Problem with the image on the LCD - Satellite L870

Similar Questions

• Problems with the battery / Satellite A100 - 151 (PSAA9)

  Hello!

  My Toshiba laptop 3/4 years, has had problems with the battery. Battery does not charge properly and to start windows, the laptop down even when the battery is at 70%. Normal use without AC is not possible. The first 3 months, the laptop worked well with no battery problems.

  I hope to get help for my problem.

  Greetings

  Sebastian

  Hi Sebastian

  Maybe is the problem on the battery itself. Without a lot of discussion, I recommend you contact the Service partner in your country. I hope you will get free new battery due to valid warranty.

• What are the audio problems with the Toshiba Satellite L305-S5928?

  The Audio on my Toshiba Satellite L305-S5928 jump, when listening to music or movies. It often looks like tearing, or as if it gets stuck.

  Hello

  ·         What operating system do you use?

  ·         Using 32-bit or 64-bit operating system?

  Method 1:

  I suggest you try to use the Audio playback problems troubleshooting to solve the problem. Click on the link below.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:

  I suggest you update the audio drivers on the manufacturer's Web site see the link below:

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Method 3:

  I suggest to follow the steps outlined in the article below and check if it helps to solve the problem:

  http://Windows.Microsoft.com/en-in/Windows7/how-do-I-stop-my-music-from-skipping-or-breaking-up-when-I-play-it

  See also the link below:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  I hope this helps.

• Problems with the LCD - samples.war 2.6 LCD screens

  Hello!
  We are trying to compile a project with screens LCD - samples.war, using LCDS 2.6 Beta 1, and it does not work. It generates this error:
  
  AddChannel (String) method is undefined for the type DataDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 55
  
  CreateDestination (DestinationSettings) in DataService type method is not applicable for the arguments (String) LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 54
  
  CreateDestination (DestinationSettings) in the MessageService type method is not applicable for the arguments (String) LCD-samples/src/flex/samples/runtimeconfig
  ChatRoomService.java
  line 42
  
  CreateDestination (DestinationSettings) in the RemotingService type method is not applicable for the arguments (String) LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeRemotingDestination.java
  line 18
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments () lcds-samples/src/flex/samples/feed
  Feed.Java
  line 32
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments () lcds-samples/src/flex/samples/feed
  Feed.Java
  line 53
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments (lcds-samples/src/flex/samples/marketdata)
  Feed.Java
  line 42
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments (lcds-samples/src/flex/samples/marketdata)
  Feed.Java
  line 67
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments (lcds-samples/src/flex/samples/pdfgen)
  PDFService.java
  line 32
  
  The createUUID (boolean) in the UUIDUtils type method is not applicable for the arguments (lcds-samples/src/flex/samples/pdfgen)
  XDPXFAService.java
  line 32
  
  The method getFlexClient() is undefined for the type FlexContext LCD-samples/src/flex/samples/qos FlexClientConfigService.java line 15
  
  The method getFlexClient() is undefined for the type FlexContext LCD-samples/src/flex/samples/qos FlexClientConfigService.java line 21
  
  Method getService (String) is undefined for the type MessageBroker LCD-samples/src/flex/samples/runtimeconfig
  ChatRoomService.java
  line 41
  
  Method getService (String) is undefined for the type MessageBroker LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 53
  
  Method getService (String) is undefined for the type MessageBroker LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeRemotingDestination.java
  line 17
  
  The method isStarted() is undefined for the type MessageService LCD-samples/src/flex/samples/runtimeconfig
  ChatRoomService.java
  line 44
  
  SetDestination (DataDestination) method is undefined for the type JavaAdapter LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 78
  
  The setId (String) method is undefined for the type JavaAdapter LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 76
  
  SetMetadataSettings (MetadataSettings) method is undefined for the type DataDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 61
  
  SetNetworkSettings (DataNetworkSettings) method is undefined for the type DataDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 73
  
  The setScope (String) method is undefined for the type DataDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 57
  
  The setSource (String) method is undefined for the type DataDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 56
  
  The setSource (String) method is undefined for the type RemotingDestination LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeRemotingDestination.java
  line 19
  
  SetSubscriptionTimeoutMinutes (int) method is undefined for the type DataNetworkSettings LCD-samples/src/flex/samples/runtimeconfig
  EmployeeRuntimeDataDestination.java
  line 64
  
  The start() method is undefined for the type MessageDestination LCD-samples/src/flex/samples/runtimeconfig
  ChatRoomService.java
  line 46
  
  The DatabaseCheckService type must implement the inherited abstract method Service.getSettings () DatabaseCheckService.java LCD-samples/src/flex/samples 9 line
  
  The EmployeeRuntimeDataDestination type must implement the inherited abstract method Service.getSettings (LCD-samples/src/flex/samples/runtimeconfig)
  EmployeeRuntimeDataDestination.java
  line 44
  
  The EmployeeRuntimeRemotingDestination type must implement the inherited abstract method Service.getSettings (LCD-samples/src/flex/samples/runtimeconfig)
  EmployeeRuntimeRemotingDestination.java
  line 8
  
  Do you know something? There is a updated version of screens LCD - samples.war to LCDs 2.6?
  

