Problems after installing the second SATA drive in Windows 7

Similar Questions

• CD player not recognized after installing the second hard drive

  My OptiPlex 755 Windows 7 with a ran fine until I installed a second hard drive.  Now only the hard drives are recognized.  I have cd players connected to SATA 2 and 3 a the SATA drives 0 and 1.

  The 755 a 0 and 1 and then 2-3 THEN esata.

  Other chipsets have 0 1 2 3 4 5 and raid 5 capacity.

  These options appear as
  SATA 3
  for the mini tower,.
  SATA
  0
  through
  SATA 2
  for the
  Desktop
  for

  The blue connector is drive 0

  The 2nd Black, this is the dvd's.

  There is no car setting just the port enabled or disabled.

  2nd HARD DRIVE GOES ON THE WHITE CONNECTOR

  The 2nd CD GOES ON THE CONNECTOR FOLLOWING

  DRIVE CABLE IS BLUE AND CD CABLES ARE ORANGE.

  

  

  

• Problems after installing the new hard drive

  It has just been put again hard drive and I already made a backup to, it doesn't seem to be
  microsoft ripheriques of work .no I also did get back on two front disc

  * original title - it was just put the new hard drive *.

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• What do I need install the second hard drive HP PAVILION: p6633w

  What do I need install the second hard drive HP PAVILION: p6633w?

  donp815 wrote:
  

  What do I need install the second hard drive HP PAVILION: p6633w?

  Hello

  You need two cables, one is a sata cable:

  http://www.play.com/PC/PCs/4-/30305659/706331346/STARTech-com-6in-SATA-to-right-angle-SATA-serial-ATA-cable-female-SATA-female-SATA-6-inch-red/ListingDetails.html?_%24JA=TSID:13315% 7Ccat: 30305659% 7Cprd: 30305659 & kw = {keyword}

  This cable is only for data and connect the hard drive to the SATA connector on the motherboard.

  The other cable is energy:

  http://www.itpartsdirect.com/STARTech-15-24cm-4-pin-Molex-to-SATA-power-cable-adaptor.html

  It connects the hard drive to the PSU.

  You can also buy a combo like this cable:

  http://www.Amazon.co.UK/DP/B00064GBT4/?tag=hydra0b-21&hvadid=9550951989&ref=asc_df_B00064GBT4

  All you have to do is to connect the hard drive and that's it. Make sure that the main drive with the operating system is connected to the primary SATA connector (I think there are the numbers 1, 2, 3...)

• My MBP in trouble after installing the Wacom Intuos driver.

  My MBP takes almost 5 minutes to start after installing the Wacom Intuos driver, I remove and reinstall but no change!

  and it seems that the machine was very unstable and very slow, sometimes the beach ball appears and no response for a few minutes and works again!

  I try to contact Wacom support in Hong KONG but still no body to answer my call...

  Can be resolved by upgrading to IE captain? Thank you very much!!!

  Wacom driver: 6.3.15 - 1

  News by cheque to be:

  EtreCheck version: 2.6.6 (226):

  MacBook Pro (13 inch, late 2011)

  MacBook Pro - model: MacBookPro8, 1

  1 2.4 GHz Intel Core i5 processor: 2 strands

  4 GB of RAM expandable

  Bluetooth: Old - transfer/Airdrop2 not supported

  Wireless: en1: 802.11 a/b/g/n

  Battery: Health = Normal - Cycle count = 87 - SN = W01457N9TD3BA

  Intel HD Graphics 3000 - VRAM: 384 MB

  Color LCD 1280 x 800

  OS X Mavericks 10.9.5 (13F1507) - since the starting time: 4 hours

  Disc information:

  HGST HTS721010A9E630 disk0: (1 TB) (rotation)

  EFI (disk0s1) : 210 MB

  1 t MBP (disk0s2) /: 999,35 go-go (590,22 free)

  HD (disk0s3) [recovery] recovery: 650 MB

  MATSHITADVD-R UJ - 8À8)

  Configuration files: (Does that mean?)

  / etc/hosts - Count: 57

  Startup items: (Does that mean?)

  PenTabletDriver: Path: / Library/StartupItems/PenTabletDriver

  Startup items are obsolete in OS X Yosemite

  Launch system officers: (Does that mean?)

  [loading] com.apple.RemoteDesktop.plist -invalid signature!

  [loading] com.apple.screensharing.MessagesAgent.plist -invalid signature!

  Top of page process CPU: (Does that mean?)

  55% mdworker (3)

  4% kernel_task

  4% WindowServer

  2% fontd

  2% hidd

  MacBook Pro, OS X Mavericks (10.9.5)

  Speed up boot times-

  Start time - speed (2)

  Start time - speed (3)

  file/etc/hosts - fixing a pirate

  You might also consider adding more RAM. 2 places I've seen recommended more to buy reliable RAM are below. I have bought RAM several times to other World Computing and have always been very satisfied with the product and the service. They have instructions online on how to replace the RAM. OWC has also tested the RAM above what Apple says, it is the maximum. Now, I have 6 GB installed on an iMac 2008 so-called beginning limited to 4 GB and noticed an improvement.

  Crucial

  Other World Computing

• I'm having trouble installing Photoshop CS6 after installing the new hard drive.  What do you suggest me?  Tony

  I'm having trouble installing Photoshop GS6 after installing the new hard drive.  What do you suggest me?  Tony.

  CS6 - http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• Problem after installing the new drive on Pavillion G6-2320

  The original hard drive on my old book of 8 Windows Pavillion G6-2320 3 months crashed and I sent to HP and got the replacement of the hard drive (laptop still under warranty). They gave me support online printing that I just need to install it in the laptop and would not need the disc to install the operating system. (I had originally bought my own replacement hard drive and had error messages so chatted with online support who took care of the hard drive replacement confirmed that indeed one supplied with the laptop has been damaged)

  After you install the new hard drive and turn on the laptop, the following message appears on the black screen:

  Not found boot device

  Please install an operating system on your hard drive

  Hard drive (3FO)

  The F2 System Diagnostics).

  I went to F2 and test the hard drive. Everything was made. Help please!

  Thank you

  Hello:

  You will need to call HP support and ordering of a set of recovery disc for your model in order to install the operating system and the programs provided with your laptop.

  HP is not delivered replacement hard drives pre-configured with any software.

  They should also ship you the free of charge from the PC recovery discs is still under warranty.

• Possible to install the second hard drive in the p6110f Pavilion

  Is it possible to install a second hard drive, 1 TB Seagate, in the expansion on my Pavillion p6110f slot?

  Hello

  Your PC has a hard drive cage which will host two disks.  This how-to - HP document from removing a hard drive will show you the process to remove the hard drive cage.

  If you want to continue using the Expansion Bay then you will need a 5.25 "to 3.5" adapter support. NewEgg.com would bring such a support.  You also need a SATA data cable.  This how-to - HP article will give you an idea on how to use Expansion with a 5.25 device Bay ".  Check by the optical drinve for a spare SATA power connector.  If it is not available, then you will need to use a SATA power splitter.

• How to install the second hard drive in the Dell XPS 8900

  My new Dell XPS 8900 only has a single HH and I would install a second HH.  Probably 3.5 SATA internal a 2 T.  I need a repair of XPS 8900 so that I know how to install the second disk.  I just need a few simple instructions so that I know how attached a data cable SATA and do the go by car.  Direction will be appreciated.

  You will need the drive AND a data cable.  The manual is here:

  www.Dell.com/.../manuals

• HP EliteBook 8440p: Best boot option after installing the new hard drive and put to memory.

  I just installed the new hard drive for my laptop and will get the cards of two memory installed tomorrow. I would like advice on what would be the best option to start when the laptop for the first time I'm on fire.

  I have the original Windows HP recovery disk came with the computer.

  I also have a recovery disc and a system image on disks created with Macrium Reflect two days ago.

  I also have a recovery disc and a system image is created on an external hard drive Seagate two days ago. (I've read mixed reviews on these is currently working as a media of rescue with Win7 Pro).

  I guess if I use the HP recovery disc I would be then just use any system image I prefer, without the recovery disk. Anyone know if it makes a difference at all which method to use?

  bozzle73

  My recommendation would be to restore using the image of MR (Macrium Reflect) you did.

  But then, I used Mr. on all my PCs for years and am a big fan - having had it Miss ever in the years and years of use.

  You will need boot from the boot of MR media (you did that right) and, if you photographed all the required partitions for the operating system, restore it on the new drive should take a few minutes, and when this is done, you reboot and everything should be OK.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• How to restore the operating system after installing the new hard drive?

  After installing a new hard drive to replace a disc that fails, can you install windows 7 and the other necessary "tricks" to re-setup and driver discs Dell came with the computer? or you buy a new copy of windows 7?

  See the Dell system software installation

  I can find the most recent versions are:

  Windows XP x 86 http://ftp.dell.com/utility/Dell_System-Software_A06_R288017.exe

  Windows XP x 64 http://ftp.dell.com/utility/Dell_System-Software_A07_R288023.exe

  Windows Vista x 86 http://ftp.dell.com/FOLDER31331M/1/DSS_UTIL_WIN_R282536.EXE

  Windows Vista x 64 http://ftp.dell.com/FOLDER88660M/8/Dell_System-Software_A06_R282537.exe

  Windows 7 x 86 http://ftp.dell.com/FOLDER88692M/9/Dell_System-Software_A03_R282539.exe

  Windows 7 x 64 http://ftp.dell.com/FOLDER88677M/8/Dell_System-Software_A03_R282538.exe

• How to install the second hard drive in the Satellite A200-1 of body weight?

  I see my new Satellite A200-1 of body weight has two hard drive bays, the research in the second span, I don't see how a second drive can be mounted as the plug into the Jack seems to be missing.

  What parts do I have to mount to place a second drive that they are held in stock by out of the local computer and are quite cheap, can someone advise me on part numbers etc of the bits I need.
  Thank you
  Steve

  Hello

  I know that this empty place for second HARD drive is a bit confusing, but the same situation is with my A200-1CR. The fact is that some A200 models come with 2 hard drives and laptop case design this place must be prepared for this second HDD.

  But this does not mean that each A200 can be improved for the second HARD drive.

• I can't log on windows 7 as an Aministrator user after installing the update of security for windows 7 KB2286198.

  When I connect windows as Aministrator, error massage "service user profile Service has no logon. User profile cannot loaded bo"appear. I'm only allow Windows to logon as a Standard user. Started as a Aminstrator I need to restore my computer (only in safe mode) at a time before installing the KB2286198 update. How to open a windows 7 mormally Admin user session after installing the update of security KB2286198?

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problem after installing the driver VGA for HP Pavilion 1212TX g4

  Hello. I just bought a new HP Pavilion 1212TX g4.

  I install Win7 Ultimate Pro in it and no problems found. But after I installed the VGA driver (ATI Catalyst) the problem occurs.

  The error occurring on the screen is something like this: Access Violation (0xc0000005).

  Cannot run multiple applications installed once the error occurs (for example: iTunes, Nokia Suite, Adobe Reader).

  I am looking for the AC VGA driver for HP Pavilion 1212TX g4 but the problem still occurs.

  Please someone help me. I can't use my new laptop

  Thanks in advance

  Herry

  If you have installed the drivers from various sources I start over with a clean install of Windows 7 at this point and use the specific drivers for your model >& drivers starting first with Chipset and AMD graphics card, driver Intel Rapid Storage Technology and all other cases.

• Tecra W50 - cannot start when installing the second hard drive (caddy).

  Hi all
  I have a Tecra W50 PT640A 04103NN1.
  When a second hard drive is installed in the Bay of DVD player cell phone will try to boot from the drive bay, not the internal drive
  This second drive has no operating system installed and so the fails to start.

  If I hit F12 at startup and select HARD drive, while the machine starts correctly. That is starts on the main hard drive.
  Change the order of boot in the BIOS makes all the difference; He will always try to boot from the second drive bay drive first.

  All known A it works correctly?

  Thanks in advance!

  Hi Doppelfrog,
  I had the same problem with my W50, got my HDD caddy a few days ago.
  You have a bit of luck to fix this problem?
  I believe that the Bios for this laptop is not developed to serve both drives (like the computer I had that one drive Bay) and it is not possible to prioritize the witch THAT HDD should start first...

  Kind regards
  Marcin