Problem with ping the client Host.

Similar Questions

• Problem with ping VPN cisco 877

  Hi all!

  I have a working VPN between a fortigate and a Cisco.

  I have a problem with ping network behind the cisco of the network behind the forti.

  When I ping to vlan2 cisco without problem (192.168.252.1) interface, but I can't ping a server in the vlan2 (192.168.252.2) behind the cisco.

  However the Cisco I can ping the server. In the forti, I see that ping to the interface vlan2 and server in vlan2 take in the same way, and I can see package.

  I post my config could see it it as blocking the ping from 10.41.2.36 to 192.168.252.2 while 192.168.252.1 ping is OK?

  IPSEC #show run
  Building configuration...

  Current configuration: 3302 bytes
  !
  ! Last modification of the configuration at 14:42:17 CEDT Friday, June 25, 2010
  ! NVRAM config update at 14:42:23 CEDT Friday, June 25, 2010
  !
  version 12.4
  no service button
  horodateurs service debug datetime msec
  Log service timestamps datetime localtime show-time zone
  encryption password service
  !
  IPSEC host name
  !
  boot-start-marker
  boot-end-marker
  !
  logging buffered 1000000
  enable secret 5 abdellah
  !
  No aaa new-model
  clock timezone GMT 1
  clock to summer time CEDT recurring last Sun Mar 02:00 last Sun Oct 03:00
  !
  !
  dot11 syslog
  IP cef
  No dhcp use connected vrf ip
  DHCP excluded-address IP 192.168.254.0 192.168.254.99
  DHCP excluded-address IP 192.168.254.128 192.168.254.255
  !
  IP dhcp DHCP pool
  network 192.168.254.0 255.255.255.0
  router by default - 192.168.254.254
  Server DNS A.A.A.A B.B.B.B
  !
  !
  no ip domain search
  name of the IP-server A.A.A.A
  name of the IP-server B.B.B.B
  !
  !
  !
  !
  !
  crypto ISAKMP policy 1
  BA aes 256
  preshared authentication
  Group 5
  ISAKMP crypto key ciscokey address IP_forti
  !
  !
  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac vpntest
  !
  myvpn 10 ipsec-isakmp crypto map
  defined by peer IP_forti
  Set transform-set vpntest
  match address 101
  !
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  interface Tunnel0
  IP 2.2.2.1 255.255.255.252
  source of Dialer0 tunnel
  destination of IP_forti tunnel
  myvpn card crypto
  !
  ATM0 interface
  bandwidth 320
  no ip address
  load-interval 30
  No atm ilmi-keepalive
  DSL-automatic operation mode
  !
  point-to-point interface ATM0.1
  MTU 1492
  bandwidth 160
  PVC 8/35
  VBR - nrt 160 160
  PPPoE-client dial-pool-number 1
  !
  !
  interface FastEthernet0
  switchport access vlan 2
  !
  interface FastEthernet1
  !
  interface FastEthernet2
  !
  interface FastEthernet3
  switchport access vlan 2
  !
  interface Vlan1
  IP 192.168.20.253 255.255.255.0
  IP nat inside
  no ip virtual-reassembly
  !
  interface Vlan2
  IP 192.168.252.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  interface Dialer0
  bandwidth 128
  the negotiated IP address
  NAT outside IP
  no ip virtual-reassembly
  encapsulation ppp
  load-interval 30
  Dialer pool 1
  Dialer-Group 1
  KeepAlive 1 2
  Authentication callin PPP chap Protocol
  PPP chap hostname [email protected] / * /
  PPP chap password 7 abdelkrim
  myvpn card crypto
  !
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 Dialer0
  IP route 10.41.2.32 Tunnel0 255.255.255.240
  !
  no ip address of the http server
  no ip http secure server
  The dns server IP
  translation of nat IP tcp-timeout 5400
  no ip nat service sip 5060 udp port
  overload of IP nat inside source list NAT interface Dialer0
  !
  IP access-list standard BROADCAST
  permit of 0.0.0.0
  deny all
  !
  NAT extended IP access list
  IP enable any host IP_cisco
  deny ip 192.168.252.0 0.0.0.255 10.41.2.32 0.0.0.31
  !
  access-list 101 permit ip 192.168.252.0 0.0.0.255 10.41.2.32 0.0.0.31
  public RO SNMP-server community
  3 RW 99 SNMP-server community
  SNMP-server community a RO
  SNMP-Server RO community oneCommunityRead
  not run cdp
  !
  !
  !
  control plan
  !
  !
  Line con 0
  password 7 abdelkrim
  opening of session
  no activation of the modem
  line to 0
  line vty 0 4
  password 7 aaaaa
  opening of session
  escape character 5
  !
  max-task-time 5000 Planner
  NTP-period clock 17175037
  Server NTP B.B.B.B
  Server NTP A.A.A.A

