Problem with the display of the pages - formatting appears not.

Similar Questions

• Problems with the pages of models CS3

  My site is www.cft-aft.org and I have problems with a page or two that were created from a master template that the images are not loading or projection. An example can be found at http://http :// www.cft-aft.org/Get%20Involved.html. I don't know what the problem is or how to diagnose.  All pages of this website have been created from the master template. I had some file management problems in the past, and I think I have corrected most of them (with the exception of the change of name without spaces). I understand that this could be a problem and if it is my problem with this specific page, I understand.

  I have attached a few screenshots of the presentation of dreamweaver and a screenshot of my side of local and remote sites.

  The main problem with the page get involved is not editable images do not exist. Everything lies in the local root folder of the site/htdocs, on both sides. I noticed that when I do to the top of the page get involved in DW is at the top right of the screen, he reads a long path (shown as an example on the screenshot) and on other pages which load correctly, the path is not the same thing, but they reside in the same folder. I suspect that this is probably my problem, but I'm confused, how it got like that and worse still, how fix without having to completely rebuild the page.  I am a total novice and teach me how to do this using the DWCS3 Missing Manual book, but I can't find a solution in there, so please help if anyone can, with step by step instructions.

  If anyone has any idea how it happened, I'd appreciate comments so I do this again.

  If more information is needed, please let me know.

  Thank you

  Hi, Kelly.

  What keeps you from renaming files with Word spaces? It is a good idea. On ALL of your files. Rename them to the INSIDE of the files Panel.

  You work in a defined site? Yes, you are.

  The page you we directed (with an address disheveled, but easy to fix on the track), shows a large number of links to files on your computer, do not using links to other files in your root directory.

  You must open your template and reapply links to all images. Save the model. Once you have re-applied the links in your template Master.dwt, change > models > update of the Pages... while your model is open (especially if DW does not ask if you want to update the files). Record everything (better yet, don't have other pages opens when you update the pages...).

  Depending on how you created your page "Se Involved.html", it would be preferable for you to set up a new page of the child of your template and copy the changing content of the old page. Name the new page (without spaces in the file name... lol...) and save it. You won't be totally rebuild the page, because a lot of it will flow in your model.

  Commenting on your illustration to pdf, you want the indicator model-based Yellow Page in the upper right of your page based on a model of read model: Master. Pages containing the path to the top there are incorrect. I don't know how this happens, but it could be a problem with moving the files outside the DW (bad idea)... always use the files Panel to move files. You have full access to your computer in this window.

  Beth

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• Problems with the page numbering

  Hello there ' All!

  I received a few questions about the numbering of the pages:

  1. When the notes are present, they appear over my page numbers (in the lower left corner), which makes them invisible. How to avoid this?
  2. How can I ignore numbering for some pages, as the cover page, table of contents etc. ?
  3. How can I connect page numbers in my table of contents to my actual page numbers?
     

  Thank you!

  1A, ill-conceived layout? Page numbers should ideally be placed on your master pages, and outside of the margins, you book to plain text (i.e., top, side, or underneath the purple square). Move the frames of page number outside the place of purple Director. If there is no room for this, you need to adjust your margins!

  2. you can 'ignore' the page numbers (they will keep existing), but you can hide them in several different ways. Easier - and more dirty - trick is to put a white rectangle on them (don't do this!). You can also (Cmd) Ctrl + Shift + click on any element on a master page, so "free him" and then just delete the entire frame, with the page number and everything (I wish you didn't do this...). The best way is to assign a new master page to only those pages; a specially created for this purpose (if you have other elements that should appear on all pages), or simply the "[None]" blank page.

  3 search 'referrals' help if you use CS4. You can also search for "Table of contents", it may be useful to regenerate all the content, so the text is up-to-date as well.

• Problem with the font size, appears as expected.

  I've been struggling with this for a few weeks now, but surely must is close to solved it. It's just a problem with the size of the police to just that one page.

  http://www.kgngroup.NET/logos_and_packaging.html

  I want the body of the text to be 10px, but after two weeks, played with all conceivable means, change the font size of the body in CSS and the document itself. I have the consultation in Safari, but others on Windows machines tell me it is out of whack.

