Problem with update of table...

Similar Questions

• Problem with update of table (using the subquery to retrieve value)

  Hello
  I update a table based on the value of the subquery.
  Here's the update statement.
  
  UPDATING temp xm
  SET xm.col1 = (SELECT DISTINCT col1
  Of
  (SELECT col1, col2 COUNT (col2)
  FROM table2
  WHERE col1 = xm.col1
  AND col2 = xm.col2
  GROUP BY col1)
  where col2 in (select... in the table3)
  )
  WHERE xm.col5 = < value >
  AND xm.col6 = < value >
  
  When I run this statement I get following error.
  ORA-00904: "XM". "" Col1 ": invalid identifier.
  
  Can someone help me why I get this error?
  Why doesn't the main table alias in the subquery?
  
  Is it possible to avoid this / re - write the query in a different way?
  
  Thank you
  
  Published by: user552703 on November 2, 2009 20:42

  You can nest only 1 level deep (referring to the table to be updated).

  Have you looked at using the MERGE command? It is "easier" perform updates of this nature, assuming you are using a recent version of Oracle (9 or MORE).

• problems with update iOS 9.3 car bluetooth

  problems with update iOS 9.3 car bluetooth. break and cannot hear the caller voice calls.

  In what seems to be the same problem, this AM. iPhone 6, iOS 9.3, its stock of 2012 Honda Odyssey system. Worked well with iOS 9.1. With iOS 9.2 bluetooth would be occasionally disconnect, then reconnect about 5-10 seconds later. Reset all the settings bluetooth both phone and car with no improvement.

  IOS installed 9.3 last night. Phone connects, but the audio is unintelligible. Sound cut about every quarter of second, then reductions for about a quarter of a second, ad nauseam. Reset the phone without effect. Will try other things later today, but the phone is unusable with bluetooth, as is.

• Problems with updating creative cloud to desktop. (error code: 2)

  Problems with updating creative cloud to desktop. (error code: 2)

  Hi Mike,.

  You can follow the article: error: "unable to install". Creative Cloud Desktop that will help you get your number sets.

  Alternatively, you can follow the thread: Creative Cloud desktop could not be updated. () Error code: 2) where this issue is already addressed.

  Let us know if it works or not.

  Thank you

  Yann Arora

• Problem with update of Photoshop, Illustrator and Indesign CS6

  Hi all. I have problem with update of Photoshop, Illustrator and Indesign on OSx 10.8.4 CS6. Application are OK but update (bug fixies) does not work. Update failed. (U44M1P7)

  Hi El Gondo,

  The following could explain and help solve the problem...

  U44M1P7 - updates:

  http://helpx.Adobe.com/Creative-Suite/KB/error-u44m1p7-installing-upda tes-HYPERLINK

  U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS:

  http://helpx.Adobe.com/Creative-Suite/KB/unable-apply-extension-manage r - update.html

  Thank you!

  Ankit

• Problem with update of a column by using the procedure of database and refreshing or put in value programmatically

  Dear all,

  I am a beginner in the ADF and am under Jdeveloper Studio Edition Version 12.2.1.0.0.

  I have a page that consists of two taskflows.

  First workflow has a fragment which is to have a table based on view object salespersons (not editable)

  Second task flow contains a form of ADF from the same view object Salespersons.

  As the user selecting a line in the table of the same record is displayed as no problem.

  Now, I have added two buttons Activate and Deactivate that is to change the status of the sales.

  I tried to use two ways an updated using the procedure of database and then put in value by programming and I have different questions with two of them:

  Now, here's the code of the Java bean for activation:

  Option A - the problem with this is the value of the column in the list (the first task rate displayed) is not synchronized

  and Activate and Deactivate buttons are not disabled and active properly.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  Links BindingContainer = getBindings();

  OperationBinding operationBinding;

  operationBinding = bindings.getOperationBinding ("changeSalespersonsStatus") (OperationBinding);

  operationBinding.getParamsMap () .put ("pId", vId.getValue ());

  operationBinding.getParamsMap () .put ("pStatus", "A");

  Object result = operationBinding.execute ();

  dcStatus.setValue ("A");

  } else {}

  return;

  }

  }

  Option B - the problem with this is that the value of input for status text appears in the Active form for all records in form regardless of its database.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  -no doubt this two lines are not needed here

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  dcStatus.setValue ("A");

  BindingContainer links = getBindings();

  OperationBinding operationBinding;

  the operationBinding = bindings.getOperationBinding("Commit") (OperationBinding);

  Object result = operationBinding.execute ();

  } else {}

  return;

  }

  }

  Here's the code from the Fragment of shape for used buttons.

  "< af:button text = 'Activate' id ="bActivate' icon="/icons/activate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonActivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= ' n '} ">"

  < af:showPopupBehavior popupId = "pActivate" / >

  < / af:button >

  "< af:button text = 'Disable' id = 'bDeactivate' icon="/icons/deactivate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonDeactivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= 'A'} ">"

  < af:showPopupBehavior popupId = "pDeactivate" / >

  < / af:button >

  Here's matching Popups for each of the buttons Activate and Deactivate.

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pActivate" >

  < af:dialog id = "dActivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmActivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to enable the seller?" id = "ol1" / >

  < / af:dialog >

  < / af:popup >

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pDeactivate" >

  < af:dialog id = "dDeactivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmDeactivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to disable the seller?" id = "ol2" / >

  < / af:dialog >

  < / af:popup >

  Thanks in advance.

  Best regards

  Arif Khadas

  If you bind components to a range of flow page bean. You must complete that it saves the State of the component longer than the life of the component.

  To change the value of the GET value of the component of the link layer and change it.

  In this way the changes are captured by the framework and you should see them.

  Timo

• Problems with slot-shaped table and set the values of column

  Hello
  
  I have a problem with a tabular presentation.
  
  I have two tables
  
  P_detail and table v_master
  
  columns of v_master:
  v_id
  v_Name
  v_info
  
  columns of p_detail:
  P_ID
  p_master_fk
  p_name
  p_info
  
  I want to have a tabular presentation where I can store permanent data retail values. That's why I want to keep the default main column join the detail columns.
  In SQL, I can do this with an outer join:
  
  SELECT m.v_name, d.p_master_fk, d.p_name, d.p_info
  OF v_master, p_detail
  WHERE v_id = p_master_fk (+)
  
  I get the lines that exist for the master data and can add values for the columns of detail. I removed the "add lines" because that makes no sense, because the amount lines are already offered at the opening of the tabular presentation.
  
  Now, I want to get/save the v_id (main table) in the p_master_fk column value
  
  How can I do this?
  
  Thank you and best regards,
  Matthias

  Hello

  One approach is to use a database instead trigger. If you define a database view using the query:

  SELECT m.v_id, m.v_name, d.p_id, d.p_master_fk, d.p_name, d.p_info
  OF v_master m, p_detail d
  WHERE v_id = p_master_fk (+)

  Then, create a trigger on the view that will insert in the detail table if d.p_id is null and update the secondary table if d.p_id is not null instead.

  The Apex tabular form is then based on the view (with identifiers like hidden columns) and all treatments multirow Apex should work without modification.

  Rod West

• Problem with a light Table in Bridge CS6

  Hello! After a re - install (which does not solve the problem with PS), now, I find that, when you use the light table in Bridge CS6, and after hitting the SPACEBAR, if I then click on the image, it goes to the size of 800%! Before the uninstall and reinstall, it has perfectly worked by taking images at 100% size.

  I hope someone can help...

  Thanks, farming
  

  Why you reinstall photoshop cs6?

  What operating system do you use?

  You reinstall all updates Photoshop cs6 by going to help > updates within photoshop cs6?

  After you enter the light table, use your mouse wheel to zoom to 100% and leave the light table.

  The next time you go to the lightbox and click on the photo, it should only go to 100%.

• problem with update of the number of lines

  Hello..
  
  Im very new to obiee and now to learn things.
  
  I'm using the following link to learn how to create a repository and work with it.
  
  http://www.Oracle.com/technology/OBE/obe_bi/bi_ee_1013/bi_admin/biadmin.html
  
  and im facing problem by updating the number of lines.
  
  get a dialog like...
  
  There was an error while updating the number of lines for "SH"... "" SH ". "" CHANNELS ".
  nQSError:17001Oacle Eroorcode:942, the message: ORA - 00942:table or view does not exist the OIC OCIStmtExecute call: select count (*) channels.
  Failed executing the statement nQSError:17011SQL.
  
  Wat could be the problem? can anyone help?
  
  thnx in advance

  Which account you use the update? SH? Check if the account has certain rights that tabel/view.

  concerning

  John
  http://obiee101.blogspot.com

• problem with update of applications

  

  Hello, I had a problem to update my applications this screenshot above is always like that there not is finished. Can someone help me with this problem?

  Sign out of your Apple ID: settings > iTunes and App Store > Apple ID

  Force reboot

  Reconnect

• Problem with update iOS 9.3!

  When I try to upgrade to iOS 9.3 he always tells me that I am not connected to the Internet, even though I am if it fails? What is happening with this download, never had this problem before?

  Many users have encountered problems to update their devices, their activation or signing into their account after updating iOS 9.3. Apple is aware of the problem and working on a fix.

  Take a look at these articles for additional information on the issue or adapt:

  If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3If you cannot activate your iPad 2 (GSM model) updated to iOS 9.3

  Apple stops updates iOS 9.3 for iDevices older due to Activation Server Lock growing problems.

• Problem with update Internet Explore 80242006-Vista error

  Hello world!!

  I had problems with the update and that run internet explore. It's been a while since I can't watch videos on it is to say, even if I've never had such problems with any other browser. And now I can't update my system and more specifically the internet Explorer. I get an error message whenever I have try and all microsoft proposed solutions were not useful.

  The error message is 80242006 and is defined as an unknown error.

  Any ideas? Something might work! Help, please!

  my [NOD32] subscription had expired two weeks before I desided to install MSE [and] my panda subscription had expired [NOD32 has been installed]

  See...

  I can't install Microsoft Security Essentials to clean my already infected computer?
       http://social.answers.Microsoft.com/forums/en-us/msescan/thread/87058857-D181-4019-a723-efd9a49d9275

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows 7, problem with update

  I am facing the problem with the release of windows 7, it shows the error code 80070570 and 800 b 0100.
  I can't find a solution, how to address this issue.

  Hello

  How to fix update error 800b0100 Vista (and Windows 7)
  http://www.SimpleHelp.NET/2008/07/06/how-to-resolve-Windows-Vista-update-error-800b0100/

  Error Code 800b0100 in Windows Update
  http://www.instantvista.com/800B0100.html

  Error message when you try to use Microsoft Update or Windows Update Web sites to install
  updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702
  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• problems with updates for Windows (for Win XP)

  I have problems with Windows (for Win XP) updates...
  (1) I installed the hardware updates for my sound card (via Windows update) and now I can't hear the music through my speakers or headphones.  In addition, related to my sound card software do not work either!
  (2) at the same time, I tried to install Microsoft .NET Framework 1.1 Service Pack 1 through Windows Update and that would not install (.. .and I tried several times).

  So to rememdy those issues, I tried for hours to use the system restore, but whenever I've tried I'm not able to successfully restore and I tried several unique restore points.
  Any suggestions?  I spent hours on it, and nothing seems to help!

  Hello hoke, welcome.

  1. What is the brand and model of your computer?

  Let us know if it works:

  1. download the .NET Framework here cleaning tool:
  http://blogs.msdn.com/astebner/attachment/8904493.ashx

  2. run the utility and remove all versions of the .NET Framework
  3. restart your computer

  ---
  After the reboot
  ---

  4. download the .NET Framework 3.5 from here:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=333325FD-AE52-4e35-B531-508D977D32A6&displaylang=en

  5. next, restart your computer

  Let us know if it works,

  Thank you! Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with update-installation - KB2463332

  I'm unable to install KB2463332 (SP 4). What have I to do?

  Hi Malfait,

  Thanks for posting your query in the Microsoft Community Forums.

  I see that you can not install KB2463332 on the Windows XP computer.

  Help me with more information.

  1. you receive an error message/code?

  2 is this problem specific to any updates, or all updates?

  3. how you try to install this update? It is through the Windows Update installation / autonomous?

  Try these methods.

  Method 1

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

  http://support.microsoft.com/kb/906602.

  Note: To set the computer back to start normally after boot, use the procedure under the steps to configure Windows to use a Normal startup state in articlehttp://support.microsoft.com/kb/310353.

  Method 2

  Download the update on the site mentioned below:

  Microsoft SQL Server 2005 Express Edition Service Pack 4

  http://www.microsoft.com/en-us/download/details.aspx?id=184.

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.