Canon 5 d Mkiii problem with multiple registration.

Similar Questions

• Problems with the registration of the guarantee for my Satellite A200

  I tried to sign up for my Satellite A200 laptop computer online and it did not work. I then had to send info and proof of purchase for Toshiba and heard nothing yet.
  Emailed Toshiba and heard nothing yet. Number 117 of what laptop Toshiba receipt for support and services. It is what makes me look to buy a Toshiba.

  What service? What support? All I want to do is register my warranty. Is someone there?

  Hello

  I have 2 different Toshiba notebooks and I could save the guarantee of all my books!
  These two laptops are European model Toshiba and I could register the warranty on Toshiba's European support page!

  If you have any problems with your registration, then contact the ASP in your country and ask for help. If they have not responded until now then contact guys.

  I put t know what's wrong in your case, but my recording of security went well and it was not a problem!

  Then contact the guy and ask for help! It cannot be that difficult.

  Good bye

• Problem with multiple downloads with the router. Allows you to change the TCP MSS value?

  Original title: TCP MSS

  Hi all.

  I currently have a problem with multiple downloads with my current router.  If I have two current downloads at the same time I have no access to all web sites.  It's almost as if the downloads take my meaning of bandwidth there is more nothing for ordinary surfing.

  As a test I put an older router on my system and have a significant improvement in performance.  I have 2 downloads in progress and also surf at the same time.

  To compare two routers, I noticed that the only real difference between the two is that the TCP MSS value is set to '0' on the router of the problem, and then assign him 1392 (MTU - 40) on the router to elderly who gives better performance.

  It is my understanding that this value governs the size of transmitted packets.

  My question is this:

  What is the MSS value which is causing the problem?

  Congratulations in advance.

  Be sure to interpret the values. The '0' means no not literally because the link would not work. It is likely, that it allows the local device set limits for the link. Don't forget that there is a Maximum value and as such can be any value up to such limit as defined by all devices in the path.

  You can try capping manually but it is unlikely that any local limit will come to effect unless you set very low.

• Problems with multiple worksheets XY plotting (program generates repeated data)

  Hello

  I want to make a small program that will reduce the amount of time to go forward with the measurement data. I get data into .dat format, where all the files consist of frequency measurement with an X and a Y column. The problem is that I made 4 experiments (X column is the same for each experience) with 15 measures file each and more than 500 points of measurement in each file. I would like to make a simple manipulation and this copy that information to a file with same X column and multi-column, later I could use these data with Excel or origin (do it manually, it's frustrating and time consuming).

  At the beginning my program reads the background information with X and Y (b), and after I open the worksheet to insert the X and data of Y (n). (make a simple manipulation, like dividing Y (n) /Y (b), program show a graph of the current data and another graph multiple data, which are stored and must be exported in .txt, .dat or directly to Excel (which is more preferable)). I'm OK with the opening of several files of data, but which are not okay with copy/paste file and handle all that data manually, but that's my motivation for this program.

  The attached example can do all this (except for the entry in the file). He draws multiple charts on a XY chart using cluster and travel records. It is even possible to extract data in Excel, all that graphic, but the real problems comes with data are always added because of the loop. This gives a lot of empty and repeated data later. I'm jonesing to get rid of this. I have also attached several files of measure: 1 background and 3 measures.

  P.S. I tried to save time thanks to this program, but now, I spent more time than if I did it manually

  Your program absolutely no sense. What is the purpose of the structure of sequence? It just sits there, operating both in parallel to the while loop. Probably that you read from the local variables before other parts of the program had a chance to write valid data for them.

  In the while loop, you have a case of timeout that adds the same data over and over again, every 50ms. Why?

  Your mechanical actions "switch release" are misguided. Use actions to latch and remove structures deal as part of the event.

  Try to rethink the problem once the mode, and then solve the problem with 20% of your current code. See how far you get.

• Problems with multiple monitors for critical update Windows 7

  Since the update critical October 1, I can no longer run multiple monitors.