  Hi Rafael,.

  LCDS 2.6 is not available on Adobe Labs. Please address all questions and issues the appropriate preliminary Forum.

• Battery problems with the new Satellite click Mini

  Hi guys,.

  my camera is completely discharged which was quite annoying. So I rebooted the tablet to 100% and the keyboard battery was at the time, reading 100% load. Applied bios update 1.70, after startup, the keyboard battery showing 0%. Now it will not charge, the Tablet is 100% and Windows reports battery 2 loads but it remains at 0%.

  There is a sharp screeching electric from the keyboard dock? Would it be a bad battery? Or is it so deeply discharged it will not charge?

  Thanks in advance

  If the battery is deeply discharged, you must hold the power adapter plugged in for at least 24 hours...

  But the sharp wail of electric from the keyboard docking station seems really strange...
  I can imagine that there is some lose connection or a hardware problem...

  In any case, Tablet must be connected to the power adapter and docked to the docking keyboard while loading... Please also make sure that the Tablet is TURNED off (press and hold the button to turn off the Tablet 10-15 sec)

• Satellite A500 - problem with the monitor after restoration

  Hello
  I have a Satellite A500. He has a problem with the monitor for a while, when you turn it on it's all lines etc. and you can not read but once the laptop to boot completely it is fine. My problem is that I wanted to do a restore, but I couldn't because the screen problem it started so I plugged into an external monitor and perform the restore. That has worked well.

  But now the laptop recognizes any my laptop screen. When you go to view it offers no other monitor choice other than external, I used for the restoration. I downloaded the display driver but nothing has changed.
  ANY IDEAS?

  Thank you

  (I have the disks for the restoration, if that helps.)

  > There a problem with the monitor for a while, when you turn it on it's all lines etc. and you can't read
  If I understand you right you can see when laptop starts and you see Toshiba welcome screen. Is this good?
  When you enter the BIOS settings you see thise lines too?

  Later, when you see the desktop on the external monitor, you can use the FN + F5 key combination to switch between an LCD and external monitor. Please try to use it and post comments if it works or not.

  What operating system do you use?

• Satellite C850 - found problems with the networking and the FN key

  Hey everybody,

  I work on a Satellite Toshiba C850, that my parents recently bought and spin in a certain number of questions.

  (1) wireless won't connect to my network. Have done the following: verified by connecting on two other computers, reset the router, the open network, reset the map, reinstalled the realtek drivers, checked the settings in the networking of Toshiba Utilities. End result is he's going to try, and fail. Wired LAN works fine.

  (2) FN key does not work. Have you checked the region and it is OK, have tried to use the Flash cards - no change, checked with the screen keyboard and can check the FN key does not register.

  I noticed that the first problem is common, but there are obvious positive results. If anyone can offer any assistance, I would appreciate it a lot.

  Before you begin to discuss your problems can you please tell us what OS you are using?
  Are you using the original OS that you got with your laptop? I mean original recovery image has been tested and works correctly, with the factory settings that all should especially the FN keys.

  1 / What do you mean with refusing? your WLAN is visible for your laptop?

  2 / if there is problem with the feature keys FN and you use Win7 try please reinstall extra package from Toshiba.

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Satellite C40D-C - problems with the system

  I recently bought an a toshiba satellite C40D-C Series notebook PC as my old satellite - essentially - is dying. After you connect to the internet, I tried to download AVG Antivirus on my computer that I don't have - and never - trust McAfee anti-virus that comes with the computer. Every time downloaded AVG then restart my computer, the computer goes directly into the automatic repair system and doesn't let me do anything but to reset or restore. This has happened even with completely removed McAfee. I've been on AVG directly today (January 15), and they have to do remote set-up for me - with the same results. Yes, I'm aware that McAfee is a selfish cry of a system and refuses to acknowledge any other antivirus, but that this issue happens even with completely removed McAfee shows clearly that it is something that Toshiba has worked in the system. I can't even disable the automatic repair tool. I have to be stuck with a McAfee antivirus which, moreover, does not yet or is Toshiba will make an effort to help solve a problem they caused?

