Problem with the synchronization in the book palette

Similar Questions

• Problem with the hierarchy palette...

  Is it possible to increase the visibility of items highlighted in the palette of the hierarchy? Never, I can't say that I chose because the highlight is also dark. I tried to adjust my monitor, but that was not good. Any ideas? Thank you!

  OK, so you need to change the color of 3D objects in the same place. This will also change the color of some parts of window - you will see on the preview image.

• I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

  I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

  Have you tried:

  Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

• Problem with the last 5 minutes of the audio book to cut

  My wife recently bought a Clip Jam for listening to audio books. She had a problem with the end of books - the device does not play the last 4-5 minutes of the last chapter of a book. IOW, it ends at the beginning. It must then go to the desktop PC and listen to the end of the book he (proving it is not a problem with the files themselves). She said that this happens on audiobooks, Audible and audio books, it is in MP3 format.

  Someone has an idea what can happen and how I can help him solve?

  using improved format audible AAX? IIRC: it is a problem only with improved AAX format. Use the Format 4 and that she must play to the end.

• Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup

  Windows Media Player version 11.0.6001.7010 with Vista. Problems with the automatic synchronization of music backup.

  Backup not working in all of these songs/albums that appear also in personal playlists. Does not account for all of the media/music in Windows Media Player. It is also not known where there are additional tracks from the same album, appearing in a personal reading list, these additional tracks (that is, it will take 2 album, but ignore the other 10). Has only begun to occur in 2-3 weeks.

  Previously, when I set up the sync partnership, there are options in playlists 'Sync' discovers the device Set Up, such as 'All music' 'All images' "5 * appreciation of music" etc. None of them showing now also available. Offered only my personal Playlists. All solutions?

  Hi Phil,

  Thanks for posting your question in the Microsoft Community forum. I understand that you can't auto sync in Windows Media Player. I'll help you with this problem.

  Before troubleshooting, provide us with information.

  1. don't you make changes to the computer before this problem?

  2. have you updated to Service Pack 2 installed?

  3. don't you make changes to the computer before this problem?

  This problem may occur if there is an inconsistency in the system files related to Windows Media Player. Follow these methods:

  Method 1.

  Solve problems in Windows Media Player: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-problems-in-windows-media-player

  Method 2.

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Click View all, and then click the Windows Media Player settings.

  Method 3.

  You can try to disable and enable the Media Player Control Panel.

  Steps to disable Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and uncheck the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Steps to activate the Media Player.

  (a) click the Start button, select Control Panel, click programs and then click turn on turn Windows features on or off. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (b) to develop media features and check the box next to Windows Media player. Click on ok and wait a few minutes to complete. Once this is done, restart the computer.

  Method 4.

  You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Security Scanner warning: there will be a loss of data through an analysis using the Microsoft safety scanner to remove any viruses found.

  Additional information.

  Set up a device to sync in Windows Media Player: http://windows.microsoft.com/en-US/windows-vista/Set-up-a-device-to-sync-in-Windows-Media-Player

  Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-us/windows-vista/windows-media-player-sync-frequently-asked-questions

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• Problem with the composition of the corporate directory / phone book (E.164)

  Hello

  I have a little problem with the composition of the cucm phonebook integrated telepresence system. I can search the telephone directory, and it displays the user. The format is E.164 number, but with spaces in the number of empty? And for me, it looks like telepresence system trys to deal WITH areas because if I compose without space market. So it seems it is not the phone book to a good number E.164 number.

  any ideas?

  Concerning

  Jason

  Hey Jason,

  Looks like it's still an open caveat on the current software for MX, EX, endpoints series E20 and C sq.

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/software/TC5/Release_notes/tc_software_release_notes_tc5.PDF

  CSCtz87452:

  MX, EX, E20, C and SX Series endpoints cannot use directories CUCM with numbers, including spaces.

  Thank you, Adam

• Problem with the iPad using kindle app.

