Problem with the development of stacking

Similar Questions

• Problem with the Toshiba bluetooth stack

  Hello, I'm having a problem with toshiba bluetooth stack. I had windows vista installed in my laptop. I decided to upgrade to Windows 7. I got a bluetooth mouse attached to my toshiba bluetooth stack in windows vista. After the upgrade to windows 7 my bluetooth mouse is not working any more and it is not listed in the list of devices. But, when I turn on my mouse, the system battery bluetooth bar turns green as when the device is connected, but it does not work and the device is still not listed. I'm trying to redetect, but it is not detected. I tried to uninstall and reinstall the bluetooth stack, but in the reinstalling my devices are always listed.

  Can someone help me or tell me how to manually remove all connected devices? Thanks in advance.

  You have selected the option to remove all device configurations?
  If not, then please try it and then reinstall the Bluetooth stack.
  You can also do this via command line.
  Just run the following command as an administrator:
  MsiExec.exe /x "{CEBB6BFB-D708-4F99-A633-BC2600E01EF6}" / qn DELETEALL = 1

  In addition, remove the batteries from the mouse for several seconds.

  Right click on the Bluetooth system tray icon > Options... > Security > view paired devices
  Remove your entry for the mouse device when it exists.

• Problems with the developer of the Disqualification VM

  We want to assess a few characteristics of the Disqualification, so the developer provided by Oracle VM for 12.1.3 was downloaded and imported in Virtual Box and configured by the installation guide for VM to Oracle for the Disqualification.  He promises (I guess you are aware) a ready-to-go, essentially free installation, vm where some exercises based on a Disqualification can be worked, etc.

  It will not work.  We are not an Oracle shop in a perspective of DB, aren't we a store of Linux so there is not a lot of expertise to try to solve the problems with what is supposed to be a good install.

  Essentially, the WebLogic administration server fails to start and the Disqualification app server does not start.

  Don't want to take much time at all, but I'm just curious, if there are a few known issues with this VM developer who are documented somewhere and resolution so that we can get things facing up and running without having to learn about weblogic, etc at this stage.

  Thanks in advance.

  There there was no problems known with this, other than to ensure that you have sufficient resources to run it. A machine at least 16 GB of RAM is preferred.

  An alternative to evaluation purposes would be the quick start installation for windows you will find on the page of the OTN Disqualification.

  Download page for Oracle Enterprise Data Quality

• Problem with the development of photos

  Hello together,

  I am new here to this forum and I hope that threre is someone who can help me with my problem (hopefully easy):

  As soon as I move from "organize photos" to "develop the photos" there are a few strage colors (not sure how to explain it better in English). It happes with each photo without doing anything else that switching between the two views. So I would like to know the problem behind this failure of whtat.

  Organizing photos:

  

  Developing his photos:

  

  Thanks for your help!

  ARO

  Erik

  The color red is an indicator of clipped highlights. Clipped shadows are shown in blue.

  Press J on the keyboard to activate / disable these indicators.

  You can also click on the small triangles in the upper corners left and right of the histogram.

• ? the problem with the "Develop" mode

  Downloaded Lightroom (cloud Creative) to the new computer.  Photos very well in library view but do not appear mode develop.  Empty deep blue screen only.  How can I fix.  Cannot change.

  Hi delberth,

  Go to the Lightroom preferences > performance > uncheck 'use graphics processor' and then check.

  Kind regards

  Claes

• I have a problem with the develop module. The image does not appear in the 'After' window. I can't see the changes and do my job. Maybe it's a bug?

  

  Lightroom CC - blue box in develop module

• The procedure of procurement of the game Clash of Clans first two payments $9.99 $4.44 and the second did not gems continued with the developer of the game and they told me to resolve this ongoing problem with Apple's iTunes... help me solve

  The procedure of procurement of the game Clash of Clans first two payments $9.99 $4.44 and the second did not gems continued with the developer of the game and they told me to solve this problem continue with Apple iTunes... help solve me this problem and the compensatory jewelry

  Double-see your message, my first response to this topic tells you how to contact iTunes Support (we are fellow users): Re: the procurement process of the Clash game Clans the amount was deducted from the iTunes account and do not have t...