  end

  Alex,

  It's your GRE tunnel:

  interface Tunnel0
  IP 2.2.2.1 255.255.255.252
  source of Dialer0 tunnel
  destination of IP_forti tunnel
  myvpn card crypto

  You also have routing set by it.

  You don't need a GRE tunnel, nor do you need the road to tunnel if you want just IPsec tunnel.

• Problem with ping

  I have this weird problem with ping and I think it's related to virtual switching equipment.

  I'll try to explain it as simple as possible.

  This specific (10.2.0.154), I can not ping ip address of all my customers who are running on the same host.

  In fact, I can't ping the IP address of the host itself.

  As far as I know that I have no problem to reach this IP address from any other machine. I tested at least 10 other machines, and among them were a few virtual servers.

  Everything is on the same network 10.2.x.x/16 no routing, filtering of packets, vlanning, or everything that is done.

  On the host: It's a HP proliant DL360G5 running vmware server 1.05 on windows 2003. It uses its two internal nic teamwork mode (link 2GB) to connect to a pair of 3Com3870 with a stacking cable gigabit switches.

  On clients: They are a mixture of Windows 2003, XP, and linux machines. They all connect to the network using bridged networks. Most of them have the vmware tools installed and works perfectly for whatever the need to do.

  On 10.2.0.154: It is a time recoding terminal (Kaba bensing 9320) I have several of them and they all have ping all right one on the host or guest.

  I tried to move the comments to connect to 10.2.0.154 for an ESXi4 server. This has solved the problem with ping, but gave rise to a more serious connection problem. While the ping works the timing couldn't software to connect to one of the terminals. This looks like another vSwitch problem, but now with the ESXi4 server software.

  I tried also to add static entry arp to the guest who must connect to 10.2.0.154, but this did not help.

  I'm confused, HELP?  :|

  PS. added a vnetsniffer newspaper. (FYI 10.2.0.154 does not work, 10.2.0.153 is the same type of terminal and works very well)

  I would simplify everything first and remove one of the two wires in your network adapters on your host win2003 and see if the problem goes away.

  -KjB

  VMware vExpert

  Don't forget to leave some points for messages useful/correct.

  Post edited by: kjb007

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

• Problem with finding the SmartGlass an Xbox to Store or App Store

  Original title: xbox a smartglass

  I can't find that the smartglass an Xbox on the windows store or the appstore please help

  Hi Ibrahim.

  Please contact Microsoft Community. I understand that you have a problem with finding the SmartGlass an Xbox to Store or App Store. I will surely you help with this.

  You can download Xbox a SmartGlass from the following Windows store link.

  http://apps.Microsoft.com/Windows/en-us/app/Xbox-one-SmartGlass/c3a46cb8-e733-4579-B716-862e123fa831

  For more information you can check the link.

  http://support.Xbox.com/en-us/Xbox-360/apps/SmartGlass-Info

  Hope this information helps. If you need more assistance or information on this question, reply to this message. I'll be happy to help you.

• Problem with installing the game "no apps are installed to open this type of link try find at the store.