  According to the record, this update made changes at the same time the driver for my AMD Radeon 7470 and Dell monitor 1.1 card, and I've updated the software.

  Devices for work and when I pass cables or remove cables. Yet they are simply not recognized as connected.

  Hello Kent,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur because of corrupted or incorrect display settings.

  I suggest you run the hardware and devices Troubleshooter and check.
  Reference:
  Open the hardware and devices Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Please also read this article and check.
  Work and play better with multiple monitors
  http://Windows.Microsoft.com/en-us/Windows7/work-and-play-better-with-multiple-monitors

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Major problems with multiple items of page on the web viewer since the last update

  In the last days, we had problems with all our multiple page items that are newly updated or added on the web viewer.

  Scrolling of pages just to repeat content again and again and true articles page see first pages content overlaid on all subsequent pages. It seems that something important broke in the way that the dps push articles to the webviewer, as is happening through fact sheets and articles. This means that we cannot publish anything until it's resolved.

  Someone knows something similar? Any suggestions?

  Hi Lucie,.

  Please contact support for assistance with this enterprise. They can investigate and open a support issue with if necessary engineering team. Contact information is available by logging into http://digitalpublishing.acrobat.com/ and looking at the Middle bottom of the screen.

  Neil

• Problems with the registration of the creative cloud

  Hello

  I bought a full CC membership a month ago. I already had apps in trial period when I bought the membership.

  I had problems with registration for all applications, it said that I needed to register serial key.

  Now the trial period has expired, and I asked the support customer assistance.

  Customer support gave me a detailed response to delete some files host etc etc, but now when I try to open applications, it says that it is damaged or files are missing.

  I find it much too slow customer, and I already paid for a full month for members and still having the same problem.

  This creates a lot of problems for my work, and I really need this fixed ASAP number.

  Please help me solve this problem.

  Number of cases: 0186089063

  
  

  Thank you very much.

  
  

  Kristian
  

  Adobe - how to get Creative Cloud (CC) to work on Yosemite? -Stack overflow

  This solved my problem.

• Problem with multiple threads

  I have a program that interacts with an ESX 3.5 server using the VIX API, written in c#. I'm from multiple threads in c# program with each thread running an automation process which creates a connection to a virtual machine on the ESX Server, some automated process, and then disconnects. I'm having problems with this. When I call Disconnect() from one of the threads, it seems to cause problems with my other son if they have not yet disconnected. I connect to an another VM on the server in each thread. The problem is if I don't call disconnect, I get errors, but if I call disconnect in a thread it causes errors. Y at - it something similar? Any suggestions on how to make this run smoothly? Thank you!

  This sounds a lot like you are getting hurt by the host sharing of handle.  If HostConnect() is called with the same parameters, the handle of the host gets reused.  HostDisconnect() will clean this handle, even if his commune.  It's actually documented behaivior.  We have also decided that there may problems like the one you have reached, so it will be removed in a future release.

  So your application will share the handful of host among all discussions, and as soon as we call disconnection, the host handles in other countries also becomes invalid.

  Make a unique HostConnect() and share this handle inside threads is a way to avoid this.  HostConnect() is generally quite expensive, so we recommend in all cases.

• I bought an update of AVG security. He does not load because of a problem with your registration of chrome. ?????

  I buy another year of AVG security. It will not load due to a problem of "chrome registration" (pop-up). He told me to contact you. Please help I have alreay paid for it and I'm about to miss my old version. Thank you.

  User Agent

  Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.0; Trident/4.0; GTB6.4; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 1.1.4322; .NET CLR 3.5.30729;. OfficeLiveConnector.1.3; OfficeLivePatch.0.0; .NET CLR 3.0.30729; yie8; Creative ZENcast v2.00.13)

  Try launching Firefox as administrator once.

  Right-click on the Firefox icon and select Run as Administrator.

  See Chrome registration.

