Problem with OTG USB Flash Drive - Lenovo a7000

Similar Questions

• Problem with 2 USB flash drive in Windows XP sp3.

  I have a USB 2 pci card - USB 2 card, with the hub 7 ports (powered) USB. Sometimes, everything works fine. Most of the time I can't access flash USB dirve. Printer, scanner, camera, photo, mouse, all connected work very well. Plug the flash drive and errors occur. The flash player works fine in laptop (Win xp sp3). Difference between the two machines, the laptop has only 2 USB ports. Have tried to uninstall the USB controllers and re-setup. Flash drive works fine in the desktop integrated USB 1.1. Have checked with Kingston USB drive flash technical support without success.

  When dirve flash does not, Device Manager displays the flash player at the top of the page section of controllers USB bus, as well as generic USB (USB 2?) hub. When the flash works do not drive, hub Generic USB appears in the second USB bus controllers.
  Someone help? Please, I beg you.

  Hello

  Tried your suggestions, without success.

  Have now connected powered hub USB 2 on my edge USB 1.1, with all devices USB works fine.

  Probability of problems seems to be my pci - USB 2 card.

  Being disabled, it is very convenient for me to have the hub USB 2 powered on my work surface to facilitate the connection of my devices.

  Thanks for your help anyway.

• Problem with my usb flash drive

  

  Any help for these?

  Thnx...

  Hello Christiane,.

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that, while creating a bootable flash drivers you are facing difficulties in the choice of the disk partition on your Windows 7. I will definitely help you to solve this problem.

  I suggest you remove the drive letter using disk management and assign a different drive for the drive letter and check if this may help solve you the problem and if the drive works fine.

  To change the drive letter in disk management follow the steps below:

  1. open computer management by clicking the Start> Control Panel > system and security>Administrative Tools>computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the left pane, click on Disk Management.

  3. click on the drive that you want to change and then click change drive letter and paths.

  4. do one of the following:

  • For letter an if it has not already received, click Add, click the letter you want to use and then click OK.
  • To change a drive letter, click change, click assign the following drive letter, click the letter you want to use, and then click OK.
  • To remove a drive letter, click Remove, and then click Yes to confirm that you want to remove.

  Additional information:

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows/change-add-remove-drive-letter#1TC=Windows-7

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• How to recover from the failure of a with ESXi USB flash drive?

  I have ESXi 5.5 running on a 16 GB USB flash drive.  The system itself has a RAID card and drives mirrored where all virtual machines are stored, so it seems to me that a critical point of weakness is the drive itself.  If die ESXi itself running flash player, is there a procedure to recover the virtual machines on the disks?  Or should I keep a backup of my drive as well?

  1. How to restore the operating system assuming that the flash drive fails? If I reinstalled ESXi on a new drive of the same thumb, would see the VMware VMs existing on the hard drives of the server? Or is the process of discovery of the relatively painless existing virtual machines?

  If your flash drive goes down, will not be a problem that you have your virtual machines without danger on the separate data store in the locally attached storage drives. all you got to do is to reinstall ESXi host, he will be happy to see the existing VMFS data store and browse this data store where are stored the re-save you and virtual machines in the inventory.

  See also changes following KB to make the backup of your ESXi as operating system configuration and when you change the configuration at the time of the failure of ESXi, you don't have to worry about re-configuarting it

  VMware KB: Backup and restore configuration using the vSphere command-line Interface and vSphere PowerCLI ESXi

  1. How can I maintain redundancy for my USB failure? Can I have two drives connected and automatically backup flash / mirror the first hard drive to the second?

  This is not possible (I never tried myself) If you use an external flash drive, but let's say that you have any material to the specific provider giving this feature as

  DELL IDSDM http://www.dell.com/downloads/global/products/pedge/en/poweredge-idsdm-whitepaper-en.pdf

  or another supplier giving a similar feature, then it is quite possible to mirror. Otherwise, the best option is take config. backup using KB, I mentioned in the first answer.

• Problem with opening the flash drive

  I can't open any Flash drive. I try to install the latest version they wil not open, even with the plugin and activex. What should do? While trying to fix it, I uninstalled all the flash player aswel and activex plug-in. How to fix this?

  To help out we will need the following system information:

  • Operating system
  • Browser
  • Version of Flash Player

  When troubleshooting problems with Internet Explorer, we recommend that go you through the steps described in these two FAQS:

  • Allowing Flash Player in Internet Explorer
  • ActiveX filtering in Internet Explorer

  Thank you

  Chris

• I can't get a connection with my USB flash drives or portable hard drives under windows 7. It detects only the presence of usb devices, but usually gives me access to a drive letter for it.

