Problem with 'size of available shrink space' when you try to partition disk
I spent a good amount of time trying to partition my drive hard so that I can start in Windows Vista and XP, but I am still unable to do so. My ultimate goal is to improve the transition from Vista to Windows 7 (with the upgrade disk), while being able to boot Windows XP.
I have a 320 HDD with 170 GB free. There currently have Vista Business 64 - bit installed on it. Initially the shrink size was only 280 MB. I read online that I would need to defragment that I did.
I tried to defrag the hard drive with Perfect Disk 10 and Disk Defragmenter Vista several times. However, the only amount that was released, totaled at least 1 GB.
I tried shrinking the HDD again, make a separate 984 MB partition. Unfortunately, this is the largest size I amable to get.
In addition, I tried of using DiskPart to shrink, what with the same problems.
Can someone help me please?
Thank you
VaioDownstate
System files it would be arrested.
See if the help above as a workaround.
See you soon. Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Problems with iTunes 12.1.3.6 when you try to upgrade phone IOS 10.1
Cannot update my iPhone software iTunes is prompting me to update 12.1.2 but I'm already on 12.1.3.6! Tried to uninstall and reinstall iTunes but same error. When I click on update to iTunes, the update briefly button greys out but then reappears, and nothing happens. (My PC running Vista). Help!
Try these helps out If you can't install or update iTunes for Windows - Apple Support
-
Vista update problems. It goes in a loop when you try to update.
Vista goes in a loop when you try to update. The loop is as follows: - control panel update windows for checking updates for windows updates-installnew update softwear-install now the user account control continue download and installation of updates = control of update windows for updates on your computer-check updates - so this loop repeat any help woul be received gratefully
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
-
Hello
I get the following error message when you try to import the permanent record:
Script is attached.
Thank you!
In the message, it seems you are trying to change the permissions on the root of your vCenter so that no account is found with full access.
It is built in safety mechanism that avoids making your unmanageable vCenter.
-
Problem with the sync audio to video when you use Windows Movie Maker version 6.0
I have a HP Slimline Pavillion S.3220.uk PC, using Windows Vista Edition Home Premium. I have problems with the audio video synchronization when using Windows Movie Maker, version 6.0, I 'get' raw AVCHD files to .wmv using voltaic HD. I've noticed that the audio and video are out of sync, ONLY after the first thumbnail. No indirect problem with videos, but when people talk to the camera, in case of DISASTER, as he is out of sync. I tried to reduce the resolution of 720 p and 540 p, and no solution to the problem. Any thoughts on the matter please?
Hi Fabian119,
Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.
There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player (for example, a file compressed with the DivX video codec or the Ogg Vorbis audio codec). Because the player is extensible, in many cases you can download the necessary codec on the web for free or for a fee.
You can visit the following links for more information on codecs:
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
You can also view the following link to download the audio file conversion programs and check if you can convert AVCHD to Mpeg.
Convert music, videos and photos from one format to another
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Problem with the evolution of the links when you save the model.
What I have:
Establishment of model in the "Templates" folder in the root of the site. In this model, there is such a link "... / pic/tran.jpg", and "... /.. '. "/ pic/tran.jpg.
When you create the new file based on the current model links the first kind to "pic/tran.jpg" transformations and second - "file:///Y|/home/3dsfera/pic/tran.jpg".
What I have to do? How to preserve the original links in file created on the basis of the model.If the links are correct in the model, based on where the model is
located, so they'll be correct in the pages of the child, anywhere
within the site save you. DW will manage these links for you.If you see the absolute link 'file' persist after the registration of the child.
It may be because of one of these.1 DW think that you linked to a page outside the local root
folder, or
2 DW think you have saved this page outside of the local root folderDid you one of the people?
--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
=================="firefoxer_d" wrote in message
News:g5vj0s$EBJ$1@forums. Macromedia.com...
> What I have:
> Creation of model in the "Templates" folder in the root of the site. In this model
> There is such a link "... / pic/tran.jpg", and "... /.. '. "/ pic/tran.jpg.