  Original title: problem with installing the game

  install a game but saying o\s

  No apps are installed to open this type of link try find in the store and when I opened store it for the app its available nt tried compatibility troubleshooting but no use it please help

  Hi harsh,

  For a better understanding of the issue, I would need more information on your side.

  1. What is the name of the game you install?

  2. where did you install the game from?

  3. What is the full error message?

  4. the question facing you while opening the store Windows or you are looking for an app? Have what compatibility troubleshooting steps you tried?

  To resolve the problem with applications, I suggest you try the procedure described in the article and see if it helps.

  Solve problems with a soft

  Please provide the necessary information to help you further, I'll be happy to help you.

• Facing a problem with writing the custom for WLS identity assertion provider

  I am facing a problem with writing the custom for WLS identity assertion provider.

  Requirement:

  Asserter identity configured in WLS should get called when the following cookie is sent in a request by my application
  cookie name: OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I added the name of the cookie as a token of support and Active token in WeblogicCustomIdentityAsserter.xml
  
  < MBeanAttribute
  Name = "SupportedTypes.
  Type = "java.lang.String [].
  Writeable = "false".
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >
  <!-ActiveTypes attribute contains the subset of your mbean SupportedTypes who are active in the area. ->
  < MBeanAttribute
  Name = "ActiveTypes".
  Type = "java.lang.String [].
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >

  Problem:

  Identity asserter provider is not invoked for the request that has the cookie named OAMAuthnCookie_blr1234567.idc.oracle.com:7777.
  
  I did some experiments with the cookie name, to see where the problem could be
  
  Identity asserter provider is triggered for the following cookies:
  OAMAuthnCookie_blr1234567.idc.oracle.com7777.
  blr1234567. IDC. Oracle
  blr12_XXX. IDC. Oracle.com
  
  and it does not work for cookie name - OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I think that the name of the token supports not the colon. I don't have control over the name of the cookie, two points will always be
  
  Tried it with giving the name of the cookie after the encoding of the colon
  

  < MBeanAttribute

  Name = "SupportedTypes.

  Type = "java.lang.String [].

  Writeable = "false".

  Default = "new String() {& quot; OAMAuthnCookie_blr2211441.idc.oracle.com & #58;. 7777 & quot ;} »

  / >

  
  But still does not work
  Am I missing something? Any help will be appreciated.
  Help, please!

  colon ': ' is an illegal character in the name of the cookie.

  RFC 2616, Section 2.2 says:

  token = 1 *.

  separators = "(" | ")" | " <" |="" "="">" | " @"

  | "," | ";" | ":" | " \" |<">

  | "/" | "[" | "]" | "?" | "="

  | "{" | "}" | SP | HT

  It is clear ":" a "separator" and thus not allowed in a token or a cookie name.

• I have problems with downloading the Lightroom app! What is the location of the appropriate installation?

  I have problems with downloading the Lightroom app! I have already many programs Adobe works on my PC and I have a cloud of Adobe license. But now, with the installation of Lightroom, I get the following error:

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DF014...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  -Payload: Adobe Lightroom 6.0.0.0 {8048A5DF-8A70-5BE1-954B-E0FDE1BD0D0D}.

  ERROR: DF014: unable to create the symbolic link to ' \\XC-DC-01\Users\Patricia\... \Desktop\Adobe Lightroom.lnk "(Seq 6641).

  When I go to the solution, then it says: rerun the installation. Select a different installation location.

  
  

  But I tried to select all the other folders on my computer for the last two weeks and it still not working? Update other programs is not a problem, then I don't understand what goes wrong? What is the location of the appropriate installation? Why it changed on my computer?

  Can you help me with a solution? Thank you!

  Hello

  Please see Exit Code 7 Installing and errors ' Exit Code: 6 "," Exit Code: 7 "|"» CC, CS6, CS5.5

  Hope that helps!

  Kind regards

  Sheena

• I upgraded to ESXi 5.0 to 5.5 ESxi now when I ping the esx host, it fails.

