Unusual problem with module LR 5 development - not the whole window is selectable to zoom in, that the right and the bottom of the window of the screen
Searched but to no avail.
I development of images in module development and must have something, I couldn't zoom in or "right-click" (I'm on a MBP) in the window of developer to add color annotations. Very frustrating.
I realized that the right part of the window of developer and the lower part of the horizontal were selectable, but it makes trimming and zoom a real pain.
I am sure that there is a switch or some other config in LR to make the entire window develop selectable, there are 'handles' in the area between selectable, not when you hover nearby, but they seem not to be mobile.
The dev module is set to FIT BTW.
Maybe it's not the question, but the symptoms sound the same. There is a known problem on the Mac where the secondary window causes a loss of input of cursor over the region where it was exposed (even if you have closed the it). If it's the case in tilting the window on and out again will work around the issue.
Lightroom: Window blocks clicks even when school closed after the passage of the office space
Tags: Photoshop Lightroom
Similar Questions
-
I have problem with wifi iphone 6 s not connected...
I have problem with iphone 6s more wifi not connected...
I'm having the same problem and tried all the fixes I found online and nothing has worked so far.
-
Question
I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the mode 5 firefox safe and always without success. Help, pleaseTo help other users find solutions, please come back to this Thread and connect you to the
Forum with your user name and password:Click on 'resolved' beside the answer above that BETTER resolved your issue
DO NOT CLICK on 'Solved It' next to this answer
-
I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please notify.
reset your preferences-
Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html
Adobe media encoder: https://forums.adobe.com/thread/1713540
Legacy: http://helpx.adobe.com/after-effects/using/preferences.html
Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html
Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html
InDesign: https://forums.adobe.com/thread/526990
Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html
Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0
Photoshop: https://forums.adobe.com/thread/375776
Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html
First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html
-
I have a problem with creative cloud applications is not to be downloaded or updated date on my i mac, current applications, I still have work. I uninstalled the cc application and re-installed but without success, on the applications tab there is no code error only saying download error out area allowing you to charge applications call does not work... any suggestions?
Hi James,
Please follow the article: CC help | Download error in the applications tab of Creative Cloud Desktop Application to get this fixed number.
Please let us know any questions.
Thank you
Yann Arora
-
I installed Adobe CS6 Design & Web Premium on my Mac Book Pro a few years ago, but repeatedly encountered problems with programs freezing or do not open correctly. It is a student and teacher license version so a University identity is required, but I'm no more a student - can I always reinstall it from my academic ID may no longer be valid?
Erin Elzo as long as serial number has been registered under your account at http://www.adobe.com/ , then you should be able to continue using the software. You can find details on how to locate your serial number registered to find your serial number fast - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.
-
Problem with TC loss of connection to the modem cable
I have a TC of 2 TB which is connected to my ISP provided by cable modem. It worked fine for 3 months after the installation in December, but now all of a sudden it will lose its connection to the modem and we lose our wireless internet. We have replaced the modem cable and it does not solve the problem. I have to reset the TC 2 - 3 times a day. Nothing else has changed recently with regard to the network set up. that only changes were to specific devices that use the wifi connection, and this was always something changing, depending on the devices we use. Any thoughts? I'm not a savvy person tech, BTW.
We need to ask a few questions in order to learn more on what the possible cause of the problem might be. Please be patient with this. Thank you.
What is the number and the model of the modem you are using right now? We ask because some modems work better than others with Apple routers, and even if you have changed the modem, it could still be a model who does not get along well with the Apple router... or... you could say that the router from Apple does not get along well with the modem.
How old is the TC? We ask because the life expectancy, on average, a time capsule is about 3 years. After that, they tend to start losing connections to an ever-increasing rate.
Who is your provider of Internet (ISP) Service? We ask because most suppliers are in the active process of implementation of a new type of connection called IPv6 in their systems... and despite ISPS claiming that their system changes should cause no difficulties connection or interruptions system... which doesn't seem to be the case at all.