>
> When you create the new file based on the current model links of the first kind
> changes in 'pic/tran.jpg' and second-
> 'file:///Y|/home/3dsfera/pic/tran.jpg '.
>
> What I have to do? How to keep the original links in file created on the basis
> of
> model.
> -
Error: "no connection is available via USB" when you try to synchronize Palm Tungste E.
original title: problems with my Palm Tungste E and Windows XP
I have a Palm Tungsten E PDA. I can't synchronize Ho. The Palm shows that no connections are available via the USB port. Palm software only has a connection available in the Installer (Com 1) series. How can I cofigure system to allow me to Hotsync? Thank you very much.
Hello
Follow the steps in the following link and check if that helps.
http://KB.hpwebos.com/wps/portal/KB/common/article/2630_en.html
Also check the following link for more information.
http://KB.hpwebos.com/wps/portal/KB/common/article/8594_en.HTML#4
-
Original title: notice of work stop Windows
Hi JoeBuono,
Follow the steps below:
Method 1:
Start your computer in a clean boot state and see if that fixes the problem.
See How to solve a problem by performing a boot in Windows Vista or in Windows 7
Note: Do not disable any program startup list Kodak when you perform the clean boot.
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
Method 2:
Uninstall and reinstall the Kodak Home Center of your computer and see if that fixes the problem.
See also: troubleshooting install or uninstall programs
Method 3:
See:
Message: "AiO Home Center has stopped working" when editing and printing photos
-
What he says in the subject really
Sometimes, it works as it is supposed, sometimes it just freezes, and when you click on the window of the program I hear a winows: 'PLING', not the error, just the sound signal.
I have seen this time, but during the process of exporting rather than importing. PP called a window of dialogue Windows, but for some reason Windows is not open this window, and PP will not let you do anything until this window is closed. But since its opening ever, you cannot close it. The only thing you can do is to close PP by using the Task Manager and lose all the work that has not been saved.
I reinstalled Windows recently, and it has not happened since.
-
When you try to partition my hard drive, we get an error "parameter" unknown or invalid
I want to partition my hard drive of 200 GB to create a 30 GB partition to run Ubuntu. My OS is Windows XP Media Center Edition with Service Pack 3. I read online and loaded "Help and Support" and followed the instructions without success. When I try to use Windows to create the partition, I can't right click on the unallocated disk space to create a new partition. When I use the command prompt, it returns the message "unknown parameter or invalid" no matter what options I specify. Can you recommend a new approach?
I want to partition my hard drive of 200 GB to create a 30 GB partition to run Ubuntu. My OS is Windows XP Media Center Edition with Service Pack 3. I read online and loaded "Help and Support" and followed the instructions without success. When I try to use Windows to create the partition, I can't right click on the unallocated disk space to create a new partition. When I use the command prompt, it returns the message "unknown parameter or invalid" no matter what options I specify. Can you recommend a new approach?
Your question is not quite clear to me. Your reader should all unallocated space? Normally readers aren't.
Fear that there be any question of this as "unallocated" means, is the space that is not in any partition. It is * not * unused space in a partition.
If you don't have unallocated space, you will need a third party program to create another partition.
-
Plug-ins are updated. I can't understand what is wrong. He started from nothing and I have no other problems.
Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox 14 are probably caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.
To resolve this problem, follow the steps in these articles in the Knowledge Base:
Flash Plugin - maintain and troubleshoot
Adobe Flash plugin has crashed - avoid that it happen
11.3 Flash does not load video in Firefox
We'll find other information on more technical issues under these links:
http://forums.Adobe.com/thread/1018071?TSTART=0
http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html
Please tell us if it helped!
-
problems with the XML that is returned when you call a web service with CF11
Hi, I ran into an unusual behavior when calling web services.
I call a web service that returns an XML like this:
< children >
< child >
John < firstname > < / name >
DOE < name > < / lastname >
< / child >
< / children >
during the call to the web service of CF10, it works fine. However, when the CF11, I don't get this:
< child >
John < firstname > < / name >
DOE < name > < / lastname >
< / child >
no < child >? for some reason, CF11 ignores / hides the highest level XML. This does not happen on previous versions. Why? the server that hosts the web service's CF11 too.
