Problem with rear roller with continue combination
Experts,
I work in JDev 11.1.1.6.0. I am facing a problem when I roll with the combination continue.
My code snippet
While (VO.hasNext ())
{
Try
{
Row = (Row) VO. Next();
business logic
getDBTrasaction () .commit)
}
catch (System.Exception e)
{
getDBtransaction () .rollback (); / /
continue;
}
}
Imagine that I have 3 rows and 1 rank obtained exception and roll back and continue doing it then but vo.next still give/pointing to the same line because rollback ADF will reset the current line to the first always, but I want to continue to the next rank, how can achieve us?
Pouvez one facing this kind of problem?
-Thank you.
When a downturn comes all iterators open have their current line pointer, reset the first record in the defined folder, so what is needed to restore the current row of the iterator after making back. This can be done either by the creation of the current line of iterator or does not call back himself and use the following code to refresh the current line and commit the transaction.
catch(Exception e)
{
if (currentrow != null) {
currentrow .refresh(currentrow.REFRESH_UNDO_CHANGES | row.REFRESH_FORGET_NEW_ROWS);
getDBTrasaction().commit()
}
}
Tags: Java
Similar Questions
-
problem with my combination fn and ESC keys
I want to check my information screen but my esc + fn noy keys work? What can I do?
Hello
Download and install the latest version of the HP system on the following link event utility.
http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69229.exe
When the installation is complete, restart the laptop.
Leave windows completely charge for a few minutes before checking if the fn + esc combination works.
Kind regards
DP - K
-
LOCATION:
-I am developing a software plugin based on plug-ins based on LabVIEW classes that are instantiated in running. Plugin real classes come from the plug in generic classes that define interfaces to the VI instantiation and can provide basic functionality. This means that many of the methods of the class are dynamic distribution and even methods of child classes can call the parent method.
-Plugins top level (the ones directly accessible by the main VI) each have a run method that animates a plug-in specific state transitions.
-Transitions of the plug-in data acquisition (DAQ class) class calls a method of the DAQ class that reads data from an FPGA card OR and transmits to another component via a queue.
PROBLEM:
-Higher sampling rate, a FPGA-to-host FIFO overflow occurs after some time. When I "weigh" the system just by moving a window of Firefox browser on the screen, the overflow is triggered immediately. I did not have this kind of problem in older software, where I was also reading a FIFO of FPGA, but made no use of LabVIEW classes or diagrams.
SOLUTIONS I'VE TRIED (WITHOUT SUCCESS):
-J' put the transitions in a timed (instead of a simple while loop) loop that I assigned specifically to an own kernel (I have a quad-core processor), while I left all the other loops of my app (there many of them) in any simple loops. FIFO overflow still occurs, however.
QUESTION:
-Does anyone have a tip how I could fix this problem? What could be the cause: dynamic distribution methods, the acquisition of data of state transitions or just the fact that I have a large number of loops? However, I cannot change the fact that I have dynamic distribution methods because it is the essence of my architecture...
Tips are greatly appreciated!
I've now changed the execution priority of all the screws involved in reading of the FPGA FIFO '(highest) priority critical time '. This seems to be improving the situation much: so far I have not a FIFO overflow, even when I move around the windows on the screen. I hope it stays like that...
-
On several occasions, I have installed the new Flash Player. However, when the use of Firefox continues to ask Web sites (e.g. maps.google.com, etc.) to download the new Flash Player. I did so completely and repeatedly and restarted.
I don't have this problem with other browsers.
There are 2 versions of Adobe Flash; an ActiveX version for IE only and a plug-in version for most of the other browsers like Firefox. On a Windows system, you must always update both individually. You don't have the Plugin version installed for Firefox, if you did, you will see "Shockwave Flash" in the Add-ons > Plugins.
- With Firefox, click the direct download link below and SAVE the download on your desktop, so you can find it later: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
- When the download is complete, close Firefox (file > button OR exit Firefox > exit)
- Click or double-click the file that you just saved on your desktop
- In the install window that appears, select the check box to the left of "I read and...» "to place a check mark in the box of
- The button 'Install' in the lower right corner is now highlighted, click it.
- Installation is quick.
- Launch Firefox and test your installation here: https://www.adobe.com/software/flash/about/
- ActiveX for IE onlydirect link version: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe
If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.
-
Designjet 111 roll: problem with Hp designjet 111 roll
Hello
I have problem with Designjet 111 roll. I reinstalled the driver delivered with CD, and the most recent Web site and the effect is always the same. When I enter the Properties window, I see this:
There is no chance to put anything. How can I solve this?
Hello
The System Maintenance Utility will not be related to a problem with the printer driver.
Have you deleted the driver as explained on the following doc?
http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-bpp03332
-
Hello, account Windows Live from my wife was hacked a week ago and has been used to send many spam emails. As a result, his account has been disabled or closed (we are not sure). Whenever she asks to reset a password and a link sent to a different e-mail account, when she clicked it gets this message 'there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. "She is tried repeatedly, but get the same message. Someone knows how to go beyond that, so she can recover her account? Thank you.
Hello BBB34,
The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:
Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.
-
I have registry problems. My games drive no longer works: he continues to show that there is a problem with fmod.dll, then when I fixed an error occurred -FSOUND-Sample_Load@16. Also, ITunes says that there is a registry problem. We have inadvertantly deleted something or can other software recently installed it cause it was working fine until we installed a vivtar camera.
Can provide you advice on how I can overcome this problem.
Concerning
original title: update windows
Hello
Method 1:
I suggest you uninstall all third-party software and then try to perform the system restore.
