problem with secure access

Similar Questions

• Problem with secure access TOSHIBA HDD 500 GB

  Hello
  I have a problem with access to my secure HARD drive. The problem is when tha HDD is pluged in the USB port, the software Nomad2 says that the disk is not formatted. Anyone have idea what type of partition is assembling the nomadic desktop software?

  What I want to know is: when you connect your HARD drive is recognized properly and listed in Windows Explorer?
  Can list you all the commands and data using Windows Explorer?

  You have the same problem with HARD drive with different laptops and desktop computers?

• Problems with "security access control list '.

  Hello
  
  My system is configured as follows
  UCM - 11 GR 1 material - 11.1.1.4.0 (Build: 7.3.0.180)
  -Database 11 GR 2
  OracleTextSearch - engine is used
  RoleEntityACL - component is enabled
  -Parts of my config.cfg

  SearchIndexerEngineName=OracleTextSearch
  IndexerDatabaseProviderName=SystemDatabase
  UseEntitySecurity=true

  I want to create lists of access control for users, groups, and roles. I followed the the next page http://download.oracle.com/docs/cd/E17904_01/ documentatoindoc.1111/e10792/c03_security.htm#CDDBCIDA
  Everything seems to work fine at first, because I'm able to add users, groups, and roles to the ACL of the document. The problem is that adding a user, group or role of the ACL of a document does not affect the rights of a user a of the document.
  
  Example:
  -Wear a read access to "public"-SecurityGroup
  -UserB is to check in a "document1" to the SecurityGroup 'public' and adds UserA to the ACL of "document1" give UserA 'read' and 'write' access to "document1".
  -The result is that UserA doesn't have to 'write' access to "document1", well it is in the ACL (same problem with groups and roles)
  
  In this scenario shouldn't UserA have "write" access "document1" or I have a bad understanding of access control lists?
  
  Thanks in advance
  Brahim

  You heard wrong...

  Permissions through ACL are subject to the same rules of intersection between the permissions granted by the intermediary of roles or accounts.

  If you want write access to a document, you must have at least write access to the security group of the document, account and have RW permissions in the ACL.

  In other words work ACL on top existing accounts/groups and roles that they do not replace the existing UCM permissions. You can restrict the permissions by an ACL but not grant permissions that the user has not already set for the account or the security group.

  And by are the ACL way ugly generally impassable and unmanageable so if you have to use them all to be very careful!

  hope tha helps
  Tim

• problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  problem with write access to truecrypt readers windows 7. The mounted drive is not writing priveliges. Read-only. Cannot change in the security permissions.

  Hi amcop4591,

  1. How is - that Mount you the drive on the computer?

  2 Di you use any third-party tool to mount the drive?

  I suggest that you remove the external drive using the disk management and check back later if you can change the permissions on the drive.

  If you change the permissions, make changes to the permissions on the drive and then mount the drive.

  Mount or dismount a drive

  http://Windows.Microsoft.com/en-us/Windows7/mount-or-dismount-a-drive

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with the Access toolbar buttons

  Hi, I have a problem with the Access toolbar buttons. instead of icons, it shows just 2 boxes, as we get police unknown boxes. Help, please.

  Hi, I have a problem with the Access toolbar buttons. instead of icons, it shows just 2 boxes, as we get police unknown boxes. Help, please.

  Hello

  Those who are not traditional icons they are symbols that belong to the Segoe UI police.

  See the following Web site for an excellent tutorial to solve this problem.

  [SOLVED] Unknown character or vertical Rectangles are appearing in place of metro icons in the Windows 8 start screen and login screen - tweaking with Vishal:

  http://www.askvg.com/fix-unknown-characters-or-vertical-rectangles-are-showing-in-place-of-Metro-icons-in-Windows-8-start-screen-and-login-screen/

  Let us know if it works for you.

  Concerning

• Problem with user access rights invited after the installation of el capitan (10.11.6)

  After that I installed OS X El Capitan (10.11.6), I can't change the way the guest user can access applications.

