats?

• Audio problem with Hp envy tochsmart

  Hello this is krishna.

  I am facing sound problem with laptop Hp envy touchsmart. When I play something indicating an error. then follow by restarting the computer laptop im getting sound properly. im not what problem.please help

  Hello

  Try the following.

  Open windows control panel, open Windows Update, select "View update history" in the left pane and then select "Installed updates" link in the next window.

  Locate the KB2962407 update, right click and choose uninstall.  Once completed, restart the computer, open windows control panel, open Windows Update and select "Check for updates".  You will see the update that you have uninstalled just offered once again - right click and select "Hide update".

  After that you may or may not need to remove and reload the sound driver - if you do, how to use Recovery Manager to reinstall the drivers and software is detailed in the document in question on the link below.

  Recovery Manager - Windows 8.

  Recovery Manager - Windows 7

  Kind regards

  DP - K