Problem with the ID of Instance

Similar Questions

• Problem with the config.ini instance

  Hi all
  
  I added a line code in my file config.ini to instance
  
  < WebConfig >
  < ServerInstance >
  < ForceRefresh > TRUE < / ForceRefresh >
  < / ServerInstance >
  < / WebConfig >
  
  
  According to my knowledge, it will be of MetaFrame query and cache the server cache not OBI... pls correct if I'm wrong... and that this change affects performance (slow down or delay) of the report have generated by the user.
  
  
  pls advice... If there is some other way to use the passing the Presentation server cache server cache not OBI.
  
  Thank you

  Now can you pls correct me if I'm wrong after purging the server cache and * not ignitions presentation server cache * IBOT will take the latest data from the database.

  Yes it will be latest data from DB and to your right. If you purge the server cache everything is cleaned and when MetaFrame is run, that he must speak to the BI server to fetch the details in order to accommodate the presentation server cache, as requested.

  There is another method to purge the cache after each race AND, you create an ibot for the fire and by writing a custom script it purge old data and we need to plan sound after the ETL run... so it cleans the data and when the end-user is delivered the next day and want to see new data, it is there to see. It could help you
  http://vivekkulthe.blogspot.com/2008/08/purging-cache-using-ibots.html

  To improve the performance of reports, you can do this http://blog.guident.com/2009/12/many-dashboards-on-most-systems-can-be.html

  See you soon,.
  KK

• Problems with the propertie recognized in WCS

  Hello

  I have a problem with the ACK propertie in the WCS. I check a logg entry in the logg with the receipt, within a few seconds/minutes/hours this alarm disappear, and then if this alarm appears again, this message show marked ACK.

  Should not the message again without significant acknowledgement? What is the problem?

  Thanks in advance

  Hello

  According to also which is indicated in the official guides, this seems to be the expected behavior:

  '' You acknowledge receipt of the alarm to prevent it from appearing in the alarm summary page. The alarm remains in WCS and you can search all the alarms that are paid using the alarm search. »

  http://www.Cisco.com/en/us/docs/wireless/WCS/7.0/Configuration/Guide/7_0event.html#wp1229996

  So, you can accuse reception that specific alarm once do not show on the alarm page, only for this event. If however the alarm goes off again, the new instance will appear and let you know that you already recognize a similar instance.

  Hope that clarifies the behavior,

  Fede

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• What is the problem with the BizTalk configuration tool?

  I just installed BizTalk Server 2010 (developer edition) and I restarted my computer, but the Configuration tool will not charge. Instead of loading the configuration tool, a dialog box displays saying "another instance of this program is already running" with the title saying "error". I am sure that no other instances of the configuration tool are already running. What's not here? If anyone can help me, that would be greatly appreciated.

  Hi NateKoepke,

   
  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems with the installation of BizTalk Server 2010. Please correct me that I misunderstood.
   
  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums.
  http://social.msdn.Microsoft.com/forums/en-us/biztalkgeneral/threads/

• Problems with the 'Text Ticker' Widget

  Hello, I have a problem with the widget "Ticker text." I tried to put more ticker and then a text on my site, but it does not work, when I look in Muse it looks like this:

  

  and when I look in the preview only the first text ticker works... maybe it is not possible to have more then ticker text on a site?

  

  Thank you.

  It seems that you use the same name for all instances of ticker on the page.

  You must have a unique name for each ticker you want on a single page. Strips with duplicate names will not work.

  

  See you soon,.

  Vikas

• strange problem with the database link

  Hello world
  
  I have a strange problem with the link of database in Oracle 11 g Express Edition;
  There are two computers: computer-server and the client computer. Tnsnames.ora are the same on both computers IE.
  
  CT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  )
  (CONNECT_DATA = (SERVICE_NAME = XE)
  )
  )
  
  I created the database link:
  
  Create database link zdalny
  Connect to < user_id > identified by < password >
  using "CT".
  
  Customer cannot connect with server when I do not use above the command. But when I change 'use' for using "krzysztof:1521" or by using "krzysztof" or "server IP:1521" - everything is ok.
  
  Why I ask. Because in all the materials that I read about Oracle command with the help of "CT" should work correct. But there is no. Do you know why?
  
  Thanks in advance and apologize me for my English.
  
  Rgds
  Krzysztof

  Here's the tnsnames of your server, but to connect to the oracle server db (any client or to another instance of db oracle), you must install oracle client.
  However, in your condition, you want to connect the DB1 Oracle OracleDB2 using a link db, I'm right? In this case you should always set the entry in the tnsnames.ora
  To verify that you can connect to Oracle DB2 from DB1 Oracle, you can use tnsping in the command line.
  In your case

  c:\tnsping CT
  

  Krzysztof Szymaniak wrote: CT =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  Check your tnsnames entry in the machine, you are trying to connect to. And check if the tnsping is successful.
  Sometimes the error message says not everything, which means that you need to troubleshoot yourself and learn from the experience.
  Always in the opposite case, refer to the documentation.

  See you soon.

  Published by: Spongebob December 14, 2011 09:30

• Problems with the movement of the front and back layers

  Hey everybody!

  I am very new to Flash, very very new to actionscript and basically, I started programming in general 2 days ago, and I have a problem with the layers in a project. I tried learning through books, but especially thanks to youtube tutorials, but I'm stuck here.

  Here is the .swf file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.swf

  And here is the original .fla file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.fla

  Two problems:

  1. I want maps to fly BEHIND the Logo, but in front of the shadow - so that it seems that the logo is original and the rest (maps and shadow) is in the back. I have 3 layers (Logo, Action, shadow), but no matter how to move around it do not go to the back...

  2. I would like to have a second fountain Let's say right left... can I just copy and paste the code? Seems similar is not...

  Can someone help me on this one? Pleeeeez ?

  Mike

  To create an empty movieclip you just select Insert-> new symbol and select movieclip and click OK.  Simply exit the editing for this movieclip mode by selecting Edit-> Edit the Document.  You now have a new empty movieclip in your library.

  With the desired layer selected, drag an instance of the movieclip in the library in the upper left corner of the stage and then give it an instance name of "mc" in the properties panel.

  I have no CS5.5, so I don't know if what I described in selecting is changed in the new design.

• Problem with the tool move? (Win 7)

  On Photoshop CS4, whenever I select the move tool and decide to move an object in a layer, it moves the object off the screen, making it difficult to bring the canvas to move. I know he's not jumping the layers, because only the object within a single layer, I moved, but I'm the only one who has this problem? How should I do?

  He has only this problem with the tool move, but with scrolling text, text tools tool and the Brush tool, as well. The text tool jump out of the screen and the marquee tool would position the tent somewhere else when I clicked on it to be the Brush tool sometimes jumped on the outline of the brush. Can anyone help?

  Market and stop over the years, I found that Photoshop itself could corrupt if used for a long time.  Or he might not.

  That's how (or if) it does seems to vary depending on other factors.  With some display drivers, for example, sometimes much more.  A particularly frustrating event is when Photoshop just stops where you try a file - save as.  Another, quite common, is that multiple instances of Community Help just start to open jerky.  But probably no matter much what look like symptoms; the source of the corruption, which has been expired for a long time.

  I don't think that it's just a problem, either, but probably several - at least a part of which are due to bugs in the drivers.  From time to time, we hear about specific versions of display drivers, for example, that have been seen to increase the likelihood of corruption.  And some, like ATI Catalyst 11.7 earlier this year, seem to minimize problems.

  What I don't know, because I don't use a Mac, is whether the same situation exists on this side of the fence.  In my heart of hearts, I suspect that it does.  Maybe it has to do with models of memory used under the covers.

  I * CAN * tell you that CS6 is not available yet.

  -Christmas

• What is the problem with the sequences on RAC environments?

  Version: 10 g, 11G
  
  I've never worked on CARS. But I keep seeing discussions about the problems with the sequences on CCR environments. What exactly is the
  basic question?

  Can be performance issues if you have a large number of sequences of nocache as it may cause heavy IO for the system tablespace.

