problem with reading Fuze & clip [resolved]

Similar Questions

• Problem with read/write satellite U400 - 12 p PSU40E DVD on LG GSA-U10N

  Hello again,

  Another serious problem is the LG GSA-U10N DVD combo drive that comes with mine U400. For some reason he has serious problems with reading and writing to DVD. Doesn't depend on whether the media is expensive or cheap. It seems to read and write all the CD very well, however.

  I would like to avoid leaving service point (can take up to 3 weeks or more), because I need this laptop all the time.

  Is there anything we can do about it?

  My system - Vista Home Premium 32 bit has been restored to factory default and then fully update the site of microsoft, outside pilots. In addition, no other movements driver update has been made. It's just that you want it to be.

  Greetings

  > Doesn't depend on whether the media is expensive or cheap.
  Not really

  My notebooks drive can handle a lot of different CD and DVD from different manufacturers, there are cheaper and more expensive DVDs.

  I had a good experience with TDK DVD-R discs. In most cases, the burning procedure could be completed successfully
  But I had some problems with the other DVD writing.

  I think the whole issue is compatibility between the laser lens and DVD-surface and that's why I recommend you several DVDs from different manufacturers.

  Goodbye & good luck

• Problems with playlists on Clip +.

  Hello

  I am having some problems with the creation of playlists on the Sansa Clip + (4GB).  I have some MP3 files on the internal memory and I have no problem with the creation of playlists for these files.  But I have also some MP3 on my 8 GB MicroSD card (made by SanDisk, by the way) and I was not able to create playlists for these files.

  Let me clarify; I can create playlists for MP3 on the MicroSD card, but no matter where I store these playlists (internal memory or the card itself) I have problems.  If I store playlists on the internal memory of the content of these playlists disappears if I unplug the card.  Playlists are still there, but they are empty.  If I store those playlists on the MicroSD card (where are the MP3 files) and later to unplug the card, the playlists are transformed into something completely different.  The file names are replaced by something starting with a whole bunch of numbers and the playlists are not recognizable.

  I am also having the same problem when I copy MP3s directly on the MicroSD card - the names are changed and there are a bunch of unnecessary additional files added.  The problem gets worse if I put the music in the files on the MicroSD card.  At least if they are all in the same folder that I can get rid of unnecessary files.

  I should probably mention that I do not use the crazy method they recommend manual synchronization of the user with Windows Media Player.  It takes too long and it's too complicated.  Instead, I just select the songs I want in any playlist special (I copied on my micro SD my PC card) and make a right click on any of the selected files and a context menu appears and gives you the ability to create a Playlist - (in Windows XP SP3).

  It works very well on the internal memory.  This is how I did it on my regular Sansa Clip and it worked without any problem at all.  But it will not work with any files on my MicroSD card.  I did something wrong?  Or is my card MicroSD does not work properly?

  Any help would be greatly appreciated.  Thank you.

  Well, I solved the problem I've been create permanent playlists for MP3 stored on my MicroSD card.

  What I've discovered, is that the new Clip + doesn't seem to like the playlists created in Windows Explorer (i.e.; Choose the songs / right click / Choose "create Playlists) with the extension of file .pla .»

  Which works very well for any MP3 stored on the internal memory, but not for files stored on the card.

  I use a free program called Playlist Creator 3.6 to create playlists in .m3u format.  This is the format that works for MP3 files on the MicroSD card.

  I make selections in the folder my music is stored On MY PC - then I copy this .m3u playlist folder On THE MicroSD CARD where my MP3s are (those of the playlist I just created).

  You need to copy the list of reading in the same folder that your music is (on the map).  As long as the MP3 in the same folder as the .m3u playlist - the playlist will find them.

  Now, the playlist seems to be empty if you try to open them in Windows, but don't worry-there is work.  The info is still there.  And playlists keep the info and the names you give them even if you remove the card and later put it again.  Hope it will be useful to someone else.

• Problem with order of clip

  This is a question and request for suggestions.
  I'm very new to using first Pro CS4 using VideoStudio for a long time. But due to a mutitude of bug and constant crashes, I just let fall on her and made the transition to the first.

  I begin to develop projects of AVCHD clips. My camera creates each scene as a file. With VideoStudio I had to use TSmuxeR to merge them into a single clip, otherwise it would just fall more take hours (literally) to start because she wanted to check each hook. When you have hunderds in a project it is a problem.

  Prime Minister handles this much better doing things in the background, but I had some problems with clips are reordered. Maybe my approach is all wrong and I'm open to suggestions.