  My main problem is that I can change the size of the font in the extreme, but he always appears as the same size in the browser (about 12px.) I don't know can be changed because I can change the wording and change online. It's just a problem with the font size. Oh, and in the third column, the one on the right in Dreamweaver, the font looks like it of tiny, can't even read, but in the browser, as the style11 is applied, all three columns search size equal.

  Don't know where to go from here. I want to just that the police of the up to 10 pixels.

  TIA,

  Ken

  I guess this is a follow-up of your thread earlier

  http://forums.Adobe.com/message/3627681

  What would really help in the diagnosis of the subjects such as this is to install the Firebug add-on for Firefox (as suggested in the previous thread).

  Firebug shows you visually what CSS rules apply to any element you click on the screen.

  In this case, you have a confusion of the CSS cascading over each other font sizes and who is confused by the mix of units without real reason. .style11 is unnecessarily applied to many people

  Tags. Remove these classes and to remove the rule.

  for example

  The tiny font in the RHS column is the first affected by

  {.style8}
  font size: 0.5em;
  }

  affecting thethen by

  .style11 {size are: 75 %}}

  affecting the

  tag.

  Result = tiny text (about 2px).

  In these cases of mass confusion, my approach is to remove all the sizing of fonts in the CSS and start over.

  Avoid %. Use px.

  Apply font sizing rules logically from thelabel facing downwards.

  That gives you a solid basis without strange effects.

• I have a problem with the HP Deskjet2545 do not print on the computer.

  Printer does not print. Computer says "printer error". Convenience store said that the problem is resolved. The printer is 'ready' doesnot even impression. What is the solution?

  Original title: hpDeskjet2545.

  Hi Matt,

  Thanks for posting your query in the Microsoft Community.

  Printers to print documents, photos, cards and calendars. You have a problem with the printer doesn't work is not on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) have you tried the troubleshooting steps?

  (3) what is the version of Windows installed on the computer?

  (4) have you made changes on the computer before the show?

  I would like more information about the issue.

  Note: assuming that you are running Windows 7, I would like to suggest some troubleshooting steps.

  Method 1-

  I would have you look at the article-

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2-

  I wish that you uninstall and reinstall the printer.

  See the article-

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 3-

  I would have you go through the troubleshooting proposed by HP guide.

  Check out the link-

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3571292

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• the problem with the wi - fi does not work on windows 8.1

  Hello dear forum users (sorry for the English, use a translator)

  I have a laptop HP Pavilion dv6-7055er, 8.1 Windows 64-bit

  Card Broadcom WiFi 802.11b/g/n 1 x 1 4313GN worked on windows 7, but fails on windows 8.1. Tried to find the driver on the broadcom , but not found. Device Manager indicates that the problem with a PCI device. Specifies no problems with the Wi - Fi adapter.

  What could be the cause and how to fix it? Thank you!

  It seems that your WIFI adapter is not supported by Windows 8.1

  There are a few options available.

  The first and simplest is to purchase a USB wifi adapter to plug into one of the USB ports on the laptop. I have a dual ASUS USB-AC56 band that meets the 802.11ac specification.

  The second option will be to take a look at the installed optional wifi adapters to see if they have Windows 8.1 supports, buy one to replace the Broadcom card installed with.

  Ok. The two following adapters are compatible with your laptop and Windows 8.1. They have a BIOS support.

  The Qualcomm Atheros AR9485

  The Intel Centrino Advanced - N 6230 WLAN module

• I am running Windows XP and I'm trying to upgrade to Windows 7. There seems to be a problem with the administrator no no not the permission to create a file?

  I am running windows XP.  I try to install the upgrade to windows 7.  I was on the phone with technical support of 4 - 5 times, and they may not always help.  There seems to be a problem with the administrator and with not not permission to create a file?  I have a HP desktop computer. Can anyone help?

  original title: help with Windows 7 install

  Hello

  ·         Account administrator that you use?

  ·         You have the disc to install Windows 7 or upgrade disk?

  Follow these steps and check if that helps.