  When connecting usb data as a flash drive or an external hard drive the device drives shows its presence in the clock system but custom windows status bar 7 give a drive letter to access the drive. Stuart Bennett

  Right-click on my computer and select manage.  On the next screen, click on disk management.  Now appear on the right side of the screen?  If yes you can assign a drive letter to them here.

• Satellite Z930 - suspend the problem with connected USB hard drive

  Hello

  Owner of a newly acquired Satellite Z930-15 X, I have a few questions/problems:

  1) suspends the work of RAM and good hibernation when there is no external hard drive connected. If there is one is connected, the laptop immediately returns back to suspend state. Is there a solution for this?

  (2) is there a way to selectively disable Bluetooth? Currently, only toggle airplane mode is available (with Fn + F8 or Windows 8 charm bar). This activates / deactivates the Wi - Fi or Bluetooth I think.

  (3) the portable computer is wobbly on reception. I put a bit of thin paper at the corner of a bottom (bottom left) so that it can be stabilized. Apparently, the problem is also mentioned in another thread. Is there a suggestion to fhix this problem?

  Thank you.

  1 / what HARD drive is connected to your laptop? When I use the external 2.5 HARD drive with my Satellite U940 I n t have problem.

  2 / I ve tested it on my machine and I noticed the same thing. When WIFI is disabled software BT is off too. I didn t find a way how to separately control adapter WLAN and BT.

  3 / I think that this issue needs to be clarified with Toshiba service. They must check and perhaps exchange rubbers inside.

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• installed windows xp with a usb flash drive and it says plugin.ocx is missing

  recently, I tried to re - install windows xp to format my hard drive and evrything was going well until he says plugin.ocx was missing. now I can't complete installation and my computer is absolutely useless. I used a program called wintoflash to make a USB bootable cd-rom image. to my knowledge wintoflash uses your existing windows installation to do this. I tried to download plugin.ocx and place on the drive hard usb, then the installation says that's not a valid windows image... Please help!

  so bad I has not successfully copied the disc of windows through wintoflash

• All deleted files from the USB Flash drive!

  I have windows XP Professional on my computer and these days I have a problem with my USB flash drive (CCPC USB flash disk USB Device. I have a very important document that is stored in it and when I plug it into my computer it shows no content of the flash player automatically (as it was).

  When I click on the peripheral E: removable where is the flash drive, I get the message that the disc is not fomratted, would you like to see it format it now? I say no, and nothing happens. When I say yes, he says he must delete all files in the USB drive, but I don't want them should be deleted. What has caused this and what can do to save my documents are deleted?

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• Compatibility with Windows 7 ultimate (64 bit) USB Flash drive

  Are there compatibility issues in the Ultimate version with including USB flash drives?  I have no problems of this nature with the Home Premium version.  Is anyone able to offer some advice?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand from the description of the issue that you are facing a problem with the USB on Windows 7 Ultimate flash drive.

  I appreciate if you could answer a few questions.

  1. What is the model of your computer?

  2. the problem occurs for all flash drives?

  3. you receive error messages or codes?

  I suggest you follow the link below where Nithyananda J provided as follows for this problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/my-USB-flash-drive-doesn

  You can also see this Microsoft article below will help you solve the problem with USB devices.

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  If the problem persists then you can try also to download the latest drivers from the Chipset of your computer.

  Let us know the status of the issue.

• Presario v3000 think usb flash drive is a CD-ROM/dvd-rom; recognizes any CD

  Presario v3000 running XP PRO sp3

  Hello

  My CD-ROM/DVD-ROM drive disappeared from the Manager of devices and Windows Explorer about 2 weeks; I tried all the fixes the base of knowledge without result. When I put a CD in I can hear it running, but nothing happens, even when Windows says it's looking for a CD.

  However, when I put a Flash drive on a port USB, "reader of CD/DVD-ROM" appears in the device, Manager who think that Flash is a CD-ROM/DVD-ROM called drive'Sandisk U3 cruzer Micro USB device'.  Dev man lists the Flash exactly in the same way under ""hard drives "; " under "Bus USB controllers ' it is listed as'USB mass storage device'.

  Even with the USB flash drive, "'my computer ' still does not show aCD-ROM/DVD-ROM drive, but it puts a CD icon next to "U3 system", which he calls"(e) ". "

  Here's what looks like 'My Computer' in Windows Explorer:

  (drive icon)   + Local Disk (C:)

  (drive icon)  + HP_RECOVERY (:)) d )

  (cd icon) System U3 (e :)) )

  (drive icon)  + PKBACK #001 (f)

  I am so very confused and mentally exhausted.  Can someone please help me straighten this mess?

  Thank you...

  Liliane

  PS my BIOS says for what it's worth, that my OS is Vista, when in fact it is XP PRO!

  Try this:

  1. click on start

  2. click on run

  3. type in diskmgmt.msc

  4. in the lower pane, scroll down until you see your device

  5. right click, choose paths and change the drive letter

  6. click on edit

  7. change if necessary

  Hope this helps

  Restart the computer and check to see if the same thing happens.

