Problem with 2 USB flash drive in Windows XP sp3.

Similar Questions

• Problem with OTG USB Flash Drive - Lenovo a7000

  Hello
  I recently baught a Lenovo A7000 and it's great. I've set my default storage in the form of SD card and many applications are installed on the same, but the problem I am facing is when I connect to the USB OTG flash drive (it works fine). When I take it apart all the applications on my SD card are not visible on the home screen. However, girls are on the only sd card, but the just icons are not displayed. Whenever I connect OTG all apps are visible again after removing the OTG same problem each time.
  Please help me solve this problem. I want my apps to install to sd card, but not on the drive Flash OTG.
  What should I do? Thanks in advance

  Well, the problem is solved only when restart us the machine, but it's still
  not convenient to reboot each time that you insert an OTG. He really needs a
  Difficulty again.

• Problem with my usb flash drive

  

  Any help for these?

  Thnx...

  Hello Christiane,.

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that, while creating a bootable flash drivers you are facing difficulties in the choice of the disk partition on your Windows 7. I will definitely help you to solve this problem.

  I suggest you remove the drive letter using disk management and assign a different drive for the drive letter and check if this may help solve you the problem and if the drive works fine.

  To change the drive letter in disk management follow the steps below:

  1. open computer management by clicking the Start> Control Panel > system and security>Administrative Tools>computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the left pane, click on Disk Management.

  3. click on the drive that you want to change and then click change drive letter and paths.

  4. do one of the following:

  • For letter an if it has not already received, click Add, click the letter you want to use and then click OK.
  • To change a drive letter, click change, click assign the following drive letter, click the letter you want to use, and then click OK.
  • To remove a drive letter, click Remove, and then click Yes to confirm that you want to remove.

  Additional information:

  Change, add, or remove a drive letter

  http://Windows.Microsoft.com/en-us/Windows/change-add-remove-drive-letter#1TC=Windows-7

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3

  How to replace a bad IDE disk with a USB Flash drive system - and have all the functionality of XP Pro SP3
  Given a PC without hard disk...
  How can you use a flash drive instead?
  So, indeed, the USB key works as an SSD...
  I saw online options that gives partial functionality of the system... and an option that is more than $100 (more than the system's worth)...
  None of these options are acceptable in the circumstances.
  It is an effort to create a machine for a particular use, built from a recycled pc for which hard drive was removed and destroyed by the original owner...
  The criterion is that it must work just like it was a mechanical drive running xp pro sp3 with all updates, etc...
  Thanks for any help.

  You can not install XP on a Flash as his unsupported drive. Your only two options are a traditional hard drive or Solid State Drive (SSD).

  J W Stuart: http://www.pagestart.com

• How to install Windows XP using USB Flash Drive in Windows 7?

  I m windows 7 and want to install windows xp, how to install windows xp using a usb flash drive. I have the iso file from xp.

  Hello

  The Microsoft Windows 7 USB/DVD download tool is designed for the installation of Windows 7, is not for the installation of XP.

  I suggest that you use Google that Microsoft does not support what you want to do.

  http://www.computerhope.com/issues/ch001366.htm

  ______________________________________________

  As you have the ISO file, make a record with him:

  https://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

  See you soon.

• How to recover from the failure of a with ESXi USB flash drive?

  I have ESXi 5.5 running on a 16 GB USB flash drive.  The system itself has a RAID card and drives mirrored where all virtual machines are stored, so it seems to me that a critical point of weakness is the drive itself.  If die ESXi itself running flash player, is there a procedure to recover the virtual machines on the disks?  Or should I keep a backup of my drive as well?

  1. How to restore the operating system assuming that the flash drive fails? If I reinstalled ESXi on a new drive of the same thumb, would see the VMware VMs existing on the hard drives of the server? Or is the process of discovery of the relatively painless existing virtual machines?

  If your flash drive goes down, will not be a problem that you have your virtual machines without danger on the separate data store in the locally attached storage drives. all you got to do is to reinstall ESXi host, he will be happy to see the existing VMFS data store and browse this data store where are stored the re-save you and virtual machines in the inventory.

  See also changes following KB to make the backup of your ESXi as operating system configuration and when you change the configuration at the time of the failure of ESXi, you don't have to worry about re-configuarting it

  VMware KB: Backup and restore configuration using the vSphere command-line Interface and vSphere PowerCLI ESXi

  1. How can I maintain redundancy for my USB failure? Can I have two drives connected and automatically backup flash / mirror the first hard drive to the second?

  This is not possible (I never tried myself) If you use an external flash drive, but let's say that you have any material to the specific provider giving this feature as

  DELL IDSDM http://www.dell.com/downloads/global/products/pedge/en/poweredge-idsdm-whitepaper-en.pdf

  or another supplier giving a similar feature, then it is quite possible to mirror. Otherwise, the best option is take config. backup using KB, I mentioned in the first answer.

