Problem with Multiple Choice Quiz

Similar Questions

• Problem with multiple downloads with the router. Allows you to change the TCP MSS value?

  Original title: TCP MSS

  Hi all.

  I currently have a problem with multiple downloads with my current router.  If I have two current downloads at the same time I have no access to all web sites.  It's almost as if the downloads take my meaning of bandwidth there is more nothing for ordinary surfing.

  As a test I put an older router on my system and have a significant improvement in performance.  I have 2 downloads in progress and also surf at the same time.

  To compare two routers, I noticed that the only real difference between the two is that the TCP MSS value is set to '0' on the router of the problem, and then assign him 1392 (MTU - 40) on the router to elderly who gives better performance.

  It is my understanding that this value governs the size of transmitted packets.

  My question is this:

  What is the MSS value which is causing the problem?

  Congratulations in advance.

  Be sure to interpret the values. The '0' means no not literally because the link would not work. It is likely, that it allows the local device set limits for the link. Don't forget that there is a Maximum value and as such can be any value up to such limit as defined by all devices in the path.

  You can try capping manually but it is unlikely that any local limit will come to effect unless you set very low.

• Small problem with Captivate 6 quiz...

  I wonder if someone could help me with this little problem with Captivate 6 quizes?

  I've set up a quiz and disable the playback bar to save screen space

  I turn off the button 'next' on the issues because it allows to the learner in order to bypass the unanswered questions (and does not trigger the incomplete caption)

  And so I rename the button submit to 'next' - and that's fine, but when the quiz is reviewed there is no 'next' button to navigate between issues

  I thought that I might be able to hide the real button following behind the submit button (labeled 'next'), but finds that it is not possible to change the stacking order of buttons issue

  So, how can I stop the learner without going through questions without answer AND allow navigation during the review of the quiz?

  Pointers gratefully received

  Simon

  Hide the next button (Skip) under the clear button.  When you add a quiz for the Clear key is usually on a higher default stacking order.  But if it isn't, just remove and replace the button 'Clear' and it will be over the next button.  Usually, removal and replacement of the buttons on the quiz questions are the only way to manipulate the stacking order.  It's a pain, but this is easily achievable.

• Multiple Choice Quiz Score

  Hi all

  This is my first post here, so apologies if I break the unwritten rules, or say something ridiculous, please bare with me.

  So, I created a quiz of multiple choice in my multimedia project using Flash CS5 and wanted to know how (or if) I can integrate a scoring system for the existing quiz.

  I created the quiz using the timeline and layers. For each question, there are three layers;

  Layer 1 - Question w / four possible answers (only one is correct)

  Layer 2 - correct answer

  Layer 3 - incorrect answer

  I use buttons to navigate through the timeline.

  What I want to achieve is, at the end of the quiz, a score to generate based on the questions they got right.

  I hope I've included everything you need.

  Thanks for reading and possible assistance.

  Create an action layer that extends along the timeline and frame 1 create an outcome variable.  As you go with the quiz, addition/subtraction value to this variable to true or false answers.  Until this layer extends until the variable is available to be changed, that in the end will be equal no matter what either believe it has accrued.

• Adding more than four levels of failure in a multiple choice quiz (5 Cp)

  Hi-

  I am currently using Captivate 5. In a quiz of multiple choice with five possible answers and only one good answer, I am only able to select up to three levels of failure. This means that if the student is wrong four times (and selects each of the four incorrect answers before finally choosing the right pair), he or she will not be served a failure with the fourth wrong answer message. Is there a remedy for this situation?

  I would like to know if I was unclear, or if you could use more information.

  Thank you!

  wcramblit

  Several slides question and answer do not have the option of advanced responses.  Yet true/false questions do not have it.  It's only for the Multiple choice questions.

  You can save a feature request for this.  Every vote helps little.

• Problems with multiple worksheets XY plotting (program generates repeated data)

  Hello

  I want to make a small program that will reduce the amount of time to go forward with the measurement data. I get data into .dat format, where all the files consist of frequency measurement with an X and a Y column. The problem is that I made 4 experiments (X column is the same for each experience) with 15 measures file each and more than 500 points of measurement in each file. I would like to make a simple manipulation and this copy that information to a file with same X column and multi-column, later I could use these data with Excel or origin (do it manually, it's frustrating and time consuming).

  At the beginning my program reads the background information with X and Y (b), and after I open the worksheet to insert the X and data of Y (n). (make a simple manipulation, like dividing Y (n) /Y (b), program show a graph of the current data and another graph multiple data, which are stored and must be exported in .txt, .dat or directly to Excel (which is more preferable)). I'm OK with the opening of several files of data, but which are not okay with copy/paste file and handle all that data manually, but that's my motivation for this program.