  When I change the usage rights of the guest user in Control Panel (user admin), everything's fine. Safari is the only application that I leave available. But then, nothing has really changed and guest user can use all applications. When I make the change, the guest user is disconnected (otherwise changes cannot be made).

  Could someone help me in this problem.

  There are problems with Parental controls do not stick in El Capitan.

  There is a long thread about this; of some people have found workaround solutions, but they do not always seem to work.

  OS X El Capitan: controls parental NOT work

• Problems with HTTPS access site after upgrading to FireFox 30.0

  I have problems to access our HTTPS Corporate sites after upgrade to FireFox 30.0 of the Mavericks MAC or receive an error message "user not authorized" or the page does not load. I was able to access Web sites mentioned above when you use 29,0 FF. I have read and tried all the items on support to clear the cache and cookies, remove and reinstall the software, trying to change the SSL level & remove the cert8.db and cookie files in the profile.

  Internal just to validate that it was not a problem with our Web site, I tried and was able to access these sites via Safari for MAC Mavericks. I'm looking for what anyone help possible.

  Thank you
  Jim

  Many issues of the site can be caused by corrupted cookies or cache.

  • Clear the Cache

  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > network > content caching Web: clear now

  and

  • Delete Cookies

  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then confidentiality.
  Under historical, select Firefox will use the custom settings.
  There is a button on the right side, called View the Cookies.

  If there is still a problem,
  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart.

• TECRA A10 - 11 M - problem with TOSHIBA accessibility

  Hello to the forum.
  I have a TECRA A10 - 11 M (a Greek market system) and after I faced many problems with Windows VISTA
  I installed with Windows XP Professional, the legendary Microsoft OS recovery CD.
  Here I have faced a problem with my buttons of accessibility. My function keys do not work!
  The message is: this system cannot be used "TOSHIBA accessibility.
  I uninstalled and installed again the feature, but nothing happened.
  Y at - it a program known that affect my system and prohibits any accessibility to work properly?
  Can anyone help with this?

  Thank you in advance,
  Vassilis

  _ @ dvass66_
  The FN keys need to installation of common Modules and Hotkey utilities for display devices.
  Common modules must be installed first!
  Also I recommend the update to the BIOS too

  _@korenisko_
  > I think that problem on this laptop is Wifi Atheros card
  I put t know why you think this, but I put agree t
  I have Atheros WLan card and since I use the latest BIOS and WLan driver everything works perfectly.
  Vista turn too stable, but indeed it needs MS patches and update my Vista updates more than once a week...

• Problem with remote access in a residential group

  Having a problem with desktop sharing remote within a group of home access.  I don't have problem of access to the desktop from the laptop, but for some reason I can't access the laptop from the desktop.  I tried everything I could think of.  Remote access is enabled on both PCs.  Help, please.  Thank you very much!

  Hello

   

  1. who is the operating system installed on the desktop and laptop computers?

  2. what happens when you try to access the laptop from the desktop? You receive an error message?

  3. What are troubleshooting you performed?

  I suggest you follow these methods and check.

  In a first step of troubleshooting, I suggest to run the troubleshooter to group on the source and the destination computer.

  Step 1: Open the troubleshooter group living

  If your computer has problems viewing computers or files shared in your collective housing, try to use the collective dwelling Troubleshooter to fix the problem

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Step 2: Share files and folders on a group of houses in the laptop using the method proposed below. Try to access from desktop and check.

  a. right click on the item you want to share, and then click share with.

  b. Select Home Group (read/write)

  c. this option share point with your entire Home Group and allows them to open, edit, or delete.

  Share files with someone: http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  See also:

  Home Group: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

   

  I hope this helps!

• Cisco VPN problem with security update KB3057839 for Vista

  Someone had problems with any connection Cisco VPN works after the installation of update of security KB3057839 for Vista? When this update is installed, the pop-up to enter the password and user id not come, need to use the Task Manager to close the program. The first time I went back to the restore point to get my VPN to work, this time I tried to reinstall the VPN but that doesn't work anymore. I started to uninstall updates (had 7 of them), when I got to it, KB3057839, the VPN began working again.