• I can't get a connection with my USB flash drives or portable hard drives under windows 7. It detects only the presence of usb devices, but usually gives me access to a drive letter for it.

  When connecting usb data as a flash drive or an external hard drive the device drives shows its presence in the clock system but custom windows status bar 7 give a drive letter to access the drive. Stuart Bennett

  Right-click on my computer and select manage.  On the next screen, click on disk management.  Now appear on the right side of the screen?  If yes you can assign a drive letter to them here.

• Problem opening of my flash drive in windows 7

  Hello everyone! I plugged a dive flash to my computer and then my antivirus (Bitdefender) says it has virus (horse of Trojan and malware) and told me that they should be deleted and after the scan is complete, whenever I try to open my drive (USB) flash, I see a shortcut (size of 1 KB) and when I try to open it shows this message (there was a problem starting pvd3z8... (a lot of weird things)-the specified module could not be found. :(:(veuillez s'il vous plaît aider.)

  Hello!

  I suggest you to format the flash drive using HP Format reader tool.

  Most likely your USB has on him a virus that starts with AutoRun, so you're very very likely to infect your computer, if you perform the following steps to manually remove the virus from the key.

  I had a case on a PC with a virus VBS (Visual Basic Script) who himself reinstalled in the computer every time a letter assigned to the USB and every time you have double-clicked on USB key in 'computer '.

  To manually remove the virus from the stick:

  1. go in disk management and assign a letter on the pendrive

  Start--> Diskmgmt.msc; in management of drives, right click on the USB drive and select 'Change drive letter and paths', click 'Add', assign the following drive letter... Ok

  2. open administrator command prompt

  Start-> Accessories-> right-click "Command Prompt" and select "Run as Administrator"

  3. navigate to the USB, identify the strange hidden files and delete them

  CD d:\ (if d: is the letter of the USB drive)

  Dir /ah-> for show hidden files

  attrib - a-s-h - r-> to view the files

  del autorun.inf

  del file1

  del File2

  where File1, File2 is the names of suspicious files which are hidden files before. You can use the TAB key after led to select files easier.

  4 remove the USB

• Problem with opening the flash drive

  I can't open any Flash drive. I try to install the latest version they wil not open, even with the plugin and activex. What should do? While trying to fix it, I uninstalled all the flash player aswel and activex plug-in. How to fix this?

  To help out we will need the following system information:

  • Operating system
  • Browser
  • Version of Flash Player

  When troubleshooting problems with Internet Explorer, we recommend that go you through the steps described in these two FAQS:

  • Allowing Flash Player in Internet Explorer
  • ActiveX filtering in Internet Explorer

  Thank you

  Chris

• Driver problem with prolific USB-to-Serial and Windows 7 connector

  I'm trying to connect a UPS to PowerPanel to my new ACER computer with 64-bit Windows 7 via a prolific USB-serial connector software. The convenience store says he has a driver problem the convenience store is unable to correct. However, messages also said that my driver is up to date and the device working properly. I have installed, uninstalled and tried to fix several different drivers, run the troubleshooter, etc.. I tried to run the stand-alone Windows Installer, but it says "not compatible with your computer." Help! Is there anything else I can try?

  Hi Mary,

  Until solve us the problem we need more information on the issue.

  ·        What is the exact error message that you receive when you connect theprolific USB-serial connector to your computer?

  ·         Could you plug the connector on the computer as soon as possible without any problem?

  ·         What is the model number of the connector?

  ·         The ups and the computer manufacturer and what is the model number?

  ·         Who is the stand-alone Windows Installer you tried to install?

   

   

  You can first check if the USB connector to prolific series model if its compatible with windows 7 Access the link below to check the compatibility with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  You can also contact themanufacturer prolific USB-serial connector and check if the device is compatible with Windows 7 and if you need to install any other drivers to get the device to work.

   

   

  Post back with the required information.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• installed windows xp with a usb flash drive and it says plugin.ocx is missing

  recently, I tried to re - install windows xp to format my hard drive and evrything was going well until he says plugin.ocx was missing. now I can't complete installation and my computer is absolutely useless. I used a program called wintoflash to make a USB bootable cd-rom image. to my knowledge wintoflash uses your existing windows installation to do this. I tried to download plugin.ocx and place on the drive hard usb, then the installation says that's not a valid windows image... Please help!

  so bad I has not successfully copied the disc of windows through wintoflash

• Satellite Z930 - suspend the problem with connected USB hard drive

  Hello

  Owner of a newly acquired Satellite Z930-15 X, I have a few questions/problems:

  1) suspends the work of RAM and good hibernation when there is no external hard drive connected. If there is one is connected, the laptop immediately returns back to suspend state. Is there a solution for this?