How to restore Windows XP to a previous state
http://support.Microsoft.com/kb/306084
Method 2:
I also suggest to perform a system analysis File Checker.
File system (CFS) Checker
Post back with the results for further directions.
-
How can I add an ID related when I get this message (there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later.) ?
Hello
an answer your other thread
-
Original title: scams?
I continue to receive calls from numbers not available with an Indian accent saying that they are from the Technical Department of windows and I have a problem with my computer. Normally, I just say that I don't have and hung up. Today, I took a little further and he said that they discovered that I had loads of malware/viruses etc and that they could identify with them. I was obviously very suspicious because he seemed to have my correct Windows ID number and with care on 'Run' he told me to type things like cmd eventviewer and inf where he referred to a file 1394.pnf. I stopped while he asked remotely to access my computer. However, I got a phone number 01916450337 and his P786000 id I noticed that many people are posting on your forum-is this another one of those scams?
Continue to put the phone down. They are all crooks.
They get you to open Event Viewer, because there are words such as 'critical' and 'error' along the this.
-
error 1723
my system is continually showing error 1723 when removing java, it shows that I have problem with my windows install?Help, please...and could u please suggest ways to update java for the system and for programming.Which version of Java should I download for my system to Windows 64-bit operating?
http://www.Java.com/en/download/FAQ/java_win64bit.XML
Download errors: 1305, 2755, 1606, etc..
http://www.Java.com/en/download/help/error_installshield.XML
Installation of Java
http://Java.com/en/download/help/index_installing.XML?user_os=Windows%207Download the appropriate java installation file and save it on HD physically disconnect your computer from the internet, it's true - pull the Ethernet cable or disconnect the wireless connection. Install the installation file java (note: no error message). Back to zero (not sure if necessary, but do it anyway). Reconnect to the internet and your java work.
-
I bought a book on Photoshop CS many years ago, and once I installed it in my computer it says I should I enroll the account in order to use Photoshop (or something similar), and it also has a link to go directly to the website of the registry. The problem comes when I try to access this link given, which is an internet link. It appears that my Internet connection is not secure, so I'm not allowed to continue the process, even if I don't really no problem with the connection. As I'm talking about an older version of Photoshop CD, the problem might be that something related to the incompatibility with my version of microsoft. How can I solve this problem, if there is no possible solution?
Hello
You can try to use a different browser for this. You can also save the product key by following the steps
(1) connect to Adobe.com/accounts
2) click on the plans and the product.
3) click view your products.
(4) enter your serial under register no. your products
-
Problem with French characters and combined Variables.
Using Captivate 4 and by publishing in SWF, I discovered the behavior noted below.
You can see a text caption
The text of the first line of Captivate is "change the Word settings - $v_ScoreParam$ $/ 10'"
When published the e is transformed into a Chinese character.
Is this a known issue? Or I do something wrong?
Thanks for the clues.
Hello
It is a problem experienced in Captivate 4 (there are several discussions in this forum about this), and sorry, it has not been resolved in CP4, but no problem to CP5 (doesn't help of course).
I had a lot of problems with this. The only solution is to put this variable in a separate text caption and try to put it in place in the other text of legend. Personally, I've avoided using these variables when expected combination (like e to u...) characters.
Lilybiri
-
When I go to netflix to watch a movie it still says theres a problem with the installation Sliverlight 2105 error code. I uninstalled and reinstall but get the same message.
Run this Microsoft Fix it
-
windows Vista mail problem
have problems with windows mail with vista, it will not send an email he just keeps asking to verifery user, a password have checked all the settings a knowledge they are correct... can connect to the server an everything is ok... get this error msg... Account: 'att.net', server: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] invalid username or password. (#YSH001)', port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92... on this for 2 days may not understand... Please help?
Hello
I suggest you to follow the steps in this link and check if it helps:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-MailFor more information, see this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-MailIt will be useful.
-
Problem with a continuous loop
This file was supposedly changed from As2 As3. It seems as if she used to stop when I got it. But the links do not work. When I followed the troubleshooting protocols, he began an uninterrupted loop.
Help, please. I can't attach the flv file and action script files. What I get from the window output is "fonts must be included for any text that can be changed during execution, other than text with the parameter"Use Device Fonts". Use the text > order embedding fonts to embed fonts. »
Help, please. I paid a coder for the as2 to as3 file, and that's what he gave me...
contact this encoder and let them know the problem. If it's a problem with their code, they should repair free of charge.
Maybe you are looking for
-
When I run firefox, for example by clicking on the program in windows Explorer, it opens multiple blank copies of firefox. I got up to 25 open with a single click. I have to manually close all but remaining and one lost the toolbar customization.
-
control the mouse using models
Hello dear Experts! Can someone please replicate the following VI which creates the YouTube link following this guy? https://www.YouTube.com/watch?v=dtSN0MHRLWk I have little experience with LabView and work on a similar project. Help, please. Thank
-
Hi all BlackBerry has presented the training program for the developer Webworks and certification, what are the benefits and are there fees for training
-
How do I change entering Windows Live Mail from POP3 to IMAP mail server. I have a Windows 7 PC
When I added my icloud email address in Windows Live Mail I inadvertently put POP3 for server inciming and now I can't change it.
-
cannot install/update apps CC - exit 15.
It started with cannot access PIM - so I used adobe cleaner - now I get failed - progress bar is at 42%-, then breaks down, Learn provides more no info except the 15, clicking on more info output shows code 15, but - 0 errors. WTF?I'm under el capit