  Step 1:

  To see if your PC is ready for Windows 7, download free Windows 7 Upgrade Advisor. It scans your PC for potential issues with your hardware, devices, installed programs and recommends what to do before upgrade you.

  Windows 7 Upgrade Advisor

  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  Step 2:

  Follow the exact steps in this article and check if that helps.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  Note: Make sure that you back up all important data on the computer before you install Windows 7.

• I have exactly the same problem with the radial program point not to let me install mcafee what should I do?

  I'm having the same exact problem with the point radial program does not let me install mcAfee which can do?

  There is some information about this here: https://community.mcafee.com/thread/19119?start=0&tstart=0

  If this does not help, contact McAfee technical support. They should help you.

• Problem with the page load twitches and shakes in DW

  Hi, I had a problem that is compatible with my site design where pages shake, shake and bounce to navigate through the Web site.  I know it's something I am doing wrong but can't see so he can erase.  Here is an example of a current Web site that is in production http://classic2014.com.previewdns.com/index.html

  Of course, I'd appreciate any guidance.  I tried to add the widths, delete them, but this problem of load shake following me from site to site.

  Thanks in advance.  Mark

  On line 46 in code view, I certainly see what is not valid.

  You can add a ScrollBar channel to all pages with this CSS rule.

  HTML {overflow-y: scroll}

  Nancy O.
  

• Problems with the page in Internet Explorer 7 times layouts

  Hello

  I created this site in Dreamweaver CS6 using webfonts.

  http://www.fjgpharma.com/index.html

  It's fine on all browsers except IE 7 , where the type on the pages that follow is not displayed correctly:

  • Index - blue sub-heading is divided on two lines when it should be on a

  • About - 'technical management' appears as a sort of link

  • Services - dashes are misaligned

  I've already added the following code:

  <!-[if lt IE 9] >

  " < script src =" http://html5shiv.googlecode.com/svn/trunk/HTML5.js "> < / script > .

  <! [endif]-->

  Can anyone offer me any advice on how can I fix?

  Thank you!

  By 'technical management' is displayed as a link, I'm guessing that you have some kind of Malware or downloaded Junkware that infect your version of IE7. There is no link in the code, so it should not appear as a link in any version of any browser.

  You can run an anti-virus/malware program and see if it picks up anything.

  Are you sure you still want to support IE7?

  According to everything I've seen, somewhere in between. 5% and 1% of all users have installed IE7.

  Now with Windows XP "death Date" set for April 8 next year, IE8 should start to fall dramatically (currently at about 6%) current XP users are forced to upgrade or be subject to unpatched issues after this date.

• Problem with the page turns with the OSM

  Just downloaded the version 23 of the content viewer. I consult my folio/articles on an ipad 1 and I still thorny issues when it comes to the page turns:

  1 if there is no MSO, page turns very well and is aligned with the previous or next as expected.

  2. to the ESM pages, if I do not commit to the OSM, it snaps to the next page or previous fine.

  3. If I click on the ASM then try to turn the page, he jitters and shakes and remain on the page or is blocked to halfway. When I try even once, it turns out as expected.

  I heard that by disabling the function of zoom in on PDF folios will solve the problem. If I don't create my own custom Viewer (I do not have a version company, just one question release them a) how can I make pages with active MSOs run properly?

  I typed double (or triple typed, I forgot) the title of the header on the Viewer to reveal that I use in effect v23. Also use lightbox version 23 in Folio properties. Also rebooted the ipad to make sure. Any help will be greatly appreciated.

  By the way, THANKS ADOBE! A lot of people complaining about things on this forum... But if it wasn't for what you did with DPS and InDesign, there is no way I or countless others could even dream of creating an application without having to pay a programmer hunderds if not thousands of dollars to the code! InDesign is one of the most elegant and most stable programs I've ever used. Add to that the ability to create applications tablet and it's just a force to be reckoned with! I < 3 Adobe and InDesign! Wow, that last sentence looks like it has been seized by a prepubescent girl. I am a man of 41 with 2 children just to be clear!

  You're right, it's the same question, as seen in the other thread. You can fix this by disabling PDF zoom when you build your application. When you go through the process to create your simple editing application, you should see "Show the Advanced Options" on the details page of the App in DPS App Builder. You can uncheck enable PDF zoom it.

