Problem with 'treat multiple files' quality?

Similar Questions

• Problem with "process Multiple Files.

  I use Photoshop Elements 7.0

  Here is a discussion about my problem and three jpg files to show the problem.

  I use quite often the function of "process multiple files. Today, he has developed an error that I can't solve. This problem is the following.

  I chose a directory source for example < rawphotos >

  I chose a destination for example directory < rawphotos/JPEG >

  I then choose "convert files: JPEG Max quality", then click on 'OK '. This is the process I always used.  . . . Refer to capture1.jpg

  PSE 7.0 seems to start to process the first file, but when it does, it leads to a screen "save under" want me back up files is the PSD format.  . . . Refer to capture2.jpg

  This never happened to befrore and I can't get rid of it. If I try to cancel in the box, it simply led to an "error" box telling me that the order has been cancelled... Refer to Capture3.jpg

  I tried to look for previous topics on for one, but not avail.

  Any ideas how to solve this problem?

  Check the raw converter. If you have to be converted to 16-bit, you will not be able to convert to jpg. Set it to 8 bits and see what happens.

• Treat multiple files does not?

  I'm if worried, I have a customer photo to deal with and when I use the "treat multiple files" and I click on the folder that I need all images are grayed out.  I'm short on quick time, anyone have any ideas?

  Your using photoshop elements 13 on a mac?

  What you describe is the expected behavior when you select a folder of images to process, because you just want to select the folder with the images, not to select the images inside.

  In other words, for the Source folder, you just select the folder, not the images inside.

  The pictures inside will always be gray.

  Just to give it a try to see if it works.

  https://helpx.Adobe.com/content/help/en/Photoshop-elements/using/opening-files.html#Proces s_multiple_files

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• Problem with the executable files

  Hello all, I need a help from you...

  I use LV 2009 SP1 Professional Development Suite on Windows Seven and I have a problem with the executable files, a problem that I have ever found with other versions of LV (8.x, for example) and I'm a little surprised...

  In the attachment you will find an example of what I mean.

  There are two base screws, the main one (prova) and a Subvi (provasubvi). The main vi launches the Subvi and the Subvi simply create a chart. As you can see on the screws works fine, without any kind of problem.

  I also created the exe file, without specifying that no particular option... and 'magic' of the application does not work as I want. In particular, it seems that the Subvi is running, but the front panel will not be accessible.

  I also try to play with the Subvi construction structure and options, but nothing change.

  Did you ever solve something like that?... I would say that I thank you in advance for any suggestion...

  Andrea

  Hello andrea,.

  Looking at your project I've heard that you do not include the Subvi during the build of the project. SO I slightly modified. Please find the attachments.

  Thank you and best regards,

  srikrishnaNF

• problems with. ARW files and invigorating auto

  problems with. ARW files and invigorating auto

  I'll try to explain this, because this has happened in past and never found a way to solve, but I lived with it

  now that I have a Sony A7R the problem is more serious

  First I'm proud he realize the image in camera, I use DRO lvl 5 to get enough light, as when I'm shooting at dusk. DRO desire to do HDR but in a single file, it lightens the dark colors. in my camera, I'm happy with the results

  but when I download on lightroom, they come out almost black.

  Let me explain

  Let's say I have import 100 images

  I'll double check my preferences and everything is turned OFF when you want to import options, there is no auto toning, nothing.

  import the images I see glimpses in miniature that looks very good.

  I double click on one to enlarge, we go out so grid view.

  for a short 1 or 2 seconds, I see the full image in all its glory but that lightroom is doing something funny, it darkens the image

  an as she inspects every image, it was a DRO picture, it's too dark.

  to make this clear, the image is perfect, as it was in the beginning but after a few seconds, lightroom for some reason some think should be corrected.

  How we prevent lightroom to do this, I want the image exactly as it is, why lightroom must apply a correction >?

  I think we should do something with the interpretation of the raw file and lightroom applies its own algorithm.

  but here is what I get... until lightroom makes the change that I am able to testify the image exactly as he took and want unchanged...

  now, I have to edit each file or find a profile to which is added the work.

  any ideas how to prevent the ruin my lightroom images and just leave them as they were during the first time...

  There are 2 phases... it is when it imports initially and they look very well

  second are analysis each image and application of some type of toning that it darkens too.

  Thanks for the help

  Sorry, it's the yahoo email auto-reply message.

  I've now disabled

  thing is, there is no DRO jpg to download from the camera

  his only ARW. so my understanding is when I use the DRO setting, the camera makes changes to the ARW lightroom this bed somehow the ARW.

  but he comes back and unfortunately no DRO setting.

  because I noticed that if I take a normal image in his dark raw mode but if I apply dro to it, it comes out more bright, yet when I d/l the camera image in lightroom, which is an ARW - there no jpg files. Lightroom decides to BUMBLE

  So actually there is no interest to use DRO because when I download lightroom deletes.

  is there a way to tell lightroom to preserve the jpg preview as seen first.

  his right blade, image appears perfect... that lightroom do something, that bam, its ruin.

  What should I do to prevent ruin the image of lightroom? If it was good in the first place.

• Problems with the audit files!

  Hi friends,
  
  We are facing a problem with the audit files we have a runnning on oracle 10g server and being an Institute of teaching many ppl to connect to the server and too much work with SQL and PL/SQL. We have disabled the option to audit the database, but the audit files grow enormous in size. May I know what can be the problem and how to fix that there could be something that we would have missed.
  
  Kind regards
  Maury

  There is no setting of "verification". Display the values of

  AUDIT_FILE_DEST, AUDIT_SYS_OPERATIONS, AUDIT_TRAIL.

  I don't know 'NULL' as the value for each of these parameters.

  Werner

• Problem with loading multiple external xml files

  I have a table named 'source', which consists of names of files external xml, the content of which I'm loading in another table called 'content '. I tried with the following text:
  
  ----------------------------------------------------------------------------------------
  for (i = 0; i < source.length; i ++) {}
  XML_URL = "' http://localhost/temp/ ' + source ;"
  myXMLURL = new URLRequest (XML_URL);
  myLoader = new URLLoader (myXMLURL);
  myLoader.addEventListener (Event.COMPLETE, xmlLoaded);
  }
  
  function xmlLoaded(evt:Event):void {}
  Content.push (myLoader.Data);
  }
  ---------------------------------------------------------------------------------------
  
  The problem is that in this way, I get that content of the last xml file and other items ' content ' are 'undefined '. Anyone know the solution to this problem or maybe another way to do this?
  
  Thanks in advance

  I tested the following with two xml files in the same folder (I would try the same thing) and put their names in the table source. Create two dummy xml for the test files.
  Here is my exact code (I've changed, I have one because it's italicized here in the forums):

  var content: Array = new Array();
  var source: Array = new Array ("media1.xml", "media2.xml");
  for (var a source) {}
  var XML_URL = ' "+ source [a];
  var myXMLURL = new URLRequest (XML_URL);
  var myLoader = new URLLoader ();
  myLoader.addEventListener (Event.COMPLETE, xmlLoaded);
  myLoader.load (myXMLURL);
  }

  function xmlLoaded(evt:Event):void {}
  Content.push (evt. Target.Data);
  if(Content.Length ==source.) Length)
  TR();
  }

  function tr() {}
  trace (content);
  }

• problem with opening pdf file of the web browser

  I have Acrobat Pro ver 6 and Adobe Reader 9.1 on a computer.  When my user tries to open a pdf file from the web as it gets the following error message:

  "Adobe Acrobat/Reader that not running to view the PDF files in a WEb browser.  ADBE Acrobat/Reader version 8 or 9 is required.  Quit and try again. »

  What also happens is that Acrobat Pro 6 worm opens and nothing is there.

  I don't know why he received this message from Reader 9.1 is installed.

  One can shed some light on this for me.

  This user must have Acrobat and Reader on its system.  I understand that there are problems with having both.

  It has also set up so that any PDF opens using Reader 9.1.

  Thank you

  Configuration of your PC drive by default for embedded PDFs has become confused, because of multiple solutions of Adobe PDF documents installed on a PC.

  Solution 1:

  Go to start > run

  Type regedit, and then click OK.

  Navigate to the following key: HKEY_CLASSES_ROOT\Software\Adobe\Acrobat\Exe

  Make sure that the correct default data value is set to the path where are installed the Adobe Reader or Acrobat.

  The default installation values are:

  "C:\Program 9.0\Reader\AcroRd32.exe Adobe.

  or

  "C:\Program Files\adobe\acrobat 6.0\acrobat\Acrobat.exe" (not sure of this path.  Make sure that on your PC)

  If Adobe Reader or Adobe Acrobat is installed.

  Solution 2:

  Configure the browser to use Acrobat or Adobe Reader as a helper application.

  If you use Firefox to browse the web, you can change this setting in Firefox by clicking on:

  Tools > Options

  Click on the "Applications" tab

  The first item in the list should be "Adobe Acrobat Document".  In the Action list, click the drop-down arrow and select the application you want to read a PDF file in the web browser.  Click OK and you should be done.

  If you use Internet Explorer to view a PDF file, try the steps below.

  After you configure Acrobat or Adobe Reader as a helper application, the browser starts the helper application in a separate window and displays PDF files within this window. Acrobat and Adobe Reader both include a preference that allows you to specify the Acrobat or Adobe Reader as a helper application.

  To configure Acrobat or Adobe Reader as a helper application:
  Start Acrobat or Adobe Reader.
  Choose Edition > Preferences.
  Select Internet on the left.
  Deselect Display PDF in browser using [Acrobat application], and then click OK.
  Quit Acrobat or Adobe Reader.
  The next time you select a link to a PDF file in the browser, a dialog box asking what you want to do with the file. If you select open, the browser opens the PDF file in Acrobat or Adobe Reader (request for assistance); If you select save it on the disk, the browser saves the PDF file on your hard drive.

• Problem with the RTEXE file on PXI system

  I have attached the image of the comic to a very simple code that illustrates a problem with a file RTEXE on PXI system.

  If the VI (LabVIEW 2011) is started on the target of the RT of a LabVIEW project, no problem.

  If the code (with the shared variable linked to a typedef of indicator I32, lvlib being on target and ctl files) is compiled and run in starting my PXI system, it does not (message = "bad state" or something equivalent in french)!

  But when the shared variable is disconnected the typedef, the RTEXE file runs correctly in starting...

  No explanation for this strange behavior?

  A way to execute a RTEXE file on a PXI controller with shared variables typedefs?

  Thanx & BR,

  HL

  I have an answer on the french section of the forum: it's a LabView2011 bug, fixed in LabVIEW2012.

  LabVIEW2011 the only solution is to disconnect the shared variable the typedef

  Kind regards

  HL

• Problems with IMAQ write file.vi

  Hello, I am new to the community, and I have some problems with a Labview program, I received from a colleague. The program is written in Labview 8.6 and control (Guppy 160 b & w) camera and one-step translation. The camera is supposed to take 2 pictures in grayscale when the scene is in a certain position. Bmp images are safed using IMAQ writeFile.vi. For the configuration of my colleagues, it worked, but I get the following error message:

  "Error 1074396080 occurred to IMAQ Write queue.

  Possible reasons:

  IMAQ Vision: Invalid Image Type (Hex 0xBFF60450). »

  and the files that are written are empty.

  There is also no information using Labview extended regarding the IMAQ writeFile.vi. I found IMAQ 2.vi writeFile, but use it I get the same error as before. I don't know what to do. Can someone help me? Thank you in advance!

  Lemarié

  PS: You'll find an overview of the program (with the writeFile 2.vi IMAQ) in the attachment.

  see this

• I have problem with a .iso file that when I want to use I face the error "the file name is too long.

  Original title: name of a file

  Hello

  I have problem with a file .iso that when I want to use I'm dealing with error "the file name is too long" and I can't use this file anywhere for example: vmvare ' untraiso and even if I cannot write to cd or make a boot USB.

  I don't know how fix it.how I rename the file iso, shorter that I can use?

  Please help me.

  Thank you.

  Right-click on the ISO > rename > give a short name

• Problem with fixing XP files permissions

  Hi all

  I am having some problems with the permissions of the files on my Windows XP laptop. The crux of the problem is that I can't copy/move/delete some files even if ownership and file permissions are all correctly. Even within a directory, some files I can move/copy, but others I can't. The files in question are my Outlook PST files which I am trying to back up manually.

  I tried to play with file ownership and permissions. Used the account admin machine, all to nothing does not. There is no file open file handles, I can not simply copy them. It's all very strange and hope someone can suggest how I might be able to gain control of these files again.

  Thank you.

  Mark

  Please describe your problem in detail. Include the full text of any error messages you see. Tell us the brand and model of the PC and what version of XP (Home, Pro, or MCE) runs as well as the Service Pack level.

  Outlook PST files can only be saved when Outlook is closed.

  Also, it is unlikely, but do a right click on the PST file, select properties from the context menu, and uncheck the 'Read only' if it is checked. Click OK

  Hope this helps

  Post back if necessary

  ____________________

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the quick answer

• Problems with Skype's sound quality.

  Original title: I tried to use the skyp sistem to speak with my family in Colombia, but the sound is terrible. Very well, I can't speak. I wish bady help me, thank you.
  I'm away to make phone call with Skype, but the sound is terrible, thanks

  Hello

  You can try the steps of troubleshooting provided in the link below to solve the problems with the sound quality of Skype.

  How to get the best sound quality on Skype calls

  http://www.Skype.com/intl/en-us/support/user-guides/call-quality/

  For further assistance, you can get in touch with Skype support

  https://support.Skype.com/en-us/

• Problem with the INF file trying to replace the USB mouse

  I am trying to replace a USB mouse that works but sometimes gives me double clicks rather than alone. But all the attempts to have it translated into the same error viz:

  "The driver for this device is missing a necessary entry, maybe it's because the file INF was written for windows 95 or later." Contact your hardware vendor. »

  The mouse I'm replacing is an optical mouse of Trust and so far I have tried 3 other optical mice - an ASDA brand, a Dell and a Logitech Value Optical Mouse. All with the same result.

  All the mice tried claim to be plug-and-play compatible with Vista (Home Premium installed). None came with the drivers and the last Logitech there is no download associated with it - I don't think this problem of the manufacture.

  Any ideas anyone?

  Old Man River,
  Thank you for visiting Microsoft Answers community forums.

  To run the checker system with administrator rights files follow these steps:
  Click Start and type cmd in the box start the search.
  Right click on cmd in the list programs, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  At the command prompt, type the following line and press ENTER:
  sfc/scannow
  When the analysis is complete, test to see if the problem you are experiencing is resolved.

  If that does not resolve your problem, try going into Control Panel configuration, Device Manager, expand the device of Interface Group.  Right click on all of the mice that appear there and uninstall.  Restart the computer and that he should find Windows driver and install it.  If it is not the case, go to Device Manager, click the view menu, click Show devices and see if there is an other mice which do not arise before.  If so, delete them and restart again.

  Please let us know the status of your question.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.