  The attached example can do all this (except for the entry in the file). He draws multiple charts on a XY chart using cluster and travel records. It is even possible to extract data in Excel, all that graphic, but the real problems comes with data are always added because of the loop. This gives a lot of empty and repeated data later. I'm jonesing to get rid of this. I have also attached several files of measure: 1 background and 3 measures.

  P.S. I tried to save time thanks to this program, but now, I spent more time than if I did it manually

  Your program absolutely no sense. What is the purpose of the structure of sequence? It just sits there, operating both in parallel to the while loop. Probably that you read from the local variables before other parts of the program had a chance to write valid data for them.

  In the while loop, you have a case of timeout that adds the same data over and over again, every 50ms. Why?

  Your mechanical actions "switch release" are misguided. Use actions to latch and remove structures deal as part of the event.

  Try to rethink the problem once the mode, and then solve the problem with 20% of your current code. See how far you get.

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Major problems with multiple items of page on the web viewer since the last update

  In the last days, we had problems with all our multiple page items that are newly updated or added on the web viewer.

  Scrolling of pages just to repeat content again and again and true articles page see first pages content overlaid on all subsequent pages. It seems that something important broke in the way that the dps push articles to the webviewer, as is happening through fact sheets and articles. This means that we cannot publish anything until it's resolved.

  Someone knows something similar? Any suggestions?

  Hi Lucie,.

  Please contact support for assistance with this enterprise. They can investigate and open a support issue with if necessary engineering team. Contact information is available by logging into http://digitalpublishing.acrobat.com/ and looking at the Middle bottom of the screen.

  Neil

• Problem with multiple threads

  I have a program that interacts with an ESX 3.5 server using the VIX API, written in c#. I'm from multiple threads in c# program with each thread running an automation process which creates a connection to a virtual machine on the ESX Server, some automated process, and then disconnects. I'm having problems with this. When I call Disconnect() from one of the threads, it seems to cause problems with my other son if they have not yet disconnected. I connect to an another VM on the server in each thread. The problem is if I don't call disconnect, I get errors, but if I call disconnect in a thread it causes errors. Y at - it something similar? Any suggestions on how to make this run smoothly? Thank you!

  This sounds a lot like you are getting hurt by the host sharing of handle.  If HostConnect() is called with the same parameters, the handle of the host gets reused.  HostDisconnect() will clean this handle, even if his commune.  It's actually documented behaivior.  We have also decided that there may problems like the one you have reached, so it will be removed in a future release.

  So your application will share the handful of host among all discussions, and as soon as we call disconnection, the host handles in other countries also becomes invalid.

  Make a unique HostConnect() and share this handle inside threads is a way to avoid this.  HostConnect() is generally quite expensive, so we recommend in all cases.

• Creating an ebook with multiple choice questions

  Hello guys,.

  I am interested in creating an ebook pdf with the following characteristics.

  (1) it is divided into chapters and each chapter ends with a series of questions multiple choice (one answer)

  2) there are 3 'events' again in the form of multiple choice.

  What I want is, who bed the book should be able to check/radio click on the right answer. I mean that if there are 10 questions, the user should be able to click on the ten answers and then, ultimately, click a button to check the score.

  If the above process is very difficult to implement, at least, it should be able to verify the answers to the question immediately (as if he chooses a wrong question, he should get a red mark or something)

  Can I do this with a software such as Acrobat or Indesign?

  Thank you

  Yes, you can do this by creating form fields in Acrobat after you create the ebook in PDF format. The latest version of InDesign allows you to add fields that become form fields when the document is exported as an interactive PDF. For scoring, you will probably need to use JavaScript, but it will probably not too complicated. People in the Acrobat JavaScript here forum can help you with this part. If you need assistance with the part of forms, see the Acrobat help doc or ask in the forum forms Acrobat here.

• Multiple choice quiz slides - long delay when you click on the radio button

  Using Captivate 5.5 and slides of quiz of multiple choices, when previewing the project, sometimes there is a delay after clicking on a choice. The delay is sometimes so long that the learner may feel like they are not able to select a radio button option. Does anyone know a way to speed up the appearance of the dot that appears when a learner clicks on a radio button?

  Hi Jay,.

  I would have asked to see the chronology. In a blog I explains the features of the glide of the Question and think that you can't find the answer here:

  Question Question slides

  Short answer: on the timeline, you'll see a suspension point, which is used twice for the slides in question (see the two-step process in blog). Default setting is to have only one break point at 1, 5secs for a default slide duration of 3secs. The actions on the success and after the last attempt (see properties Quiz, accordion Action) are both set to "continue". This means that after the second stage when you expect to proceed immediately to the next slide, the reading head is just to continue until the end of the slide (length by default = 1.5secs). Wondering if you perhaps make longer editing.

  What is possible: drag the point of suspension on the Timeline, close to the end of the chronology of the question slide. Or set the action to 'Go ├a next page' instead of continue.

  Not sure if it will help because I do not see the timeline.