  WE have 2 iPads, iPad 3 and the air of aniPad. Nor are working using the kindle App freezes and looks like he's trying to download or open a book. Which of the two in the lower part shows also cloud and who is on the side of the unit?

  Amazon made the kindle app, not Apple.

  If you have problems with the app-contact Amazon Kindle.

  http://www.Amazon.com/GP/help/customer/display.html?nodeID=200298460

• problem with the 3/square icon on my iMac keyboard key.

  I have a problem with the 3/square icon on my iMac keyboard key. The icon of Fund will not work, I just get # when I use the up and down arrow to the left of the keyboard. A lot of ideas, everyone please?

  I just see the same question and the answer is the book symbol is alt + 3, I have a US keyboard. I wonder why that is? I bought my iMac to John lewis to the United Kingdom. Anyone have the answer for me please?

• Problems with the product key

  I have a mac book pro which has a partition with windows 7 pro (I SOUL, in the way that you need to restore the computer whenever you need to use the window). I installed fusion 3 for both systems without having to restart. I deleted the partition and tried to reinstalled the window. now, I have a problem with the product key, what can I do?

  Hi Lumareli,
   
  What is the error you get when you enter the product key?
   
  If you have difficulties to activate Windows 7, open the Windows Wizard of Activation in Windows 7 to use the phone and activate Windows:
   
  Try this and wait for a real person and explain what happened:
  
  a. Click Start, then in the Find box type slui.exe 4
  b. press enter on your keyboard.
  c. Select your country.
  d. Select the telephone activation option, then call and hold to a real person.
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Problem with the sync audio to video when you use Windows Movie Maker version 6.0

  I have a HP Slimline Pavillion S.3220.uk PC, using Windows Vista Edition Home Premium. I have problems with the audio video synchronization when using Windows Movie Maker, version 6.0, I 'get' raw AVCHD files to .wmv using voltaic HD.  I've noticed that the audio and video are out of sync, ONLY after the first thumbnail.  No indirect problem with videos, but when people talk to the camera, in case of DISASTER, as he is out of sync. I tried to reduce the resolution of 720 p and 540 p, and no solution to the problem. Any thoughts on the matter please?

  Hi Fabian119,

  Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.

  There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player (for example, a file compressed with the DivX video codec or the Ogg Vorbis audio codec). Because the player is extensible, in many cases you can download the necessary codec on the web for free or for a fee.

  You can visit the following links for more information on codecs:

  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  You can also view the following link to download the audio file conversion programs and check if you can convert AVCHD to Mpeg.

  Convert music, videos and photos from one format to another

  http://Windows.Microsoft.com/en-us/Windows-Vista/convert-music-videos-and-pictures-from-one-format-to-another

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 4320 proBook s - problems with the wireless Assistant

  Hello

  I have my ProBook s 4320 for about half a year now. For most of the year the half I had problems with the wireless assistant - it seems that when I start my laptop it takes about 5 to 10 minutes before the work of the internet. I never changed any settings in the wireless assistant.

  Nobody does face these same questions and no one knows how the internet starts immediately when I start my laptop? I tried this on different places with different wireless modems, but everywhere, it's the same thing and books of other people can use internet immediately.

  Thanks in advance

  Hello

  You are welcome to help

  The fact that it connects properly in Mode safe indicates that the driver who normally starts with Windows or a program is causing the problem - most likely candidate is to begin by F-Secure.

  Before attempting the following procedure, make sure that you have an installation of F-Secure program, so you can re - install this software, and also a license key necessary to activate it.

  Then, from the windows control panel. Open programs and features, click on the entry for F-Secure once to highlight, and then click the option to uninstall at the top of the window.  Once done, restart the laptop.

  Again, when windows restarts, check the internet connection by using only a known secure site.

  Let me know how this affects the problem.

  Kind regards

  DP - K

• "Détarer" problem with the Torch 9800/Device Simulator

  Hello everyone,

  Im a very strange problem with the Torch 9800 (OS 6).

  I have an application developed with 5.0 SDK. Throughout the process of synchronization of this app, there is a point he gets a. tar.gz file that is unziped. For this purporse (in fact, the tar part / "détarer"), we use a tar / "détarer" 'library' we found here in the forum (http://code.google.com/p/j2metar/). This library works fine in all phones with OS 5.0 that we try and even on the simulators of somo 6.0.

  But there seems to be a problem with the torch. During the uncompress, there are an exception, because what is the reading of the structure of the tar (from the industry), load the bytes that are invalid, corrupt, dirty, memory, and it fails.

  The strange thing of all is that if I have only the routine détarer to the file (in the torch), it works! But when I run all my sinchronization, which open and close httpconnections and process the file on some points (sometimes the same point, others of different) fails.

  My question is... are at - it a known bug, issue, etc. with the BONE of the torch (touch device)? Of course, the first thing that jump to mind is "my code is incorrect, memory leaks (in Java, but perhaps odd that a stream was not getting close properly)" and so on, but I can't seam to find the problem. And like I said before, this application works fine with the same file tar.gz in other devices like the 8520 OS 5, 9780 OS 6, 8900 (OS 5).

  IM completely stuck with this problem and any help/test will be greatly appreciated.

  Here some code, the method that makes him détarer and calls the détarer/tar library:

  public static boolean "détarer" (String tarFileUrl, String destUrl) bird Exception {}

  FileConnection fconn = null;
  FileConnection tarFileConn = null;
  TarInputStream tis = null;
  Boolean bRet = false;

  try {}
  fconn = (FileConnection) Connector.open (destUrl, Connector.READ_WRITE);
  If (! fconn.exists ())
  fconn.mkdir ();   Create the folder if it does not exist
  fconn. Close();
  fconn = null;
              
  Create a TarInputStream
  tarFileConn = (FileConnection) Connector.open (tarFileUrl);
  TIS = new TarInputStream (tarFileConn.openInputStream ());
  tarFileConn.close ();

  Entry TarEntry;
  int count;
  data Byte = null;
              
  While ((input = tis.getNextEntry ())! = null) {}
  Count = 0;
  data = new ubyte [2048];

  fconn = (FileConnection) Connector.open (destUrl + entry.getName (), Connector.READ_WRITE);
  If (! fconn.exists ())
  fconn. Create();   create the file if it doesn't exist
  else {}
  fconn. Delete();    Create a new
  fconn. Create();
  }

  OutputStream os = fconn.openDataOutputStream ();
                  
  While ((count = tis.read (data))! = - 1) {}
  OS. Write (data, 0, count);

  }
                  
  OS. Flush();
  OS. Close();
                  
  fconn. Close();
  fconn = null;
             
  }

  TIS. Close();
  TIS = null;
              
  bRet = true;
              
  } catch (Exception e) {}
  e.printStackTrace ();
  throw e;
  } {Finally
  try {}
  If (tis! = null)
  TIS. Close();
  If (tarFileConn! = null)
  tarFileConn.close ();
  If (fconn! = null)
  fconn. Close();
  } catch (Exception e) {}
  }
          
  Return bRet;
  }

  Thank you!

  Santiago.

  Hello

  It is a problem with the OS 6.  I've posted about this before here:

  http://supportforums.BlackBerry.com/T5/Java-development/reading-and-writing-file-on-torch-9800/TD-p/...

  Basically, corruption may occur if you write to the stream simultaneously in different threads.  The solution is to ensure that a single file operation is occurring at a given time.  Some people have had the chance to control the size of the buffer to something as a multiple of (64 * 1024)-1. e.g. 65535.  In addition, you can rinse after each write to the buffer.  I have had no luck with this, but others.  If you look at the bug in JIRA, there is also no activity on this:

  https://www.BlackBerry.com/jira/browse/JAVAAPI-1513

  Good luck!

• Problems with the WEB BROWSER blackBerry Smartphones, use not wifi network to open some Web sites

  Hello I'm owner of BB BOLD 9900 OS 7.1... for the last two days I am facing a pretty annoying problem with the BB browser.

