Problem with WinXP Compatibiltily mode

Similar Questions

• Problems with the Tablet mode

  I have problems with the Tablet mode when the display on a shelf. If you visit the Web site on landscape, then everything fits perfectly on the screen however if you view on portrait then it does not. How to solve this?

  You must define a new braking point and design that matches the portrait view.

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• problem with the away mode system

  problem with the system of mode in the bios but canoe away find it in bios to disable

  Mode absence in Windows Vista
  http://www.Microsoft.com/whdc/system/pnppwr/powermgmt/awaymode.mspx
  See the download link at the top right.

  Also:
  Open Control Panel, click "Power Options."
  There are 3 "power management" available:
  (1) balanced
  (2) power Saver
  (3) high-performance (see the supplementary schemes)

  Click "change plan" to the "Balanced" plan
  Then click "change advanced power settings".
  Scroll down and click on the + next to the "media settings", then click on the + sign next to the option "when sharing media.

  Finally change the "Setting" mode to one of the three choices: "Allow the computer to sleep", "prevent the idling to sleep" or "allow the computer to remote mode.

  In case you want to choose either #1 or #2.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.

• 9214 OR problem with a common mode error

  Hey,.

  I take readings using thermocouples type k using the NI 9214 module in a cRio.  System works very well at room temperature, but once I take the surroundings up to 300 ° C thermocouple, I get the error message: "a common mode error has been detected."

  I use the NI 9214 mode high resolution, with disabled OTD.  I went through the documentation on the error, but it is light on the proposed solutions.  I wonder if anyone else has seen this, and if so, how you solved it.

  Thank you!

  Hey GiantDeathRobot,

  Thanks for the reply! It was very useful.

  Let me start with additional information about my setup.  I use a k type thermocouple in a vacuum chamber to measure stuff inside.  I have the NOR-9214 in a just plug cRIO of data of the current temperatures.  Thermocouples are unshieleded in the room, but are exposed to the end inside the room.

  Your comment to the ground made me think that there might be a problem of noise EFM.  So I solved my problem in a weird Garland.  I had the commune for the NI 9214 connected to the nut of the common leg of the connector.  I added a ground cable from the power strip that I use to power all of the components of the House (including the cRIO) cRIO chassis.  This completely clears my noise problem.  I thought I'd follow upward, in case anybody out there is struggling with this as well.

• Problems with the VCA mode when moving to Vcentre 4.1

  Hi all

  I currently have three ESXi 4.0 update 3 host running in a cluster. Two servers are identical and the third a later generation of CPU. The cluster is running in mode VCA Intel i7 with success.

  Also, my server Vcentre is 4.0 update 3 running on a 32-bit Windows Server 2003 R2.

  I built a new server on Windows Server 2008 R2 Vcentre and I am running Vcentre 4.1 update 1.

  I did the exercise to my old server Vcentre guests to my new. No problem until I try and their cluster. My server with the latest CPU is not allowed admission to the cluster. The new cluster is running same EVC mode as the old cluster.

  Need to update 4.1 Vcentre 1 be backward compatible for EVC modes with respect to the material?

  The servers are all DELL R710, the old two servers running XEON X 5570 processors and the latest Intel XEON X 5670 processors host tracks

  Do I have to update all 3 hosts 4.1 before I can redefine the clusters in EVC mode?

  Hoping that someone has been through a similar experience and can advise you. Unfortunately, I do not have a test lab to run it on.

  See you soon. Mark

  I don' t think you need to upgrade to ESX host.

  I think try in the following order:

  (1) turn on VCA for cluster

  (2) add the latest processor, select baseline and then old processor server.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1003212

  -A

• Lavbiew 2012 project problems with WinXp SP3 Installer program install - errors

  I have a project that has built and installed Windows Xp and 7 when built with LV2011. I upgraded to LV2012 and I get a Setup installation error build installed on a Windows Xp Service Pack 3. I noticed that LV2011 had WinXp as min requirement and LV2012 now is Win Xp SP2 minimum. But this isn't the issue here, because the target is SP3.

  I found that the version of Labview 2012 Installer went from LV2011. The properties of Labview 2012 Installer has the default settings

  This includes all the components for the Runtime Library 2012 F3. More precisely the core of mathematics and the Non-anglais supports for the runtime library. The two elements give Installer failure and mistakes. See attached for the correct settings file. I have it became the local technical support technician and service appealed to this subject to be submitted to the development team.

• I had problems with the color mode. kept, restart photoshop to find the problem. NOW Photoshop CS6 will not organize, it is stuck on "initializing". How to start?

  At first my documents were pasted on the CMYK color mode, and I couldn't understand how to convert the file in RGB.

  Finally, I abandoned, saved the file and tried to present what I was working on a Web site.

  Before that, I closed photoshop and he raised 2 times in a row to test color on profiles. When finally it seemed to me he decided to go back to RGB, I closed and returned to climb my image. However, the site did not accept it because the jpg was in CMYK. So, I went to relaunch photoshop to convert its color profile and now photoshop will not launch.

  As a first step, it got stuck on "checking memory."

  I closed my computer to see if this would clearly be the question, then tried to restart photoshop and it is now stuck on "initializing".

  I really need photoshop work, so how can I solve this problem?

  Laptop: The Retina of Macbook Pro screen

  OS: OSX 10.11.3 EL Capitan

  PS: Adobe Photoshop CS6

  It is the first time that I ever had this problem, and I've had this program for 2012.

  Hi shiblets,

  Please press the home button on the keyboard when you see the screen "initializing".

  If it does not, please press the SHIFT key and then launch Photoshop, to ignore the third party Plugin.

  Kind regards

  Tanuj

• Problems with Ultra endurance Mode...

  I put my USM on fishing to conserve battery power, which is pretty amazing, but then when I turned off the mode that I had lost several apps.

  They are not on my home screen, not on my list of applications and when I went on the apps in 'settings' I went on "all apps" and apps that I'm missing are there but I can't open them.

  When I go to the store to try to see if I can open the apps to play this way they say 'install', which means that they have been uninstalled, you would think? Hmm...

  There are several applications, games and a lack of widget and do not remember many of the apps I've had to reinstall. It's a little EMBARRASSING.

  EUGH.

  There is a great thread on that here:

  https://talk.sonymobile.com/T5/Xperia-Z2/UltraStamina-wipes-list-of-turned-off-apps/TD-p/982002/page...

  You could have searched a bit before posting.

• ? the problem with the "Develop" mode

  Downloaded Lightroom (cloud Creative) to the new computer.  Photos very well in library view but do not appear mode develop.  Empty deep blue screen only.  How can I fix.  Cannot change.

  Hi delberth,

  Go to the Lightroom preferences > performance > uncheck 'use graphics processor' and then check.

  Kind regards

  Claes

• Mozilla is aware of the problem with protected in Flash Mode?

  Today I started to have problems to view integrated in Firefox 12 Flash content. I tried all the usual steps (for example to clear cache, disable extensions, update the plugin and then finally of this update to Firefox 13) but nothing worked.

  Then I found an Adobe forum which some contributors have experienced the same thing in the last days, and it seems to have had a problem with the Protected Mode in the latest version of the Flash player. I disabled this mode and everything now works perfectly again - so I thought I would bring it to your attention in case others have the same problem.

  The Adobe support article is here: http://forums.adobe.com/thread/1018071?tstart=0

  Hope you find it useful...

  Thank you, cor - el. Hope there is a fix before long, otherwise it doesn't seem to be that much interest in the application Adobe mode protected in the first place!

• Problems with Acer Aspire V5 - 573 G UEFI?

  Hello

  I have Acer Aspire V5 - 573G. Before all the problems start I used Legacy BIOS mode with 10 Windows Pro 64 bit OS. Have the latest BIOS v2.30.

  So, recently, I decide to move from the Legacy BIOS UEFI and reinstalled Windows 10 Pro 64-bit with UEFI mode activated with the GPT partition style. Everything went well with the installation.

  Now I am facing following issues with UEFI and Windows 10 witch, which I didn't in Legacy BIOS mode:

  1. When the laptop goes to sleep and is not touched for a while, I can't wake up to laptop. Press any key on the keyboard or touch the touchpad don't wake it either. Only way is to press the Power button to stop completely and then turn it back on. I don't know if it's something to do with the Windows settings to resolve this problem.
  2. Restart Windows sometimes stop laptop computer. It's really strange... Windows shows it restarts, screen goes black and does not start, instead it laptop shutdown. ??
  3. And when I shut down the system, it is not entirely clear. Often the blue light continues to blink, CPU and GPU fans are always and still closing system entirely to press on the button / stop.

  These issues are somehow related to UEFI, because I had no such problems with the traditional mode and Windows 10. This is starting to annoy me when the laptop stops completely.

  Any help on this?

  Thank you!

  http://community.Acer.com/T5/Windows-10/Acer-Aspire-S7-stuck-in-sleep-mode/m-p/427855#M3432

  http://community.Acer.com/T5/Windows-10/aspire-V5-573G-freezes-instead-of-sleep-irregularly-not/m-p/...

• Problem with the design view in Dreamweaver CS5

  Hi all

  I'm having a problem with my creation mode on a page I created in Dreamweaver CS5.

  The files can be found here as well as a jpeg file showing the issue I'm having.

  http://www.siltd.co.UK/PRB/

  Everything was fine until I added the three classes:

  {.crproductsrightpanelheading}

  Width: 186px;

  top of the margin: 25px;

  background-image: url (.. / images/crproductsrightpanelheadingbg.jpg);

  background-repeat: no-repeat;

  background-position: left;

  padding-left: 28px;

  do-family: Arial, Helvetica, without serif.

  color: #FFF;

  do-size: 14px;

  line-height: 27px;

  float: left;

  Clear: right;

  }

  {.crproductsrightpanellist}

  Width: 199px;

  top of the margin: 5px;

  padding-left: 5px;

  float: left;

  overflow: auto;

  }

  .crproductsrightpanellist li {}

  do-family: Arial, Helvetica, without serif.

  color: #FFF;

  do-size: 12px;

  list-style-image: url (.. / images/crdash.jpg);

  line-height: 18px;

  list-style-position: inside;

  }

  Now, I can hardly see what is happening.

  It's good in Live View mode and also when published, but design view is like having a steering wheel towards the bottom of my pants... It's driving me crazy!

  What it looks like when published can be seen here:

  http://www.siltd.co.UK/new%20SI%20Site/crproducts.html

  Any help telling me where I went so wrong would be appreciated.

  Thanks in advance.

  Andy

  Run your pages through this validator and clean up any errors...

  http://validator.w3.org/

  For now, you have a large number of errors that need to be addressed, about 90 altogether.

  While some browsers allow to better interpereting what you wanted to do than others (IE being the absolute worst), DW is a maniac, especially in Design view. It is still displayed incorrectly in DW after you fix all the problems, after return and we can take a closer look.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the safe mode and still no success. Help, please.

  Question
  I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the mode 5 firefox safe and always without success. Help, please

  To help other users find solutions, please come back to this Thread and connect you to the
  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer