Vista update problems. It goes in a loop when you try to update.
Vista goes in a loop when you try to update. The loop is as follows: - control panel update windows for checking updates for windows updates-installnew update softwear-install now the user account control continue download and installation of updates = control of update windows for updates on your computer-check updates - so this loop repeat any help woul be received gratefully
Windows Update Forum:
It comes with Vista, upgrade install and activate Forum.
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
LaserJet P2035n goes into infinite loop when you print from Windows 7 64 bit
I installed the latest drivers from this site for Win7 64 bt and whenever I try to print on my laserJet P2035n on the network, it goes into a loop and sends the same print job again and again until I cacel work on my PC.
Anyone know why this is happening and how reolve it?
TIA,
Joe
According to HP tech who helped shed some light on this for me
for Windows 7 32 bit
for Windows 7 64-bit
Right-click on the file, choose Properties, and select the appropriate compatibility mode that corresponds to that specific folder that you downloaded.
HP technology has solved as fast it takes to install a printer successfully. I went and done it for the rest of the printer to the breast of our society and all the world works perfectly.
-
Original title: cannot use Windows Update to install Windows XP SP3
I have done a complete reinstallation of Windows XP Pro from the original disc and managed to update to SP2. However, when I tried to upgrade to SP3, I got an error that "the site has encountered a problem and cannot display the page. I tried all the suggested fixes that I can find.
During the last attempt, I discovered that several dll is missing. Here's the msxml6.dll, wups2.dll, c:\windows\system32\wucltux.dll and c:\windows\system32\wuwebv.dll. If they are critical, where can I find them, and how do I get support.
In addition, mshtml.dll is available, but the DllRegisterServer could not find an entry point. Is this critical?
In any case, I still can I install Microsoft Update or download/install SP3.
The computer is an IBM R50e laptop.
Thanks for any help you can give.
Try to run this tool to windows update. This will help to re-register the dll
After its done. try again and do the update
hope this helps
-
ShowWindow enter an infinite loop when you try to open a subfolder of a file system shell extension
Hi all,
I've implemented a file system shell extension. Everything works fine, but the next case: the user tries to open a subfolder of the extended file system (double clicking on its icon, for example), but an error is detected. When the ShowWindow is called to display the error message, the thread enters an infinite loop within the ShowWindow function.
It seems that the shell access mode when double click to open a subfolder which prohibits the display of new windows.
Have someone faced this situation? Can anyone give me a suggestion in order to investigate in the right direction?
I thank very you much.
Hello
I discovered the reason for the behavior represented: I created the message window as a child of the display window. At the opening of the subfolder view window becomes disabled, which also affect the child window. Definition of the parent to NULL window I solved the problem.
Paolo Righi
-
Force10 S4810P start endless loop when you try to start using TFTP
The image I have on the machine is damaged and will and therefore no longer starts. So I downloaded the image of the site of Force10 already on this device. (AFP - SE - 8.3.7.0.bin) and this is what I see.
-Online boot
The main line of seed starting...
ENET 100BT/FD from
Speed: 100, full-duplex
ETSEC3 device using
TFTP server 192.168.0.21; Our IP address is 192.168.0.23
File name ' OTF - SE - 8.3.7.0.bin'.
Load address: 0 x 6400000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
###########################################
fact
Bytes transferred = 22571135 (158687f in hexadecimal)
WARNING: setting the memory available for 30000000
# Boot the kernel of the Image of the legacy at 064000f0...
Image name: netbsd
Image type: the NetBSD's PowerPC kernel Image (gzip compressed)
Data size: 7416792 bytes = 7.1 MB
Load address: 00100040
Entry point: 00100040
Checksum checking... Ok
Image of the core decompression... Ok
CPLD: HW Watchdog disabled
# The control transfer of NetBSD stage charger 2 (address 00100040)...The core dump information is sent @ 0 x 84000
Copyright (c) 2005-2010 Force10 Networks, Inc. All rights reserved.
Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002
The NetBSD Foundation, Inc. All rights reserved.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The regents of the University of California. All rights reserved.Force10 Release 8.3.7.0
NetBSD 1.6.1 (S4810) #0: Thu Dec 16 11:56:36 PST 2010
Build@build-SJC-74: / work/build/buildSpaces/build19/E8-3-7/SW-NetBSD/usr/src/sys/arch/bacardi/compilation/S4810
Model: Freescale Semiconductor CDS
total memory = 2048 MB
to use memory = 1960 MB
using pads of 2000 containing 8000 KB of memory
boot device:
root on discharges md0a on md0b
inittodr: RTC absent - CHECK AND RESET THE DATE.
type of root file system: ffs
LD0 to sdmmc0: 8 GB MID: 0x61 OID: 0x4e4c S/N: 0xb411f3LD0: 4065 cyl, 64 heads, s 63, 8003 MB, 512 bytes/sect x 16390144 sectors
ignoring SIGQUIT SIGTSTP and SIGINFOSeizure of Jumpstart app:
The initialization of the runtime directories
JumpStart: initialization of the network is located in the boot line
Add a 192.168.0.23 host: gateway 127.0.0.1
Add net 192.168.0.23: gateway 192.168.0.23
Add net 0.0.0.0: gateway 192.168.0.1: network is unreachable
TFTP 192.168.0.21
binary mode
get the OTF - SE - 8.3.7.0.bin /force10/rd/tgtimg/FTOS-SE-8.3.7.0.bin
TFTP: sendto: cannot assign requested address
TFTP > tftp > tftp > boot Cp: ExtractReleaseHdr failed: err = 0
start-up of CP: CheckReleaseImage: ExtractReleaseHdr failed
TFTP 192.168.0.21
binary mode
get the OTF - SE - 8.3.7.0.bin /force10/rd/tgtimg/FTOS-SE-8.3.7.0.bin
TFTP: sendto: cannot assign requested address
TFTP > tftp > tftp > boot Cp: ExtractReleaseHdr failed: err = 9
start-up of CP: CheckReleaseImage: ExtractReleaseHdr failed
TFTP 192.168.0.21
binary mode
get the OTF - SE - 8.3.7.0.bin /force10/rd/tgtimg/FTOS-SE-8.3.7.0.bin
TFTP: sendto: cannot assign requested address
TFTP > tftp > tftp > boot Cp: ExtractReleaseHdr failed: err = 9
start-up of CP: CheckReleaseImage: ExtractReleaseHdr failed
synchronization of disks... done
reset---------------------------------------------------------------------------------------------
That's how I env boot. installation program.
-Online printenv
BootDelay = 5
BaudRate = 9600
loads_echo = 1
eth1addr = 00:E0:0 C: 02: 01:FD
eth2addr = 00:E0:0 C: 02: 02:FD
eth3addr = 00:E0:0 C: 02: 03:FD
pre-launch = mii write 0 x 1 0x1c 0xfcad; Mii write 0 x 1 0 x 00 0 x 0140; Mii write 0 x 1 0x1c 0xfcac; Mii write 0 x 1 0x1c 0xb4ef;
RootPath = / opt/nfsroot
host name = unknown
LoadAddr = 6400000
uboot_filesize = 0 x 80000
tftpflash = tftpboot $loadaddr $uboot; protect the 0xfff80000 + $uboot_filesize; erase the 0xfff80000 + $uboot_filesize; CP.b $loadaddr 0xfff80000 $uboot_filesize. protect on 0xfff80000 + $uboot_filesize; CMP.b $loadaddr 0xfff80000 $uboot_filesize
ethact = eTSEC3
ethaddr = 00:01:E8:8 B: 13:8 D
mgmtautoneg = true
mgmtspeed100 = true
mgmtfullduplex = true
uboot = u - boot.bin
158687F = file size
fileaddr = 6400000
gatewayip = 192.168.0.1
IPAddr = 192.168.0.23
ServerIP = 192.168.0.21
secondary_boot = f10boot tftp://192.168.0.21/FTOS-SE-8.3.7.0.bin
primary_boot = f10boot tftp://192.168.0.21/FTOS-SE-8.3.7.0.bin
default_boot = f10boot tftp://192.168.0.21/FTOS-SE-8.3.7.0.bin
stdin = series
stdout = series
stderr = series
bootcmd = echo Booting main line boot...; $primary_boot start; echo Failed; echo Booting secondary line of boot...; $secondary_boot start; echo Failed; echo Booting default line boot...; $default_boot start; echo Failed; echo restarting...; resetThe environment size: 1218/8188 bytes
=>I do not have a guarantee of current on this unit, any help would be most appreciated. If more information is needed please let me know and I will it get to you.
OK, I was able to get the unit to start all the way using the image that is on the flash. I had to remove the startup for the gateway, the system and the tftp server configuration information. Once I did the unit booted all the way. Now to upgrade this thing.
-
Problem with Dell inspiron 15r graphics when you try to play Pro 2013
Hello! I bought Dell inspiron 15r (i5.12GRam.1TGB) with Intel HD 4000.
When I tried to play pro 2013 I get a message saying that my card is not compatible, because it is 64 MB.
What can I do?
Hi simosmme,
Dell Inspiron 15R is supplied with technology switchable graphics in which you cannot disable the integrated video card and use only the discreet graphics card. The two video cards work in tandem.
Please follow the steps mentioned below to select the PRO 2013 application and assign the discrete graphics processing unit.
- Click on the Start button and select programs
- Click Catalyst Control Center
- Power , click on select switchable graphics
- Choose an application from the list or browse and select an application and set the discrete GPU.
Please let me know if it helps.
-
Windows Movie Maker 6.0 Vista immediately stops working when you try to open.
Hello!
I've been all around the internet trying to solve this problem, but nothing has worked so far. When I try to start Windows Movie Maker 6.0 for Vista, (in general), it stops working at their opening saying the following:
"Windows Movie Maker has stopped working".
There has been a few times when it actually opens and I can work on my videos, however, it's very, very, rare and seems to happen randomly.
I tried to open in safe mode, but it still fails to open. I also tried to open .avi short and simple with WMM 6.0 files to see if it will be open, but that, generally, does not either.
Once, I was able to open random and I have disabled all the filters on the Compatibility tab and temporarily activated only video filters that I needed. That seemed to fix the problem for several days, and I could open Movie Maker 6.0 several times. Sometimes it would freeze everything and save, or stop working when importing video files, but at least it would be open. I was able to record some videos. After a few days, my computer day and WMM 6.0 is more open more. I don't know if yes or no update is the reason why Movie Maker 6.0 started crashing again, but it was the only thing that has changed on my computer while I could uncheck the Compatibility tab filters and open WMM 6.0. [Could uncheck all filters to be part of the problem?]
I usually works with .mov files, and I read on how this type of file sometimes causes problems with Windows Movie Maker. However, the problem normally occurs when I try to open the program (and if WMM opens, I can very well change .mov files). I do not think that the file type is causing the crash, but I guess that's always a possibility...
I also read that sometimes Windows Movie Maker 6.0 for vista doesn't work with all computers that have vista installed, and Windows Movie Maker 2.6 must be used to place. Windows Movie Maker 2.6 is working fine on my computer, but it cannot change the .mov files, or record in HD. I had horribly degrading the quality of the video with the conversions of files to use WMM 2.6. Windows Movie Maker 6.0 is much better, on the rare occasions that it works. Do you think I should use Windows Movie Maker 2.6 now?
Here are two problem reports that appear more often when you try to open Windows Movie maker 6.0. The window of support almost always said I need to update my computer again (even if there is no new update), or that it is a problem of security Data Execution Prevention. Windows Movie Maker cannot be added to the list of exceptions to Data Execution Prevention, or I can check to see if the filters from the Compatibility tab are always disabled in the program, I don't know how to solve this problem...
-----------------------------------------------------------------
Signature of the problem
Problem event name: BEX
Application name: MOVIEMK.exe
Application version: 6.0.6001.18341
Application timestamp: 4ad5c77d
Fault Module name: StackHash_6f96
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 0378415b
Exception code: c0000005
Exception data: 00000008
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Additional information 1: 6f96
More information 2: 39ee662180b2f2ed5cfc67e5914ae855
Information additional 3:6366
Additional information 4: 8328a225406b340b1b7b5f591aa5688cAdditional information about the problem
Bucket ID: 1197617492-----------------------------------------------------------------
Signature of the problem
Problem event name: APPCRASH
Application name: MOVIEMK.exe
Application version: 6.0.6001.18341
Application timestamp: 4ad5c77d
Fault Module name: StackHash_1703
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception code: c0000005
Exception offset: 032e41a4
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 1033
Information additional 1:1703
More information 2: 2264db07e74365624c50317d7b856ae9
Information additional 3:1344
Additional information 4: 875fa2ef9d2bdca96466e8af55d1ae6eAdditional information about the problem
Bucket ID: 1909412930-----------------------------------------------------------------
The "BEX" error happens much more frequently than the "APPCRASH" error In addition, I have Windows Vista home premium installed and a 32-bit operating system. I don't know how to read the problem reports, or if it's all the information you need. I'm not very good with computers at all the... Any help and ideas would be greatly appreciated!
Thank you!
Very often, but not always, Code exception: c0000005 is a permissions access error, so have you tried right-clicking on the MM shortcut or .exe and selecting the option "Run As Administrator"? Other times a reinstallation of the program crash can fix. As you can not do with Movie Maker the next best option is to try the System File Checker.
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212/#appliesToHave you tested another user even if you need to create one to do this?
Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking. Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive. If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.
See how many unsigned drivers, you have running on your computer. This article will guide you on the instructions, but all you need to do is type sigverif in start run.
How to identify unsigned with sigverif utility in Windows Vista drivers
http://www.WinVistaClub.com/F34.htmlVista Movie Maker DEP Fix
http://www.YouTube.com/watch?v=tkpURM4FFt0In the fix above which is sometimes, but not always with success, it is suggested to leave it on the AVI decompressor.
There are a few suggestions that Nero is a problem if you run that at all?
Windows Movie Maker has stopped working
http://blog.SteveX.NET/2006/11/Windows-Movie-Maker-has-stopped-working/If a piece of software can crash Movie Maker may be other software can do, then try Movie Maker in a clean environment, without other software running.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135 -
Get the error 800b0100 code when you try to update KB2412687
original title:
Windows is not updated: O
I tried to install update KB2412687 several times without success. I followed a few solutions to the problem, so I used the program of preparation, but it still will not be installed after the application of this program.
Error code is 800b0100
Please can someone help?
Thank you
LISA M78
Hello
Perform the steps in the article, and check if the problem persists.
Hope that helps.
-
The problem I have is listed on the feald above, but there are once more my question: blue screen "stop0x0000003E" error when you try to install the service pack of windows vista (R) 2.
Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Nobody knows... including Adobe why Photoshop crashes when you try to print. I had Adobe take on my computer, they put it is good, and then as soon as I download an update off he goes again. ADOBE when are you going to fix this problem it is we makes everyone crazy.
I'm willing to take to social media, this problem will just on and so forth. Someone has found a permanent solution, if so can you let me know the answer.
Hey Abram,
What version of Photoshop are you using?
What operating system do you use?
~ UL
-
After reinstalling Vista, when you try to do Windows updates get error 80073712
Initial problem was unable to update windows. Reinstall Windows Vista. Now meet 80073712 error.
Is there a reason why you don't have not advised SP level you use, etc.?
http://support.Microsoft.com/kb/555375 >
There is a tool that will try to fix the inconsistent to the component store but, State if the system has malware resident, then it may not work properly.
A general solution, *IF* is no malware problem, would be to run the system update tool.(When was the last time you checked your system for malicious programs?)
The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update error 80073712 error code.
http://Windows.Microsoft.com/en-us/Windows7/what-is-the-system-update-readiness-tool>
Read this:
Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".
http://support.Microsoft.com/kb/957310>
NOTE: Before going through the steps provided for in article KB957310, I suggest you you to reset windows component update and check if you can install the updates.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058>
UTC/GMT is 12:26 Tuesday, June 12, 2012
-
I get 0 x 80070246 errors when you try to install SP1 for Vista Home Premium.
After you run the system update readiness tool, I found the following errors in my CheckSUR.log
=======================================================
Preparation of control system was updated.
