Problem with the ID of Exchange in 997

Similar Questions

• Problem with the installation of Exchange 2010 Service Pack 1

  When you try to install exchange 2010 serverice pack 1, I get the following error:

  Error:
  "Setup cannot continue with the upgrade because the resource property contains invalid data: could not perform the operation because of objects of type 'Microsoft.Exchange.Data.Directory.SystemConfiguration.ResourceBookingConfig' could not be found on ' * My Server FQDN *'.
  Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default (EXCHG.141) .aspx? v = 14.1.218.11 & e = ms.exch.err.Ex28883C & l = 0 & cl = cp

  All other prerequisites are met, and the link help just tells me that there is no post for this mistake again.
  Maybe I'm the first? Sux.

  Hello AndreBaseline,

  Thanks for your post.  Please ask your question in the Exchange software updates forum TechNet they manipulate all server related issue.

  See you soon

• Problem with the currency in the form of exchange rate data

  Hi Experts,
  
  I have a problem in the form of exchange rate data. I created an application with several currencies (EUR, USD, INR) and I created a data form for the exchange rate. All work well, but all in am going to enter data for a given entity, then it is allowing me to enter only in local currency. I also need to enter data into its reference currency which is not possible for me. I tried the option allow multiple currencies per entity, but it does not work.
  
  For example: assume that the entity is in North America whose base currency is the USA but can not enter by the selection of currency local option when I select the currency like the US, is to show am only read, not able to get into the currency of the United States. But I need to enter data by selecting from the USA.
  
  Please help me on this.
  
  Thank you and best regards,
  Combot

  923621 wrote:
  I use built in currency conversion. The data that I entered the local currency saving in my base only currency, but my requirement is that the user must enter data by selecting its local currency (people of North America must select USD to enter data and Indian must select INR to enter data like that). Is it possible to like this.

  Select USD as the base currency for the North America and INR for the India (which is how it should be).

  So, whenever the user has to do the data through forms of data entry, it would be on the local currency and after the calculation is run it could fill its respective currency.

  Concerning
  -SM

• HP Officejet 5740: there is a problem with the printer

  Every day the printer (not standby) turns on and shows "there is a problem with the printer. Turn the printer off, then on. "why what is happening every day?

  This problem got solved, later. Although tech hp sent me the ink HPInstant and that they "reset" of my printer, the error message returned in a few days and continues every day. Another call to Tech Support/InstantInk advised me to return the printer for an Exchange (it's 60 miles a way back). We decided to install Instant ink cartridges, as a last resort to resolve the error messages, and it worked. No error message. I put the original ink cartridges in the printer I can use those to the top. Still no error message and this printer now works well. PERSONAL OPINION: When we enrolled in instantink, hp tried to contact our printer via wireless (whatever) and when it failed an error occurred every DAY, after the installation of the instant ink cartridges a connection has been established at hpinstantink have finished the registration process.

• Problem with the digital signatures of workers govt

  If I get emails quite frequently NAVAIRSYSCOM workers via my e-mail from work which is the right company, no Government excuseraient. On my last phone an orginal Droid, a few emaisl would tell me there was a problem with the digital signature for e-mails, but I always saw the e-mail itself.

  Since switching to the Maxx HD, I can see no longer the body of emaisl to these people. All I get is a "impossible to decrypt this message." It is not every person govt, but enough that it is very frustrating. Any ideas on how to work around this problem? and I know that the message is not encrypted, I can see fine by Exchange and we are app.

  We have a couple of our team focuses on similar issues. Passing this along.

• SEVERAL problems with the new X 34

  So, I have been active during the overclock.net forums concerning the many problems I am having with my X 34.

  Long story short, I'm back this thing to Newegg and waiting for another delivery. But I thought I'd come at least here because it has high liklihood to return to anyone who cares to Acer. I called their tech support to let them know about the issues, but when the old Indian robot for 2 years at the other end kept referring to as resolution of refresh rate, I decided that I couldn't take more.

  So I took delivery of the monitor yesterday and he initially worked well... but the longer he stayed, the more problems, he has developed.

