Problem with the input TextField line number

Similar Questions

• Problem with the input query mode. FRM 41009, 40301

  Hi all
  
  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.
  
  Now, I've wanted handled. So I created a trigger of error in order to handle the error.
  
  IF ERR_CODE = 41009 THEN
  NULL;
  END IF;
  
  A problem is that when you use the null value, it will not terminate the mode of input query, and then I get frm-40301 error.
  
  Second, it's that I can't use exit_form in a trigger of the error.
  
  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.
  
  Another solution would be to put the following code in the trigger when key pressed for each button in the form:
  
  If: system.mode = "ENTER-QUERY" then
  exit_form;
  end if;
  
  But I don't want to reproduce this code in my form.
  
  Please can you give me an idea how to handle this correctly?
  
  Thank you
  Michael
  
  PS: Version of the form = > ORACLE FORMS 10g (Forms [32 bit] Version 10.1.2.3.0)

  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.

  What is the code in the trigger of your button When-Button-Pressed (WBP)? Maybe you should check to see if the form is in the Mode query in your WBP rather than try and remove the error? In other words, eliminate error - do not delete it. :)

  If you want instead to remove the error, there is a technique to built-ins call restricted to a trigger that does not allow them. Do this by the use of a millisecond zero Timer. For example:

  /* Sample On-Error Trigger */
  DECLARE
    n_err_cd   NUMBER := ERROR_CODE;
    t_on_error TIMER;
    ZERO  NUMBER := 0;
  BEGIN
    IF ( n_err_cd = 41009 ) THEN
      /* Create Timer to execute Exit_Form() */
      /* to Cancel Query-Mode. */
      t_timer := Create_Timer('ON_ERROR', ZERO, NO_REPEAT);
    ELSE
      /* Handle all other errors here... */
    END IF;
  END;
  

  /* Sample When-Timer-Expired Trigger */
  DECLARE
    v_Timer  VARCHAR2(30);
  BEGIN
    v_timer := Get_Application_Property(TIMER_NAME);
  
    IF ( v_timer = 'ON_ERROR' ) THEN
      /* Notice, the timer name is case sensative! */
      Exit_Form;
    END IF;
  END; 
  

  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.

  Well, it's just standard features of Oracle Forms. If you switch the Mode request form - you must run a query or cancel the query Mode! This is how it works. Your users need to understand that and accept it - just as they accept the functional also for other programs. ;) Another option would be to add a "Cancel request" button to your form and make it so it is enabled only when the form is placed in Query Mode. Just a thought...

  I personally prefer to prevent the occurrence of an error rather than remove the error. :)
  I hope this helps.
  Craig...

• Problem with the input CLOB parameter

  Hello to all, I have a requirement where I need to create a query dynamically to insert data into a table that has a CLOB column. Here it comes when the input value is too long oracle gives me ORA-01704: string literal error too long even though I declared a variable CLOB (LS_sql). Same procedure works fine when the insert statement is not dynamic in nature. If I have to dynamically can someone please suggest me some options. Please see my examples below.

  CREATE TABLE NOTES_TEST(NOTE_TEXT CLOB);
  
  
  --Dynamic SQL throws error
  CREATE OR REPLACE PROCEDURE NOTES_INSERT
  (
         IP_note_text         IN    CLOB
  )
  AS
  LS_sql CLOB;
  BEGIN
  LS_sql := 'INSERT INTO NOTES_TEST(NOTE_TEXT) VALUES('||IP_note_text||')';
  
    EXECUTE IMMEDIATE LS_SQL;
  
  END NOTES_INSERT;
  /
  
  
  --Static SQL
  CREATE OR REPLACE PROCEDURE NOTES_INSERT1
  (
         IP_note_text         IN    CLOB
  )
  AS
  
  
  BEGIN
  INSERT INTO NOTES_TEST(NOTE_TEXT) VALUES(IP_note_text);
  
  
  
  END NOTES_INSERT1;
  /
  
  

  Thank you

  Shiva.

  You can (and should) skip the clob as a variable binding to help immediate execution clause.