• Problem with the BlackBerry Developer Site

  We are currently experiencing a problem with the integration of BlackBerry ID with the BlackBerry Developer web site.  This prevents the developers to create a new BlackBerry ID Token, connecting Issue Tracker and Developer area and potentially other areas that require authentication.  Trying to access one of these pages gives the following error.

  Sorry, there is a problem with the page you are trying to reach and it cannot be displayed. Please try again later.
  

  Teams are trying to solve the problem.  We apologize for the inconvenience.

  The problem has been resolved.  You should now be able to connect Issue Tracker and generate BlackBerry ID chips again.

• Is anyone having problems with the last lR? I can't do to apply effects to develop at all. I have to force to leave whenever I try to use it.

  Is anyone having problems with the last LR?

  I can't do the effects to apply to develop and I have to force to leave whenever I try to use it.

  I have absolutely nothing accomplished recently - it has worked so well.

  I created enough space on my hard drive thinking that this might be a cause of slow operation but he has not made the difference...

  Hi GKVsiuals,

  suggest make you in Lightroom preferences > performance > uncheck 'use graphics processor' and restart Lightroom to check again.

• Having problems with SQL Developer connection to the database on a LINUX machine

  Having problems with SQL Developer connection to the database on a LINUX machine
  Hello
  I am trying to connect my machine to windows 7 Home premium to an oracle database 11 g on RedHat 5 machine using SQL Developer. I got this error on SQL Developer
  Status: Failed - Test has failed: the network adapter could not establish the connection
  
  
  on Linux
  

  LSNRCTL> status
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
  Start Date                03-APR-2013 16:13:13
  Uptime                    7 days 22 hr. 16 min. 41 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
  Listener Log File         /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log
  Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521)))
  Services Summary...
  Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "orc11g" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11gXDB" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11g_XPT" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  The command completed successfully
  LSNRCTL>

  and TNSPING
  

  tnsping 172.x.x.x
  
  TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17
  
  Copyright (c) 1997, 2005, Oracle.  All rights reserved.
  
  Used parameter files:
  /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  
  Used EZCONNECT adapter to resolve the alias
  Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521)))
  OK (0 msec)
  [oracle@ltebilling ~]$

  Tnsnames.ora on Linux,
  

  ORC11G =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orc11g)
  )
  )

  Listner on Linux,
  

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
  (PROGRAM = extproc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  )
  )

  hosts/ect/Linux,
  

  # Do not remove the following line, or various programs
  # that require network functionality will fail.
  127.0.0.1               localhost.localdomain localhost
  172.x.x.x             LTEBilling

  and there is no problem to ping linux from windows
  
  Published by: user11309581 on April 11, 2013 15:16

  user11309581 wrote:
  as I have already desciped earlier, I can't connect to the server throw Linux my Windows SQL Server, with error message below.
  tatus: failed - Test has failed: the network adapter could not establish the connection

  It's too generic to mean anything. The application is hidden the real error message. You got when you did the tnsping and obtained "TNS-12535: TNS:operation has expired. Now THAT's an error.

  This indicates a problem firewall and routing. You said earlier you could ping the server, but now we see tnsping fails. Two different protocols of usage, so that both the successful ping turns out a valid physical path, it guarantees not that all traffic will pass. What happens with

  c:\ telnet 172.x.x.x 1521
  

• How to change the settings of the BT COM port with the Toshiba BT stack?

  I have a Tecra S11 with Windows7 64 bit and I need to connect via Bluetooth to a remote the BT series device. I want to use the BT interface on board.

  The BT remote appliance 38400,8, N-2 (stop to the most common place 1 2 bits). Problem: I find nowhere to change local BT Com port settings.

