Problem with module 3G Tecra R10 - 10W

Similar Questions

• Tecra R10 - 10W - crashes with the nVidia display driver

  Dear Sirs,

  Two days ago, I bought my new Tecra R10 - 10W. I used the recovery disk to put Windows XP.

  However, I get a blue screen randomly. I turned on the 'Check' tool and I got: error of e/s in wmiaci.sys system. Error 20th in B9B8752F. I figured that the nVidia driver and uninstalled it. The problem disappear. But when I try to install on your site the appropriate driver: display - 20081110130507.zip the system blocks blue with the same error.

  Please help me.

  Hello

  Which is really strange, buddy

  Hmm, I think that before installing the display driver you must clean your system using CCleaner. This freeware tool removes the old driver files and cleans up the registry. Then, restart the installation of the laptop the latest driver on the official website of Toshiba.

  Furthermore, you also update the BIOS? You can find it on the Toshiba site too. :)

• Tecra R10 - 10W - CMOS battery error and the next mistake of bios password

  I have some old Tecra R10 - 10W

  Aftert long in the cupboard, it says CMOS battery error and after charging I can't start on the old password (bios) system.

  How to reset the password of the bios and is also required for cmos battery and I can do it myself?

  I thank...

  You can change battery cmos your np for bios pasword use google auto, I hand a mini hp with the same problem and initiated a program that has been reset using error code when it is inserted the wrong password 3 times into the line, then I used the error code in the program and got the password restarted hp and password inserted now is job bp. Do I have also an old tecra and difrend problem with it, everything in good standing sims but used laptop start first ferry, after several restarsts shovs splash screen, then runing bp, restarted again, same story, it restarts several and then is runing again, leading with outside the same monitor thing, ideas?
  Here is the link for your problem and sulution: http://dogber1.blogspot.com/2009/05/table-of-reverse-engineered-bios.html

• Tecra R10 - 10W PCI configuration simple controller-Wireless manager

  I have a Toshiba Tecra R10 - 10W. I installed win7 and in Device Manager, it cannot find the driver for "PCI configuration simple controller.

  Also when I try to use the Wireless Manager Toshiba for 3 g it is said that the radio is off, but in reality the trigger and the WiFi works.

  Perhaps these two errors are connected.

  Thank you

  Hello

  I think you need the driver Intel AMT controller (Intel Active Management Technology).

  As far as I know, you can download this driver Toshiba driver European page or the page of the Intel driver.
  In this case, you will need to search for Intel Management Engine Interface driver

  > Also when I try to use the Wireless Manager Toshiba for 3 g it is said that the radio is off, but in reality the trigger and the WiFi works.

  WLan is not 3G use Fn + F8 to toggle the WiFi, Bluetooth and 3G.
  I think you have to press this combination of button several times to get the right setting

  Welcome them

• Tecra R10 - 10W - cannot create partition during installation

  Tecra R10 - 10W I and I went from Vista to XP. I used the Windows XP Toshiba Recovery for this disk.
  I was not able to create the partition on the hard disk during installation.
  I wonder I missed something?

  How to cut my hard drive into 2 parts? Should I re - install XP for it?
  Please help me?

  Thank you

  Alper

  Hello!

  As Akuma writes it of not possible to create or modify partitions of HARD drive during the installation of recovery Toshiba.
  The Toshiba Recovery disk contains an image of the factory settings, and after that you can change the size of the partition yourself.

  I also use Partition Magic and it works really well. If you n t have this tool, you can Google for a freeware tool. ;)

  Good bye

• How to change the HDD in Tecra R10 - 10W - any instructions?

  I would like to install windows 7 on my laptop R10 - 10W, but for now only for test.
  I would like to save my current installation of Windows XP on my HARD drive.

  The simplest solution is to change HARD drive but this laptop has no available HARD disk. :-(

  I tried to boot from the HARD drive connected via esata, but it is not functional. :-(

  Anyone have an idea?

  Thanks Karel

  > More simple solution is to change the HARD drive, but this laptop has no available HARD disk
  What do you mean by inaccessible HARD drive?

  If you want to install the Windows 7 only for the test then you don t have need to change the HARD disk or delete the Win XP from the HARD drive.

  One solution might be to an installation of Win 7 on the second partition.
  Create a partition on the HARD drive using a 3rd party like Partition Magic 8 tool. This great tool and allows you to create and manage the partition.

  Another option would be the use of virtualization.
  You know the Virtual PC?
  http://www.Microsoft.com/Windows/Virtual-PC/

  It helps you to install each operating system that you want on the HARD disk without having all partitions.