Binary version 6.0.6002.22202
Package Version 6.0
2009-10-09 19:13Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
Control components store
(f) clear CSI missing 0x00000002 WinSxS\Manifests\x86_microsoft-windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest x86_microsoft-windows - msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en - us_37881fc949e23021
(f) CSI Payload file missing 0 x 00000000 jscript.dll x86_microsoft-windows-writing of scripts - jscript_31bf3856ad364e35_6.0.6002.22146_none_852abf080d834b3eSummary:
Seconds executed: 1221
Found 2 errors
CSI shows lack Total count: 1
CSI Payload file lack Total count: 1Unavailable repair files:
winsxs\manifests\x86_microsoft-Windows-msxml30.resources_31bf3856ad364e35_6.0.6000.16386_en-us_37881fc949e23021.manifest=======================================================
The newspaper CBS.log itself has several types of mistakes, too. Here are some samples:
-Errors 'M²;
2009-10-09 21:10:27, info CBS SPI: from SPInstall
2009-10-09 21:10:27, info CBS SPI: could not start the etl newspaper. Continue without. HR: 0 x 80070020
2009-10-09 21:10:27, info CBS SPI: wave 0 detected
2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
2009-10-09 21:10:27, info CBS SPI: spent before due diligence
2009-10-09 21:10:27, info CBS SPI: wave 0 installation. Subset of LPs taken in charge.
2009-10-09 21:10:27, info CBS SPI: M² is not included in
2009-10-09 21:10:27, error CBS could not initialize wrapper M²
2009-10-09 21:10:27, error CBS could not define M² by default LCID of the system value-"Could not find the CixTarget Molok" errors.
2009-10-09 21:29:25, CBS Plan info: package: Package_6_for_KB954366 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3, updated: 954366-50_neutral_GDR, current: installed, pending: the default start: installed, planned: installed, targeted: installed, limit: installed, selected: default
2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_server ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109
2009-10-09 21:29:25, error could not find the CixTarget for container package_for_kb954366_sc ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.3.cat
2009-10-09 21:29:25, DpxException hr = 0 x code 80070002 error = 0 x 020109-"ILLEGAL_CHARACTER" and more "Sqm" errors-
2009-10-09 21:30:04, error CSI 00000022@2009/10/10:01:30:04.150 (F) d:\longhorn\base\lstring\lblob.cpp(2217): native STATUS_ILLEGAL_CHARACTER error of the function RtlTranscodeLBlobs expression: __rv. UcsCharacter! = (0xffffffff)
[gle = 0 x 80004005]
2009-10-09 21:30:21, error CSI 00000023 (F) HRESULT_FROM_WIN32 (582) #489176 # to Windows::ServicingAPI:CCSITransactionAnalysis_ICSIInventory:EnumDeploymentReferences(flags_=_00000003,_tlcid_=_@0x655fac0,_pszSubscription_=_(null), pszCodebase = (null))
[gle = 0 x 80070246]
2009-10-09 21:30:21, CBS WER info: generate report of failure for the package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, status: 0 x 80070246, source of failure: other CBS, start state: 0, target State: 4
2009-10-09 21:30:26, information CBS Exec: comprehensive treatment. Session: 30034248:1278646622, package: VistaSP1-KB936330 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.0.18000, hr: 0 x 80070246
2009-10-09 21:30:26, State of the information system sleep restored CBS block: 0x80000000
2009-10-09 21:30:26, CBS Session information: 30034248:1278646622 finalized. Reboot required: no
2009-10-09 21:31:30, CBS briefing: initialized 30034249:1690541326.
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:30, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, error CBS SPI: cannot write SQM data flow for the package status
2009-10-09 21:31:31, CBS Session info: 30034249:1690541326 finalized. Reboot required: no
2009-10-09 21:31:31, error CBS doesn't have value of M² for the time of the scene
2009-10-09 21:31:31, error CBS doesn't have the m value for the build number
2009-10-09 21:31:38, CBS Session info: 30034249:748895326 finalized. Reboot required: no
2009-10-09 21:31:41, info CBS SPI: cannot install MS using the user interface. HR 0 x 80070246
2009-10-09 21:31:41, info CBS SPI: SPInstall terminating, return code 0 x 246
2009-10-09 21:31:41, error CBS didn't M² value for parameters
2009-10-09 21:31:41, error CBS failed to set exit code value M²
2009-10-09 21:31:41, error CBS didn't M² for the SKU value
2009-10-09 21:31:41, error CBS doesn't have the m value for the build number------------------------------------------------
I don't understand exactly how errors in the two newspapers are related, but my opinion is that, if I can solve my CheckSUR.log errors, CBS.log errors will disappear to, and then I might even be able to install SP1.
Any help that can be provided would be greatly appreciated.
1 person needs an answer
For what is interesting, what I ended up doing to solve my problems was to re - install Vista with the 'upgrade' option, so I don't lose any of my files or desktop settings...
After that, I had a few problems with my OS reinstalled with several (80 +) updates, SP1 and SP2 from catching up. But overall these problems were minor compared to it, that I lived just to fix some missing files.
-
80073701 error code when you try to install KB2378111 update on Windows Vista
When you try to install the update KB237811 on Vista 32-bit, I said it has installed successfully, but I have to restart my computer. After the reboot, I get a message that the installation has NOT been successful. I tried to install this update three times, and I still get the same error code: 80073701.
See the section "How to get help" of http://support.microsoft.com/kb/2378111
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
Or you can...
Start a free Windows Update support incident email request:
https://support.Microsoft.com/OAS/default.aspx?Gprid=6527
Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/
For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx
For enterprise customers, support for security updates is available through your usual support contacts.
-
I have error code 8024200d when you try to update and install SP1 for Vista
I have error code 8024200d when you try to update and install SP1 for Vista. I'm currently running Vista Ultimate. Any help would be appreciated.
Thank you! Matt
Matt,
The 8024200d result code indicates WU_E_UH_NEEDANOTHERDOWNLOAD
Update Manager did not install the update because it must be downloaded again.
Suggest you download and Save the complete stand-alone package of Vista SP1.Links to the standalone versions are on this page because you validate that the edition of Vista is x 86 (32-bit) or x 64 (64-bit). You can see the architecture of the system of opening in the Panel and next to the search System system type: Windows Vista Service Pack 1 (SP1)
Before attempting to apply the SP1 please consider this information-
If you choose to install Windows Vista SP1 via the standalone installer available on the Microsoft Download Center, Microsoft recommends that you first check Windows Update and install all drivers in option. Read the Articles in the Knowledge Base 948187 and 948343 for more information.
Suggest you to create a folder on the root drive (the drive where Windows is installed, usually C:\) and name SP1.
Move the downloaded Service Pack in the newly created folder.
Disconnect all the devices, printer, external USB hard drive, etc.Then, Configure the system starts in a clean condition
After you restart the worm as a clean boot, apply SP1.If there is still a problem with the installation of SP1, MS offer support chat and free e-mail to "help you to download and install service packs" here-
Microsoft technical supportOr, you can post here - MowGreen Windows Vista Service Packs/Windows Server 2008 Service Packs Windows IT Pro - consumer safety Expert
-
I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.
error 8007090
I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem
Hello
Are you sure this is the error Code?
And not this one?
It is the opinion of Microsoft about the error code 80070490.
'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'
http://support.Microsoft.com/kb/958044
Method 1: run (Checksur.exe) system update readiness tool
- Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.
For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821
(http://support.microsoft.com/kb/947821/)Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2
- Try to install updates again.
Method 2: perform a Windows repair installation
If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.
If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.
"This has occurred as soon as I updated from Windows XP"
You have the upgrade DVD?
Here is a tutorial on how to do it:
"How to perform a repair for Vista Installation"
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html
See you soon.
- Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.
Maybe you are looking for
-
It's great that Pages offers the possibility to export to EPUB. But what version of the EPUB standard? EPUB 3 differs significantly from 2 EPUB in its ' underlying structure and capacity. Also, anyone know if the iOS version of Pages exports to the
-
Diffence between firefox functionality on xp and windows 7
I just want to know the difference between the feature and the dependence on the two bones. and y at - it any thing change setting of Firefox on windows xp or 7 l.
-
IWish if the web site that I opened is a site trusted or not
When I clicked on a link in my email, a web page was opened and told them to send me an I Phone and for this purpose they asked me to register on their site with all my personal details entered in the required field. What will happen if I do this. Ad
-
EL AJEDREZ THAN VIENE EN MI COMPUTADORA JUEGO ARE A REAL FRAUD
CUANDO YO ESTOY POR GANAR EL JUGO, USUALLY SE BLOQUEA IN EMPAE Y CUANDO EL SISTEMA DEL JUEGO ESTA POR PERDER SE BEING EL JUEGO, RESPOND SUÊTE PARA THE POXIMA Y ESTE JUEGO NO ASI WORKS ARE TIEMPOY DESTREZA, EL PROGRAMA O ORIGINAL, TIENEN UNA FALLA INS
-
Windows xp, play pc games but the driver is to small
I have windows xp 2002 with radeon driver 16 mb.wont let me play all the games, how can I upgrade for free