• Problem with the registration of a Microsoft Publisher Document

  I encountered a problem with save a Microsoft Publisher document in PDF format.  I built the file with color photographs and then recorded then I changed inside page photography photographs black and white and registered with the designation of BW in the title.  I have the file in two forms: one is full color, and the second is a combination of color and black and white.  When I save the file with the black and white photos inside as a PDF, it saves as color.  No matter what I do, they keep coming to the top of color.

  I spent more than an hour in a meeting with Microsoft Technical Support, and pointed towards Adobe as having the problem.

  The file with photographs n & B are sent to an external commercial printer.  We cannot do printing in full color, and when they print the color and b & w, they look terrible.

  So he comes to solve the problem with saving the file in PDF format.

  Can you help me?

  I thinI think that your problem was caused by an update. Not Adobe software, not Windows, but for the Publisher. Logical, since the Publisher deploys the file. Here is a discussion Community of Microsoft . Best of all, Microsoft have a new fix for this, apparently. Make sure you know how to check the version of Publisher you run and decide if you want the automatic updates to it.

• Problems with multiple framerates and Blackmagic Decklink 4 K Extreme reading

  Recently, I exchanged by AJA Kona card for extreme Blackmagic Decklink 4 K in order to get external followed in DaVinci Resolve.

  I work in a 1080 p 23.976 project that includes a 29.97 SD and HD images. Loading these images of 29.97 FPS in my layer source footage, I meet regularly with frozen reading (the triangle of game in my toolbar becomes a symbol of the square and stays that way). From there on, I am unable to playback images in any scenario and requires a complete closure of the system to return to normal! The problem is apparently BOUNCING, with successful reading happening sometimes.

  Images of 29.97 was DVCPRO, I tried to transcode to Prores to solve problems. No dice. I think it's a problem related to the inability of the Decklink to manage several rate display on the fly, but wanted to present here, too. I also experienced delays intermittent sync on my monitor.

  DeckLink driver 10.0

  First CC 7.2.1

  Mac OSX 10.9.2 (mavericks before the same problem)

  Hi Andy,.

  You should not have problems with Blackmagic manage several formats on the fly. However, I believe that the problems of reading frozen that your description is related to the Desktop Driver video 10. I suggest rolling back to 9.3.3 for now. Blackmagic now turns on this issue.

  Best,

  Peter Garaway

  Adobe

  Premiere Pro

• problem with multiple digital signatures by deactivating the fast web view

  Hello, I use acrobat pro 9.1 and have questions regarding a problem with several signatures on a pdf document.

  Why I ask the question below? My job is to prepare PDFs for submission to the FDA. The FDA requires, among other things, the documents submitted electronically have quick view active web.

  I am currently exploring ways to use digital signatures to sign pdf reports and always make sure they are spec FDA compliant. My question concerns a document which would have several signature fields. What I do, it is to create at least two signature fields in the doc and then save and optimize everything for fast web viewing. When I connect the first box and save, the file retains the fast web view state. Yet, when I apply and signatures past one, the file is then left for quick web display with no obvious way to turn it back on. I'm confused as to why it gets disabled after the second, and not just after even the first condition has been signed. And, of course, I would like to know if it is possible to maintain the fast web view and how to do it. I will gladly accept "tinker under the hood' suggestions file if they exist as well.

  Please let me know if something is not clear or you would like more information.

  Thanks for your time and your help.

  ~ Vlad
  

  Hi Vlad,

  Real Michael has got the right answer. A "Linearized" file (which is a file that has been optimized for fast Web view) aims to get the first page to display as soon as possible so that you can start playing without waiting for the rest of the file to download. Incidentally, the first designated page should not necessarily be page 0 (use of PDF has zero according to the pages counting system), but it usually is. The PDF specification, "the main objective of linearized PDF is optimized PDF documents viewing read-only. It is expected that the linearized PDF generated once and read many times. Incremental update is still permitted, but the PDF is is more linear and subsequently is treated as ordinary PDF. »

  When you open a PDF file the first time that the backup process is a full 'save', it is the whole document is rewritten, so there is no more than two percent markers EOF (end-of-file) inside. The first expressions of folklore means what page to see the first and the second EOF designates the end of the rest of the file (so the browser knows when to stop downloading). However, when you add a second signature (or even longer) the file is saved as a "record growth" and new data is appended to the original file. It is that you can do a restore to the previous signed version and allows Acrobat/Reader verify the integrity of each signature regardless of any other signatures. It's the incremental save, breaking the linear optimization of the file.