• Problem with the fonts Textfield and dynamic device Flash CC

  Hello community,

  My problem is that I need to use for a "Device Fonts" project for dynamic textfields. With Flash CC several standard fonts are displayed not correctly, see photos. When I select "Anti-Aliasing for reading" for this textfield, when it displays the correct police.

  

  Anyone know the problem?

  If you want to use Arial Bold, embed (Einbetten..), this police.

  If you specify "use device fonts" for anti-aliasing, Arial Bold is prohibited when the published text is displayed.

  Adobe Flex 4.6 * using device fonts

• Update (Master al. CS6) master operation al. CS5.5 problem with the previous version serial number

  Hello

  I bought the the Master Collection CS6 in the Master Collection CS5.5 upfate. The CS5.5 Master Collection I bought an update in 2011. Since then, it works fine on my Mac. When you install the update of the CS6, I asking me to enter the serial number of the CS6. It is accepted, after a few seconds a windows appear that no product on my Mac was found to activate the update. I select the CS5.5 Master Collection in a drop-down list and you need to enter the serial number ot it. I got the serial number in "my Adobe" for the CS5.5 but this has not been accepted as a serial number for the CS5.5.

  Funny - the CS5.5 runs correctly with this serial number. What can I try to fix the problem?

  Click on the link to use the chat feature (after 'I still need assistance').

• Problem with the number of lines in the channel

  Dear community LabView,

  I'm relatively new to labview and I came across a problem that (I assume) can easily be resolved with your help.

  I need to create a digital signal to trigger a camera, but I have a problem with the configuration of my lines or exit lanes. I would not use that line output to trigger the camera. (I use a card NI PCIe-6353). LabVIEW is telling me that the number of lines in the channel does not have the number of rows of data:

  Possible reasons:

  Specified read or write operation failed because the number of rows in the data of a string is not the lines in the channel.

  If you use the digital waveform data type, make sure that the number of lines in the digital waveforms is the number of lines in the channel. If you are using Boolean data, make sure that the dimension of the array for the rows of the data is the number of lines in the channel.

  Number of lines in the channel: 1
  Number of data lines: 2

  Task name: _unnamedTask<11>

  How and why the number of data rows is connected to the resolution of my analog digital converter?

  I would appreciate your help! Labview code and a screenshot attached.

  Thank you

  Beff

  I got it to work by changing the "data format" "binary not signed" OR by plugging is not the "offset" for the Square Wave VI.  I think that the default "offset binary" data format works correctly if there is a negative value.

• Problem with the number of files?

  Hello guys,.

  I have a problem with the compilation of some projects...

  I realize that when my project 201 records in total (including the file config.xml, Active Directory and directory ext) they do not compile.

  If I delete all the files (if the project has 200 files in total), the success of occours compilation.

  See:

  E:\BlackBerry WebWorks Plug - in Eclipse\plugins\net.rim.browser.tools.wcpc_1.5.1.201010291444-22\wcpc>bbwp.exe "C:\Documents and Settings\Softwell\Desktop\blackberryhtml5.zip".

  [INFO]                  Parsing of the command line options

  [INFO]                  Bbwp.properties analysis

  [INFO]                  Validation of archive application

  [INFO]                  The analysis of config.xml

  [INFO]                  The application of filling source

  [INFO]                  Compilation of application BlackBerry WebWorks

  java.io.IOException: cannot run program ""E:\BlackBerry"(in the"C:\DOCUME~1\Softwell\CONFIG~1\Temp\widgetGen.4723774651307629071871.tmp"directory): error = 87, Parometro incorreto CreateProcess.

  [ERROR]                 CAP exception has occurred

  Can someone help

  Hello tneil,

  Well, I found the problem and a solution.

  The thing is: my project was not limited by the size, this is the number of files (200).
  I realized that BB has released an SDK 2.0 (I used 1.5) and I tryied to compile with the 2.0 and everthing works fine!
  The problem is how bbwp.exe communicate with rapc.exe, maybe he tryies to send files by command line and it has a limit. With the new sdk, it uses a file temp with all orders. This is why it works.

  The maximum size of 7MB, I can't say anything, because my apps are about 3-4 MB. But good to know, if I can put in my documentation.

  That's all.
  CYA

• I use an analog input on a PCI-6224 and are having problems with the clock source

  I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.

  That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.

  Single point NI the hardware is for PID control with a real-time operating system.

• Problem with the serial number and to purchase

  I have the problem with the reception of the letter with code or serial number. I bought a month ago creative cloud for the photographer and the payment made. A letter of confirmation. but still now series or code. Please help me with this

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  .

  On this computer, your cloud subscription correctly displays on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Problems with the Brush tool in Animate - chips of leaves or steps of the finished line.

  Noticed this problem with the Brush tool in Adobe animate - seems to leave a chip or stage of the race over each time that a line is drawn.

  Older versions of flash were perfect, no problems with the brush not tool at least.

  See the video for a demonstration of what I mean:

  Adobe animate (do Flash) - YouTube

  Toby

  Hi Toby,

  We have fixed this problem internally and the fix should be available with the next update to animate CC.

• I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because that box "email".

  I have problems with the form widget. When I created my forms, I need to leave out the line, one email because my client does not want the message line and two because those who have tried to fill the online form cannot submit because the 'email' box keep rejecting their email address valid. And I just tried to remove the line in my form and it does not allow me to delete or to mark it as not necessary either.

  Currently, there is no way around the field email forms of the Muse. Another option is to have a look at Jotforms or another third-party provider of shape that Muse has widgets for.

• Unable to contact the Service Adobe, I have a problem with the number.

  Hello

  I would like to have more information about the Adobe domain controller. My intention is to buy the product and use it in my office, we are a small company (4 PCs).

  If I am wrong, I have to take the standard networks for Business Plan, but I can't organize any request for payment for more information, because I don't have a problem with the number I'm supposed to call.

  Y at - it another way to know if this software is very suitable for me and my business and most of all the how much it will cost.

  Thank you for your attention.

  Good day!

  I look forward to hear from you.

  Best,

  Augusto

  Hi Avgvstvs67,

  Please see this link: https://acrobat.adobe.com/in/en/pricing/business-pricing.html

  Kind regards

  Rahul

• Lightroom 5, Mac. Problem with the Radial tool. Marquee lines disappear.

  5 Mac Lightroom. Problem with the Radial tool. I use this tool a lot. I have to hit a key by accident because between photos, renowned lines disappeared and I don't know how to get back them. Without the lines of text scrolling here I can't rotate or develop the radial tool.

  Press H on the keyboard.

• Error downloading Photoshop element 12: Arvato Berthelman - Download Manager error - unfortunately, there is a problem with the link to that file. This problem may be due to the number of users trying to download

  Error message when downloading Photoshop element 12: (I bought the license in a store)

  Berthelman arvato-

  Download Manager error-

  Unfortunately, there is a problem with the link to that file. This problem may be due the number of users trying to download the file, or the product may no longer be available. Please as minutes of a few in. If this privilege is still not available, please contact customer service at the address [email protected] or number 604-915-5200

  == > Les DEUX @ and phone number are fake!

  Hi Mireille56,

  The place where you are trying to download the software.

  [email protected] is not an email from Adobe Support.

  Please try to download Photoshop elements 12 of: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

  < translated="" via="" google="">

  Hi Mireille56,

  Where you are trying to download the software.

  [email protected] is not an Adobe support email.

  Please try to download Photoshop elements 12 from: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

• I have problems with the text... Help

  Hey

  I have problems with the text box in indesign cs4...

  When I do a text frame and write a short text and want to make a new line and press ENTER, my cursor goes to the next page and the small red cross in the corner of my document apears.

  someone knows what to do here?

  I realle need your help

  Thank you

  This has been covered a lot. A BIOS update may be an option to solve the problem of keyboard mapping, you can change your keyboard shortcuts to reassign the digital keypad input to be a paragraph return or you can try simply by changing the State of the numlock - if it is on, turn it off and vice versa. Withthis problem most of the systems that seems to change the function of the two keys back and forth between the enter alpha and entry number.