  Given that each instance will have its own cache seqeuence that some sites are unhappy with significant gaps in the values, this can cause.

  There was also a blocking problem caused by heavy simultaneous new connection activity requiring the issuance value audsid for the session of v$. To solve this just to the top of the cache size to 1,000 or 10,000 by default if you are on a version where the value was not moved upward by Oracle already.

  As far as the first two numbers go that my view is if the sequence does not need to be cached you need not use a sequence to generate value. If you need a value without interval then you need to get your value from a table column value that is part of the transaction and do not use a sequence in a first time.

  Sequences are designed for speed and concurrentcy, and this competition is priced at gaps.

  HTH - Mark D Powell.

• Problem with the Archive log in Oracle 11 g

  Hi gurus,
  
  I'm new in the DBA role and I have real problems with the archive logs - they are written to the wrong place.
  This is my environment:
  Windows Server 2003 Enterprise x 64 Edition; Oracle 11g EE + ASM;
  I did everything according to the instructions.
  I did the following:
  1. install Oracle 11 g software
  2 instance created using DBCA for ASM in the same House and added a no formatted disk as a DATA disk group
  3 database instance created using DBCA mode archive using ASM for data files. I've mirrored controlfiles and redo online records on the C: drive. I created flash_recovery_area and a reference to it when the instance was created.
  4. start to import the data.
  
  And here's the problem - for an unknown to me reason archive logs are written on 2 places: 1. in the flash_recovery_area, 2; IN MY ORACLE_HOME!
  
  I opened with EM dbconsole init settings and found that there is a single parameter, that points to this place (standby_archive_dest =' docs in the % ORACLE_HOME%\RDBMS, it is written that it is an obsolete parameter). Is another parameter that I found (LOG_ARCHIVE_LOCAL_FIRST = TRUE - I put it to FALSE), but nothing to help continue to write in ORACLE_HOME.
  
  How can I stop it? If I can't stop, so what happens in production? Should I manually delete all newspapers of this Archive - it will be madness!

  Try to set log_archive_dest_1 specifically. Example: -.

  ALTER system set db_recovery_file_dest_size = 400G;
  ALTER system set db_recovery_file_dest = '+ ASM_ORADATA42;
  ALTER system set log_archive_dest_state_1 = reporter;
  ALTER system set LOG_ARCHIVE_DEST_1 is 'LOCATION = USE_DB_RECOVERY_FILE_DEST VALID_FOR =(ONLINE_LOGFILE,ALL_ROLES)';.
  ALTER system set log_archive_dest_state_1 = enable;

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• iOS 10 problems with the Mail application

  Dear Apple and community support,

  Here's my problem:

  I have upgraded to iOS 10 on my iPhone 5s this afternoon (September 13), and now I'm not able to open e-mail - Yahoo!, and Gmail. I can receive emails, I'm not able to view the body of these emails. When I press on them, all I see is a blank white page. I can't answer emails either. I can only their flag or remove them. However, I am able to compose new e-mail messages.

  Here are the steps that I've taken to try to solve my problem:

  1. Restarted my phone
  2. Remove and re-add my Mail accounts
  3. Made a backup and a restore full while that plugged into my laptop with the latest version of iTunes.

  I should be grateful if you would help or more information on this issue.

  Thank you

  Emily

  I also have problems with the Mail application.  On my iphone, ipad, and Mac Pro.  I have several addresses, a MSN, another on Go Daddy and Gmail.  I have various weird problems with threads and every day he re-charge my emails, like if I have never read before.  Something is really problematic with Mail.

  Can the people of APPLE, you help me?

• Problem with the installation of iOS 10

  I tried to install iOS 10 earlier but it did not work, so now that I'm trying to reinstall iOS 9 if my phone will work again, if this does not work I have to reset my phone (but I am a fool and did not a back-up because I never had a problem with the software updates in the past if all data will be lost).

  < published by host >

  The same problem with me too. After installing ios 10 nuer OTA my iphone brick! I'm trying to re - install ios 9 i-Tunes, but 2 hours now always stop installation... what happent?