Problem with VPN Site-to-Site between RV215W and ISA550
Hello
I tried to set up a site connection to site between a RV215W and an ISA550 for a whole day without success now, could someone help me with an example of configuration?
I'm new to this kind of configurations and VPN Options of two routers seem very different, with IKE an IPsec on the RV, IPsec and IKE policies, transform the policies on the ISA.
Outputs the Wizards from Site to Site are not either.
The RV215W is intended to connect a new branch via 3G and that it doesn't have a fixed IP address.
Subnet the ISA is 10.10.11.0/24 VR 192.168.100.0/24
Thanks for any help in advance!
T
Hello
I check all the screenshots and you must:
-Disable the PFS on ISA500 (screenshot of ISA500 of a second)
-Enable IPsec on ISA500 (first screenshot of ISA500)
-Activate the VPN on RV215W (first screenshot of RV215W) policy
And iniate the RV215W VPN
I hope that this step will fix the problem
Thank you
Mehdi
Tags: Cisco Support
Similar Questions
-
Problem with VPN Site-to-Site between RV215W and ASA5510
The RV215W is intended to connect a new branch via 3G, but fail.
But when connected to the internet via a cable modem VPN works.
I have set up with the FULL domain name and remote ip address.
Please help me soon as soon as you can.
Thaks a lot.
Henriux2412.
Dear Henry;
Thank you to the small community of Support Business.
I doubt that this VPN site-to-site is compatible with the USB modem broadband Mobile 3 G, but I have when even suggest to verify that the Status field of the map will show your mobile card is connected (status > Mobile network). I've seen a similar problem with a Verizon USB modem where the solution was to change a few settings in their access Manager software ("NDIS Mode - connect manually" has been selected and change this option to "Modem Mode - connect manually fixed), but if this is not your case then I suggest you to check with your service provider about supported VPN site to site on the WAN configuration.
Except that I advise you to contact the Small Business Support Center for more information on this subject, although I don't think they will support
https://supportforums.Cisco.com/community/NetPro/small-business/sbcountrysupport
Do not hesitate to contact me if there is anything I can help you with in the meantime.
Kind regards
Jeffrey Rodriguez S... : | :. : | :.
Support Engineer Cisco client* Please rate the Post so other will know when an answer has been found.
-
Cisco router 1921 internet problem with a site-to-site vpn connection
I have TE-data Modem 3com dsl connection in 2 sites. and I have 2 routers cisco 1921 and there is a vpn site-to-site between them and
the VPN connection works well. and I configured the PAT on one of them to allow users access to the internet but tere is a problem:
all users can ping a public ip address
all users can ping any URL
but there is no navigation of the internet
and it's configuration
NOZHA #sh run
Building configuration...Current configuration: 2425 bytes
!
! Last configuration change at 11:24:08 UTC Thu Sep 20 2012
!
version 15.0
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname NOZHA
!
boot-start-marker
boot-end-marker
!
enable secret 5
!
No aaa new-model
!
!
!
!
No ipv6 cef
IP source-route
IP cef
!
!
!
IP dhcp pool 1
network 192.168.40.0 255.255.255.0
router by default - 192.168.40.1
4.2.2.2 DNS Server 8.8.8.8
Infinite rental
!
!
IP domain name shady2012
!
Authenticated MultiLink bundle-name Panel
!
!
!
license udi pid CISCO1921/K9 sn FCZ1432C5KM
licence start-up module c1900 technology-package securityk9
!
!
!
redundancy
!
!
!
!
crypto ISAKMP policy 10
BA aes
preshared authentication
Group 2
ISAKMP crypto key shady2012 address 81.10.xxx.yy
!
!
Crypto ipsec transform-set shady2012 aes - esp esp-sha-hmac
!
card crypto 150 s2s - VPN ipsec-isakmp
the value of 81.10.xxx.yy peer
PFS group2 Set
match address s2s-vpn-Oly
!
!
!
!
!
interface GigabitEthernet0/0
MTU 1000
IP address 41.41.xx.yy 255.255.255.252
NAT outside IP
activate nat IP
IP virtual-reassembly
automatic duplex
automatic speed
s2s - VPN crypto card
!
!
interface GigabitEthernet0/1
192.168.40.1 IP address 255.255.255.0
IP nat inside
activate nat IP
IP virtual-reassembly
automatic duplex
automatic speed
!
!
default IP gateway (hop 41.41.xx.yy) next
IP forward-Protocol ND
!
no ip address of the http server
no ip http secure server
!
The dns server IP
overload of the IP nat source list mypool GigabitEthernet0/0 interface
IP route 0.0.0.0 0.0.0.0 41.41.xx.yy
IP route 192.168.20.0 255.255.255.0 (41.41.xx.yy) next hop
IP route 192.168.30.0 255.255.255.0 (41.41.xx.yy) next hop
!
mypool extended IP access list
deny ip 192.168.21.0 0.0.0.255 192.168.20.0 0.0.0.255
deny ip 192.168.21.0 0.0.0.255 192.168.30.0 0.0.0.255
deny ip 192.168.40.0 0.0.0.255 192.168.20.0 0.0.0.255
deny ip 192.168.40.0 0.0.0.255 192.168.30.0 0.0.0.255
allow an ip
s2s-vpn-Oly extended IP access list
ip permit 192.168.40.0 0.0.0.255 192.168.30.0 0.0.0.255
IP 192.168.21.0 allow 0.0.0.255 192.168.20.0 0.0.0.255
IP 192.168.30.0 allow 0.0.0.255 192.168.40.0 0.0.0.255
ip licensing 192.168.20.0 0.0.0.255 192.168.21.0 0.0.0.255
ip permit 192.168.40.0 0.0.0.255 192.168.20.0 0.0.0.255
IP 192.168.21.0 allow 0.0.0.255 192.168.30.0 0.0.0.255
!
!
!
!
!
!
!
control plan
!
!
!
Line con 0
line to 0
line vty 0 4
password
opening of session
!
Scheduler allocate 20000 1000
endIf anyone has the answer please answer ASAP
When you say can ping any URL, I am assuming that you are pinging of the FULL domain name, IE: it is resolved to an ip address, right?
If you disable the VPN, can you access the internet?
You have a proxy server or anything that could block navigation?
This error message you get on your web browser?
Also try another web browser, and none works?
-
Hello I have problem with my site, and mozilla. Google chrome, safari, explorer, opera work ok. I have Sobipro for both the company and the logos and images without work!
When I try to open the url is this:http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpgwhith mozilla is the following: /images/sobipro/entries\288\587_img.jpg when ichange it------with this / work.
any idea?
Thank you
Hello, the URLS that contain-in their path are not valid. Firefox is less tolerant to errors in this respect than other browsers.
Correct the path to http://www.athens-dayandnight.gr/images/sobipro/entries/288/587_img.jpg in the source code of this site or if you don't control the contact of the site their webadmin to do... -
I always have problems with the site freezes Kohls with the cursor in the box "add to bag". However, I tried accessing the site Web of Kohl by using Internet Explorer (I never use). In any case, it worked! Why it should work OK in Internet Explorer and not in Firefox? What should I do now?
Okay, AdBlock Plus is very good, and I don't know about the others. What I recommend is disabling all then by visiting them the page. (Make sure you reboot if you need to disable addons) Tell us if the page works after that.
-
Is there a problem with the site? I'm unable to purchase/download anything.
Is there a problem with the site? I'm unable to purchase/download anything.
For accuracy, I'm not on the Web site, but my windows desktop program.
-
Hello
I am a student of digital media MY about to rehabilitate major work for the design of the internet, the part of my course. I sent my site to my tutor, and she wrote telling me there are major problems with the site, she sent me the following
There are serious problems with your site.
Two minimum criteria are missing.
The first file should be called index.html, check on a mac, pc does not display extensions.
The names of the html files cannot contain any space, capital letters and characters
Your site must contain at least 4 sections or pages.
The text is not readable.
The content has not been sufficiently developed.
Also, your file must contain only your index.html, your html pages, your images, your css and js script.
Please change the names of files within dreamweaver in the files Panel.
Ask a friend to read it and give you feedback.
I hope this helps.
Most of what she has said here, I don't understand, I heard index.html which is the homepage, I don't have a mac so impossible to verify anything here. Don't know what she means "the text is not readable" I checked it on a different computer than the one I worked on and it was fine. The last piece is also confused me, she won't say there are other things in the folder that shouldn't be there? If there is someone who can help a little with the foregoing, I would be very grateful.
Thank you
Anthony
As seen from the Panel files of DW (F8), a typical site of 4 pages can contain the following basic structure:
Local files
SiteName - (C:\sitename)
about.html
index.html - default home page
contact.html
Prod.html
-styles
Layout.CSS
Typography.CSS
menu. CSS
-scripts
jQuery.1.10.3.min.js
Slider.min.js
-images
logo.PNG
Image1.jpg
Image2.jpg
image3.jpg
etc...
Nancy O.
-
Internet Explorer problems with Web site
We have problems with our site Web display correctly in older versions of Internet Explorer. It seems fine in the newer versions and other web browsers, but in Internet Explorer its is not centered and the information is sent down below the navigation. The site is www.wctractor.com for help or answers are greatly appreciated.
The first lines of the document shows
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">
Internet Explore hate having to look down the document to highlight lines, spits the dummy and goes into Quirks Mode (i.e. a mode before IE5).
Remove the
http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">
bit and place the following on the first two lines of the document
IE will be a very happy chappy after that.
-
Original title: Weird problem.
My computer says it is connected to the network and the network is connected to the internet, but I can't access what whether the internet associated with such sites as Web and other programs which require an internet connection. I have reset the router and the computer many times and the problem is still there. Any ideas on how to solve this problem?
Very strange that this issue has been raised suddenly and even system restore back the working time is not solve it. At this point, I suspect something mischievous because restoration of return must be a guaranteed fix. If it worked on Friday, it should work if restore you backup on Friday.
I ask you to check if your network card has got an update which could have features broke, but that can't be the problem because the restoration of return would be handed over the old version.
Indeed, using restore in a working time essentially says that this isn't a configuration problem, because configuration is in a known-to-be-working state (because he worked at the restored time).
I would therefore start at this stage, verification of hardware, antenna, connections, equipment devices.
-
Original title: frustrated!
When you play on fb slotmania or bingoblitz I no longer can I send anything to teammates stating that there is a security risk. Also he always tells me to put in my cell phone no. or I'll lose fb. Help! THX
Hello
- The question is limited to Facebook?
- Do you have similar problems with other sites?
- What web browser you use to access the Internet?
Where the question is specific Facebook then you can contact Facebook support for more help.
-
Problem with El Captain (5.1.7 server) and the management of permissions
Hello world
I have a big problem with our Mac Mini Server (El Captain) and the server program.
In recent weeks, the server didn't give the permissions of a folder.
for example:
Mr. X had permission to read and write to a folder.
Mr Y too.Mr. X has create a new folder one record something in it.
Mr Y had the permission to read or write to the folder create Mr. x. But he should have.
Or
Mr. X has save a file to a folder
When he opens it again it is write protected and cannot be replaced.
So you have to save under a different name in the same folder.
And every time he save/close the file.
Anyone know what could be the problem?
Thank you
Greetings from the Germany
Chris
My guess:
A few weeks ago someone messed with the permissions on your server and made a mistake. So, you got an inappropriate list ACL (Access Control), which is rampant in the file and must be removed or fixed.
C.
-
Original title: Blue Screen of Death (BSOD)
Hello im having a problem with my computer I try to reboot and I get BSOD saying internal error Planner video background
Here is my mini dump file:
https://onedrive.live.com/redir?RESID=60FEBF11B9A3D76! 4807 & authkey =! AGKWUp-ndI0XBgE & ithint = the file % 2cdmp
and here is my system info:
https://onedrive.live.com/redir?RESID=60FEBF11B9A3D76! 4810 & authkey =! AFloWJarqiE83QM & ithint = the file % 2cnfo
im hoping that this will let you know what is wrong or not
RW
This phenomenon was linked to your video driver (atikmpag.sys) /DirectX. I would completely remove the current driver and install the latest driver available.
-
I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers
I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.Hello Lascarica,
I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.
-
I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help
Run the Setup again.
Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation
Does that help?
If the above does not help then try to reset WMC: -.
Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.
Now reconfigure WMC again
-
I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.
1) update your nVidia/software drivers to the latest version for your model video card + operating system.
(2) check that the equipment is not defective.
This is not a Microsoft / number of the operating system. For additional troubleshooting - contact the manufacturer (nVidia).
Maybe you are looking for
-
Satellite L310D - Viruses and the issue of recovery
My partner has a Satellite L310D, which recently is victim to the virus of windows security.We initially tried to restore to a previous restore point but he resurfaced after a few days. We then reinstalled windows from the recovery partition of the H
-
Hello I have problem Pro.l Mac I can't connet to projector .this which the problrm
-
Satellite M30 742: need Win XP drivers and tools
Hello After running my M30 5 years without problem, I had a fresh install of windows XP.No problem. But now I can't find a few drivers and utlilities. Or those I found does not work.is not owrking:fn - keys (for brightness and soundvolume etc.)-LCD s
-
Upgrading or adding SSDS to urge m6 - 1158 ca
Hello I have a HP Envy m6 - 1158ca I use of the last two years and really happy with that. Is it possible to add SSD on it with the existing 1 TB HDD? If it is possible, then can you please send me the guide to do this? I'm also going to increase the
-
sound giving a display sign that "you must be an administrator running a console session in order to use the SFC utility." Please help me fix this.