  I upgraded to ESXi 5.0 to 5.5 ESxi now when I ping the esx host, it fails.

  I was able to ping before the update. Test management system also fails to ping the default gateway.

  I sent a private message you, could answer you on this one here? Got iso's, he's now testing in my lab, but I don't have that kind of network cards, you will need to do the real test for me.

• Problem with editing the content in the administration Console

  Hi I have problems with editing the my site published in the administration Console.

  Everything what top an embeded google map works fine, but everything below is not clickeble/editable.

  Someone else has this problem, and you have any ideas on how to solve the TI?

  Hello

  Will you please try to remove the code embed to Google Map and then check, because it seems that the code used is in conflict.

  Also test with the Google Map widget in the social widgets.

  Thank you

  Sanjit

• Problem with REPLACING the clause in Sybase

  I am facing a problem with REPLACING the clause in embedded SQL with a Sybase database.
  
  My Cold Fusion Server is MX 7.
  
  The database is the Adaptive Enterprise/12.5.0.3/EBF 10689 IR/P/Sun_svr4/OS Server 5.8/rel12503/1915/64-bit/FBO/Thu 23 Jan 16:05:19 2003
  
  That is the problem. I have a variable bureau_incode of Cold Fusion, which I use to set the values in my IN clause. When I comment on my request and display this value in the HTML page, bureau_incode has the following value:
  
  ('TAB', 'OGC', 'BIG', 'OLA', "MDG", "SEO", "OSP", "ANOTHER OWD ',' ', 'PSHSB", "CAT", "WTB")
  
  My CFQUERY embedded SQL looks like this:
  
  

  Quote:
  < name cfquery = "qResults" datasource = "#request.dsn #" >
  Select Name,
  bureau_code,
  Telephone,
  Mobile phone,
  Pager,
  E-mail
  Availability,
  Explanation,
  Password,
  Admin,
  last_login = convert (varchar (20), last_login, 0)
  of PAMS where availability = ' don't
  < #request.seltype # cfif IS NOT "ALL" >
  and bureau_code IN #bureau_incode #.
  < / cfif >
  < / cfquery >

• Problems with having a Remote Host for the server vCenter Server vSphere?

  Hello

  We have a single vSphere Host located in the United Kingdom and a host vSphere cluster type 3 in France. I plan to add the vSphere Host UK to the France of vCenter Server.

  Does anyone know of any problem with the addition of a vSphere Host of a vCenter Server that is in a remote site rather than on the local network?

  See you soon

  Vince

  I put my vCenter without problems. Just keep in mind not to create a cluster with 2 teams who are on different nodes. Only you can manage the remote ESX host

• Problems with getting the MacBook pro bluetooth to detect client devices he already never associated with.

  Hello.

  I am unable to get my Macbook pro to detect devices, that it has never been previously connected.

  The Macbook pro is detectable by the Bluetooth devices, but I don't seem to have an option to be able to detect the client devices.

  My macbook pro gives the possibility to be discoverable - mode client for example, I want to discover clients for example, speakers, headphones.

  My bluetooth speakers or headphones work fine on my Ipad so I know the beat headphones works well.

  The pro macbbook is detectable and I can connect by Ipad or phone for her, so I don't know the bluetooth on the Macbook works fine.

  Once coupled display in the area of discovery - and can be connected to.

  I think, basically, it means that the Macbook pro connects as a client - but I don't see an option to put in Server mode.

  How can I do so that it looks non-paired devices - I use 10.11.5 (15F34) attempts to connect to the Beats headphones.

  I have reset PRAM etc.

  I even tried plugging an external bluetooth USB adapter - this did not provide additional options.

  Concerning

  You have removed the devices you are trying to connect to the MacBook Pro? BT devices may only be connected to one thing at a time.