• Tecra R10 - 10W / R10 - 111 3 G module problem

  Hello

  Module 3G does not work after the update. NA? find answers online. Maybe you know what to do:

  When I start the system from scratch, I just open the software Connect from Toshiba and the laptop connects after the network authentication. Usually after a certain time the yellow triangle with exclamation point appears and from that moment the system is connected limited/locally only. When I use vista tools to set up the problem I get the message that there could be a problem and I should connect via another network (lan, WiFi, BT, a? ¦) a? not really a solution to my problem!

  To restart the internet I need to disable the Toshiba g 3507 module and stop the wireless software Connect, wait about 10 seconds and then re-enable the module and restart wireless connect software. In fact, there is no option in the turn off the TPM in the wireless not connect software. When you work with my laptop, I need to reconnect it several times per day and this very annoying. Toshiba could not help me? They told me to call the hotline!

  I did all the updates that are provided by Toshiba, but it does not change.

  Any idea?

  See you soon
  Patrick

  Maybe the SIM card is loose, have you tried reinstalling the SIM card?

  Have you also updated the BIOS?

  Did you install any other software that may be contradictory? (For example, a USB 3 G external or similar device)

  Have you tried running the recovery to reinstall Windows.

  If it still does not work, then it might be a hardware problem, in which case you will have to send the laptop to an ASP for repair. The list of ASP can be found on the Toshiba site (the site of www.toshiba-europe.com assuming you're in EU)

• Tecra R10 - 10W / R10 - 111 3 G module problem see also messages from May 25

  Thanks for your fast replay.

  Yes, I have tried to reinstall the SIM card and updated everything what is possible from the homepage, Microsoft and Toshiba. No external devices (e.g. 3 G USB) installed and windows is retrieved by a full licensed Windows Vista Business (No. Toshiba OEM more) just a couple of days.

  The only thing I discovered is that the 3G module Firmware is not updated. I didn't recognize the pop-up window when before updating, but yesterday, I got the day when/after massage:

  "Generation data has not changed, probably failed update"

  I tried to update with an activated, a connected and a module 3G disabled (in that order) but no change. I always get the same message once the module is restarted during the FW update. The module was not disconneced by stopping the system or any other stop option during update FW (as read in the instructions). The old FW was working fine until I did some updates to the Toshiba homepage (always ask Tempro). Any idea?

  Control on while you try to update the firmware with the original image of Windows from Toshiba?

  Where did you got the firmware?

• Satellite C660 - 21 c - problems with modules of RAM

  Hello

  I was considering upgrading my RAM for my C660 - 21 c from 4 GB to 8 GB. So I decided to leave my 4 GB of ram in the ram slot to see the name & type of latter. Once I did, I inserted it, however, now, when I press the power button, the laptop turns on for about 5 seconds then turns off.

  I checked the stick of ram in both slots and it s certainly equipped properly. Is could someone please tell me what is the problem? I got a stick of ram dead for some reason any or if I've done a few other serious effects for the machine, i.e. static destroying the ram or the whole machine?

  Could someone help troubleshoot the please my problem?

  Thank you

  Chris

  Have you unplugged the AC adapter / CC and removed the battery before you start playing with the memory modules?

• Problems with Module Ajax crawling

  Hi all

  I have a problem to crawl on the homepage of my site, and robots do not seem to go the home page (for the analysis of the links) because the data that is retrieved by a module Ajax. I am trying to find a way to make the explorable links, my approach would be to show a different view when Javascript is disabled. I just need validation that would work the code below:

  <!-start world-content->

  "" <div id= "global-good" > <! - beginning of ajax content - >

  Tourisme Laval - lots of business to do < h1 > < / h1 >

  < ul >

  < Li > < strong >Hotel Laval < facilities > : Laval offers many accommodation throughout the year. < /li >
  < li > < strong > Cavalia ODYSSEO - from 14 may2013 / < facilities >: after a year of triumphant North American tour, Odysséo returned to Quebec, Laval! < /li >

  < li > < strong > World of Loto-Québec Laval - 19 June to 7 July2013 / < facilities >: the world Loto-Québec in Laval is without a doubt the summer festival in Laval with hundreds of music shows pay everyone. < /li >

  < /ul >
  <! - end of the ajax content - >

  < /div ><!-end of the overall content->

  By placing the HTML replacement here (who would be replaced on loading AJAX content), it would be sufficient for the links to be explored?

  Thanks for your help!

  Helene
  

  In other words, this explanation, I wouldn't be able to add tags html within the

  You feel the explanation (which is awkward in any case).

  Nothing would prevent you from placing HTML tags within any block element - that's what they are for. And its use is ideal for your purposes, I think.

• Unusual problem with module LR 5 development - not the whole window is selectable to zoom in, that the right and the bottom of the window of the screen

  Searched but to no avail.