  For example, I break the clips in segments that relate to a topic and put in a bin. So, in a project, I would have 700 clips into 10 bins with 50 to 100 clips in each location. And I might have a dozen projects which constitute a 'production '. But when I import clips (IE windows) the last clip always happens to be the first imported. It is a common windows problem which I do not know how to move. In any case, when it gets imported I then rearrange clips. Clips from your device name is a time code date as 20100514082312.mts which is unique and you can order by date very easily, but it is really hard to read.

  The problem that I seem to have if I take a bin (that' it'sbeen sort) and drag it to the timeline, the last clip gets always inserted first. I guess that the Prime Minister is to remember the order that the clips had import and not how I trie in the bins.

  Because I tend to move things around a lot, it is a concern to keep deting first clips and then put on the end of the sequence, etc..

  Is there a way to get around this? As do enforcement in the stick of bins, or order the clips by name in the time line or maybe bring imported in the correct order in the first place?

  Or is the way I'm doing this all wrong. I admit it's hard to give up the way I did things in VideoStudio which could impose some bad habits.

  There is something else you can try - select the media and to automate for the timeline. You can tell it to not add transitions and do not overlap, and there are options to overlay the clips in the order of sorting or the order of selection. Try to select clips in the order of your choice.

  If there is something else in the trash you want, like a sequence, you may need to select all, uncheck what you want and then automate.

• problems with reading card compact flash

  Hey, I recently bought a mac and I have a problem with she read my cards compact flash. I have a 64 GB scan disk card and a canon 5 d mark II camera.

  I get the error message that disk was bypassed and that the files could not be read. so I can't transfer my photos on my mac. I can, however, transfer them on a pc and then on a usb key that works on my mac. but this isn't the solution. I contacted apple support and was on the phone with them for over an hour and still no solution... who can help me?

  First thing to try is getting the pictures safely out of the map and then using the command format of the camera to erase and reformat - this will usually solve this type of problem

  LN

• Problem with reading file xls with text inside

  Hi all

  I have a problem to read the excel (xls) file with the first line containing chains of different length.

  I wonder how can I skip the first line and continue reading of the second line.

  Thank you very much.

  I only have saved VI.

  So here are the names.

  Downstairs: open the file.  Text reading file with lines of selected reading (right click for the menu to find).  Read the text file with lines of reading not selected.  Close the file.  At the top is spreadsheet String to Array.

• Problem with read (byte [], int int.) in BONE 5.0.0.604

  Is there a known issue with reading does not correctly in the latest versions of OS 5?

  I have an existing application that works perfectly on all devices 4.2.1 BB + OS... except for devices running the latest versions of OS 5.0.0 when I test on the Simulator for OS 5.0.0.604 (generic), I get strange behaviors using the read() method on the InputStream created from InputConnection.openInputStream () of an HttpConnection.  The problem occurs only when connecting using deviceside = true.  It does not affect MDS.  What I see is:

  read (buffer, index, length) fills a 1024 bytes of the buffer with the http response data internally.

  then, it ignores the first 152 bytes and returns the rest of 872 in the buffer parameter.  The returned value for the number of bytes read int is correct.  that is, 872.

  Subsequent calls to read() to return the same 872 bytes. ... He never advances through the flow to return the rest of the data.

  Method available() at any point returns the length of the http response (in this case, 2685)

  In all previous versions of the operating system, using the same code, it returns all the 2685 bytes in a single call to read()... I'm puzzled.  Also has anyone seen this behavior?

  I had problems similar to the 8830, but with an o/s 4.2 or 4.5

  Finally I changed my read() to read a single byte at a time, rather than a buffer and that solved

  My question.

  If I remember correctly, in my case, I knew the total length and was reading in pieces,

  move my shift in the buffer, the amount of data returned by read(byte[],init,int)

• is anyone else having problems with reading or a frequency to chashes?

  playback is bugs audio cuts out for no reason, it may or may not start charge ram reading where it was started or anywhere in between also... also problems with AE 'read' the files when the time comes to render. He had no problem while working with them, but when it comes to accidents rendering and error message indicates that it cannot read the file... it's not real complicated, either this is a quicktime animation HD codec. I liked the 2014 AE version, better it is more solid. !

  The corrections after effects CC 2015 (13.5.1) update is available, with great difficulty to previews and more: http://adobe.ly/1Il5JYe

• Problems with reading the series bytes

  Hello

  I currently have a PIC18F microcontroller serial communication with LABview using the base read and write.vi series. The PEAK sends strings such as "V222! (V is the character of the header, and! being the end character). Then, I have a program to take each individual character read and concatenate them in a larger string for data extraction. The port has been configured to 38400 baud and be only a single byte of long.

  The captain sends this one byte at the time and the problem here is that LABview seems to be only reading V most of the time, and occasinally has 2. Since it doesn't seem to be never read the end character, the sequence of extracting data from my code is never executed.

  A few questions I have are:

  The captain may send one byte at a time, but also all other devices communicate through a serial port.  The definition of the serial port involves both a byte.  Actually it's really a LITTLE at a time.  But serial port parameters leads to the gathering of 7 or 8 bits to produce a byte.  The PEAK sends a follow-up byte to another byte, etc.  The time between shipments of the byte may be too small to read contiguously in your Labview program.

  At very slow speeds, it could really work.  At 300 baud (3mS / bit), there are 33 mS to send a byte (8-bit + stop bit, start bit).  So if your loop runs fast enough, you get every byte one at a time.  But there is the overhead of other code to store the bytes, etc..

  38000 baud to only 0.2 mS to send a byte.  LabVIEW is not fast enough to loop at this rate to capture all the bytes individually.

  But why bother?  Simply capture all the bytes and treat them as a complete message.

• Problems with reading aloud; It is not more than 1 page

  Hi-

  In the old days, Adobe Acrobat Reader to be able to read whole books aloud.  I've got Windows 8.1 on a laptop cheap (meaning not a lot of memory), and even when I select 'read aloud' and then 'read the document will end' it stops at the end of the page. I tried to highlight a selection of several pages, and it will not always cross the line of the page.  It is pretty useless, if I press my computer every 2 minutes to go to the next page and press 'read out loud '.  Any ideas?

  PS I think it is reprehensible that in 2016, 26 years after the ADA, ADE still is not having a read aloud feature, or even just a supplement to convert into a non-savable format that can be read by the reader.  Adobe voice is much better than some other readers and made better with the odd punctuation, which is part of the reason why it should be made accessible.

  While they have not been marked for accessibility? Are you on Windows?

  You could try to recreate one using this method to see if she takes care of the problem:

  • Open a Word doc
  • Click on the Acrobat Ribbon
  • Click Preferences > general and make sure that enable accessibility and reflow with tagged Adobe PDF is enabled.
    
  • Click the create a PDF file

  Test the new PDF. There are several ways to create PDFs but PDFMaker (which adds the Ribbon Acrobat for Windows) is the preferred method and provides more control over the conversion.

  You can learn more about the preparation of files to meet the requirements of the ADA here:

  Adobe Acrobat DC accessibility features

  Using Acrobat Pro DC accessibility checker

  Creating an accessible PDF - Office Support

  We had the opportunity to create documents conform to 508 since Acrobat for years, but my observation is that most of my students have no idea how prepare files to satisfy, before coming to class.

• Problems with breast movable clip button

  I'm building a click through submission that has a small text in there. To keep the design and allow for readability, I added a zoom feature.

  Here is the structure of the film,

  Stage - contains movie clip pages and front and rear market click on buttons to change pages

  pages_mc - contains 24 images, one page per frame and buttons

  There is a button at the _root level that uses a tweener to the scale of the pages_mc up to 170%. When it is clicked, it allows pages to be dragged around the screen, so you can watch the different sections. When you click the new button, it returns pages to their original size continues to slide.

  My problem is, on the pages, there are buttons with links to external sites. Once a startDrag has been invoked, I can't touch the buttons inside the clip. Is it possible to make these buttons work?

  I need fast finish so any help is welcome.

  Code below

  magUp_btn.onRelease = function() {}
  This ._visible = false;
  TweenLite.to (pages_mc,.25, {_x:-250, FLF:-193, _xscale:170, _yscale:170});})
  TweenLite.to (magUp_mc,.75, {_alpha:0});})
  TweenLite.to (magDown_mc,.75, {_alpha:25});})
  magDown_btn._visible = true;
  pages_mc.onPress = function() {}
  this.startDrag ();
  }
  pages_mc.onRelease = function() {}
  this.stopDrag ();
  }
  pages_mc.onreleaseoutside = function() {}
  this.stopDrag ();
  }
  pages_mc.useHandCursor = false;
  TweenLite.to (instr_mc, 1, {_alpha:100});})
  }
  
  magDown_btn.onRelease = function() {}
  TweenLite.to (pages_mc,.25, {_y:0, _xscale:100, _x:0 and _yscale:100});})
  TweenLite.to (magUp_mc,.75, {_alpha:25});})
  TweenLite.to (magDown_mc,.75, {_alpha:0});})
  This ._visible = false;
  magUp_btn._visible = true;
  pages_mc.onPress = function() {}
  this.stopDrag ();
  }
  TweenLite.to (instr_mc, 1, {_alpha:0});})
  }

  I don't know how to disable slide when I zoom out without using the command delivery, but I know it is probably what is happening in the way of the work of button?