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I plug the USB FLASH drive into the PC it does not appear in the computer

  I have a USB Flash driver: Team Fusion more 4 GB

  Like this one:
  
  Same color and this one exactly.
  and when I put inside my computer I hear the BLOOP sound when I insert it and also when I go out, I hear a noise... but when I go to my computer it does not appear...
  It worked before, I inserted my USB Flash driver inside my computer... then when I right click on a file inside driver flash my computer got stuck and I force restarted my PC with exit it restarts normally and after that it doesn't work any more I just hear sounds when I insert the USB key inside and outside.
  I tried things.
  -Troubleshooting and it didn't help me at all... He didn't show me something when he finished it.
  -Tried restarting the computer and access bios and active in the advanced settings in the number 3 to USB - ZIP
  -J' inserted behind my computer and also in front of the computer USB flash driver.
  -Computer all analysed in depth scan with Advanced System Care Pro 5.4 and did not help even after a reboot.
  -Tried to reinstall the driver for the "Device Manager" USB flash drive
  -IMPORTANT! I tried to plug this USB on another computer and it arises there, but could not access the USB key, I tried to format and it says error and he said that he could not format... I tried to format it in NTFS, fat32, with formats fast and quick, but nothing has worked.
  SO the problem is with the USB FLASH DRIVE! not the computer...
  Help me please :| What should I do?
  Image when my USB driver is inside my computer:
  Open the image in a new tab to see full size image.
  Picture that shows that I reinstalled the driver for my USB Flash drive:
  

  Yes man, he is in disk management. I tried to do a right click on it and clicked on «letter of change of driver and paths...» "and it came up with error... Look man, I fixed that by myself... the flash disk is cool now xD you know what I did? I just went to my dad's pc... I tried to get the DRIVER USB FLASH, but he came up with the error and asked if I want to format it... I clicked format and it didn't work... I tried NTFS, FAT32, format not quick and fast and nothing worked... it was still * place... so what I did? I downloaded "HP USB Disk Storage Format Tool 2.2.3" of http://www.softpedia.com/get/System/Hard-Disk-Utils/HP-USB-Disk-Storage-Format-Tool.shtml here and then I formatted it with success! and then the flash driver disk worked on my dad's computer but when I tried to connect it to my pc, it does not appear lol but it worked on other computers, so it's cool: P I just going to format my PC: P it works now with the USB HP program disk formatting tool. only does not not on my pc, but it's ok... I formate my pc. :)

• Why does movement of files on a USB flash drive last so long?

  I don't know if this is a Windows problem, but when I move a lot of files/folders (no copy, but select, then drag, or cut and paste) a place on the USB to another place on the flash drive, it takes much longer than the same hard disk.

  What is a Windows problem or a problem of flash player?

  If Windows is somehow move the files into pieces on the hard drive, then moving them back to the flash drive, I could see that as being the reason, but this seems very inefficient. If Windows says just the flash drive to move files and it does itself, I wonder if it is an inefficiency in the flash drive (or formatting) or just the nature of how flash drives move some files.

  I don't know that you have understood my problem. I moved the files to the flash drive from one folder to another on the flash drive. When I move tons of files in a folder on the Windows Installer by car, no matter where the records are or the number of files/folders are moved, it usually happens instantly and occasionally perhaps takes a fraction of a second or two; I know it's simply by changing the index (do not physically move the files). With a USB flash drive, it takes seconds to minutes, depending on how much is moved, which is usually much less to install on the windows drive. It's because flash player must physically move the files on the disk, there is no index to put it as on a fixed drive.  In addition the only way to move is to copy in memory, and then write it to the new location.  This means that each overflow bit must go through the USB connection (which is thousands of times slower than SATA cable on the real hard disk), and since then he has to go twice (in and out), it is even half as slow as new.

  There is no transfer between the hard drive and the flash player I know.

  What this means for me, it is the index or take more time to rewrite, or files are actually moved. What I'm asking is if Windows is somehow data transfer (even if it's the index) drive flash disk, then moving them backwards, slowing things down. I think that even moving them by RAM would slow it down, but I'm not sure.  Also considers that the internal drive is cached. So even if a bit should be moved, Windows will just notice "Yes move this bit later."  The progress box says it completed instantly, but really uses lazy writeback just finish the job later.  That is why if you lose power to your computer, it corrupts the files got reported as fact, but were not actually written on the disc.  Flash drives do not use the lazy "write behind caching" because they never know when the user will disconnect unexpectedly, so that they take the slow lane and check writing all ended before they say the progress bar to advanced. 

  You can change this second element by setting your USB device to "best performance" in the device, as Manager below.  But I do not recommend because it cannot handle unplug you the reader more.