  My system is one I built a year or two ago and works perfectly with my Dell 3008WFP. Video card is a brand new MSI 980 Ti Lightning. Operating system is Windows 10 x 64. Is a Corsair 750W POWER supply. 16 GB of DDR3 RAM.

  I even made a COMPLETELY new install of Windows 10 on this computer to try to resolve these problems. Did not work. I have disconnected/reconnected everything inside my computer, including RAM and GPU. Did not work.

  And Yes, G-sync is enabled in the NVCP. And Yes, I manually set the refresh rate in the NVCP in correlation with the manual settings on the monitor.

  Problem no. 1: Menu recording does not settings

  -Don't know what the problem is here. But for about 3 hours last night, my monitor would not save settings for serger refresh rate. I would go on the menu... allow the serger... Set it to 100 Hz... Select "Apply and restart. Then (here's the interesting thing I think in hindsight), the screen would flash many colors several times and restart. I assumed that flashing color was normal... but it was never the Predator Logo when it has been reset. The office is finally pointing upwards and I could choose 100 Hz in my NVCP... but when you returned from the settings menu, Overclock was Off back with the default refresh rate. I have nothing would fix it with the reset of the monitor and unplug. Later... I have unplugeed the monitor for 30 minutes and when I plugged it back in, it would save my overclock settings now. It is interesting, but now, when I selected "Apply and reset", he would show the Predator logo when restarting... this logo did not appear before.

  Problem #2: Flashing screen

  -See a video of this question HERE

  -This developed before my eyes. After the initial installation of the monitor, it worked fine. Without no flicker, no problems. But as I was sitting at the dinner table last night, I started to see the monitor flashing intermittently in the other room. I look at the screen, he flickered about 4 or 5 times per minute. For the next hour, he progressed to 30 - 40 times per minute. And subsequently developed in constant blinking. BUT this flicker only happens when I go to the Office at 100 Hz. It happens sometimes in games, but not constant.

  I first thought that I had a bad cable of DP since I used one from Amazon, if I swapped it for the Acer cable included. Nope... same problem. I even inserted my previous EVGA 780 TI... but the flicker that happens too.

  Then, I thought it was a driver problem, I did a clean install of the nVdiia previous drivers. Nope. Then a cleaning installed latest drivers from nVidia WHQL. Nope.

  Then I saw here that you can download the drivers for the monitor directly from Acer. So, I did a guy like an unsigned driver installation. Nope.

  After all this, the problem persists.

  Strange thing about this one is that there was when I first got the monitor but got progressively worse since I got it.

  Another weird thing is that if I have a window open, then it isn't twinkle... reduce the window, and he comes back. It's actually what made me think, it was a driver issue, but as you can see above, I think that I have ruled that that fully.

  Also, if I set my refresh rate to 95Hz or below, the problem occurs. (This is actually how I currently work).

  -UPDATE: the issue has actually started just after executing i1Profiler to calibrate the screen several times back to back. I can't imagine how, but could the rapid exchange of multiple colors full screen damaged electronics somehow? Or is it just a weird coincidence?

  -UPDATED #2: it was suggested that ADC can cause the problem as it caused problems with the previous Acer monitors. So I completely deleted i1Profiler and reset my default .icc profile. I also think that I figured out how to do a monitor factory reset - if you hold the buttons first and fifth, restarting the screen and all the default settings. in any case, does too and the blinking persists...

  #3 problem: Backlight horrible bleeding

  I have to type anything here? Leave some pictures to speak for themselves...

  

  

  Trouble #4: Parts of the screen does not not on

  It has been described elsewhere, so I won't detail it here. But yes, I have the same problem. Here is a representative of my monitor picture when the issue arose.

  

  Overall, I am extremely disappointed, although I can't say I'm surprised. I mean, we deal with Acer here guys... Not exactly known for the high-end products. You can put the red lipstick on a pig...

  So is there more any idea or suggestion out there?

  Until then... I'll wait for my new X 34 excerpt here from Newegg to see if I won the lottery of Acer he...

  I created this post to be a "accepted solution" to this thread with the purpose to help other users who need to find the answers. This should help to find this information faster than to have to go almost 800 posts to find pieces of information.

  Wake up from sleep (backlight) - initial response and follow-up

  Problems with Overclocking at 100 hz - original response

  Coil - Whine Original response

  Color banding - users in Australia reported the problem. The teams in the region to THE have been notified and a firmware is available.

  -Scanning lines Original response

  Thank you
  Cory

• OfficeJet Pro 8600 +. Error "there is a problem with the printer or the ink system... »

  OfficeJet Pro 8600 +.  Once we replaced the ink cartridges, our printer gives an error "there is a problem with the printer or the ink system.  Turn the printer off, then on.  If the problem persists, contact HP.  We've gone through the start/stop several times.  We also pulled back and ink cartridges in, in addition to taking the print head at.  I ran a diagnostic test download and it comes back with "unknown error (06).  Help, please!

  Thanks for your reply.  We exchanged all Costco ink cartridges and the printer seems to work very well at this point.  Yes, we did all of the print head and cartridge cleanings.  Nothing seemed to help.

• Creative sync cloud app. problem with the web application

  Hello

  I have some problems with the synchronization of files in the creative Cloud Files folder on my computer (I use a Mac) and the Creative Cloud Web App. practically the files I have on my computer folder do not appear on the web (and I can't create links of sharing for them) and vice versa. We have a team account and we can exchange files between us, but nothing appears on the web application. The problem applies to all members of the team.

  There is a problem with the service or it could be a local problem?

  Thank you

  Florin

  @ursuss - what you see in the creative Cloud Files folder on your computer must match what you see on the site Active CC to https://assets.adobe.com/files.

  Use the collector for the Adobe Log tool to https://helpx.adobe.com/creative-cloud/kb/cc-log-collector.html and newspapers as well as the explanation of the problem by e-mail at [email protected]. Please provide additional information indicated by Warner Harress in this Adobe forum post https://forums.adobe.com/message/8385752#8385752.

• Problems with the relaunch of the CC Photo account

  Tried to restart my account during my stay abroad (USA), the account now has a problem with the payment and cannot be reactivated (assumed that the monthly rate is due to the weak USD-Euro exchange - please helpP

  Please contact customer service for updating the payment. You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• Problems with the extension manager for 2015 of CC (was: Extension Manager fails to load products)

  Can Hi anyone help me understand what could be the problem with my extensions Manager. I just installed or rather updated all my apps, including extensions through the CC Manager Manager. After updated all my applications, I think I lost all my extensions on Photoshop CC 2015. So I tried to reinstall the extensions Manager and update it, but the problem seems to be it seems to take on Photoshop, which makes it difficult for me to install new extensions. Is there something escapes me?

  Hi Didier,.

  See a related discussion on the same topic: Re: Extensions CC2015 gone

  I heard the team there are some problems with the Add-ons and the command line tool, and the team is trying to solve. I'll let you know as soon as I have an update.

  See Adobe Exchange for official communication on the extensions Manager.

  Thank you

  Preran

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• iOS 10 problems with the Mail application

  Dear Apple and community support,

  Here's my problem:

  I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails. When I press on them, all I see is a blank white page. I can't answer emails either. I can only their flag or remove them. However, I am able to compose new e-mail messages.

  Here are the steps that I've taken to try to solve my problem:

  1. Restarted my phone
  2. Remove and re-add my Mail accounts
  3. Made a backup and a restore full while that plugged into my laptop with the latest version of iTunes.

  I should be grateful if you would help or more information on this issue.

  Thank you

  Emily

  I also have problems with the Mail application.  On my iphone, ipad, and Mac Pro.  I have several addresses, a MSN, another on Go Daddy and Gmail.  I have various weird problems with threads and every day he re-charge my emails, like if I have never read before.  Something is really problematic with Mail.

  Can the people of APPLE, you help me?

• Problem with the installation of iOS 10

  I tried to install iOS 10 earlier but it did not work, so now that I'm trying to reinstall iOS 9 if my phone will work again, if this does not work I have to reset my phone (but I am a fool and did not a back-up because I never had a problem with the software updates in the past if all data will be lost).

  < published by host >

  The same problem with me too. After installing ios 10 nuer OTA my iphone brick! I'm trying to re - install ios 9 i-Tunes, but 2 hours now always stop installation... what happent?