Problem worsens of mouse click

Similar Questions

• VMWare mouse click problem

  We currently have a problem that has been experimented on VMWare Workstation 7 and VMWare Player 3.1.6 build-744570 and VMWare Workstation 7.1.6 build-744570.

  
  The problem causes mouse clicks are ignored in the guest OS and seems to occur after a sound is played within the guest OS.  The problem can be reproduced by opening Windows Explorer and navigate through the folders by double clicking on the file.  After opening a file and then try to open another folder or by selecting a file in the folder, some other mouse clicks are ignored for a period of time (about 3-5 seconds).  The same thing occurs if a Windows application displays an error message.  The only solution we have found so far is to disconnect the sound between the host and the guest operating system: VMWare menu > Removable Devices > Audio > Disconnect.

  
  The problem was first lived after an upgrade to laptop for the host operating system (upgrade from Windows 7 to Windows 8.1) and a new model of Lenovo Thinkpad.  This problem occurs in virtual machines that we work very well with old laptops using the same versions of VMWare.  We are speculating that the question must relate to 8.1 of Windows or the audio driver in the host operating system (or a combination).

  
  The driver in the host operating system is:
  Realtek High Definition Audio
  Driver date: 18/02/2014
  Driver version: 6.0.1.7179

  
  Used laptop is Lenovo Thinkpad W540 (although this has been seen with other versions of laptop computer Lenovo)

  
  The host operating system version is: 8.1 64-bit Windows.

  Everyone knows these symptoms?

  Hello srdev78:

  I had this same problem where the mouse click in the guest operating system stopped

  work immediately the sound card on the host system began to read any audio

  from any source (iTunes, etc.).

  So, for example, everything in the OS, including the clicks of mouse, guest should work

  as planned until the moment wherever I would start playing audio of my host system, i.e. to

  Firefox, iTunes, whatever. Then immediately audible is by the speakers, mouse

  Click the stop registration completely comments. At this point, the guest operating system is accessible

  only via the keyboard of the host system. The audio source on the host system has no importance

  as long as the audio drivers are loaded and sound starts streaming from the

  the computer speakers.

  The solution that worked for me was uninstalled the Realtek High Definition Audio

  drivers provided by Lenovo and returning on Microsoft default Audio drivers. Now

  my clicks of the mouse in the guest OS to register as expected and without any problem and I'm

  productive all at the same time listening to music of my host system.

  Description of the host system:

  -Lenovo W540 (32 GB of RAM, 1 GB M550 Crucial SSD)

  -Windows 10 Enterprise x 64 (current with all updates from Microsoft)

  -VMware Workstation 12 Pro (12.1.0 build-3272444)

  Description of the guest system

  -Windows 7 Professional x 64 (current with all updates from Microsoft)

  -Current with VMware Tools.

  FYI - I uninstalled "Realtek High Definition Audio Driver" version 6.0.1.7572 which was

  provided by Lenovo Lenovo system update utility. In my case, this problem started after

  I upgraded my host system to 10 Windows (including all the updates from Microsoft and Lenovo).

  Thank you.

• Creating objects and remove them on the mouse, click

  I'm stuck with the problem of deleting objects in the scene. Here's my problem:

  The mouse click, I create a circle and apply the translation.

  and on the second click of mouse, I want to delete it off the coast.

  So, to clear the scene, I tried,

  MouseEvent {}

  root.getChildren.removeAll)

  create circle

  }

  doesn't seem to work. Any ideas. I fell on the canvas, but I don't know if I need, because animate a circle works well, but not clearing it...

  The Node class has a research method that is used to find a node in the container based on an id:

  import javafx.application.Application;
  import javafx.scene.Group;
  import javafx.scene.Node;
  import javafx.scene.Scene;
  import javafx.scene.paint.Color;
  import javafx.scene.shape.Circle;
  import javafx.stage.Stage;
  
  public class RemoveNodesFromCont extends Application {
      @Override
      public void start(Stage primaryStage) {
          final Group root = new Group();
          Scene scene = new Scene(root, 400, 350, Color.AQUA);
          scene.setOnMouseClicked(event -> {
              Node n = root.lookup("#myCircle");
              if (n == null) {
                  Circle circle = new Circle(event.getX(), event.getY(), 50, Color.BLUE);
                  circle.setId("myCircle");
                  root.getChildren().add(circle);
                  System.out.println("The circle is created");
              } else {
                  root.getChildren().remove(n);
                  System.out.println("The circle is removed");
              }
          }
          );
          primaryStage.setScene(scene);
          primaryStage.show();
      }
  
      public static void main(String[] args) {
          launch(args);
      }
  }
  

• Right mouse click when the file name of MS Explorer results saying that he has encountered a problem and will stop, and it stops quickly.

  Right mouse click when the file name of MS Explorer results saying that he has encountered a problem and will stop, and it stops quickly.

  Right click issues are usually caused by a third-party software that put an entry in the context menu. You can solve this with the free ShellExView.

  http://www.nirsoft.net/utils/shexview.html - ShellExView

  Make a right-click is slow or weird behavior caused by context menus management - http://windowsxp.mvps.org/slowrightclick.htm
  Manage the entries in context menu for folders, readers, and the Namespace objects - http://windowsxp.mvps.org/context_folders.htm MS - MVP - Elephant Boy computers - Don ' t Panic!

• Problem with 'if - ElseIf' statement with the mouse, click.

  I'm having a problem with the code IF ELSE use with a mouse click. I want whenever a user 'clicks' I want to run a particular block of code, up to 3 clicks, then nothing. I tried var meter click local and global but can't seem to cross the first '' if. '' That's what I have now (I use console.log () to keep track.

  Ready model I create a global var...

  Enter the code to run when the composition is fully charged here
  sym.getComposition () .getStage () .setVariable ('clickcnt', 1); //Set 1 meter
  

  var i = sym.getComposition () .getStage () .getVariable ('clickcnt');

  Console.log ("count starts at"+ i ");

  
  

  on the stage, I create an event 'click '...

  Insert the code for the mouse, click here
  var i = (sym.getComposition () .getStage () .getVariable ('clickcnt');)
  If (i = 1) {}
  Console.log ("counter is =" + i);
  c code
  sym.getComposition () .getStage () .setVariable ('clickcnt', 2); //Set against 2
  }
  ElseIf (i = 2) {}
  Console.log ("counter is =" + i);
  c code
  sym.getComposition () .getStage () .setVariable ('clickcnt', 3); //Set against 3
  }
  ElseIf (i = 3) {}
  Console.log ("counter is =" + i);
  c code
  sym.getComposition () .getStage () .setVariable ('clickcnt', 4); //Set against 4 to take away
  SYM. Play (100); //play scenario animation
  }
  else { //I'm using it to deny any additional clicks.} I don't know there is a good way to do this. I don't know him
  SYM. Stop (1000);
  Console.log ("End");
  }
  ;

  I when I run this it never happened the first if it's like the 'clickcnt' var is not getting updated or read correctly.

  Thank you

  Joel H

  try if (I == 1) double equal.

• Mouse click initiates not the selected action

  When you use safari 9.1.2, by clicking on an option (for example "advance to the next page") on a website does not result in the proposed action. A "drop-down list of the option" unnecessary and undesirable appears instead. I have to click on the desktop out of the active page and then go back and open the selection again, often several times before the mouse click allows selection. What's wrong? How can I fix this problem?

  Try the boot without failure and tests.

  Boot mode safe. https://support.Apple.com/kb/PH21875?locale=en_US

  Same problem in Mode safe?

• MP3s used to play in a new tab on middle mouse click. It now shows a save/open with dialog box. How to play n record mp3 if I want to?