  Thank you!

  One option is to make the background of pages parts draggable rather than clips that contain pages and buttons.  In this way, the buttons could be at the top of the background and do not have their access blocked.

  Instead of coding the pages_mc, you'd essentially have the background coded for the drag...

  pages_mc.bkgnd.onPress = function() {}
  startDrag (this._parent);
  }

• problems with reading / ReadLine and great textfiles

  Hello

  I am trying to write a very simple little application that removes wrinkles in a text file. My approach is:

  fHdle = OpenFile (fName, VAL_READ_ONLY, VAL_OPEN_AS_IS, VAL_ASCII);

  fOutHdle = OpenFile (fOutName, VAL_WRITE_ONLY, VAL_TRUNCATE, VAL_ASCII);

  While (ReadLine (fHdle, buf,-1)! =-2) {}
  If (FindPattern (buf, 0, -1, "SequenceID", 1, 0) ==-1)
  WriteLine (fOutHdle, buf,-1);
  }

  CloseFile(f) (fHdle);

  CloseFile(f) (fOutHdle);

  This works perfectly well when the files are small, say I copied the lines first ~ 1000 of my original text into a new file, when I try with the big original file (~ 10 MB / 200,000 lines), it is not, the buffer is empty, 0 bytes read but no FmtIOErr. Any help is very appreciated!

  Thanks in advance the tons

  Just a simple suggestion: I'll try to add an error checking and see if an error during playback. Is something like this:

  While ((erreur = ReadLine (fHdle, buf,-1))! =-2) {}

  If (error ==-1) {}

  error = GetFmtIOError ();

  Messagepopup ("error", GetFmtIOErrorString (error));

  }

  }

• I have a problem with reading. WAV files.

  So I tried to mix these sounds to make cool music, but when I open something like Audacity, it sounds completely different when played in windows media player, I am really confused. Has it to do with codecs or bit rate or something like that? Any help is appreciated. Thank you!

  Evan,

  What is the version of Windows installed on the computer?

  Is the question limited to Audacity?

  I'd like you try to play different music files.

  In addition, I would have you read these articles.

  http://support.Microsoft.com/kb/316992#top

  http://Windows.Microsoft.com/en-us/Windows/codecs-frequently-asked-questions#codecs-frequently-asked-questions=Windows-7

  We know if that helps you.

• Problem with Sansa Fuze 8 GB... It's... But black screen, won't play, will not turn off... Nothing...

  Well I got it for about a week now... got for Christmas... it has worked well since then... but this morning that I was listening to the song it... completed one then he switched to the next as usual... He plays even one second and the screen went black... but the thing is... its again because you can see the back clear even if its black... and the blue light around the spinning wheel is on results also... I tried holding the button of power... nothing... does... I tried to click all the buttons on wheel... nothing also... click on the House the lock button... nothing too... I tried pluging in there but he has yet to read on the computer and nothing happened to the screen of the reader... and the thing is the only way to turn it off is the power switch, but it does not work... so the only thing I can find died just see if it works and try pluging it in there... try to turn it on... or maybe he emerges from this... I don't know everything... but if anyone has had this problem or if it can be fixed somehow or if I can get it sent to get fixed or something... I would like to know please... thank you all so much for your time and have a good...

  But for now I'm not going to click on something else and nothing spoil... Also I need a way... If possible... that wont deleat al of my music off it... and I can't connect and transfer it to the computer, so im screwed... but so so so be it...

  Have you tried to hold the power switch for 20 seconds to reset? (does erase all files)

  d

• Problem with reading on the computer devices.

  HI - first timer here. I hope I'm posting in the right place.

  Let's start with a picture.

  

  The image 'Before' is more or less what my device drivers dialog box looked like before I did
  the error that I will discuss. (More or less because I did an image search on Google to find a)
  image close to my original configuration and displays.)

  The image of the 'After', this is what it looks like now.

  How I got here, it's that I've been playing with the sound on my laptop Toshiba Satellite P755-S5215 (Windows 7, 64-bit). Right click on the Realtek device, I saw "disable." By mistake, I thought it would be grey on the speakers and then I'd be able again to the right and select 'enable '. Simple - but wrong.  Disable meant 'remove.'

  So now some of the applications that require the Realtek device do not work, even though I can still hear the sound in my headphones.

  Am, I watered? Or is it possible to get the speakers to work?

  Thanks in advance.

  Kind regards
  -Prom

  Been answered in another forum - thought I'd stop here.

  Right click in the dialog box opens a context menu with the option

  to display hidden disabled devices. I did it, allowed the unit again.

  Problem solved.

  Kind regards
  -Prom