Satellite Pro L850 - 1-8 - a few problems after the last update to BIOS version

Similar Questions

• Satellite U400 - PSU40E Synaptics touchpad problem after the recent update to BIOS

  Toshiba welcome,

  I've tested this in reverse, this is why the statement in the subject as it looks. After upgrading the bios of 3.00 to 3.50 touchpad loses its precision. Very rude and useless its like that.

  I tried different drivers, everything, but the only way to really solve this problem was it downgrade to 3.00 OR uninstall the driver Synaptics completely. Second solution, unfortunately, is unacceptable, because then I lose some features, like click on contact, which I don't use and control.

  Best regards

  Wojtek

  Hey Buddy

  I U400 and the BIOS has been updated to the newest one.
  The touchpad works like a dream. I m using Win XP and Vista and there is NO problems after BIOS update!

  In your case, this may be only a software problem and I think you can use the Toshiba Recovery disk and could reinstall the whole OS from the Toshiba drive

  It is a really radical solution because the whole HARD disk may be formatted, but if the resettlement of these two drivers touchpad didn t help then I think this would be the last solution.

• After the last update of BIOS that Satellite P100 locks with BSOD

  Hello

  Due to several problems meeting with updated Toshiba Satellite P100-221 (PSPA6E) launch second online BIOS updated. I have download and I solve problems with my video card and the race of missing keyboard. After a short period, they put on the update of the BIOS rd page 3 drivers.

  I'm trying to find what ever they change with this new update, but I na? t find anything. So I decided to update my BIOS again. Now as a result my system crash very often when I quit & restart my computer (blue screen).

  Microsoft advised me to reduce the video acceleration for video adjustment.
  Maybe can someone explain to me why I have this problem?
  I use the same drivers and software same as in the second update
  I can find BIOS previous to rewrite again, because this one works very well with my laptop?

  Thank you!

  Hi Sebasian

  I use very long books and I've never updated the BIOS if not necessary. What laptop works well, OS stabile, why should I do it? I don t care if new BIOS update is available or not. I've always been skeptical about the updates to the BIOS. That's just my opinion.

  As far as I know, it is not possible to downgrade the version of the BIOS without special tools and it can be done by service partners. It is not easy to tell if the BIOS is responsible for this, but if possible, try to send us illustrated if BSOD errors.

  If I were you I backup all important data and reinstall the recovery image, configure OS for my needs, and make sure that everything is clean pre-installed. My experience with BSOD were always related software.

• Problem after the last update for Windows 7 (11.11.2015): flashing in normal mode login screen

  I am running windows 7 on my laptop last night, that he day and when it's over he did not start the screen flashes and does not start I tried to do a restore of the system without any look can someone help thanks

  Original title: update

  Hi David,

  Thanks for posting your query in Microsoft Community.

  a. you have any Windows 7 installation media?

  b. What is the update's KB number?

  [To see which articles updates failed, try the following steps:]
  a. Open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
  [ b. in the left pane, click view update history.]

  If the update number is KB3097877, then reinstall the update KB should solve the problem. However, as you can not reach your office, I would first run auto repair with installation media and see if it helps you repair system files or not. For the execution of the task, I suggest you to try the steps below and see if it helps.

  Method 1

  When you use the recovery environment (Windows RE) to troubleshoot startup issues, first try the Startup Repair option in the System Recovery Options dialog box. If this does not resolve the problem, or if you have additional problems manually, use the Bootrec.exe tool.

  Because you cannot start the computer, you may need to create a bootable Windows installation media, and then do an auto repair, and if this does not help then you try to restore your computer to the previous date.

  Note: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  If you are using Windows 7 then the link provided below might help you to download and create installation media.

  Download Windows 7 Disk Images (ISO files)

  Method 2

  If the problem persists, try to rebuild the BCD by using the Bootrec.exe tool. To run the Bootrec.exe tool, you must start Windows recovery environment (Windows RE) . To do this, follow these steps:

  1. Place the Windows 7 installation disc in the disc drive, and then start the computer.
  2. Press a key when you are prompted. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
  3. Click repair your computer.
  4. Click the operating system you want to repair, and then click Next.
  5. In the System Recovery Options dialog box, click command prompt.
  6. Type Bootrec.exe, and then press ENTER.