  Previous links to files mp3 used to get opened and played in a new tab by pressing the click way/scroll button. Like played mp3 I had an option to record the audio. After a reinstall of my OS (currently on Win 7 Professional 32 bits) and Firefox 41.0.1, I'm not able to do the same. Middle mouse click now opens a new tab and a dialog box open with - or save - as. There is no automatic playback. I would like to have the old function of Firefox. I don't know if my OS has installed SP and I am not able to install OS updates at the moment. Are there settings to do or a particular version of firefox to install to get what I want? I'm just an average user with a bit of computer know how. Thanks in advance.

  Make sure that you have supported for Windows Media Foundation in your operating system.

  • https://support.Mozilla.org/KB/fix-video-audio-problems-Firefox-Windows
  • http://KB.mozillazine.org/Video_or_audio_does_not_play

  topic: config page:

  • Media.Windows - Media - foundation.enabled = true
  • Media.DirectShow.enabled = true
  • http://KB.mozillazine.org/about:config

• I can't use option "open in a background tab. Previously the order left mouse click

  Hey,.
  Here:
  http://support.Mozilla.com/en-us/kb/mouse%20shortcuts?s=open+in+background+tab & As = s
  is shown that command + left mouse click on opens in a new tab in the background.
  In Firefox 4 it does not work. Do you have any idea how to make it work?

  Thank you.

  Have you checked your extensions?

  I saw some extensions (New Home tab, if I remember correctly) reported causing this problem.

• Problems of keyb/mouse on A30 - 921 reactions when you play

  OK, pretty much since I have received this laptop I had a problem with the keyboard or mouse when you play. Everything works very well, and adults in general unless you're gaming.

  The keys in the game (say HL, HL2, Quake II, GTA, etc) are used to 'paste' in a direction for a second or more, or they have a slow reaction, as with mouse clicks. You could be market forward on the left and then hit to walk upright, but he would continue to walk forward and left for an extra second or two and then go right. I formatted the computer with the recovery disc and the error remained. I then formatted with my own clean copy of XP pro and the problem is STILL there, it must be linked to the material and not related to the software. I even tried an external USB keyboard and he did the same thing.

  I have a feeling that its to do with the use of RAM or CPU, but can't be sure. The laptop is a Toshiba Satellite A30-921, and the shared video memory chip RAM - the video is an ATI Radeon 9000 Mobility. You can choose to use 64 MB of RAM or 128 MB of RAM, the two are still the problem.

  I am at my wits end with this, because the problem causes a lot of grief when playin fast movement of the FPS. I tried to email Toshiba and they just told me to ring customers, and I don't think they won't be of any help. Its really annoyin me since I've had this laptop partly for the reason of the game.

  If someone has an idea, it would be much appreciated.

  Specification of the laptop:
  Toshiba Satellite A30 921
  Intel Pentium 2.8 GHz processor
  512 MB OF RAM
  ATI Radeon 9000 Mobility (UMB shared 64 MB or 128 MB)
  40 GB HARD drive
  FireWire/LAN etc.

  Thanks for any help guys.

  Hello

  I asked my friend on his opinion because he is a maniac in the game what he thinks about. This laptop you is certainly not a game machine, he said. You must set the graphics settings. HL and Quake II should in his work but HL 2 has to complex graphic applications and it will not work properly.

  Good bye

• iTunes can't find the music, does not recognize mouse clicks

  I am in iTunes in an environment Windows 10.

  Due to a series of hardware problems, I had to spend all my music on an external hard drive, and I think that I put in place the appropriate file structure, with songs in the album folders, album files in the files of the artist, artist folders in a folder titled music and this folder in a folder called iTunes. The library database is on C, where is the iTunes program. No matter if I put iTunes preferences to search for music in E:\\iTunes\ or E:\\iTunes\Music, it can't find about 60 000 pieces. If I orders of iTunes to the location of the 1 of them, it can not find others in the same album folder which it considers as missing. AND, at this point, iTunes begins to ignore mouse clicks; so I can not help it find any music more without stopping it through master. (This is a newly installed version of iTunes, I can't get it to display the version number).

  If I left click on the icon of iTunes in the taskbar at the bottom of the screen, nothing happens. If I right click I can get iTunes to view by clicking on "go to the current song," which shows the current song, but also shows a spinning blue "O" (windows 10 equivalent of the hourglass).

  Any ideas on how I can:

  -Download iTunes to see all my files;

  -Recognize mouse clicks?

  Thank you.

  False alarm on the mouse click on the question; the program was busy to search for files and insensitive to the clicks as it did.

  He found all but about 2 000 files. It is a manageable number for me locate manually.

• How can I disable the sound of mouse clicks?

  I use the mouse to change a lot of information, and the sound of the mouse clicks is annoying my other half.   (5 clicks for each changed item)     I have the sound control on the computer is off and can't find anything that helps in the Panel.    It is not practical to use the touchpad.    Any ideas please?

  Hello

  (1) what is the operating system installed on your computer?

  Follow the steps mentioned below to turn off the sound of the click and check if the problem still persists.

  (a) click the Start button in the Windows 7 menu bar.

  (b) in the Start menu, click Control Panel.

  (c) on the Control Panel dialog box, click hardware and sound.

  (d) in the hardware and audio dialog box, click change system sounds.

  (e) in the sound dialog box, use the scroll bar until you see the event entitled: Start Navigation.

  f) click on launch Navigation.

  (g) from the drop-down list sounds , select none.

  (h) click OK.

  Hope this information helps.

• Microsoft touch mouse clicks do not work properly.

  Original title: Microsoft Touch Mouse

  I look forward to this for months and fortunately bought mouse yesterday. But I'm afraid I have to return within a few days because the right click is tiring, that I can't keep my finger on the left side if I am in the right click? have to raise that finger each time. No way to click. So by selecting windows without accidentally trigger something is a problem without a middle-click. It very quickly becomes a pain in the * after playing starcraft 2. Why is it not possible to customize the touch gestures? Another major failure. Other than these issues, it's a beautiful piece of engineering. My concerns will be adresed. or do I have to look elsewhere for a new versatile wireless mouse suitable for a left-handed person?

  Hi Premier69,

  You must contact Microsoft hardware support for assistance on this issue.

  Microsoft Hardware support

• Contact information for return pixel Imaq image with the mouse click event

  Hello

  I'm trying to get the coordinates in pixels of an image Imaq based on a mouse click event, similar to this post and this post. The problem is that with the first post, I get the coordinates in the image control and hesitate to trust them, they seem to have the Center origin, may return negative coordinates and do not represent the actual size of the detector that I use (512 x 512). It also returns the coordinates outside the actual data when it is clicked on the image control framework. The second method returns simply null coordinates. What I want are the coordinates of the pixel displayed when hovering the mouse imaq image control framework.

  What baffles me, is that I tried the second method with a png stock file and it works fine, it is only when I create an image from the data of my camera than the coordinates are returned null. Note data views of camera under control of image very well.

  Any ideas would be useful. Enclosed is a picture of the offending code and the Panel before displaying the camera data is coming (I know it needs some cleaning).

  Thank you

  Tyler

  for help, please send your vi

  but I think that this example vi is your solution

  check this vi

• Do a right mouse click on the name of the file causes Windows Explorer stop.

  Do a right mouse click on the name of the file causes Windows Explorer stop.

  The problem is sometimes caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

  When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find it easier to disable them all and then reactivate (green area) one at a time and try to explore until the culprit is found.

• Mouse click taken single as a double click.

  I have problems with my mouse. Whenever I click on an icon to select it, or drag, the click is used a double click and double click seems to sometimes act as four simultaneous simple clicks. I'm not able to use anything properly because of this. Assuming this is the problem with the old mouse, I bought a new one, but found no use. It includes the same way. All folder options are perfectly fine. Double-click to open an item is checked.

  Have you checked your speed "double-click on '?  Go to the control Panel\Mouse to test.

  Rosie