  Barry

• Unable to ping the remote host IP address

  I have a home network with 2 desktop computers, printer, TV and BlueRay attached.  The PC is both XP and members of the same workgroup.  I can't get the connectivity between the PC 2.  With 1 PC, I ping successfully all connected devices, with the exception of 2 PC.  2 PC, I ping equipment successfully connected, including 1 PC...  I get the same information using a different router and a different network on 2 PC card.

  I tried the following steps of the Article 314067:

  1. check on two PC's TCP/IP configuration.  Result: good on both PCs.

  2. use the ping tool to test connectivity.

  • Ping the loopback address.  Result: good on both PC
  • Ping to the IP address of the local computer.  Result: good on both PC
  • Ping the IP address of the default gateway.  Result: good on both PCs.
  • Ping to the IP address of the remote host.  Result: bad on PC 1, good on PC 2
  • Ping other IP addresses on the network.  Result: good on both PCs.
  • Ping the host name of the other PC.  Result: bad on PC 1, good on PC 2

  Article:

  If the ping command fails, the remote host may not be responding, or there may be a problem with the hardware of network between computers. To the rule

  on a remote host does not respond, use Ping again to a different remote host.

  If you cannot use Ping successfully at any time, verify the following configurations:

  1. Make sure that the IP address of the local computer is valid and that it is correct on the

  Tab general of the Internet Protocol (TCP/IP) properties dialog or box when it is used with the Ipconfig tool.  Result: good on both PC

  Make sure that the default gateway is configured and that the link between the host and the default gateway works. For the purposes of troubleshooting, make sure that this gateway by default is configured. You can configure multiple default gateways, gateways after the first gateway is used only if the IP stack determines that the original gateway is not working. Diagnosis is to determine the State of the first configured gateway. Therefore, you can delete all the other gateways to simplify your task.  Result: good on both PC
  Make sure that Internet Protocol security (IPSec) is not enabled. According to the IPSec policy, Ping packets may be blocked or may require security. For more information about IPSec, go to method 7: Verify Internet Protocol security (IPSec).  Result: good on both PC

  Thanks for your suggestions you may have.

  Hello

  Firewall such as Norton, McAfee etc can cause a loss of network connectivity, even when the network is correctly configured. Try disabling the firewall on both computers to see if the ping works.

  Tricky

• Having problems with ESXi/vSphere Client Network

  First of all, I apologize if it's thread is in the wrong section.

  I recently installed ESXi v6.0.0 in VMware Workstation 12.0 trying to familiarize myself with ESXi as I recently graduated and I forgot most of what I learned from the class I took.

  Then, ESXi installed smoothly and was very painless.

  Then, I tried to create a virtual machine. It's when things are messy. I can't understand why, but I don't get any network connectivity after obtaining a DHCP address to all within the virtual machine, in addition to being able to ping the host ESXi itself.

  First of all, networking is like so:

  10.10.10.1 router/gateway

  10.10.10.254 DHCP, DNS, server, VMware Workstation files 12

  10.10.10.250 ESXi host

  10.10.10.244 ESXi reviews - Windows 7

  Googles DNS 8.8.8.8

  VMware workstation 12:

  AMD FX-8350

  Intel Corporation 82574L Gigabit Network Connection

  NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) - However, not allowed to work with VMware VMware or xvnc throws a fit to this topic

  ESXi host

  Images: 2015-10-04_21-13 - 57.png, 2015-10-04_21-14 - 34.png

  The vSwitch has the following properties:

  Image: 2015-10-04_21-19 - 38.png

  
  

  And the following then occurs on the ESXi prompt:

  Images:,2015-10-04_21-01 - 58.png, 2015-10-04_21-03 - 32.png

  
  

  I can't really understand what the problem is, or what is happening. Yes, I could set up an internal network of the virtual machine with a firewall and what not, but I was hoping that there would already network connectivity while I wouldn't do. Also, is it possible to make attachments online?

  
  

  Thanks for all their help
  

  This could be a problem of permission on the host vmnet adapter, see http://kb.vmware.com/kb/287.

  André