  Why this computer isn't allowing AVG Antivirus work? And why, after each attempt to download AVG, the computer goes to auto repair whenever I shut down or restart? Is this a problem with the system or something, Toshiba has done on purpose?

• Satellite U500-17F: problems with the new HARD drive

  Hi everyone, I got some troubleshooting with my Satellite and a new drive, I bought recently, because that is already damaged because of too many bad sectors. One is a Western Digital Scorpio Black 320 Bg (WD3200BEKT model number). It should be a fast reader but is not with my Satellite.

  After having mounted the drive in the laptop, I ran a new installation (with full disk format} Windows 7 (64 bit) with all the necessary drivers (that I downloaded directly from the Page of Support Toshiba.)

  The problem is that the laptop needs a lot of time to start and also to disable, and whenever I try to run an application or start a program (for example Firefox, or just a few windows applications), the laptop freezes for about 30 to 60 seconds, the drive no longer works (you can hear leaders put in position 'parking' and the HDD LED control is constant) ", no lights flashing).

  It seems that the drive (during this 30-60 seconds) in something as a stand-by mode. I ran a few Western Digital diagnostic tools and the car looks all right to 100%. It works also without any problems in the other laptop (HP Pavilion DV6500). Could this be a problem with the controller (Intel ICH9M - E ATA AHCI controller) driver?

  Any suggestion?
  Thanx

  Hello

  You use the latest version of the BIOS?
  Please check if you need a BIOS update. Of course I read in a few discussions on the similar question of Win XP you use Win 7 but its value to check the update of the BIOS and U500 series.

  In addition, I recommend check you the power of Windows 7 options.
  Disable in the power profile that you use power saving HDD.

  Just a question:
  You use the option AHCI in the BIOS?
  As far as I know it of possible to use either a compatible SATA AHCI mode.
  AHCI must be used because this option would use full SATA performance.

• Satellite L875-13D - problem with the installation of the wireless card

  Hello

  I bought a Toshiba Satellite L875-13D. I installed Windows 7 Enterprise edition.

  I have a problem with the installation of the wireless card. I have downloaded the driver on Toshiba website, but it does not work. When I run the file .zip and .exe, nothing happens. In addition, there are several pilots: Athos, Intel and Realtek and I do not know what is mine... I test all the driver but same result.

  I have the same problem with Bluetooth driver that does not work too.

  Thank you for your help.

  > But it does not work yet for Bluetooth,... I have install the driver by the .exe from the Toshiba Web site but when I run the application, I have error that says missing tosbtapi.dll. I founded and downloaded and installed on budget3 and SysWOW. But after that, the installation is blocked. Any ideas?

  Laptop Satellite L875-13D isn t equipped with Bluetooth.
  Didn t you know who?

• Satellite P500-12D - a problem with the cooling system has been detected.

  Hi there everyone,

  I bought a Satellite P500-12D, which was a return of retail. When I start it up it runs a few minutes and then it appears on the screen:
  WARNING: A problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

  Follow the health of toshiba CPU is less than 50% temp and if it goes much higher that the cooling fan turns on and it lowers down and the fan stops again, I noticed that only the fan works r/h to cool the cpu, both should come together? What is a software problem?

  TThe unit is new without even the plastic off the surround screen or webcam. Any help or even point me in the right direction would be much appreciated, gary

  Hello

  Which program gives you this error message about the cooling system?

  Before contacting a service partner, as you can read in the error message, you must clean the cooling system using a jet of compressed air. Maybe dust blocking the fan or something else. Of more to clean up it of not necessary to disassemble.
  Here is an article on this topic: [how to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  If it doesn't help, contact the nearest service partner.

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.

• Problems with the installation of recovery - Satellite A300D - BSOD

  Hello

  The laptop in question (TOSHIBA Satellite A300D) recently stopped starting (BSoD).

  So, I tried using the recovery disk, but there is no help. What happens is:
  -After about 10 minutes of waiting, the first language menu load, so I click on "next".
  - Then I again click Next and accept the message that my HARD drive will be erased
  - Then I see a cmd prompt that says "try to remove all the letters of partitions possible...". »
  -There is also a minimized command prompt that says something like "RAID failed to initialize."
  -And then nothing happens.

  Is this a hardware problem? I also tried a full installation (instead of recovery), which, even once, is simply not. None of the errors is - it just freezes.

  Any help appreciated.
  Thank you.

  It is not easy to tell what can be the problem, but if you were not able to install the OS by using two different facilities CDs/DVDs, so there must be a problem with the HARD drive.

  The warranty is still valid?
  I mean you can contact the nearest Toshiba authorized service provider and explain the situation. They can swap the HDD and again test the recovery procedure.
  Can you get somewhere 2,5 SATA HDD for testing?