  See the following link for more information:

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows

  If you are able to reach the office, and then try to Uninstall then reinstall the KB3097877 update and check if it helps resolve the issue permanently.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Application of cc 2015 Adobe from problem after the last update today 1 to August 15.

  After update CC 2015 today at 18:00, while opening the CC 2015 application, the following message appears:

  "The program can't start because MSVCR120.dll is missing on your computer. Try reinstalling the program to fix the problem.

  What to do now?

  Post edited by: Shuvashis Saha

  Hi Shuvashis,

  Please see this KB doc on your question: https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html

  Kind regards

  Rahul

• HP Pavilion dv6 Notebook PC audio problem after the last update of HP

  Hi after I updated my HP Pavilion dv6 Notebook PC, windows 7, core i5 yesterday my sound suddenly stopped working... I tried to restart all my BIOS by default.  go to Device Manager and uninstall my audio and restart to re install automatically, but its does not work...

  I really need help for instructions on how to fix this I am not a computer expert so I need step by step clear instructions!... so please help I really need my computer to be on the right track again coz im using this in school and project...

  Help, please!...

  Click on the link below. Enter your product number as that indicated on the Service tag on the bottom of the laptop (can be under the battery). You can also get the product number by pressing Fn + ESC key. After you enter the PN, click Next, then choose the software & Drivers.On the next page use the menu drop down to select your (probably Windows 7 64-bit) operating system. A list will fill with the drivers. Download & install the latest Audio driver.