  Mike

  See this on the real issue:

  http://www.chiark.greenend.org.uk/~sgtatham/PuTTY/wishlist/Vista-update-breaks-config.html

  It turns out that the logon dialog box is invisible, but still, it agrees to enter you your password and LOG you!

• Problems with internet access, troubleshooting, Windows 7 does not work.

  Hello, I have recently started up to Windows 7 on a partition of Windows 10, because a game wasn't working properly on Windows 10 system (has notified downgrade after a one hour session troubleshooting).

  I don't know if the game is causing these issues or anything else, but my internet connection goes away, even if the internet bar shows that it has internet.

  Right now, I'm typing this, it says I have a problem.

  

  Also, I have troubleshooted a lot of times, with the answer is:

  

  This happens at random, or whenever I join a game for Minecraft.

  Does anyone know the solution to this problem?

  Other images:

  

  Hello

  You can see the answer given by Arya S Asok by mentioning the problem with adapter or wireless access point

  Let us know how it goes.

  Kind regards

• Problem with security update KB2667402, cannot install

  Original title: KB2667402

  An old Asus 1005pe netbook, yes the "Seashell" is still ongoing, problem with the above security update. Windows Update shows this update "has failed" to install. I checked the list of updates installed and found it even already installed. I think that the date, from 2012. I'm of the mindset that you 'don't fix if it is not broke' and 'if it is fixed, don't break again. " My questions are:

  If the update is already there, why is Windows up-to-date call for this again? It is already not working?

  My backstory is, this netbook was sitting on the shelf for five years before taking it out for use. Of course, I knew that update was necessary, so I put WU on the move with more than 238 updates on a single call. I don't know there was more, WU was executed several times.

  I ran the journal of reliability to see how the computer has been assigned, he showed a level of performance after the updates. The list of success or failure of update installs show more failures of this one update.

  My Adventure continued with Asus and their Asus "Live update" is now uninstalled and the function of the bios update goes to the site but does absolutely nothing. It's a question of Asus but part of my adventure too.

  I read another thread on this issue and a gentleman uninstalled the existing KB2667402 and leaves the new update to replace.

  If WU has this update on the new list, is the original in fact "broken" and need to be replaced?

  I do not want to solve this problem, if it is not broken. I hope that's not too talkative, I'm looking to understand and learn as well. I'm not even sure categories below are correct, please bear with me.

  Thanks for your time.

  Hello

  I realize has the inconvenience that you are experiencing with Windows updates. I will certainly help you to question.

  I suggest you follow the steps mentioned below:

  Method 1:

  Run the Windows Update Troubleshooter that refer to the link below:

  http://Windows.Microsoft.com/en-pH/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2:

  Reset the Windows Update components that refer to the link below:

  https://support.Microsoft.com/en-us/KB/971058

  Method 3:

  If you use a third-party security software, try to disable the third-party security software and check. Disable third-party security software.

  a: you should see an icon for your Antivirus program in the taskbar notification area. It is usually at the bottom right of your desktop.

  b. click the third-party security software, you will see a pop up.

  (c) in this pop and select the option to disable, click on it.

  d. now third-party security software will be disabled.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished.  If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  For more information, you can also check out the link below:

  Problems with installing updates

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Problem with internet access point

  Hello, I saw that this question was asked before, but has never seen a solution to my problem, I will explain:

  I have like 5 months with this problem. I have a TP-LINK 300Mbps Wireless N Router, model No. TL-WR841ND. The fact is that when I plug in my router to the Modem, my wireless network seems to work fine, but when I try to connect to my computer or any other device to the network (mobile phones, playstation 3, tablets, etc.), I am unable to do so. On my laptop, I get the message: 'Problem with wireless adapter or access point', but the most confusing thing is that sometimes I can connect to the Internet via my network wireless without any problem.