  The physical port HW parameters can be changed. See:
  HW COM1 with the port settings: http://i42.tinypic.com/epg5qr.jpg

  But I don't get the same tab for the port of BT:
  BT COM40 without port settings: http://i40.tinypic.com/24mcduw.jpg

  Not even the BACK order 'mode' allows me to modify the ports of BT

  Curiously, if I have the COM40 to a virtual machine on the same S11-tunnel (virtualbox), the machine virtual XP * can * change settings and communicate correctly with the remote device. How is that?

  Can _How Yes, I change the port COM BT with the Toshiba BT stack settings? _ my version is 8.00.12 (T), which should be the most recent available. I also updated the BIOS.

  Thank you
  Paolo

  Additional details.

  I tried to run the application as Administrator: still does not work.

  I crossed Win registry with regedit and gave all permissions to all users: still does not work.

  With the registry editor, I forced the port in 38400,8, N, 2 in 'HKEY_LOCAL_MACHINE NT\CurrentVersion\Ports': still does not work.

  Note that not only the application target complains, but also does not work the PuTTY used as a terminal series.

  The Toshiba BT application see the remote device were undetermined, serial port, Dev.B. No provider.

  I'm lost and stuck. Advice greatly appreciated.
  Paolo

• Problem with the D-U-N-S: Urgent

  I am trying to register my organization on an Apple Developer program.

  I got a valid D-U-N-S number sent to me by D & B on 2 February 2016.

  However until now whenever I try to register my business using the D-U-N-S number, I get the following error message:

  «The information you entered does not match your profile in the D & B database.» "Before submitting your information to the Organization, get your D & B profile."

  I watched and the profile exists.

  I sent a query to D & B, but we were told to contact Apple directly.

  We have created a deal on the Apple Support and we ardently and desperately waiting for a response.

  Someone from the community can help me on this issue. Please consider as urgent.

  Hello Nabla_business,

  Desperate? You should be aware that Apple is moving at glacial speed on these issues. On the one hand your number DUNS has been created. You must wait 60 days before attempting to create an account. However, it seems that your information has been through to Apple. You will have to wait for the Apple support to constct you. You may need to make repeated through several channels attempts to attract the attention of Apple.

  I had a similar experience. The problem was that when Apple imported data from Dun & Bradstreet, they completely scrambled my address. But I had no problems creating my account so your questions can be worse.

  And I would warn your words "emergency". Apple has a huge backlog of similar problems. In my case, the only way was able to get my problem resolved was when a Technical Support engineer used Apple Remote to go into my machine and then look at the developers own Apple Site. But I had this problem to be solved. I had many other problems with the tax forms.

  My point is that it can take up to a year, in order to get your developer account fully Setup. I suggest you open an account, personal development and test purposes. Be sure to use IDS bundle dedicated to this purpose. This way, when your business is finally set up, then you will be ready to go and become familiar with the process.

• Problem with the mode standby in Windows 7

  Hello friends,

  I have a big problem when Windows 7 updated itself. I have a laptop Toshiba Satellite L505D. When I close the lid, it will automatically 'sleep' mode. Unfortunately, the screen is black and the laptop is still in progress, I have to stop it and then turn. Is it a problem with the driver 'stack '? Please, help me :)

  >.. After Windows 7 update itself
  How to understand this?
  Have you installed the Windows updates or what?

  Have you tried to restore the OS using System Restore tool and check if the problem persists?

• Problem with the module "Automation" in WindowsAzure

  Top: Problems with the module used "Automation" service "WindowsAzure.

  Hello!

  I really need your help to decide my problem of "Azure Automation". My boss has set a task for the 'Automation' module allows you to make a backup of Virtual Machines.

  To understand my problem, I do the next:

  1. describe the situation of all;

  2. describe the problems that appear in this situation;

  3. my conclusions.

