Problem with WiFi network

Similar Questions

• When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  When I try to establish a wifi connection, it shows that the problem with the network card is not fixed. How can I solve this problem?

  Hello

  Thank you for writing to Microsoft Communities.

  Until we start troubleshooting on this issue please provides us additional information by answering a few questions, this will help us better solutions to the problems.

  1. What is the full error message do you get?

  2. are - that you be able to access or connect to the Internet via wired?

  3 have there been recent changes to the computer before the show?

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1:
  Try to run the network troubleshooters. Check if it enumerates and helps resolve the errors.
  http://Windows.Microsoft.com/en-us/Windows7/open-networking-troubleshooters

  Method 2: If the problem persists, try to follow the steps from the link.

  In the Windows wireless network connection problems:
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check this link for more information:

  How can I troubleshoot network card? http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Please follow these recommended steps and post if you still experience the problem.

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• Problems with wifi, bluetooth and gps in my iphone after updating iOS 6

  After that the last iOS 9.3 update my iphone 6 has problems with wifi, bluetooth and gps. Now, my wifi connection is slower and falls easily on a short distance. My bluetooth does the same. But the biggest problem is the GPS on my phone. I tried Island:

  -By doing a reset network

  -Do a reset total and restore my phone

  -To restart my phone twice.

  -Audit and third-party applications unnistalling

  Nothing works. I was in the apple store where they checked my phone and they say everything is ok with the phone. I'm not crazy, and I know when something does not work correctly. Also, I think it's iOS 9.3 update a reaponsible for my phone issues.

  Please fix bugs fast.

  Having the same exact problems since the upgrade. In addition, battery drains very quickly now, and sometimes the phone becomes very hot. It took to the Genius Bar and they told me everything was normal in the diagnostic tests. Restored, restarting, etc., and always the same problems. GPS locates me, but then don't follow my movement at all and told to go outside as the gps is not detected even if I am outside. Bluetooth connection to the car and watch grave intermittently. Signal WiFi is greatly reduced and falls easily.

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• Only intermittent problem with wifi on alienware m17x with qualcomm wireless killer

  Hi, I have an alienware M17x with windows 8.1 and qualcomm wireless killer. I have a serious problem with intermittent wifi, that appears when I use programs like Skype, steam, multiplayer games, etc.

  Even if the wifi is connected, the connection suddenly stops working sometimes, especially when I use the applications mentioned above. (if I try to load a Web page during this time, the page remains attached to "resolving host"). Strange thing is if I disconnect and reconnect to the wifi Internet starts working immediately. Or I can wait a few minutes and the connection is re-established automatically. This isn't a problem with the network, because I had this problem on countless wifi networks I've worked, and all my other devices work fine in the same time, that my laptop no longer works.

  Additionally, this problem occurs only on wifi, if I use a connection cable, this never happens. (this is not yet a case of the wifi signal strength, as happens even when I am sitting right next to wifi router and wifi in the notification area icon is visible full signal).

  In the last months, I tried various possible solutions, but none of them have solved this problem:

  -Updated to 8.1 windows

  -Update of the qualcomm network drivers

  -Stop of various applications that I think might have been the origin of the problem

  -Uninstall completely different applications

  -Close all anti-virus programs

  Still after all of these steps, the problem persists. It would not be a big problem, as the loss of connectivity is not permanent, but what makes multiplayer games completely unplayable on my alienware machine. :(

  Just today I tried to launch AlienAutopsy test for my network card in Killer Wireless - N 1103 several times, and each time that the "transfer of data verification test" failed due to no connectivity (all other tests passed very well, only this one test failure all 6 times). I thought that it could be linked and gave me some hope that I might be able to target the cause of this unique problem. Therefore, I post here. If anyone can help me, it would be much appreciated!

  +++ S.O.L.U.T.I.O.N. +++

  «Go to network-> Network and Sharing Center-> change the adapter settings-> Wireless - N 1103-> properties (right click) Killer network card-> and finally UNCHECK it (the f * cking) "Qualcomm Atheros control bandwidth «»

  Enjoy the rush.

  See you soon

• Problem with WiFi adapter (RTL8187b) on the Satellite L350-146

  Hello.

  Problem with WiFi (RTL8187b) on the Toshiba Satellite L350-146 adapter:

  Exchange of packets of 192.168.0.177 with 32 bytes of data:

  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 4 ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 6ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 874ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 364ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 3ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 1ms TTL = 128
  Reply from 192.168.0.177: bytes = 32 time = 2ms TTL = 128

  Ping statistics for 192.168.0.177:
  Packets: sent = 50, received = 50, lost = 0 (0% loss)
  Estimated duration of admission, transfer to ms:
  1msek = Minimum, Maximum = 874 ms, average = 34 ms

  Win Vista HP, drivers last.
  This problem with different access points.

  Sorry for bad English may

  Need to check if theres no interferense in your plase, check also if the WiFi adapter is ok!... you can do this reinstalling the driver and check if it works if not you have to go with an ASP in your area to check the Wi Fi card...

• Problems with WiFi from Toshiba and their lack of support - you're not alone

  For those of you out there problems with WiFi on a Toshiba laptop, you're certainly not alone.

  Over the past years, I have noticed a growing number of different brands and models of computers laptop toshiba and laptops with the same problem.
  Last year, 100% of the toshibas that came in my workshop have had this problem, it is about 75% of the laptops that I fixed.

  These models have all hardware wifi (Agere, Intel and Realtek)

  The wifi switch is on, on the same computer, some programs to detect as being market, others see it as extinct.
  What, it doesn't connect to a same wireless router when used to.

  Responses of toshiba were the usual non-professional form response from: it must be the router, try to flip the switch, you have updated the bios?, update the drivers et al.

  It is a software problem, and given the number of people on this forum talking about the same issue, it's a great.

  Often, I came across the issue of windows for communication services wireless disabled by software of Toshiba and I believe, that it is a conflict between tosh software and various other (zone alarm, windows and al.)

  In some cases, the software seems to intervene and to corrupt the OS from windows drivers and interfere with their implementation and enforcement, which is worrying, the software doesn't have to touch all areas. (if not, what is the point of a BONE in layers)

  I sometimes managed to force to work (for example manually restart the services), but these solutions are not a "clean way" of doing things.

  The most reliable way to solve this problem seems to be, backup your data and reformat back to the manufacturer's specifications, and then immediately uninstall the software from toshiba and update the drivers terribly old (even those on the site are about one year more up-to-date for the model I'm working currently on.) Unfortunately most of my clients is companies that need a LOT of data stored in different saved locations, then a ton of programs specialized to be reinstalled, which is slow and costly.

  Message from TOSHIBA:
  Please make it a sticky in this forum for all the REAL solutions, not one of the threads that I watched with your suggestions has been resolved.

  If there is little no support for your products in this regard, I will contact the ACCC, choices, and associations of trade fair with an open letter that I ask all customers affected to sign, and I will put a national call for people with the same problem to come forward.

  I would like to ask also if you encounter a problem where your wifi stopped working and it does not detect or work, please just post "bump" under here so that we can keep way reasonably clutter free.

  I used to recommend Toshiba and Asus for laptops, now, this list is one.

  Greetings from the Australia (aus site sent me here for the forums)

  Damien Holley

  +@lonetraider+
  You can do what you want but as mentioned above; WiFi problems are not specific to a laptop manufactures, you'll notice WLan issues on computers (laptops, desktops computers) all manufactured products.
  I had 4 different books of four various manufacturers and ALL had problems of WiFi, but most problems could be solved by the driver update, change, or reset of the router are.

• Problem with WiFi since 10.11.2

  Hello

  I have some problems with Wifi since I installed 10.11.2.

  Before all work perfectly and since 10.11.2, my wifi will disconnect and reconnect it.

  Do you also have problems with Wifi? and maybe a solution?

  Thank you

  Jeff

  I had no problems with my WiFi since the update, but I'm sorry to hear that you are.  Have what you done on your end to fix this?  Have reset you your modem/router?  Have you contacted your ISP?

• HP tm2-1010ea problem with wifi

  all start with replacing the battery, then replacing the ssd

  format / new drivers/windows /.

  and now problems with wifi drops and loose conectivity light is on and after a 30 min close by him self and no connection is any program to test if I need to replace it or?

  OK solution

  Download windows iso version that your computer link is originally (be careful)

  Download clone drive (feeware)

  mount the iso (diferent external drive)

  Start windows to install then start upgrading and connect on the net with an ethernet cable to find the latest files for windows start

  wait...

  a few reboots approx. 1 hour

  for my problem was frame 4.5 has been corrupted and repair windows

• WRT350N ver 2.0 problem with WiFi

  Hello

  I bought ver2.0 WRT350N and I have problem with WiFi. WiFI is not working no signal and WiFi even not blink. I did the Firmware Upgrade to the latest version, reset several times 30-30-30, but it does not help. I'll be appreciate for any response.

  Concerning

  Robert

  Thanks a lot for your answer. I have reset the router for 2 minutes, but it's not helping. It looks like this: after the power cord to the electric light taken router is green and blinks twice 10 seconds more late light output changes from green to yellow color twice safe. I can ping the router, I can connect to it via the web page, I can update firmware via the web page. I see all the options. I can turn on and turn off wifi but the router does not give any signal radio (wifi)... and of course wireless light is black. I tried to download the firmware via TFTP without success. I don't know what more I can do...

• Problem with the network connection Wireless since installation of win 7.

  I ve just installed Windows 7 last week and no problems until yesterday when all of a sudden my laptop can´t to connect to my wireless network... Strange because my Iphone can't, so it seems like there is no problem with the network.
  And the funny part is that when it detects one network different, other than mine, it connects and works very well!

  I ve tried unplugging the laptop and Wi - Fi connection, but it just says that it can´t to connect to the network... He finds it, but when I click on connect it says only: No..

  What to do?

  Hi KlinzmannFussballspielerin,

  Welcome to the Microsoft Answers community.

  Before you try the procedure below, change the security settings for the firewall at various levels and check if the problem persists.

  I suggest you to update the network drivers.

  Steps to update of network driver:

  1. click on the Start button.

  2. in the search box type devmgmt.msc, and then press ENTER.

  3. Select the network device and right click on it

  4. now, select Properties.

  5. in the Properties window, on the driver tab, click Update driver.

  6. After installing the updates, restart the computer.

  For more information visit http://windows.microsoft.com/en-US/windows-vista/Finding-drivers-What-to-do-when-your-hardware-wont-work-with-Windows-Vista

  To solve your problem, try to turn on network discovery. To do this follow the steps below:

  1. Open advanced sharing settings by clicking the Start button, then Control Panel. In the search box, type network, click Network and sharing Center, and then, in the navigation pane, click on change settings for sharing advanced.

  2. click on the chevron to expand the current network profile.

  3. click turn on network discovery and then click on save changes. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  To learn more about this feature, please visit the below mentioned link:

  http://Windows.Microsoft.com/en-us/Windows7/what-is-network-discovery

  If the problem persists then I suggest you to reset the network adapter settings. Then follow the steps below

  To reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:

  http://support.Microsoft.com/kb/299357

  Disable the IP helpdesk:

  1 hold the Windows key and type R, type "services.msc" (without the quotes) and press enter

  2. scroll down to the IP assistance service, right-click on it and select Properties

  3. in the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.

  4. then click on "Stop" to stop the service from running in the current session

  5. click on OK to exit the dialog box

  Disable IPv6:

  Try to uninstall IPv6 on all interfaces, the removal of virtual cards of IPv6 and reset the TCP/IP stack. To remove the IPv6, go to the properties for each network adapter, and deselect the check box next to the Protocol "Internet Protocol version 6 (TCP/IPv6), which will turn off, or select it and click on uninstall, which withdraw power off the computer.» Then go into Device Manager and remove any 4to6 adapters, adapters miniport WUN or tunnel adapters.

  NOTE: You should do this for each network connection.

  Disable the DHCP broadcast flag: link: http://support.microsoft.com/default.aspx/kb/928233

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  (How to back up and restore the registry in Windows)

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers

  To resolve this issue, disable the DHCP BROADCAST flag in Windows Vista. To do this, follow these steps:

  1. Click Start, type regedit in the search box, and then click regedit in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters\Interfaces\ {GUID}

  3. in this registry path, click the (GUID) subkey that corresponds to the network adapter that is connected to the network.

  4. on the Edit menu, point to new, and then click DWORD (32-bit) value.

  5. in the new area #1, type DhcpConnEnableBcastFlagToggle and press ENTER.

  6 right-click DhcpConnEnableBcastFlagToggle, then click on modify.

  7. in the value data box, type 1 and then click OK.

  8. close the registry editor.

  By setting this registry key to 1, Windows Vista's trying to get an IP address using the BROADCAST flag in DHCP Discover packets. If that fails, he will try to obtain an IP address without using the BROADCAST flag in DHCP Discover packets.

  Hope this information is useful.

  Let me know if it worked.

  Thank you, and in what concerns:

  Umesh P - Microsoft Support

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Error code 797: connection is not available because there is a problem with your network card or modem

  I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

  Hi Muffakham,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Did you the latest changes on the computer before this problem?

  This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Method 2:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check out the link for more information.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.

• Problems with wifi, I have a wifi extension in my house and I can not connect

  Original title: Wifiproblems

  Problems with wifi, I have a wifi extension in my house and I can't connect it, I try with support but it did not work. It's a shame in a new tablet to have this problem

  It only happens with the tablet surface, not with other devices

  It's an easy way to solve

  I saw a similar situation in forum wireless, they have solved the 'limited' problem by disabling the Extender, and then turning turn it back on. He solved their problem, and it is easy to try. I hope it works for you.

• Problems with Wifi on windows 8

  Dear Microsoft

  I report a serious problem with loss of WiFi connectivity on windows computers 8. Sometimes many different problems occur when trying to restart our system of windows 8, after that we had problems with our applications, we had problems with WiFi connectivity on our computer that shipped with 8 64-bit windows. Please take this issue seriously and solve this problem as soon as possible... Can you please do a few good deeds as the determination of the loss of WiFi connectivity on our computer?

  Thank you for the problems I have with windows 8.

  To avoid confusion and duplication of effort, please post all further follow-up replies to your original-online http://answers.microsoft.com/en-us/ie/forum/ie10-windows_8/ie-10-issues/c0ac0ed8-ddc0-4a7c-8f08-7f84f2ddcded thread (March 8, 2013 & ff)