  http://h10025.www1.HP.com/ewfrf/wc/siteHome?cc=us&LC=en

  ```````````````````````````````````````

  If still no sound, try a hard reset, works sometimes. Disconnect all external devices first.

  battery and power cord 1 / removal

  2 - Press the power button for 30 seconds

  3 reinstall only the power cord for the first start.

  4. turn on

• Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hi, I have 0xc0000142 error when I start the first pro after the last update, before that I had no problem playing first pro...!

  Hello Gene,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• After the last update problems

  Since the last update, I got very annoying problems of towing. Firefox continues to change my homepage Homepage of Mozilla. So am I looking for new ighome! and then reset the home page. Then it also changes my appearance to the default page. I like the one I have. So, I have to click on use default, then restart the look I want, stop and try again. I want to uninstall and do a clean installation takes time that I have yet.

  Hello

  It seems that a parameter has been changed on your new tab page. These changes are usually caused by bars of third-party tools or modules. I understand that you would like to know how to reset it. No problem, please follow the steps below:

  1. In the address bar, type Subject: config and press enter. The "this might void your warranty!" warning page may appear.
  2. Click on I'll be careful, I promise! to keep the comments: config page.
  3. Type browser.newtab.url in the search box to find it on the list.
  4. Double-click on browser.newtab.url and type on: newtab in the window that opens.

  Restart Firefox and open a new tab to ensure that the change has been made. If there is no problem with the plugins please see also: troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  Please post back with your results, we are happy to help you.

• My policy changed completely after the last update of Firefox. It's a little smaller, less fat and much less clear. Please tell me how to solve this problem.

  The default font used on sites like Facebook, Craigslist, Google etc. has become much worse since the last update. It is much less clear, looks almost like a chop and transparent. As if the part of the letters missing. Less "BOLD" and a little bit more smaller institutions. I would like to go back to the way in which the police used to look like, the way it does in Internet Explorer and Chrome.

  Hi miked91, this is probably caused by kb3013455 of update from microsoft that can cause problems of rendering fonts on vista:

  After you have installed the 3013455 security update, you may notice a degradation in quality of text in some scenarios. The problem occurs only on systems running Windows Vista SP2 or Windows Server 2003 SP2. Microsoft is researching this problem and will post more information in this article when the information becomes available.

  <sup>Reference: https://support.microsoft.com/kb/3013455</sup>

  an option may be to tackle this particular update for now until there is a fix from microsoft or you could also look at if there is a graphics driver update available on the Web site of the seller (intel/amd/nvidia) which could also be solved this problem in some cases.

• Satellite Pro L850-1DV - screen is blank when inserting the USB

  Hi guys

  some help please.

  I recently bought a laptop from Sat Pro L850-1DV the following specification

  Core-i5 2.5 Ghz
  8 GB RAM
  Win7 64 bit with SP1
  video driver = 8.15.10.2752
  DirectX version 11.0

  The problem is that whenever I have insert a USB device, the screen is blank. I then need to move the
  mouse or tap a key to bring the screen... it's really boring.

  Please is - can anyone help as to why this happens, and please suggest a correction.

  Thank you

  Hmmm... never heard of it. It happens when you connect any type of external device via USB port? I just want to know if it is some kind of general problem.

  Using Win7 preinstalled original or your own version?

• Satellite A200-23U - DVD - ROM problem after the firmware update

  Hello! I have A200-23U (TSSPcorp CDDVDW TS-L632H). I day first TO02, then TO03 firmare. No error has been shown. After the reboot, my device is locked (is not open / eject button or by any software) and ImgBurn (for example) can't find writers. In system devices now it is shown that:
  IDE\CDROMTSSTCORP_CDDVDW_TS-L632H___*boot*___\5&1AC5D6C0&0&0.0.0 (I think that there must be * TO03 * not * START *)

  What is the problem and how can I solve this problem?

  PS. sorry for my bad English)

  You can try to reflash the drive down to T02 OR you send the machine to an authorized service provider or they fix this problem.

  Could first check if the downgrade works?

  Welcome them

• After the last update a few minutes ago, Firefox open all web pages.

  I was on a local web page run by a local server on my intranet. Firefox was not open. I opened it (last time it worked successfully was a few hours ago). He did an update. After the update, he tried to open a web page in Firefox - failed. Local web page, I was sure would not open either. Web pages to function in Internet Explorer.

  Problem was Firefox hanging in the Task Manager - task once I stop the task, I re-run Firefox and had no issue. A big thank you to all who tried to help.

• Problem with Safari after the last update

  RE: Security update 2016-001

  Version of Safari 9.03 update

  Version of Yosemite 10.10.5

  Friday, I installed the latest update from security 2016-001. Since then, Safari is almost unusable.  Unable to connect to Pandora, unable to connect to my paying investment sites.  iTunes radio is very slow and almost no functioning.   Is anyone else having the same problem?

  I would appreciate help in resolving this issue.

  Thank you

  Phillip

  I was having the same problem and read a solution for this problem here: no internet after update of 2016-001

  If you have ESET cybersecurity or Pro is installed, uninstall and reinstall. Make sure that you have the newest version dmg before you start. The instructions in this thread, that I linked will not uninstall ESET. Uninstall using the uninstall tool. Shut down your computer. Restart and reinstall using the installation tool. It fixed for me. I had 2 days of the internet unusable for half of the sites I tried to visit. Even this site took 5 minutes to load. Either slow or no load on Safari and FF. Everything goes well today, although I've submitted a ticket with the people of Eset, they are working on a fix.

• I've used TrueCrypt for 2010 when it was installed on my computer by our office technology. I used it with no problems until the last update I installed on Tuesday evening. Since that time, I was not able to open TrueCrypt

  Tuesday night, I downloaded and installed the latest security update. On Wednesday morning at the restart, AVG Anti Virus intercepted a few Trojans and several files of phishing. I then proceeded to power work and tried to open TrueCrypt, which contains working files. I get this error message: MacFUSE file system is unavailable (- 1). I searched for the last 24 hours as he tried to do what work I can without these files for a solution to discover that MacFUSE is no longer supported (useless?).

  I tried to reverse the quarantine of the AVG files, I was wondering if those who were somehow the culprits who have been involved - which didn't work so then I ran AVG again completely to remove all people still. When I got home from work, I discovered that my Time Machine and AirPort have not communicated since Oct. 15. I'm in the middle of a new backup, which takes forever. I don't know what to do next. I hate the idea of restoring my computer to Oct. 15, when I was able to access the files. Is there a way to restore my computer to the State before the upgrade of security?

  I've seen it is called OSXFUSE I was wondering if I installed if she somehow would allow me to access the files in TrueCrypt and decided which was just fantastic.

  What would you recommend?

  MacBook Pro OS X Yosemite 10.10.5, 2.7 GHz Intel Core i7, 16 GB, 500 GB hard drive

  What would you recommend?

  Uninstall "AVG" and restore your Mac from a backup created before leave corrupting your system. Do not reinstall, or something like that, never.

  Uninstall, read and follow these instructions, paying special attention to the grammatically incorrect "Note" at the end of the page: everything-AVG-AntiVirus-for-Mac https://support.avg.com/SupportArticleView?q=uninstall+avg&urlname=How-to-uninst & l = en_US