Report it as a bug in Coldfusion. In any case, I recommend making sure your web service returns a string, not an XML object.
This is because a web service must be universal. Appellants to .NET, Java, PHP, ASP and so on, will interpret a chain exactly the same way. Whereas an object XML Coldfusion is a construction that is heard only in CFML.
Your return string should also start with the XML declaration, like this
John DOE So it is clear to the appellant in which brought the cat.
-
I have a new HP Omen 870-040na produces no w3d62eahabu and tries to use it to download my portable hard disk images in the images folder. However, I get an error message saying there is not enough space for the images that I copy. I'm not an expert in computers, but believed that this computer has 2 TB of storage. So why do I get a message like this?
Hey!
Thanks for getting back to me. I totally understand! The purchase of new products, get to know them, their customization and juggling with them can be a lot of fun, but sometimes it can be frustrating.
It seems that the folder C: / drive has been defined for much smaller files. Without being able to physically see, I guess that your operating system, Recovery Manager and other system files are stored on your drive 256 GB or C: / drive.
I suggest you use the 2 TB D: / drive to put all your photos and personal on such files that it is bigger and who may be appointed for you . Although it seems confusing, it is really a good thing!
I want to provide you with your OMEN of PC desktop HP - manuals and Guides for the use of 870-040na. This way if you want to learn more about your product, the option is there for you.
I hope this helps!
-
I'm trying to publish my site on BusinessCatalyst, but get a pop up message and muse stops. The error message says 'SiteFile.getCRC called with no content text or binary'.
No problem before, but I made a few changes of fonts, and now I can't download. I have updated to Air and uninstalled/reinstalled Muse. Not sure that the program or where to start.
Thanks for the help!
Could you please share your with us .muse file to study? Please send it to [email protected]. If your file is larger than 20 MB, you can use something like Adobe SendNow SendThisFile or Dropbox. Don't forget to mention the link to this forum thread in your email so that we can identify the file.
-
Windows security
I keep trying to access a Web page for the work and windows security continues to ask me to connect, but none of my work of names or passwords user why is this, and it is only this one page.also I do not use windows security.
Hello
I suggest you to follow these steps and check if that helps:
Method 1:
a. open Internet Explorer.
b. click on tools, Internet options Open.
c. click on the Security tab, select Internet and click Custom level.
d. scroll down to display mixed content, and click Activate.
e. click ok, apply, and then click ok.
Check if that helps.
Method 2:
I suggest to reset Internet Explorer and check to see if it helps:
http://Windows.Microsoft.com/en-us/Windows7/reset-Internet-Explorer-settingsFor more information, see these links:
http://Windows.Microsoft.com/en-us/Windows7/security-and-privacy-features-in-Internet-Explorer
http://Windows.Microsoft.com/en-us/Windows7/change-Internet-Explorer-security-settingsIt will be useful.
Maybe you are looking for
-
I got a 38mm watch Sport by Apple as a gift. I went to the Apple local store yesterday and asked to see the bands nylon. They showed me a tape that was Gold/Red in color with a gold buckle (my watch is aluminum gold). I wanted to buy this watch ba
-
WinXP on Satellite A210-131 - modem and installation of SM bus controller
Hi, I have a Toshiba Satellite A210 adapter - 131, which came with Windows Vista. I uninstalled and installed Win XP and SP2 and I have several problems in my device manager: I've got "Modem device on high definition audio bus" and "sm bus controller
-
Impossible to see personal hotspot in 6s
Dear Sir. I am unable to see in hotspot staff iphone 6s
-
HP pavilion g7 (said MU06 on battery)
I put a bios password on my laptop some time ago and don't remember. When I try to enter, after 3 attempts it says systemdisabled and gives me this number: 81923362 Please help me im stuck!
-
What language is my service pack I try to install the service pack 2 for xp home. I tried all the languages but it stil says wrong language