  In addition, I am attaching the necessary information: my PS-scripts (from Windows and the automation of azure), log (with my notes) and screenshots (images with my notes) see file .rar Add_info (annex).

  1 description any situation

  For our development projects, we have several Virtual Machines on service cloud "WindowsAzure. We need to make backups of discs with Virtual Machines each week. Earlier, for this task, I used Windows PowerShell on my computer and my PS-script (see Ann 0 - VM (backup) of the WPS_snapshot). I created a new storage 'backupstor' and containing 'snaps-drive '. When I run PS-script with my computer, I have backup of disks virtual Machin in the container "snaps-disk", without problem.

  Now I have a new task "automatically make the process of creating backup of Virtual Machines (VM snapshots). I tried to use automation module (overview). Can I change my PS script for the 'Automation' module and create folders (see Ann 1 - records (make backups of virtual machines) _Azure_Automation).

  I need to make a backup of Virtual Machine 'bosard' in the cloud 'cloudnet. "Bosard" on the disc size ~ approximately 90 000 000 000 bytes (total size of the default drive size 127 GB/136 367 309 312 bytes)

  2. description of the problems that appear in this situation

  My steps:

  1. I start files to make a backup of Virtual Machine disk (see annex 1 - files (make backups of virtual machines) _Azure_Automation))

  2. it starts successfully and generate the name of backup 1 (blob) - snapshot-bosard - osdisk_07.10.2014_07h00m39s.vhd (see image 1 - start copy backup 1 and annex 2 - log file copy process)

  3. the process of backup copy 1 (blob) will...

  Problem 1:

  4. the process of backup copy 1 (see Appendix 2 - process log file copy) automatically stops and complete to copy the part 1/3 bytes copied 28311552000only. Important: The size of my virtual machine disk ~ on 90 000 000 000 bytes.  (Maximum possible) of total capacity of the disk where the Virtual Machine is used - 136 367 309 312 (127 GB). (See picture 2 - stop backup copy 1)

  5. I have Virtual size 1 backup - 28311552000bytes, when the size of my VM - 90 000 000 000 / 136 367 309 312 bytes.

  Problem 2:

  6. after the termination of the process automatically makes copy backup 1, records (see annex 1 - files (make backups of virtual machines) _Azure_Automation) automatically start (see picture 2 - stop backup copy 1) and folders automatically create new snapshot Backup 2 - name - bosard - osdisk_07.10.2014_07h31m33s.vhd (see annex 2 - process log file copy, image 3 - stop the copy backup 1 & Begin copy backup 2 and 5 - backupStore_Azure (process)of image)

  7. I pressed "stop" and stopped the process of copy and folders (picture 4 - I stopped the process of creating backup 2 & records). And how result I had size Backup 1 and 2 = 0 bytes (see image 6 - backupStore_Azure (I order records))

  Note:

  1 problem 1: the process of backup of virtual machine does not complete and stops automatically.

  2 problem 2: the process of creating new second backup starts automatically. And as a result, we do not have the backup of virtual machine, when I use the 'Automation '.

  3. my conclusions

  I think that:

  1. my PS script for Automation (files) is not correctly. Then I need your help, how to fix this.

  2 may be the module "Automation" is not working correctly. And the module 'Automation' needs repairs and settings.

  In addition, I am attaching the necessary information (see the Add_info (annex) .rar file):

  Ann WPS_snapshot 0 - VM (backup)

  Ann 1 - records (make backups of virtual machines) _Azure_Automation

  Ann 2 - log file copy process

  image 1 - start the copy backup 1

  image 2 - stop copy backup 1

  image 3 - stop copy backup 1 & Begin copy backup 2

  4. I stopped the image create backup processes 2 & records

  image 5 - backupStore_Azure (process)

  image 6 - backupStore_Azure (I order records)

  Thank you

  Kind regards

  Mikhail

  Hello

  You can get the assisted support from the following link on this point:.

  http://azure.Microsoft.com/en-us/support/options/

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF