Problem with rounding

Similar Questions

• Problem with rounding numbers?

  I have the following code, which is part of my web application that I use the liquid on:

  {% assign BService = BsumService | divided_by: BdivisorService-%}

  This generates a number like this: 3,166667.

  Then I run the present:

  {{BService | round: 1}}

  This should, unless I've misunderstood something, exit: 3.2 but the problem is it does not change the output. I always 3,166667. I tried tour: 2 with the same results.

  What happens here? I use incorrectly round: x? Is this a bug?

  I must point out that ceiling, floor and around the work. The only one who doesn't is round: x.

  Yes Alex, that's how BC's spit that so that would need fixing.

  Lynda... During this time before I do around it a... | replace: ',','. ' with her

• Problem with @Round

  Hi all
  
  I have the following problem. I use @Round (member name, 2) for 3 members. But parent member of dynamiccalc with the aggregation operator is displayed as 16212.960000000001. How is that possible? And how can I solve this problem. Others displayed like this:
  15689.94
  178,7
  344,32
  
  Thank you

  Write a formula for Member to Member dynamic calc with function @ROUND.

  See you soon... !!!

• problems with the text and rounded rectangles

  So I have some rounding of the rectangles in fireworks, then export as fxg, and import it into flash catalyst - but they lose the roundness of rectangles square become. Also have problems with the text as half displaying or doesn't appear do not at all.

  feature request

  -would be really cool to be able to change the paths in flash catalyst

  -Edit the code in code view

  see you soon

  brand

  Hi, the absence of a property of corner radius is a limitation of the FXG export command in Fireworks CS4. We work closely with the Fireworks team to improve interoperability FXG in CS5.

  Thank you for your comments and suggestions.

  -brian

  Team Flash Catalyst

• Problem with some values in the round of text

  Hello

  I have a problem with the control of the "ring of text.

  In my software, I need to update the values of ring of text, using a property node. But some values are not included by the ring of text, even if they are defined inside.

  I agree with you an illustration of my problem and the piece of code that does not work, I hope you can help me

  Thank you

  Julie

  Probably a result of the fact that the floating point numbers cannot represent exactly every real number.  Up to 0.4 is not exactly equal to 1e6 4th-7 x.

• Problems with the screen resolution, Cloud based software and Photoshop after the last round of updates Windows 8.1.

  Original title: screen resolution problems.

  Since the last series of Windows 8.1 update the resolution of my monitors has been changed for the worse. I use an AOC 2367 M (resolution 1920 x 1080) as my first monitor and a 42 inch Sony Bravia (resolution 1920 x 1080) as my 2nd monitor. The changes are more noticeable on the Sony Bravia and any adjustment I make to the resolution only make worse it.

  I also have problems with some software clouds as I load using citrix and when I try and navigate once opened software, I can't because the pointer selects a point about 50 mm on the side of the where he is hovering. In fact it is very difficult to open and close as anything and I resorted to the laptop to get concrete results.

  Photoshop now also comes up with a message when I open it up to inform me that the monitor profile seems to be defective.

  Any suggestions would be helpful as I thought initially an another upgrade must follow to correct the ills of windows 8, but appears not to have happened.

  Hi Joseph,.

  Thanks for the reply.

  Method 1:

  I suggest you to download and install all Windows updates available including optional updates. You can also install the latest device drivers for all devices including display drivers and monitor drivers on the manufacturer's Web site.

  http://eSupport.Sony.com/Perl/select-System.pl

  http://www.aocmonitorap.com/root/ANZ/download_driver.php

  Method 2:
  Adobe Photoshop CC version 14 is compatible with Windows 8.1. See Windows Compatibility Center for more information. To solve the problem with Photoshop CC, I suggest you try the procedure described in the article and see if it helps.

  Cloud applications help creative /CC crash immediately after launch
  http://helpx.Adobe.com/Photoshop/KB/CC-applications-crash-immediately-launch.html

  If the problem persists, I suggest you to contact the Support from Adobe.

  http://helpx.Adobe.com/contact.html

  To solve the problem from software hosted accounts, you may need to contact the Support to count.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Problem with the rounded Rectangle tool

  I want to change the average RADIUS (right arrow) but now it's only let me pick 1 RADIUS and anything in between.

  

  You use a Wacom Tablet? There is a problem with the drivers Wacom causing the corners QUICKLY change which sometimes may appear as a step as if you quickly press the arrow key.

  This has been fixed for a version or two, then slipped in the.

• Problems with the transfer of information from old Microfiber again...

  I bought a new iPad 2 Air and gave my old air to my husband to replace his ipad 2.  Have implemented twice as problems with e-mail i. When I send a message from my new pad, it is sent to my husbands name.  Went into the settings to change the information, but its number is out there and I can't change it.  It wil I would like to change emails but not the number.

  In addition, I can't take my email look old to replace his e-mail.  Have been going round in circles for hours and have lost it now.

  Hello

  When the ipad is intended to be used by someone else, you must disable find my iPad in the settings.

  Then restore iPad to factory settings then its ready for the new user.

  You and your husband please have your own apple ID, but do not both use the same.

  See you soon

  Brian

• Equium P300-16 t - problem with volume wheel

  Equium P300-16 t
  just installed windows 7 64-bit

  having problems with the volume dial if I try and adjust the volume using wheels he iratic even if I click on the speaker in the taskbar.
  If I open ie Notepad and wheel is the round automatically shows "cccbccbcc".

  BIOS update
  Installed hardware 3.0.1.0
  Pretty 4.98.6.61
  Value Added Package 1.2.40
  Reg Patch 1.2

  Hello

  Have you noticed the same problem on Windows preinstalled (Vista?) too much or only on Windows 7?

• Problems with Satellite A300 - 1GC XP install - CD does not?

  Hello

  I have a few looks to round in various forums and found no answer to everything.

  I have the Satellite A300-1GC and had (from last night) vista on it. As caused Vista
  a lot of problems with different programs, I decided to get rid of him.

  The problem is now--if I stick my XP installation CD it it bed "press any key to boot from CD".
  Do that and then nothing happens. The CD read head stops going back and forward
  but nothing happens at all. Not even the beginning of the blue installation screen.

  Any ideas where this comes from?

  The CD-rom can also be run in AHCI mode (can a CD player what do I do?) and requires drivers?
  I have tried various CD XP - neither work. The last one I had was with SP3 and build in February 2009 so quite recent.

  Clues?

  See you soon
  Tobimaster

  Hello

  In your case the question has nothing to do with the SATA mode (AHCI mode or Compatible) but it looks like the CD/DVD drive cannot handle the Win XP disc
  Why? Who knows

  Always is it that the CD cannot be read and so the installation can not get.

  Try to copy this disc by using another computer and then you can try using the disc copied on order to install Win XP.

  Just FYI: I use TDK (CD and DVD) r discs... I am very satisfied

• Problem with window painted and scrollbars when editing (LabVIEW 8.0.1)

  I'm under LabVIEW 8.0.1 in Windows XP SP3.  For my main VI, I came across a strange problem about 5 months ago.  The front window - both in edit mode and run mode - arrested repaint itself on the right side which is no longer visible when you scroll from top to bottom, but also visible overlapping Windows.  Coinciding with the repaint problem, both bars scroll search disabled grey arrows and no boxes in the bars that you can click and drag to scroll the window.  The scroll bars work still partially if you pass the mouse over it and roll the mouse wheel but does not work by clicking and dragging.

  The façade has a lot of controls and indicators, including containers of tab control and is greater in the horizontal directions and vertical so the two scroll bars must be active.  But I deleted everything in the Panel before and everything in the schema and the problem persists.  If the problem is not directly related to a control/led display.

  I saved the simple VI to this problem (using a line of large text and a high box rounded to test), and then created a new VI and copied the two elements at the new VI.  This new VI didn't paint it and the problem of the scroll bar.  The two screws are slightly different in the memory usage and the revision number (bad is review 1785 and the good is revision 3), but otherwise the two screws are identical.  I have attached two screws at this announcement.  When you first open the bad VI, you will see the scroll bars disabled while the good VI has active scroll bars.  To replicate the repaint problem, scroll the window up and down with your mouse wheel.  If it's good when you first open the VI, click on another window, then click on the window of VI and try again the mouse wheel.  This by clicking sur-loin-and-return always causes the problem of repaint for me.  I tried the screw on two different computers, both running Windows XP SP3 and LabVIEW 8.0.1 with identical results.

  Here's what I discovered simple troubleshooting with the screws:

  always off scroll bars

  * repaint the problem in the main window for larger then 680 pixels of window widths

  * repaint the problem in the menu bar of the main window for widths of more than 646 pixels

  * entire window becomes disabled than 1348 pixels window width

  * can paint window minimize and restore, but only repaints only once

  * scrollbar boxes sometimes flicker in the display, but then disappear

  * Scroll left and right hovering mouse over the bar and horizontal scroll by using the mouse wheel

  I found something similar on this forum (thread: problem with refresh of façade)-it could be linked to the CAR on the Panel being offset internally.  I don't have access to LabVIEW 8.5 or later and do not plan to upgrade - I have not tried the trial version, as this user has done.  I could try to copy and paste my set of the block for a new VI diagram but the VI is so important I'm afraid something would break, plus I don't want to do it again in a few months.  The problem seemed to occur after a certain number of stops (or revision number).  I save copies of backup often and when the problem first happened, I was able to go to a previous version, make the missing changes and save it without any problem, but this only delayed the problem and he came later.  It is therefore perhaps the revision number.  It seems not related to a change or a particular addition in the front panel and the graph.

  The attached picture shows the repaint problems and scroll bar in bad VI.

  This raises a question I have - if this problem is a bug has been fixed in 8.5 and later, is it possible to apply bug fixes for older versions?  Or what I need to pay for an update fix these bugs?

  Seems that something got corrupted with this VI. Things to copy on a cool VI and things should be OK.

  See also this recent report of a similar problem.

• problems with a Probook s 4530 and earn 8.1 x 64 and card RALINK Wireless

  Good afternoon

  I have reported a problem with the installation of Win 8.1 Enterprise on a HP Probook 4530 s which has a RALINK RT3592BC8 wireless card installed.  This card has the info printed on it.

  Rev: 01:00

  SPS:630813 - 001

  Release date: 2011/05/21

  Mac ID: 68A3C4BBD32E

  CT: GBRFA00FK0M86K

  SPS: 630813-001

  HP part number: 629887-001

  WCBN607RH-H1

  THE COMIC BOOK ID: 68A3C48947BF

  The laptop had already installed a copy of the company to earn 8 x 64.  the laptop was working fine on this OS, however we migrate to Win 8.1 Enterprise but this laptop would never apply the inplace upgrade.  We were trying to replace the older readers of 5200 RPM in laptops, and I bought an SSD 250 GB EVO 840, and as I was replacing the HARD drive, I also decided to install Win'a 8.1 x 64 business.  The installation went well until installing Windows begins loading the drivers.  Around 60% the error came that there was an error "irq not less or equal to".  I checked the HARD drive in another machine and was able to install a business Win 8.1 x 64 on it, so I wiped the install and tried again.  Failed a second time.

  At this point, I thought that there was a device that Win 8.1 wasn't satisfied and as by chance the wireless card was easy access to the laptop so it was my 1st point of call.  Installation went through after withdrawal of the wireless card and try again the installation of win, fine.  I was also able to install our 2013 Office without problems and the 1st round of updates to victory.  On the 2nd round, I thought I want to reinstall the wireless card, for cranking up the dreaded irq not less or equal to returned to the top and the machine was in a reboot cycle.  During a start/stop cycles, I turned off and removed the wireless card and the machine very well.

  It seems that there may be a problem with the card stock RALINK RT that comes with a HP 4530 wireless.  At this point, I had to remove the card from the laptop, until I can find an alternative.

  I see a lot of messages about the causing problems ralink drivers/device, but I can't seem to find the right driver to use for the x 64 bit 8.1 on a 4530 (map exceed the details) and what the correct procedure is to have this card works correctly for future upgrades of windows?  can someone enlighten me please?

  Thank you

  Mike

  Hi, Mike:

  The only suggestion I can offer is to try the latest version of the driver Ralink W8.1.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_142231_1

  If this does not work, I suggest you only replace the card wireless with one of those enrolled in the service manual has a better chance of working with W8.1, such as an Intel wireless card.

  When I click on the support page for the 4530 s, I see only a limited amount of W8.1 drivers available which normally isn't a good thing about the compatibility of the device 100% with an operating system.

• Problems with fractional alarm levels

  Hello

  We use LV8.6 with module DSC under XP Pro.

  I am building an application that needs to configure/monitor alarms on deployed locally variable shared double digital.

  I don't seem to be able to define levels of fractional alarm through in Distributed System Manager or Project Explorer. For example, I'm trying to set the alarm HI_HI to 1.50 level. What I see, is that the values change when I get it, but it gets rounded up to the nearest whole number if I open properties for this variable shared once more (or property node allows you to read).

  If I use the node property to set the levels I am able to get fractional values. There is a problem with automatic receipt of the alarm in this case, although (the alarm do not auto-reconnu when the value of the variable returned to non-alarme interval).

  I would appreciate comments on the issues that I am experiencing.

  Thank you in advance!

  Far below the level of the alarm you have tried going?  In LabVIEW 2009 at least, there is a dead zone which can be defined for each alarm.  By default, the dead zone is 1, which means that you must pass at least one point below the alarm so that it auto-reconnaître.  Herea good help file that explains exactly how it works.  In short, if you want to auto-reconnaître when the value is less exactly the alarm level, then you have a dead zone of 0.  I hope this helps.

• In Windows XP hearts game, problem with the notation.

  I get too many points when I get 1 or 2 rounds of heart or not points when I get several tips of heart or the Queen of spades. The score is not correct. What is the problem with that?

  Hi maur4you,

  You can try to turn off and turn on the game in Windows XP Add/Remove Windows components and check.

  See the following article:

  How do I add or remove games in Windows XP

  http://support.Microsoft.com/kb/307768

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• problem with qmlRegisterType

  Hi I have a problem with qmlRegister for the use of an onFarenheitChanged signal for my weather app, when I build and run, has no problem except that when the application starts, the accident with a message like this

  Process 2016309487 (WeatherNow) terminated SIGSEGV code=2 fltno=11 ip=7844f196(/base/usr/lib/qt4/lib/libQtDeclarative.so.4.8.5@_ZN36QDeclarativePropertyValueInterceptorC1Ev+0x711) mapaddr=0014f196. ref=07a4f2f8 bdslot=1
  

  and this is the code

  CPP

  WeatherNowApp::WeatherNowApp()
  {
      QCoreApplication::setOrganizationName("conias media");
      QCoreApplication::setApplicationName("WeatherNow");
  
       qmlRegisterUncreatableType("bb.device", 1, 0, "BatteryChargingState", "");
       qmlRegisterType("My.Library", 1, 0, "QTimer");
       qmlRegisterType("Network.ExternalIP", 1, 0, "ExternalIP");
       qmlRegisterType("Weather.Now", 1, 0, "WeatherNowApp");
       //! [0]
  

  HPP

  #ifndef WEATHERNOWAPP_HPP_
  #define WEATHERNOWAPP_HPP_
  
  #include 
  #include 
  using namespace bb::cascades;
  
  namespace bb
  {
      namespace cascades
      {
          class Application;
      }
  }
  
  class WeatherNowApp : public QObject {
      Q_OBJECT
  
      Q_PROPERTY(bool useFarenheit READ useFarenheit WRITE setUseFarenheit NOTIFY useFarenheitChanged)
  
  public:
  
      WeatherNowApp();
      Q_INVOKABLE void showPhotoInCard(const QString fileName);
  
  Q_SIGNALS:
      void useFarenheitChanged();
  

  and the qml

  import Weather.Now 1.0
  
  attachedObjects: [
  WeatherNowApp {
              onUseFarenheitChanged: {
  
              }
          }
  ]
  

  the qml missing changes to the label and that, but it does not even withouth code in there, so this isn't a problem on the internal code, suggestions?

  SIGSEGV error basically tells you that your application's RAM that does not belong to her or trying to run a class via an invalid pointer method.

  Do I have reason to assume that the WeatherNowApp class is the UI of your main application class? If Yes, I am confused why you would be save with QML, then by attaching to a page in QML. It is not normal to save the UI class main QML in the constructor of this class even with qmlRegisterType().

  I think that maybe what you really do is pass the instance of the main application to QML as a context property. If you try to respond to a signal of your main UI in QML class, then you should do so with the connect() function. Something like this instead:

  WeatherNowApp::WeatherNowApp()
  {
      QCoreApplication::setOrganizationName("conias media");
      QCoreApplication::setApplicationName("WeatherNow");
  
      qmlRegisterUncreatableType("bb.device", 1, 0, "BatteryChargingState", "");
      qmlRegisterType("My.Library", 1, 0, "QTimer");
      qmlRegisterType("Network.ExternalIP", 1, 0, "ExternalIP");
  
      QmlDocument *qml = QmlDocument::create( "asset:///main.qml" ).parent( this );
  
      // ---Make this app object available in QML
      qml->setContextProperty( "app", this );
  }
  

  Page {
     id: myPage
     function onUseFarenheitChanged() {
        if (_WeatherNow.useFarenheit == true)
           weatherDataTemperature.text = Math.round((jsonweather.temp)*1.8+32);
        else {
           weatherDataTemperature.text = Math.round(jsonweather.temp);
        }
     }
     onCreationCompleted: {
        app.useFarenheitChanged.connect(myPage.onUseFarenheitChanged);
     }
  }
  

  BTW, it makes no difference to the code, but you poorly spelled fahrenheit.