  Steve

• Problems with the registration of the CTM to CTSMan

  Hi all

  Is there a constraint of time return on registration of a CTMS to CTSMan.  We have 2 CTMS on Slough, United Kingdom and the other in Ohio, United States.  Our CTSMan is also in Slough.  The Ohio CTMS base seems to be okay at the beginning, but then the errors appear where CTSMan said Community trade marks could not authenticate.   The credentials are correct, so my suspicion is that CTSMan expects that there will be a recognition of the Ohio CTMS fast he is received (the round trip time is 109ms)

  What sounds right?  What is the recommended method to resolve this problem?

  Sincerely, Glen

  Hi Glen:

  If 109ms is RTT of the Ohio CTMS CTM in Slough, which should be good.  Finally, I checked the default deadline for registration was two seconds.

  In your CTS-Manager, you have your servers of CTM is entered with the IP address or host name?  CTS-Manager/CMTS is configured with specific DNS servers?  CTS-Manager/CTMS versions (I assume you're in 1.7 or 1.8 on both)?

  A more common cause of what you describe is lack of DNS. Make sure you have your DNS servers configured to solve for the CTM in Ohio, in addition to the MLC to Slough.  Periodic audits are are on the Community trade mark and of Community trade marks.  It is in Chapter 8 of our of CTS-Manager Install/Admin guide:

  http://www.Cisco.com/en/us/partner/docs/Telepresence/cts_manager/1_7/Admin/ctm_instalCTS_M.html

  You can issue "utils network host" from the CLI of the CTS Manager, and "utils network host the CLI of CTM to see if either fail to solve.»

  "Configuration of DNS for before name resolution is required for CTS-Manager and all servers configured in the CTS Manager.  All server names can be resolved by the DNS of CTS-Manager and CTS-Manager server name can be resolved by DNS to all other servers. »

  Also, make sure that the appropriate ports are open between the CTMs and CTM (if the servers are secure and it is a new installation, I would definitely check this). Here is the list of ports:

  http://www.Cisco.com/en/us/partner/docs/Telepresence/security_solutions/ctss_app_a.html

  If neither of the above seem to be the issue, then a TAC case may be a good idea, so we can take a look.

  HTH-

  Tina

• OfficeJet Pro 6830: Problem with multiple Pages into one file

  I just bought an OfficeJet Pro 6830 problem and have the scanning of several pages in a PDF document.

  I checked and the box advanced settings/file/create a separate file for each page is disabled, but it will not always combine pages.  Registration prompt window upward after finishing first scan.

  Previously I use Desktop 4580 without any problems and the file to automatically create the folder of the current month in Myscan and analysis enable the scan file be save.  It seems that this function was also missing.

  Please advise.  Thank you.

  Hello

  Scan you from the glass flat or the top of the charger page?

  If you use the charger to top of the page, the pages must be taken and analyzed before the scan to finish.

  If you use glass, ensure that the box show the display after scanning is enabled and press scan, click on the button "+" under the preview of scanning to scan the next prior pages by clicking Save.

• Problems with multiple locations

  I am having trouble wiring a table 2D plotting a graph of waveform information. According to everything I read in the documentation, this shouldn't be a problem, but it is. One thing I read said to activate the option 'Convert table' draw with a 2D array, but this option is grayed out in the menu. The strange thing is that there are other waveform graphs in the project who accept 2D data tables but I am unable to find a difference in the options between them. I have attached a few photos to see what I mean.

  Thanks for your help!

  I discovered the problem - the graph was not initially wired to a 2D array. I guess it maintains its initial entry 'type' for the duration of the program.

  Thanks for your time though.