We have seen an unusual number of reports from users who suddenly have problems with their ISP connection, when things were very well for many months before. That points directly to the IPv6 changes that ISPS are doing as the culprit. In some cases, there could be way to work around the problem, and in some cases, there is nothing to do but wait as the ISP to complete their changes and be everything to speed.
-
my system does not start upwards - don't stop progression blue bar that goes round and round. I can boot into safe mode and safe mode with networking mode.
Hello
As you are able to boot to the desktop in Mode safe, it means that the third-party application prevents the computer from starting in normal mode. To check you can configure the computer to clean start State and then try to boot into normal mode and check what is happening. To set up its own start-up follow the link below.
http://support.Microsoft.com/kb/310353
If the problem does not continues when the computer is in the clean start State follow the steps listed to identify which application is causing the problem.
Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
See this thread - https://forums.adobe.com/thread/1749661
This seems to be a problem with Content Viewer (v32.5) in the App Store.
If I build one from the App 32.4.4 Constructor (same v32.5), the bar is in its original position.
Not a solution, but could be a workaround for some until this problem is corrected.
-
I'm having a problem with my Opnegl ver 1.1, must be updated 1.3 for some reason that I can't seem to update or to locate in the profile of my hard drive... ERRRR... of suggestions?
Update your video card drivers. Bring:
1. site of the device mftr. ; OR
2. site of the card mother mftr. If the material is on board; OR
3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).Read the installation instructions on the Web site where you get the drivers.
To find out what hardware is in your computer:
1. read all documentation that you got when you purchased the computer.
2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.http://www.belarc.com/free_download.html - Belarc Advisor
http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic! -
I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?
Thanks Ray,
Hello... How can I get the manual download for all the error on any printer laser color spray top of HP range.
Kind regards
Monday Nwankwo
-
Hello, after 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear... what should I do? Help, I don't want to say 'goodbye' to it already... Thank you
It could be the plug on the computer that is the cause of the problem. Try another helmet or a pair of speakers in it.
If you hear only on one side, who will tell you that is the question.
If you hear from both sides, you must obtain a new helmet
Software will fix either of the foregoing...
-
Problem with anchor points, shifts vertically in the browser view. What is the problem?
have you allowed for the height of your head? I had to put my anchor above my content by the height of the header, otherwise, the upper part of my content was hidden behind the header
-
I have a problem with a card being inadmissible for the zoom on a phone.
I have a problem with a card being inadmissible for the zoom on a phone. The Web site has been formatted for the phone using Muse. The plan should be saved in a way in Photoshop or y at - it a setting in the Muse who can fix this?
Please provide more details, as if the card is integrated an image or a real map generated by widget.
The generated plan must zoom in/out.
Thank you
Sanjit
-
Hello, I have problems with Adobe Creative cloud to open it in Windows 10
Hello, I have problems with Adobe Creative cloud to open it in Windows 10
Please try run as administrator. Is there any message you get at the launch of the cloud creative app?
Maybe you are looking for
-
I'm trying to set up a homepage on my Android mobile device. All changes must have access via the menu. It works fine on my desktop computer, but there is no menu button on the mobile version.
-
Connection for my webmail portal no longer works since 5.0
Solved thanks
-
How can I change the font size, when you tapoterez the mouse twice?
Double tap on done mouse the way to large font size, how can I reduce it?
-
HP envy 15-j140na: maintenance of fan for a hp envy 15
Hello. I am the owner of a HP Envy 15-j140na and wonder about the maintenance of my computer, I had the laptop for over a year and the warrinty has expiered, unfortonatly is when defects and problems begin to occoure in my computer, like the fan. The
-
HP Officejet 7610 full-size all-in-one printer, photo printing problem.
When you print pictures on the HP Officejet 7610, pictures come out with excessive and unclear ink. I use the HP Photo paper for this task (4 "x 6"). Suggestions how to eliminate this problem?