  This time I decided to post my problem, because I'm tired of it. Sometimes it happens, sometimes it doesn't. Right now, I have two days without Internet connection (Via router), because my modem works properly.

  PS: I have another router (Linksys) and I can connect to this network, but I want to solve my problem with the TP-Link because the signal is stronger. Help!

  See links.

  How to install a TP-LINK wireless routers (Recommended)?

  http://www.TP-link.com/LK/article/?faqid=92

  Why can I not access the Internet after connecting the TP-LINK router to my modem.

  http://www.TP-link.com/LK/article/?faqid=138

  TP-Link FAQ.

  http://www.TP-link.com/LK/support/FAQ/?keywords=TL-WR841ND

• Internet Explorer problems with secure endpoint AMF

  Everyone ran into problems with Internet Explorer using (https) secure AMF channel endpoint?
  
  I'm calling a ColdFusion via RemoteObject in Flex component via AMF channel set with a prefixed by https endpoint. It works very well with FireFox but fails with Internet Explorer. Internet Explorer works fine if I use the same end point just ordinary http prefix.
  
  I read that you need to add < add-no-cache-headers > false < / add-no-cache-headers > services - config.xml, but even after that it doesn't always on channel secure.
  
  Any ideas?
  
  
  
  

  There are a few things you can try. Take a look at http://weblogs.macromedia.com/lin/archives/2006/08/flex_app_works.cfm

  Thank you
  Gerard

• Problem with remote access VPN on ASA 5505

  I currently have a problem of an ASA 5505 configuration to connect via VPN remote access by using the Cisco VPN Client 5.0.07.0440 under Windows 8 Pro x 64. The VPN client will prompt you for the user name and password during the connection process, but fails soon after.

  The VPN client connects is as follows:

  ---------------------------------------------------------------------------------------------------------------------------------------

  Cisco Systems VPN Client Version 5.0.07.0440

  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.

  Customer type: Windows, Windows NT

  Running: 6.2.9200

  2 15:09:21.240 11/12/12 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  3 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  4 15:09:21.287 11/12/12 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "*." **. ***. *** »

  5 15:09:21.287 11/12/12 Sev = Info/6 IKE/0x6300003B

  Try to establish a connection with *. **. ***. ***.

  6 15:09:21.287 11/12/12 Sev = Info/4 IKE / 0 x 63000001

  From IKE Phase 1 negotiation

  7 15:09:21.303 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) to *. **. ***. ***

  8 15:09:21.365 11/12/12 Sev = Info/6 GUI/0x63B00012

  Attributes of the authentication request is 6: 00.

  9 15:09:21.334 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  10 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" ag="" (sa,="" ke,="" non,="" id,="" hash,="" vid(unity),="" vid(xauth),="" vid(dpd),="" vid(nat-t),="" nat-d,="" nat-d,="" vid(frag),="" vid(?))="" from="">

  11 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

  Peer is a compatible peer Cisco-Unity

  12 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

  Peer supports XAUTH

  13 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

  Peer supports the DPD

  14 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

  Peer supports NAT - T

  15 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000001

  Peer supports fragmentation IKE payloads

  16 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000001

  IOS Vendor ID successful construction

  17 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SENDING > ISAKMP OAK AG * (HASH, NOTIFY: NAT - D, NAT - D, VID (?), STATUS_INITIAL_CONTACT, VID (Unity)) to *. **. ***. ***

  18 15:09:21.334 11/12/12 Sev = Info/6 IKE / 0 x 63000055

  Sent a keepalive on the IPSec Security Association

  19 15:09:21.334 11/12/12 Sev = Info/4 IKE / 0 x 63000083

  IKE port in use - Local Port = 0xFBCE, Remote Port = 0 x 1194

  20 15:09:21.334 11/12/12 Sev = Info/5 IKE / 0 x 63000072

  Automatic NAT detection status:

  Remote endpoint is NOT behind a NAT device

  This effect is behind a NAT device

  21 15:09:21.334 11/12/12 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  22 15:09:21.365 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  23 15:09:21.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

  24 15:09:21.365 11/12/12 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  25 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700008