  (2) is there a way to selectively disable Bluetooth? Currently, only toggle airplane mode is available (with Fn + F8 or Windows 8 charm bar). This activates / deactivates the Wi - Fi or Bluetooth I think.

  (3) the portable computer is wobbly on reception. I put a bit of thin paper at the corner of a bottom (bottom left) so that it can be stabilized. Apparently, the problem is also mentioned in another thread. Is there a suggestion to fhix this problem?

  Thank you.

  1 / what HARD drive is connected to your laptop? When I use the external 2.5 HARD drive with my Satellite U940 I n t have problem.

  2 / I ve tested it on my machine and I noticed the same thing. When WIFI is disabled software BT is off too. I didn t find a way how to separately control adapter WLAN and BT.

  3 / I think that this issue needs to be clarified with Toshiba service. They must check and perhaps exchange rubbers inside.

• "Unknown device" USB Barcode scanner, problem with the USB controller driver?

  Hello

  I need assistance with our Barcode Scanners that doesn't work on our newly purchased computers at HP with Windows7 Pro x 64 operating systems.

  The brand and model of the bar code scanner is:

  Datalogic Heron D130 USB.

  When you connect the scanner to a USB port, Windows will try to install this as a HID, but it takes an unusually long time, about 7-8 seconds, to boot the device and install the drivers and appears as an unknown device in windows "devices and printers" and the hand scanner does not work.

  Sometimes when you move the USB back can I sometimes the scanner at hand to be recognized as an HID device or a Datalogic barcode scanner,

  It works fine until you restart the computer.

  After restart the computer cannot detect the scanner Barcode correctly without re - appears as unknown device.

  I suspect that there is a compatibility problem between barcode scanner and card USB controller on the computers.

  I tried to update all the drivers available on the website www.hp.com and same www.Intel.com (chipset drivers) but nothing has helped to solve this problem

  Tried newly bought barcode scanners and "used" barcode scanners earlier who works on other computers, but the problem remains.

  I found a workaround by connection of bar codes in a USB hub, and then plug the USB hub to the computer.  And leave the USB - hub to take care of the communication with the Barcode Scanner.

  in this case, it takes about 2 seconds for the code scanner barcode to mount correctly in windows under the heading "devices and printers" and then works perfectly, even after a reboot.

  I googled after a response after my problem, but it seems I'm the only one who experience this issue. ?!

  Bought more than 40 computers that I have this problem.

  These were bought at different times with two different for suppliers

  Computer model are the following

  HP ProDesk 1 400 P/N5S21EA

  Specifikations:

  http://WWW8.HP.com/emea_africa/en/products/desktops/product-detail.html?OID=6614160#! tab = specifications

  Does anyone have an idea what could be wrong and how to fix it?

  Thanks in advance

  Sincerely

  Robert T

  Hello

  The problem is not power - related.

  We use passive USB hubs that solves the problemon these computers.

  (it also works with the docks, or if you EliteDisplay E241 HP as we thers a usb hub 2 ports inbulit in monitor that works.)

  The problem lies in the incompatibility between the Intel USB controller and the hand scanner, can be connected to USB 3.0

  When you let another usb-controller support in handshakeing (such as a usb hub), it works.

  Datalogic or Intel would like to acknowledge this error.

  Because none of the big companies want to acknowledge the problem or repair, personally chose to switch to an AMD platform / CPU instead of the Intel and now it works fine!

  We get more performance for your money when AMD is usually less expensive to purchase.

  And because of the poor of Datalogic press where they don't even answer e-mail (their only channel for support)

  I chose to stop using their products. I'm going to use another provider / brand of barcodescanners.

• Problem with actionscript in Flash CS3 IDE window

  The actionscript window opens not upward for all frames on the timeline. When I press "F9" or try to access it via the context menu of the action of the window tab appears at the top in reduced form. No matter how many times I click above or the button larger, that the window does not open. I tried to reinstall Flash CS3, but it did not help.
  Any help with this issue is appreciated.
  Thank you!

  Found a solution for this atlast! Remove the Users/AppData folder for flash CS3 and things will be back to normal. Somewhere, it seems the screws of the IDE Flash and save settings for local users. These parameters of compensation restored my window of action!

• All deleted files from the USB Flash drive!

  I have windows XP Professional on my computer and these days I have a problem with my USB flash drive (CCPC USB flash disk USB Device. I have a very important document that is stored in it and when I plug it into my computer it shows no content of the flash player automatically (as it was).

  When I click on the peripheral E: removable where is the flash drive, I get the message that the disc is not fomratted, would you like to see it format it now? I say no, and nothing happens. When I say yes, he says he must delete all files in the USB drive, but I don't want them should be deleted. What has caused this and what can do to save my documents are deleted?

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner