Problem with the right and on the left, click on touchpad functions

Similar Questions

• j105el envy: envy of hp can not right and made a left click at the same time

  my hp touchpad cant hp envy envy cannot not right and made a left click at the same time. I don't know if it's a driver. because of this I can not play games like GTA cause I need do a right click to aim and left click to shoot. is there a solution to this

  @gwatanaj ,

  Hello and thanks for the display on the HP support forums.  Here is a link that may be useful.

  HP laptops - use and troubleshooting of the TouchPad and ClickPad (Windows 8)

  What you are trying to do may not work with your touchpad.  Normally when it is best to use a mouse.  The hardware is built to be different and you might find it easier to work with.

  If you need help please post back.  First of all, check out this link.

  Tips for the "very best question.

  So, please indicate your model full and product number.

  I hope hear from you soon.

  Thanks again and have a great day.

• My photos will open VLC with the left click. Need to open context menu for images

  When I double left-click on the icon my images the VLC page is displayed in the upper left corner of the screen and nothing happens when I click on the arrow of VLC playback. The same thing happens with picture files.  I've never had this problem before and cannot find a "Restore Defaults" to return to normal. Help, please!

  HI Milton,

  Explore the My picture folder in your My Documents or navigate to the location of the image. Click right-> one of the image-> Openwith files select "choose program"-> select "Windows fax and picture viewer"-> Tickmark "always use the selected program..." -> Ok.

  You will be able to open the rest of the images using the left-click in the picture windows and fax viewer, if you use another program, you can select the program accordingly.

  I hope this helps.

• Does anyone else have a problem with the left speaker is much lower than the right?

  Any source that I use the left speaker is much lower than the left. If I put my finger on the right I can feel the pressure of air pushed but not by the left. Is it an iPhone defective 7?

  Hello, TopDog16!

  Welcome to congratulations on getting a new iPhone and Apple support communities 7.  From what I see in your post, you have any questions on the stereo speakers in your new iPhone.  I would be happy to help you with that!

  Indeed, your iPhone has holes on both right and left sides on the lower edge (on each side of the connector of the Lightning).  The holes on the right are only speaker on this edge of the phone, however.  The other speaker in the pair is at the top of the phone, where the cut is, just above the screen.  Check here to see if sound comes out.

  This page has a large diagram of the iPhone of 7 speakers (in the section entitled "Buttons and external connectors"): iPhone 7 - technical specifications

  Have a great rest of your week!

• Acer AS3810TZ I have problems with the left side of the screen

  It has fuzzy Strip on the left side of the screen of the laptop, it comes and goes as you fold the screen at different angles. Would that be the opposite Board or the cable between the laptop and the screen? Where is a good place online to get spare parts. Thank you?

  Thanks, I've done some research and there is a known issue on the net about Acer faluty components. My next laptop will not be an Acer!

  http://djcristi16.blogspot.ca/2011/07/Acer-3810t-LCD-backlight-broken.html

• Problem with the Satellite C850/c850D touchpad

  Hello

  I just bought a PC toshiba laptop c850/c850D this week, and the third day, when I was watching my touchpad mouse with chrome starts to panic.

  I could barely control the mouse with the touchpad, it kept "shooting up" at the top of the screen.
  I rebooted the system to get the touchpad working not all (mouse key on laptop included).
  When I plug in an external mouse via USB, it works very well.

  I tried the shortcuts F5 (turning the touchpad on the laptop market)
  I have the mouse controls. Where the mouse USB and the touchpad is visible. He said only that it works properly, which is obviously not.
  has taken a printscreen: http://i49.tinypic.com/2m4vebt.jpg

  I even went as far as restoring the computer to the factory settings by pressing f8 whilest reboot etc etc.
  The touchpad mouse doesn't always work...

  It works under windows 7.

  Could someone please help me understand how to get my touchpad working again?

  See you soon,.
  Toby

  Post edited by: junction box

  Hello

  The F5 turns the touchpad on and off
  Please check if the touchpad is not disabled.
  You can also visit the Toshiba UE driver page to download the latest driver for touchpad
  The update of the touchpad driver solves many problems of touchpad.

• nothing will be displayed except wallpaper and mouse. click right does nothing. can't even highlight something with the left click.

  It happened just in the middle of me using my computer. I tried ctrl + alt + delete and do appear in the Task Manager and it seems. So I restarted my computer, and sometimes the desktop icons will Flash for a second then Armelle. There is no status/start bar that appears... nothing. When I try to bring up the Task Manager, now, the screen goes all black. I tried to do system restore, and nothing works. It starts in safe mode, but doesn't let me do anything like you connect to the internet to try to do something.

  suggestions?

  Hi shannonfae,
   
  1. you remember of any change to your computer before the problem?
  2. What is the error you encounter when you perform the system restore?
  Search for related errors in the event viewer .
   
  If you start your computer in safe mode, it wouldn't work because safe mode does not connect to the Internet. You need to perform the safe mode with networking to connect to the Internet.
   
  Note: Some machines require an ethernet cable to connect to the Internet
   
  In addition, since you are able to see the icons on the desktop in safemode, I suspect involvement of conflict of software of third party causing the problem to occur. I suggest that you follow the steps mentioned below
  Method 1:
  Put your computer in a clean boot State, and check if you get the error code.
  Note : follow step 7 to your computer as usual.
  Method 2:
  Do the SFC scan on your computer and check if this is related to the missing or corrupted system file.
  Method 3:
  Create a new user account and check if the problem persists there.
  See also: http://windows.microsoft.com/en-US/windows-vista/Fix-a-corrupted-user-profile
  
  Aziz Nadeem - Microsoft technical support.

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• unexpected problem with the permission of type plsql function scheme

  Hello
  I created a schema authorization function plsql type returning a Boolean. Authorization scheme is for pages only. p2_user_priviledge is a textbox control on the home page that retrieves privilege (list of the pagenos) to the user of the database connection. Homepage has no required permissions. SCHEMA AUTHORIZATION always returns false. I am not able to trace problem in my code. same code works fine for failure to the 'c' of return area.
  
  -CODE OF AUTHORIZATION SCHEME-
  declare
  PageID varchar2 (10);
  VARCHAR2 (300) of privilege;
  c number (3);
  Start
  PageID: = ": P" | to_char(:app_page_id) |': '; -NUMPAGE stored in format *: P2: *
  privilege: = trim(:p2_user_priviledge); ++-List contain privileges like: P2:P13:P67:P23: etc +++ select instr (privilege, pageid) in c to double;
  If c > 0 then
  Returns true;
  on the other
  Returns false;
  end if;
  end;
  
  ------------------------------------------------------------------------------------------------------------------------------------------
  
  Another problem is again related to the authorization scheme.
  I created an application and schema of an authorization (auth_aug), which worked fine. Then, after a few days, I added more than 10 pages for the same application, but now autho_aug always returned false for new pages. Then I copied the code from the "autho_aug" to the new "autho_sept" regime, and it worked for new pages. I do not understand if code is the same for both system, why had to use two different schemas.
  Now, I've added a few pages more enforcement and problem mentioned earlier.
  
  any solution to the two problems...

  Hello

  You can create a component of demand through the shared components in your application, elements of Application option. All you do here is to create a new item and give it a name.

  Once this is done, the element can be used as if it were a page element. You can use an Application (also available through shared components) calculation to set the value of this element in the list of page numbers and the value can then be retrieved in a SQL statement or PL/SQL.

  You cannot use the popup window Session to change elements from page or application - you will need to create a calculation or process to do.

  Andy

• When I try to connect to hotmail and received the following message ' sorry, there's a problem with Hotmail right now Hotmail was not able to complete this application.

  Hi, I try to connect to hotmail and received the following message ' sorry, there's a problem with Hotmail right now Hotmail was not able to complete this application. Microsoft may contact you about any matter that you declare "what steps should I take as I have urgent e-mail to check." THX

  Hello

  Looks like a temporary problem.

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I work in InDesign CS5 and have a problem with the panels on the right. Some of them are empty. Ideas?

  I work in InDesign CS5 and have a problem with the panels on the right. the panels color chart, paragraph styles, and totally blank menus link. I pulled upward from publications that I already worked on and they are still virgins. I tried to load styles from other pubs, ID, and that does not work either. I can see them when I go to create a new style and use BASED on function.

  Any ideas?

  Try to restore your InDesign preferences. Here's how:

  FAQ: How to reset or 'trash' preferences?