  It means not affects the device... it just annoys me.

  When I TURN ON my WiFi on my BB with the network carrier Sim already homepage active who has a Active on it and open the web browser BB, according to the website on which I open the web browser chooses between the internet Wi - fi OR internet BIS carrier which is weird. BECAUSE a default if the wifi is enabled, then the web browser MUST use internet wifi network carrier for navigation. YOU TUBE, FB and TWITTER.com all use my carrier netwrok to open bt soon I open BBC.com or CNN or any other site the wifi symbol appears on the right side and so it uses the wifi network... and disappears when I opened THE 3 SITES you tube FB n twitter.

  My knowledge is that when you activate THE wifi network, the WEB browser is intended to USE the wireless internet, NOT the internet carrier

  The next time I switchd off the the carrier signal, and then Turned ON one internet WI - FI and then opened the web browser of BB. so now all the opend website with wifi internet bt as soon as I open YOU TUBE or FB or TWITTER.com it post a comment... .that cannot visit the web page when the carrier is off. Please turn on the radio n try again... I mean IT SHOULD OPEN with internet wifi? WHY do network carrier sim to open the web page?

  I have checkd my browser settings and they are default and also my wifi settings I have reset the... the problem still persists?

  any idea wats going on?

  Please help is needed I'm annoyed about this problem...

  Thank you

  MR. KIWI... Good news... .i went to my carrier service center... Solvedo Problemo!

  Go to your service books and remove directories of service WAP browser in all directories of service WAP 3 I don't know the exact name, but all are related to the browser... WAP config something like dat... Just remove dem... .and HARD restart your fone... and try to use only wifi on your device with your carrier network off...

  mine worked... Let me know on urs... so now, the browser uses my wifi instead of my network provider when both are running...

• I have a problem with the Narrator, repeating words and phrases.

  original title: NARRATOR in WIN7 SUPPORT

  I use windows7.  The annoying Narrator sometimes voices repeat words and phrases.  I also need help, change of voice and using Narrator to read aloud my text book I downloaded.  It is in PDF format.

  Original title: Narrator sometimes repeat words and phrases

  Hello

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the Narrator, repeat words and phrases. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) exactly where you run the Narrator?

  (2) the Narrator extends from a particular document?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method-

  I wish that return you the items for assistance-

  Narrator doesn't read what I expect him

  http://Windows.Microsoft.com/en-us/Windows7/Narrator-doesn

  Hear text read aloud with Narrator

  http://Windows.Microsoft.com/en-us/Windows7/hear-text-read-aloud-with-Narrator

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Problem with the swap fill and stroke

  Hi guys, I am trying to use the brush to draw lines with Illustrator, but I'm having some problems with the button fill.

  The problem is that when I chose a color fill and a stroke color, let's fill: orange and stroke: black, when I apply a coal with the brush, the colour for filling automatically changes none. Change the line color does not occur, because it maintains the same color.

  If the thing is that the fill color changes automatically zero against any color that I select.

  Any suggestion to solve this problem?. Thank you

  Double click on the Brush tool in the tools palette and switch: fill a new brush strokes.

• Creative sync cloud app. problem with the web application

  Hello

  I have some problems with the synchronization of files in the creative Cloud Files folder on my computer (I use a Mac) and the Creative Cloud Web App. practically the files I have on my computer folder do not appear on the web (and I can't create links of sharing for them) and vice versa. We have a team account and we can exchange files between us, but nothing appears on the web application. The problem applies to all members of the team.

  There is a problem with the service or it could be a local problem?

  Thank you

  Florin

  @ursuss - what you see in the creative Cloud Files folder on your computer must match what you see on the site Active CC to https://assets.adobe.com/files.

  Use the collector for the Adobe Log tool to https://helpx.adobe.com/creative-cloud/kb/cc-log-collector.html and newspapers as well as the explanation of the problem by e-mail at [email protected]. Please provide additional information indicated by Warner Harress in this Adobe forum post https://forums.adobe.com/message/8385752#8385752.