  I development of images in module development and must have something, I couldn't zoom in or "right-click" (I'm on a MBP) in the window of developer to add color annotations. Very frustrating.

  I realized that the right part of the window of developer and the lower part of the horizontal were selectable, but it makes trimming and zoom a real pain.

  I am sure that there is a switch or some other config in LR to make the entire window develop selectable, there are 'handles' in the area between selectable, not when you hover nearby, but they seem not to be mobile.

  The dev module is set to FIT BTW.

  Maybe it's not the question, but the symptoms sound the same. There is a known problem on the Mac where the secondary window causes a loss of input of cursor over the region where it was exposed (even if you have closed the it). If it's the case in tilting the window on and out again will work around the issue.

  Lightroom: Window blocks clicks even when school closed after the passage of the office space

• Tecra R10 - 10W - charge when the battery fully

  Hello

  I have this laptop for a few weeks and his strange behavior. Lets say I use this connected to AC and the battery is charged to 100%. When I disconnect from AC from one day to the next and connect it again in the morning, he begins to charge the battery, even if it is charged to 100%. It charges the battery for 5-10 minutes.
  Does anyone have a similar experience?

  Other portable wait until the battery level reaches about 95% before loading. Is there a way I can influence this behavior? I guess that this short of frequent charges is not good for the duration of battery life.

  Thanks for your opinions.

  Hello

  > Lets say I use this connected to AC and the battery is charged to 100%. When I disconnect from AC from one day to the next and connect it again in the morning, he begins to charge the battery, even if it is charged to 100%. It charges the battery for 5-10 minutes.

  As Akuma has suggested, it's a normal question.
  Nothing unusual, because the battery loses power even the laptop is turned off.

  Here is one of the Toshiba articles:
  + Why my laptop loses 2 to 4% of its energy from the battery whenever I turned the unit off and turn it back on? +
  http://APS2.toshiba-tro.de/KB0/FAQ6301EP000ER01.htm

• Toshiba Tecra A3 - problem with Port Replikator III

  Hello

  I have a problem with a Toshiba Tecra A3 combined with a Port Replikator III. Both work very well together until you disconnect the laptop computer. After you start the Toshiba Tecra A3 without the Docking Station, everything is always ok. But when I anchor again and start it, Win XP is not able to display the logon session on the external monitor screen. All configurations, I did (for example only display on external monitor) with the mobile extension module are only available after login. But when I don't see the logon screen, I can't do that; (o). so, does anyone have a solution how can I use the external screen after the boot (without using the FN + F5) key.

  any help is much appreciated
  Thank you
  Mario

  Hello

  As far as I know logon window can be displayed on the primary monitor only. Computers laptop LCD is set to a primary, and it cannot be changed. As you can see this option is grayed out in display properties.

  Good bye

• Tecra R10 - TrueSuite Access Manager doesn't work with IE8

  Fingerprint software does not start after you install Internet Explorer 8 in my Tecra R10 TrueSuite Access Manager stops working that is when I open a site that requires the login/password.

  I've updated the TrueSuite Access Manager to the latest version 2.5.28.0 but the problem remains. From the console to access the password Bank Manager the program stops responding.

  Operating system: Vista Bussiness 32 bit
  Internet Explorer: 8.0.6001.18702
  TrueSuite Access Manager: 2.5.28.0

  Does anyone have an idea of the problem?

  Thank you.

  Hello

  Have you tested with IE7?
  Did this happen using the preinstalled Toshiba OS and Windows with IE7?

  If this n t happens using the IE7 while there may be a compatibility issue between the two parties; IE8 and TrueSuite Access Manager.

• TECRA A10 - 11 M - problem with TOSHIBA accessibility

  Hello to the forum.
  I have a TECRA A10 - 11 M (a Greek market system) and after I faced many problems with Windows VISTA
  I installed with Windows XP Professional, the legendary Microsoft OS recovery CD.
  Here I have faced a problem with my buttons of accessibility. My function keys do not work!
  The message is: this system cannot be used "TOSHIBA accessibility.
  I uninstalled and installed again the feature, but nothing happened.
  Y at - it a program known that affect my system and prohibits any accessibility to work properly?
  Can anyone help with this?

  Thank you in advance,
  Vassilis

  _ @ dvass66_
  The FN keys need to installation of common Modules and Hotkey utilities for display devices.
  Common modules must be installed first!
  Also I recommend the update to the BIOS too

  _@korenisko_
  > I think that problem on this laptop is Wifi Atheros card
  I put t know why you think this, but I put agree t
  I have Atheros WLan card and since I use the latest BIOS and WLan driver everything works perfectly.
  Vista turn too stable, but indeed it needs MS patches and update my Vista updates more than once a week...