• Folder opens in the search window and not file. left click and it opens in search right click then 'open' and it will open in the window of the folder. How can I open it directly with by clicking on the left button of the mouse

  I've created the new folder. When I left click it open in the search window.  If I right click on it, drop-down box and select open and it opens on the window of the folder as it should.  How can I get the folder to open in the right window when I left click rather than having to do the extra step by clicking on the right, and then open?

  Try this link:

  'Search Companion starts if you double-click a folder '.
    <>http://support.Microsoft.com/kb/321186 >

  HTH,
  JW

• Problem with the touchpad left click

  I recently posed some problems with my left click under the touchpad. The touchpad is very well when I scroll over it with my fingers, the cursor moves, the right click (it opens upwards) also works very well, but the left click is not responsive at all.

  I'm on a Toshiba Satellite L305D

  Hello

  1. What is the exact model of the laptop number?

   

  Method 1:

  I suggest you to check if the easy access in Windows settings are appropriate.

  You can specifically uncheck the Activate a window by hovering over it with the mouse to the title of the ease of access Center if activated.
  You can refer to the link below for more details on the same-

  http://Windows.Microsoft.com/en-us/Windows7/make-the-mouse-easier-to-use

  Method 2:Remove drivers touchpad from Device Manager, and then reinstall.

  To reinstall the drivers for the touchpad by uninstalling current drivers

  Sometimes, there may be driver errors that prevent the touchpad from working.

  a. Click Start; on the start menu, search type devmgmt.msc and press ENTER.
  b. If you receive a quick click, consent to continue.
  c. expand mice and other pointing devices.
  d. right-click on the component of touchpad and click on uninstall.
  e. once the uninstall is complete, restart the computer.
  f. download the latest drivers for the touchpad of your computer manufacturer website and install it.

  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• Two problems with the registry and Aero

  1. so I just follow the instructions on the Microsoft page at http://support.microsoft.com/kb/947215 on how to fix the error "the user profile service has no logon. I executer run in Safe Mode, follow the instructions in method 1, reboot and it worked again. After that things return to normal, I open the directory in the registry editor to see if anything changes. And Yes, because when I start Safe Mode and open the registry editor, I don't see that a file ends with .bak, however there are two. Is this a problem?

  
  2 I do not know if this has happened recently or a while back on my computer (the one with the same problem above), since I just noticed it. Usually on my other laptops, all the windows around is a 'border' like this:
  
  But some of the windows now appear when, will be absent this "frontier". Here are some examples:
      
    
  The above image (the stop a job), a border. But it is thin, and on the left side, there is more of a 'border' as the right and down side.
  

  I don't know what happened, but is there a way to solve this problem, because it does not concern normal like other computers?

  Thanks for any help.

  1. as long as you don't face any problems with the registration on your account, it is not a problem.

  2. Please run Microsoft Fixit from the following links and:
  http://support.Microsoft.com/mats/aero_effects_not_working/en-us
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
  http://support.Microsoft.com/mats/Windows_Display_Quality_Diagnostics/en-us
  If the problem persists, answer here.

• Problems with the movement of the front and back layers

  Hey everybody!

  I am very new to Flash, very very new to actionscript and basically, I started programming in general 2 days ago, and I have a problem with the layers in a project. I tried learning through books, but especially thanks to youtube tutorials, but I'm stuck here.

  Here is the .swf file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.swf

  And here is the original .fla file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.fla

  Two problems:

  1. I want maps to fly BEHIND the Logo, but in front of the shadow - so that it seems that the logo is original and the rest (maps and shadow) is in the back. I have 3 layers (Logo, Action, shadow), but no matter how to move around it do not go to the back...

  2. I would like to have a second fountain Let's say right left... can I just copy and paste the code? Seems similar is not...

  Can someone help me on this one? Pleeeeez ?

  Mike

  To create an empty movieclip you just select Insert-> new symbol and select movieclip and click OK.  Simply exit the editing for this movieclip mode by selecting Edit-> Edit the Document.  You now have a new empty movieclip in your library.

  With the desired layer selected, drag an instance of the movieclip in the library in the upper left corner of the stage and then give it an instance name of "mc" in the properties panel.

  I have no CS5.5, so I don't know if what I described in selecting is changed in the new design.