  Lilybiri

• Problems with multiple framerates and Blackmagic Decklink 4 K Extreme reading

  Recently, I exchanged by AJA Kona card for extreme Blackmagic Decklink 4 K in order to get external followed in DaVinci Resolve.

  I work in a 1080 p 23.976 project that includes a 29.97 SD and HD images. Loading these images of 29.97 FPS in my layer source footage, I meet regularly with frozen reading (the triangle of game in my toolbar becomes a symbol of the square and stays that way). From there on, I am unable to playback images in any scenario and requires a complete closure of the system to return to normal! The problem is apparently BOUNCING, with successful reading happening sometimes.

  Images of 29.97 was DVCPRO, I tried to transcode to Prores to solve problems. No dice. I think it's a problem related to the inability of the Decklink to manage several rate display on the fly, but wanted to present here, too. I also experienced delays intermittent sync on my monitor.

  DeckLink driver 10.0

  First CC 7.2.1

  Mac OSX 10.9.2 (mavericks before the same problem)

  Hi Andy,.

  You should not have problems with Blackmagic manage several formats on the fly. However, I believe that the problems of reading frozen that your description is related to the Desktop Driver video 10. I suggest rolling back to 9.3.3 for now. Blackmagic now turns on this issue.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• problem with multiple digital signatures by deactivating the fast web view

  Hello, I use acrobat pro 9.1 and have questions regarding a problem with several signatures on a pdf document.

  Why I ask the question below? My job is to prepare PDFs for submission to the FDA. The FDA requires, among other things, the documents submitted electronically have quick view active web.

  I am currently exploring ways to use digital signatures to sign pdf reports and always make sure they are spec FDA compliant. My question concerns a document which would have several signature fields. What I do, it is to create at least two signature fields in the doc and then save and optimize everything for fast web viewing. When I connect the first box and save, the file retains the fast web view state. Yet, when I apply and signatures past one, the file is then left for quick web display with no obvious way to turn it back on. I'm confused as to why it gets disabled after the second, and not just after even the first condition has been signed. And, of course, I would like to know if it is possible to maintain the fast web view and how to do it. I will gladly accept "tinker under the hood' suggestions file if they exist as well.

  Please let me know if something is not clear or you would like more information.

  Thanks for your time and your help.

  ~ Vlad
  

  Hi Vlad,

  Real Michael has got the right answer. A "Linearized" file (which is a file that has been optimized for fast Web view) aims to get the first page to display as soon as possible so that you can start playing without waiting for the rest of the file to download. Incidentally, the first designated page should not necessarily be page 0 (use of PDF has zero according to the pages counting system), but it usually is. The PDF specification, "the main objective of linearized PDF is optimized PDF documents viewing read-only. It is expected that the linearized PDF generated once and read many times. Incremental update is still permitted, but the PDF is is more linear and subsequently is treated as ordinary PDF. »

  When you open a PDF file the first time that the backup process is a full 'save', it is the whole document is rewritten, so there is no more than two percent markers EOF (end-of-file) inside. The first expressions of folklore means what page to see the first and the second EOF designates the end of the rest of the file (so the browser knows when to stop downloading). However, when you add a second signature (or even longer) the file is saved as a "record growth" and new data is appended to the original file. It is that you can do a restore to the previous signed version and allows Acrobat/Reader verify the integrity of each signature regardless of any other signatures. It's the incremental save, breaking the linear optimization of the file.

  Steve

• Canon 5 d Mkiii problem with multiple registration.

  Hello.

  I have a CF (32 MB sandisk extreme 60 MB/s) card and an SD card (sandisk 32 GB extreme pro 95 MB/s) inserted and in the menu under the Record func + map section I the func record. Rec. multiple value. My problem is that sometimes my video files are only copied to the SD card and not the CF card although the photo files are saved at the same time.

  Any help would be greatly appreciated.

  Canon 5 d Mkiii 50 mm f/1.4. EF 16-35mm f2.8L II USM.  EF 24-105mm f / 4L IS USM.

  EF 24-70mm f/2.8 L USM. EF 100 mm f/2.8 L Macro USM.  EF 70-200MM f/2.8 L IS USM

  Speedllite 430EX II

  I asked a videographer, a friend and he said...

  You can choose which films of map will be saved to, but there is no excess capacity or ability to mirror

  for movies with the 5 d Mk III.

• Problems with multiple locations

  I am having trouble wiring a table 2D plotting a graph of waveform information. According to everything I read in the documentation, this shouldn't be a problem, but it is. One thing I read said to activate the option 'Convert table' draw with a 2D array, but this option is grayed out in the menu. The strange thing is that there are other waveform graphs in the project who accept 2D data tables but I am unable to find a difference in the options between them. I have attached a few photos to see what I mean.

  Thanks for your help!

  I discovered the problem - the graph was not initially wired to a 2D array. I guess it maintains its initial entry 'type' for the duration of the program.

  Thanks for your time though.