  On behalf of the team, you are welcome. Thanks for the kind words

  Neil

• Problem with the conditional formatting according to pivot

  Hi all
  
  OBIEE version 10.1.3.3.3
  I have a measurement with the following condition column
  
  Measure:
  -Case when DATE < VALUEOF ("CC_DATE") and the actual amount of another amount, then end
  
  Here CC_DATE is variable repository
  
  I created a column duplicated by the following condition
  
  Double column:
  BOX WHEN Date < VALUEOF("CC_DATE") then end if 0-1
  
  And try to use duplicate column in a measure of conditional formatting, however I do not succeed
  
  any suggestion to solve this problem?
  
  
  Thank you
  SMA

  SMA,

  Check the link below if you want to put in shape measures based on the intersection of the dimension. A variant of the above link.
  http://www.obinotes.com/2010/10/format-cellmeasure-value-based-on-row.html

  J
  -bifacts
  http://www.obinotes.com

• Problem with the page using the not substituted VO

  Hi all
  
  
  
  I expanded the view object AbsenceSummaryVO of the/oracle/apps/per/selfservice/mgrviews/webui/ManagerViewsPG of the page. I created a new view object that extends the object from view of AbsenceSummaryVO, it contains a few added columns.
  
  These added through customization, I added to the tab of the absence of columns. The only problem is... that they are not fulfilled. It seems that Oracle ignores the request to be executed instead of the old one (old data appears perfectly). One of the current columns also changing a value hardcoded still looks like the old value (data base).
  
  
  
  When I look in the MDS repository, I can see the substitution is deployed, remove also the XML necessary for replacement of the filesystem is Oracle generates an error.
  
  Below the output from the MDS repository:
  
  ---
  
  <? XML version = "1.0" encoding = "UTF - 8"? >
  
  < customization xmlns = "http://xmlns.oracle.com/jrad" xmlns:ui = "http://xmlns.oracle.com/uix/ui" xmlns:oa = "http://xmlns.oracle.com/oa" xmlns: user = "http://xmlns.oracle.com/user" version = "9.0.3.8.13_1566"; XML: lang = "en".
  
  Customizes = ' / oracle/apps/by/self-service/mgrviews/Server/AbsenceSummaryVO ">
  
  < replace with = "/ xx/oracle/apps/by/self-service/mgrviews/Server/AbsenceSummaryVOEx2" / >
  
  < / customization >
  
  ---
  
  
  
  When I look at the page on the business components used, I see the substituted object seen used. However it does not appear in the substitute for the table column, but in a 'normal' line The original view object (AbsenceSummaryVO) is missing from this list. I find it rather strange.
  
  
  
  Everyone recognizes this kind of behavior? And what to do about it?
  
  
  
  Kind regards
  
  
  
  Patrick

  Patrick,

  You must extend AbsSupHrchyVO instead of AbsenceSummaryVO.
  Although this page mentions that AbsenceSummaryVO is used for the columns it ignores changes to this VO.
  I expanded AbsSupHrchyVO on a test instance and added a few custom columns and they appear in the Absence sub-tab (/ oracle/apps/by/self-service/mgrviews/webui/AbsSupHrchyRN) now.

  Kind regards
  Robert

  Published by: robert.jungerius on March-24-2010 09:38

• problem with the page do not scroll (no scroll bar)

  I'm puzzled. I'm sure it's probably something simple, but I can't get the page of scrolling (scrolling bar) to show all text.  I'm guessing this has something to do with fixed heights or absolute positioning.  But I just can't get my head around it.  Any help anyone could provide would be greatly appreciated.

  Thanks, Kirk

  file

  http://blueyondermusic.com/history.htm

  CSS file

  http://blueyondermusic.com/pilotmagicmusic6.CSS

  Thank you

  Kirk

  You gave .header a height of 245px and which applied to the entire page.

  Place an end div tag where the header is supposed to end.

  Also, you have given the header a fixed position, which will ensure that it has been removed from the normal flow of the document. This allows content to flow behind the header.