  IPSec driver started successfully

  26 15:09:21.474 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  27 15:09:27.319 11/12/12 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  28 15:09:27.319 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

  29 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  30 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

  31 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

  32 15:09:27.365 11/12/12 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  33 15:09:27.365 11/12/12 Sev = Info/5 IKE/0x6300005E

  Customer address a request from firewall to hub

  34 15:09:27.365 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK TRANS *(HASH, ATTR) to *. **. ***. ***

  35 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  36 15:09:27.397 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" trans="" *(hash,="" attr)="" from="">

  37 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_ADDRESS:, value = 192.168.2.70

  38 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_NETMASK:, value = 255.255.255.0

  39 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (1):, value = 192.168.2.1

  40 15:09:27.397 11/12/12 Sev = Info/5 IKE / 0 x 63000010

  MODE_CFG_REPLY: Attribute = INTERNAL_IPV4_DNS (2):, value = 8.8.8.8

  41 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SAVEPWD:, value = 0x00000001

  42 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_DEFDOMAIN:, value = NCHCO

  43 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_PFS:, value = 0x00000000

  44 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000E

  MODE_CFG_REPLY: Attribute = APPLICATION_VERSION, value = Cisco Systems, Inc. ASA5505 Version 8.2 (5) built by manufacturers on Saturday, May 20, 11 16:00

  45 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = MODECFG_UNITY_SMARTCARD_REMOVAL_DISCONNECT:, value = 0x00000001

  46 15:09:27.397 11/12/12 Sev = Info/5 IKE/0x6300000D

  MODE_CFG_REPLY: Attribute = received and by using the NAT - T port number, value = 0 x 00001194

  47 15:09:27.397 11/12/12 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  48 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000056

  Received a request from key driver: local IP = 192.168.2.70, GW IP = *. **. ***. remote IP address = 0.0.0.0

  49 15:09:27.412 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK QM * (HASH, SA, NO, ID, ID) to *. **. ***. ***

  50 15:09:27.444 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  51 15:09:27.444 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:status_resp_lifetime)="" from="">

  52 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000045

  Answering MACHINE-LIFE notify has value of 86400 seconds

  53 15:09:27.444 11/12/12 Sev = Info/5 IKE / 0 x 63000047

  This SA was already alive for 6 seconds, setting expiration 86394 seconds now

  54 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  55 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(hash,="" notify:no_proposal_chosen)="" from="">

  56 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000013

  SEND to > ISAKMP OAK INFO *(HASH, DEL) to *. **. ***. ***

  57 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000049

  IPsec security association negotiation made scrapped, MsgID = CE99A8A8

  58 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000017

  Marking of IKE SA delete (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED

  59 15:09:27.459 11/12/12 Sev = Info/5 IKE/0x6300002F

  Received packet of ISAKMP: peer = *. **. ***. ***

  60 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000058

  Received an ISAKMP for a SA message no assets, I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924

  61 15:09:27.459 11/12/12 Sev = Info/4 IKE / 0 x 63000014

  RECEIVING< isakmp="" oak="" info="" *(dropped)="" from="">

  62 15:09:27.490 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  63 15:09:30.475 11/12/12 Sev = Info/4 IKE/0x6300004B

  IKE negotiation to throw HIS (I_Cookie = A3A341F1C7606AD5 R_Cookie = F1F403018625E924) reason = DEL_REASON_IKE_NEG_FAILED

  64 15:09:30.475 11/12/12 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by "DEL_REASON_IKE_NEG_FAILED".  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  65 15:09:30.475 11/12/12 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  66 15:09:30.475 11/12/12 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  67 15:09:30.475 11/12/12 Sev = Info/4 IKE / 0 x 63000001

  Signal received IKE to complete the VPN connection

  68 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  69 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  70 15:09:30.475 11/12/12 Sev = Info/4 IPSEC / 0 x 63700014

  Remove all keys

  71 15:09:30.475 11/12/12 Sev = Info/4 IPSEC/0x6370000A

  IPSec driver successfully stopped

  ---------------------------------------------------------------------------------------------------------------------------------------

  The running configuration is the following (there is a VPN site-to-site set up as well at an another ASA 5505, but that works perfectly):

  : Saved

  :

  ASA Version 8.2 (5)

  !

  hostname NCHCO

  Select hTjwXz/V8EuTw9p9 of encrypted password

  hTjwXz/V8EuTw9p9 of encrypted passwd

  names of

  description of NCHCO name 192.168.2.0 City offices

  name 192.168.2.80 VPN_End

  name 192.168.2.70 VPN_Start

  !

  interface Ethernet0/0

  switchport access vlan 2

  Speed 100

  full duplex

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.2.1 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP address **. ***. 255.255.255.248

  !

  boot system Disk0: / asa825 - k8.bin

  passive FTP mode

  access extensive list ip NCHCO 255.255.255.0 outside_nat0_outbound allow 192.168.1.0 255.255.255.0

  access extensive list ip NCHCO 255.255.255.0 inside_nat0_outbound allow 192.168.1.0 255.255.255.0

  inside_nat0_outbound list of allowed ip extended access all 192.168.2.64 255.255.255.224

  access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap allow 192.168.1.0 255.255.255.0

  access extensive list ip NCHCO 255.255.255.0 outside_1_cryptomap_1 allow 192.168.1.0 255.255.255.0

  Standard access list LAN_Access allow NCHCO 255.255.255.0

  LAN_Access list standard access allowed 0.0.0.0 255.255.255.0

  pager lines 24

  Enable logging

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  mask of VPN_Pool VPN_Start VPN_End of local pool IP 255.255.255.0

  ICMP unreachable rate-limit 1 burst-size 1

  ASDM image disk0: / asdm - 645.bin

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (outside) 0-list of access outside_nat0_outbound

  Route outside 0.0.0.0 0.0.0.0 74.219.208.49 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  Floating conn timeout 0:00:00

  dynamic-access-policy-registration DfltAccessPolicy

  network-acl outside_nat0_outbound

  WebVPN

  SVC request to enable default svc

  Enable http server

  http 192.168.1.0 255.255.255.0 inside

  http *. **. ***. 255.255.255.255 outside

  http 74.218.158.238 255.255.255.255 outside

  http NCHCO 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set esp-3des esp-sha-hmac l2tp-transform

  Crypto ipsec transform-set l2tp-transformation mode transit

  Crypto ipsec transform-set vpn-transform esp-aes-256 esp-sha-hmac

  Crypto ipsec transform-set esp-3des esp-sha-hmac TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_SHA

  Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS_ESP_3DES_MD5

  Crypto ipsec transform-set transit mode TRANS_ESP_3DES_MD5

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set

  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5

  crypto dynamic-map dyn-map 10 set pfs Group1

  crypto dynamic-map dyn-map transform 10-set, vpn l2tp-transformation-transformation

  dynamic-map encryption dyn-map 10 value reverse-road

  Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS_ESP_3DES_MD5

  card crypto outside_map 1 match address outside_1_cryptomap

  card crypto outside_map 1 set pfs Group1

  peer set card crypto outside_map 1 74.219.208.50

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  map outside_map 20-isakmp ipsec crypto dynamic outside_dyn_map

  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  outside_map interface card crypto outside

  inside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP

  inside crypto map inside_map interface

  card crypto vpn-map 1 match address outside_1_cryptomap_1

  card crypto vpn-card 1 set pfs Group1

  set vpn-card crypto map peer 1 74.219.208.50

  card crypto vpn-card 1 set of transformation-ESP-3DES-SHA

  dynamic vpn-map 10 dyn-map ipsec isakmp crypto map

  crypto isakmp identity address

  crypto ISAKMP allow inside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 10

  preshared authentication

  3des encryption

  md5 hash

  Group 2

  life 86400

  crypto ISAKMP policy 15

  preshared authentication

  aes-256 encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP policy 35

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life 86400

  crypto ISAKMP ipsec-over-tcp port 10000

  enable client-implementation to date

  Telnet 192.168.1.0 255.255.255.0 inside

  Telnet NCHCO 255.255.255.0 inside

  Telnet timeout 5

  SSH 192.168.1.0 255.255.255.0 inside

  SSH NCHCO 255.255.255.0 inside

  SSH timeout 5

  Console timeout 0

  dhcpd address 192.168.2.150 - 192.168.2.225 inside

  dhcpd dns 216.68.4.10 216.68.5.10 interface inside

  lease interface 64000 dhcpd inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  internal DefaultRAGroup group strategy

  attributes of Group Policy DefaultRAGroup

  value of server DNS 192.168.2.1

  Protocol-tunnel-VPN IPSec l2tp ipsec

  nchco.local value by default-field

  attributes of Group Policy DfltGrpPolicy

  value of server DNS 192.168.2.1

  Protocol-tunnel-VPN IPSec l2tp ipsec svc webvpn

  allow password-storage

  enable IPSec-udp

  enable dhcp Intercept 255.255.255.0

  the address value VPN_Pool pools

  internal NCHVPN group policy

  NCHVPN group policy attributes

  value of 192.168.2.1 DNS Server 8.8.8.8

  Protocol-tunnel-VPN IPSec l2tp ipsec

  value by default-field NCHCO

  admin LbMiJuAJjDaFb2uw encrypted privilege 15 password username

  username privilege 15 encrypted password yB1lHEVmHZGj5C2Z 8njferg

  username, encrypted NCHvpn99 QhZZtJfwbnowceB7 password

  attributes global-tunnel-group DefaultRAGroup

  address (inside) VPN_Pool pool

  address pool VPN_Pool

  authentication-server-group (inside) LOCAL

  authentication-server-group (outside LOCAL)

  LOCAL authority-server-group

  authorization-server-group (inside) LOCAL

  authorization-server-group (outside LOCAL)

  Group Policy - by default-DefaultRAGroup

  band-Kingdom

  band-band

  IPSec-attributes tunnel-group DefaultRAGroup

  pre-shared key *.

  NOCHECK Peer-id-validate

  tunnel-group DefaultRAGroup ppp-attributes

  No chap authentication

  no authentication ms-chap-v1

  ms-chap-v2 authentication

  tunnel-group DefaultWEBVPNGroup ppp-attributes

  PAP Authentication

  ms-chap-v2 authentication

  tunnel-group 74.219.208.50 type ipsec-l2l

  IPSec-attributes tunnel-group 74.219.208.50

  pre-shared key *.

  type tunnel-group NCHVPN remote access

  attributes global-tunnel-group NCHVPN

  address pool VPN_Pool

  Group Policy - by default-NCHVPN

  IPSec-attributes tunnel-group NCHVPN

  pre-shared key *.

  !

  class-map inspection_default

  match default-inspection-traffic

  !

  !

  type of policy-card inspect dns preset_dns_map

  parameters

  maximum message length automatic of customer

  message-length maximum 512

  Policy-map global_policy

  class inspection_default

  inspect the preset_dns_map dns

  inspect the ftp

  inspect h323 h225

  inspect the h323 ras

  inspect the rsh

  inspect the rtsp

  inspect esmtp

  inspect sqlnet

  inspect the skinny

  inspect sunrpc

  inspect xdmcp

  inspect the sip

  inspect the netbios

  inspect the tftp

  Review the ip options

  !

  global service-policy global_policy

  context of prompt hostname

  no remote anonymous reporting call

  Cryptochecksum:15852745977ff159ba808c4a4feb61fa

  : end

  ASDM image disk0: / asdm - 645.bin

  ASDM VPN_Start 255.255.255.255 inside location

  ASDM VPN_End 255.255.255.255 inside location

  don't allow no asdm history

  Anyone have any idea why this is happening?

  Thank you!

  Add, crypto dynamic-map outside_dyn_map 20 value reverse-road.

  With respect,

  Safwan