problems after the automatic updates

Similar Questions

• Problems after the automatic update from Microsoft Outlook

  A

  about having Microsoft automatic update, Outlook on Vista has stopped working properly. I can open the program, write an e-mail or two and may be able to send a mail, then the program freezes. It happened just after a update to day to day. How can I solve this problem without removing the new updates?

  Automatic updates has also changed all of my Web pages. It's very upsetting. Why? Internet Explorer took over. What was wrong with me. I gave permission to the automatic updates program but does not reset my personal settings. How can I avoid this in the future?

  http://answers.Microsoft.com/en-us/Office/default.aspx

  Office at the above link forums

  http://answers.Microsoft.com/en-us/Office/ee861097.aspx

  Outlook Help Forums at the link above.

  They will help you with your Outlook questions when repost you in the Office Forums above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Windows Update Forum:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I get my laptop to recognize my printer wireless after the automatic update?

  After the automatic update I couldn't open any program (Word, Excel, internet etc.) that I managed to resolve by restoring my laptop settings before the update. It seems to have worked until I went to use my printer. My laptop will not find my printer through devices and printers, and when I go to print a document, an error box pops up saying "Windows cannot print due to a problem with the installation of the current printer.

  Your help would be appreciated gratefully.

  You must view the windows update history and the KB updates that have been installed, that you believe that the cause of the condition.

  And also to give the brand / model of the printer and the laptop

• Unable to connect after the automatic updates of Windows.

  I have two computers on my network, one with 7 and one with vista.  (US) both for automatic Windows update and yesterday, after both received updates, I couldn't go online.  Restored both and that solved.  Today it's the same thing.  I restored both and Windows updated together on manual.  Problem is I want to install updates, but you need to know what is happening.   Thank you

  Many other people have the same problem after the recent update of Win7.  A thread said that the culprit is update KB2705219 and you'll be OK if remove you it.  There is no other additional information that the user in question has done so successfully [I can't find the link, I checked both of these threads today].

  I have not tried to uninstall it I like my PC to install with a decent connection the last hours [no idea why].  I also have McAfee.

  - - - - - - - - - - - - - - -

  In addition, you should never uninstall McAfee or any other AV application unless you have a copy of the relevant utility uninstall application.  Results to omit this step can be severe and cause quite disconcerting & apparently unrelated symptoms.  I do not recommend this as a step for the problem today, but keep this link for when / if you decide to replace McAfee - McAfee Consumer products removal tool.  For other AV applications, see list of anti-malware cleaning - program uninstall tools

• All browsers stop working after the automatic updates

  * Original title: Windows 8 - all browsers stop working after update

  Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

  I've updated for Windows 8.1 over the weekend, it seems to work great so far.

• computer crashed after the automatic update Tuesday night

  Hi, Kevin

  My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you press F5, it offers 3 options 'Security Mode', but no return explicitly beforehand updated status.

  I'm not familiar with uninstalling and restoring systems. Can you walk me through the process? Can I uninstall or restore when the computer is in mode security (limited capacity)? How a WAIK/Windows PE image downloaded to another computer to help me with the computer that is out?

  Your suggestion to install SP2 apply to windows vista home basic version, 2007?

  Thank you!

  REMOVE your product key from your last post as someone can use your key and
  It will make a lot of grief

  Call or contact the manufacturer of the system since you are using an OEM version.

  See this thread.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/dd6dae5a-6659-4C84-aeb9-8f2d585a18eb
  Rob - bicycle - Mark Twain said it is good.

• After the automatic updates of Windows8 all my files disappeared

  After that the automatic update performed by Windows8 about two weeks ago, that all my files were deleted, all system settings and favorites are gone. The image of the Office was changed, as well as the background was changed from green to blue. Well, I managed to find my files in a file system, it back office. However, today, I just restarted my computer and the parameters are all back as they were 2 weeks ago but all my files are gone for good. There were about 200GB, now my drive C/watch 390 GB free on 440 Go, so my all files have been deleted. No search engine can find them. They are all gone. I had saved in this project, I worked on during 2 months and have no idea what I'm supposed to do now. How Windows can delete something I never heard it? I have not updated, restored or anything like that. Quite simply, I rebooted my computer.

  Can any guru who created this Windows8 how to get the files that my career depends on it?

  Hi Jenny,

  To provide the proper resolution, I would need more information on your side.

  1. do you receive any error messages? If Yes, what is the exact error message?

  2. What is the item number knowledge base of the installed Windows Update recently?

  Method 1:
  If files are missing from the library, I suggest you try the following steps.

  (a) go to the libraries in Windows Explorer.

  (b)with the right button no matter what folder gives you an error.

  (c)delete the folder.

  (d)with the right button on the "libraries" folder

  (e), select "restore default libraries".

  The folder you just deleted will now be back and fully functional with all your documents safe and sound.

  Method 2:
  If the problem persists, I suggest you to virus scanner to make sure that the computer is virus-free.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note:

  1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  2) if you run the virus scan of the program which is infected with the virus will be deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

  Check out the link for more information.

  Libraries: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/libraries-FAQ

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Unable to connect to the internet after the automatic update

  Firefox has an auto update this morning and since then I always get the page "the connection was reset". MSN messenger work always for the internet connection is not the problem. It's on my laptop (I'm currently on my PC) and it is on Windows XP, the firewall is ESET Smart Security. I checked the error Console, and it is one that appears, "" Livemark Service: food processor received invalid channel for http://en-US.fxfeeds.mozilla.com/en-US/Firefox/Headlines.xml".

  This has happened

  Each time Firefox opened

  Is automatic update on June 27, 2010

  NVM I just had to change the automatic proxy connection settings
  the automatic update should have changed the settings

• all my computers cannot be started after the automatic updates!

  Since the installation of the automatic updates on all 3 of my computers, none of them does not start, I just get a black screen. The only way I can do is turn it restarts and struck the whole upward, then click, use it at the last configuration, while it was working properly. Both xp and a vista. Help!

  Hey Nico SJ,

  This http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/why-do-i-have-a-black-screen-when-i-start-windows/ddf978da-4ba1-49dc-8844-2407c3fc1c82 thread can be useful.

• Problem with wireless connection after the automatic update of Service Pack 2

  Do not see my wireless modem to connect after that Windows Vista Service pack 2 and the update of security were auto-mis to update last night.  Can see modems of neighbors but not mine.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  Or transfer your question in this forum: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After the automatic updates received after 11/5, my computer started to stop itself after a period of inacitivity (1 h 30 or more). Updates could cause this problem?

  Updates have included:

  Office 2007	Update of security for Microsoft Office System 2007 (KB2289158)		Wednesday, November 10, 2010	Automatic updates
  Office 2003	Update of security for Microsoft Office 2003 (KB2289187)		Wednesday, November 10, 2010	Automatic updates
  Windows XP	Windows malicious software removal tool - November 2010 (KB890830)		Wednesday, November 10, 2010	Automatic updates
  Office 2003	Update of security for Microsoft Office PowerPoint 2003 (KB2413304)		Wednesday, November 10, 2010	Automatic updates
  Office 2003	Update for the filter of junk e-mail in Outlook 2003 (KB2435682)		Wednesday, November 10, 2010	Automatic updates
  Windows Defender	Update definition for Windows Defender - KB915597 (definition 1.93.1456.0)		Tuesday, November 9, 2010	Another Source

  I also received a message error (?) like:

  0x6ae55429 - what this could mean?

  Power Control Panel options - check your settings

• HP ENVY laptop - 15-ae178ca: Second monitor stopped working after the automatic update of HP

  I use my laptop with a second monitor (HP Pavillion 22xw) connected by HDMI. It was working fine until yesterday (including yesterday it worked), when a message from automatic upgrade HP was shown to informing him that the system needs to be restarted. After that, my second monitor stopped working. The system will not identify it more. I tried another cable, I rebooted several times, I tried to update the specific Intel graphics driver, I tried to uninstall and install manually another (I can't get this one done, because when I run manually downloaded driver there is a message saying that I need to contact the manufacturer). Please notify that I need my second monitor is fully functional!

  Hello @MAlex_B,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the display and wanted to help you!  I see only after an update, the external monitor no longer works.

  Given that this problem happened recently, have you tried to perform a System Restore, to define the notebook to its previous working state?  If this does not work, have you tried to update the drivers of graphics Chipset and BIOS on the HP website directly?  You can find the drivers for you product here: drivers - HP's ENVY for laptop - 15-ae178ca

  Please post back with the results.  Let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Windows Vista boot problems, after an automatic update

  Can someone help me with the boot?
  When I start my laptop it goes until is displayed: 'No configuration update 3 of 3' and all stays at 0% for 1 or 2 minutes and after it stops automatically. It restarts again and appears the same following 2 minutes and stops.
  How can I fix this without having to install the DVD? I don't have the installation of my Windows DVD. But with on DVD with also windows vista, I tried to fix it, he showed me that it is not a compatible version of vista on the DVD.

  Hello

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• Vista 32-bit Home Pemium does not start after the automatic update. Crashes 90% during step 3 of the configuration of update.

  Started to start for the first time today, and after half an hour of PC was still at the stage of configuration update 3 to 90%. Tried to restore the last good configuration without success. IE 9 has been installed yesterday and I rebooted a couple of times very well. I guess an automatic update downloaded all night is the problem.

  Hi Dick50,

  Try the following and check if it helps.

  Method 1: Try to start the computer in safe mode and see if you can start fine. If he is able to start try to perform a System Restore.

  System Restore: frequently asked questions

  Method 2: If it is impossible to start then try to boot into the Windows recovery environment (WinRe).

  ·         Do the Startup Repair.

  ·         Achieve the restoration of the system from the same options.

  Method 3: Once you are able to start normally, look for the updates and take note of the update that is offered.

  Just reply with the results.

• Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

  Hello.

  I have some problems after that the latest bios upgrade to version 6.80. First of all, I would like to note that Setup of HW does not work for me. I tried to use this tool to change the settings of the bios without success. This was done also by running this application with administrative privileges without success.

  The initial problem appeared after I tried to disable "open Panel - Power on" setting.
  This has been activated before the update bios and at some point I wanted to disable, because he gave me a nightmare when you carry because she would then put the computer in a bag.

  No matter how many times I tried to turn it off, it seems always enabled in HWsetup.
  Another feature that I can't edit's startup speed.
  It remains fast even if I tried to change to normal.

  I'm on Windows x 64 8.
  The case is now.

  GROUP OF EXPERTS
  HWsetup reports Open PANEL - PANEL as activated, while the Bios shows it off. It is indeed turned on and I could not turn it off. I even tried him for in the Bios and then try to disable in HWsetup, no change.
  STARTUP SPEED
  HWsetup startup speed related to 'NORMAL' but actually is 'FAST '. In the Bios, it reports its normal, but its easy to say to his FASTING in.

  My questions are.
  1. it can be the cause?
  2. How can I reset all of the values in the Bios to see if that fixes anything to start?
  3. is it possible to Flash the Bios with a version more old to see if this corrects the problems I have?

  I should also mention that 'System settings' has never worked for me. I get a message "Supervisor password check failed". Please note, there is no installed password.

  I will be grateful for any given solution. Thanks in advance.

  Can you please tell us which model of laptop you have exactly (the complete model name)?