Unable to connect after the automatic updates of Windows.

Similar Questions

• Problem with wireless connection after the automatic update of Service Pack 2

  Do not see my wireless modem to connect after that Windows Vista Service pack 2 and the update of security were auto-mis to update last night.  Can see modems of neighbors but not mine.

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  Or transfer your question in this forum: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Blue screen after the automatic updates in Windows Vista

  Automatic updates caused a blue screen that says STOP: c000218 {registry file failure} the registry cannot load the hive (file): \System\System32\Config\COMPONENTS or its log or replacing. It is damaged, missing, or not accessible in writing.

  Ideas: I don't know what happened when it restarted it started this

  • will simply not get to start it to connect screen or system repair
  • Error messages: STOP: c000218 {registry file failure} the registry cannot load the hive (file): \System\System32\Config\COMPONENTS or its log or replacing. It is damaged, absent, or not writable. :
  • Recent changes made to your computer: just the updates that was supposed to be important
  • What you have already tried to solve the problem: System repair, restoration of the system or safe mode do not work

  in this case, restore your netbook factory settings. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• After the automatic update of Windows 7 - Manager of tasks does not work

  Automatic update has occurred.  Now the Task Manager does not come with window with tabs upward.  Only a window with two columns ('Mission' and 'Status') and three option buttons ("end task", go to "and new task" ").  Even not a 'close button' - may not only close to the taskbar.

  Hi rw9683,

  ·         Have updates you installed?

  Follow these methods.

  Method 1: Performs a search using the Microsoft safety scanner.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

  Method 2: Follow the steps in the article.

  Using the Task Manager: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/using-Task-Manager-frequently-asked-questions

  Method 3: Scan the file system (CFS) auditor to repair corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

• Unable to connect to the internet after the automatic update

  Firefox has an auto update this morning and since then I always get the page "the connection was reset". MSN messenger work always for the internet connection is not the problem. It's on my laptop (I'm currently on my PC) and it is on Windows XP, the firewall is ESET Smart Security. I checked the error Console, and it is one that appears, "" Livemark Service: food processor received invalid channel for http://en-US.fxfeeds.mozilla.com/en-US/Firefox/Headlines.xml".

  This has happened

  Each time Firefox opened

  Is automatic update on June 27, 2010

  NVM I just had to change the automatic proxy connection settings
  the automatic update should have changed the settings

• I am unable to access the Windows XP updates and unable to set up the automatic update. I have not given an error code. I was only told I can't perform these functions.

  I am unable to access the Windows XP updates and unable to set up the automatic update.  I have not given an error code.  I was only told I can't perform these functions.  I don't have the windows disk that the computer came preloaded with Windows and I don't remember the Administor password I created 5 years ago.  Can anyone help?

  Assume that:

  http://support.Microsoft.com/kb/316524

  You receive an error message 'Administrators' only when you try to visit the Windows Update Web site or the Microsoft Update Web site

  http://support.Microsoft.com/kb/189126

  Microsoft's strategy concerning lost or forgotten passwords

  What I can offer: http://support.microsoft.com/kb/321305

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

• All browsers stop working after the automatic updates

  * Original title: Windows 8 - all browsers stop working after update

  Hi, I have a Dell 14R with Windows 8, standard configuration.  After the automatic updates pushed on 06-04-14, computer laptop start behaving strange - not able to connect to any external website.  Home page only on a browser worked.  Troubleshooting auto did not find any problems. I restored the computer to the last point saved, generated an error "cannot restore', perhaps due to MacAfee, but solved the problem.   Then I disabled the updates for windows, just in case.  Did you anyone has a similar experience lately and was able to locate and solved the problem?

  I've updated for Windows 8.1 over the weekend, it seems to work great so far.

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• computer crashed after the automatic update Tuesday night

  Hi, Kevin

  My computer crashed after the automatic update Tuesday evening. The message indicates that the demand for window vista (which initially provided with the Lenovo computer, that I bought new in 2007) is not valid. When I rebooted and you press F5, it offers 3 options 'Security Mode', but no return explicitly beforehand updated status.

  I'm not familiar with uninstalling and restoring systems. Can you walk me through the process? Can I uninstall or restore when the computer is in mode security (limited capacity)? How a WAIK/Windows PE image downloaded to another computer to help me with the computer that is out?

  Your suggestion to install SP2 apply to windows vista home basic version, 2007?

  Thank you!

  REMOVE your product key from your last post as someone can use your key and
  It will make a lot of grief

  Call or contact the manufacturer of the system since you are using an OEM version.

  See this thread.

  http://social.Microsoft.com/forums/en-us/genuinevista/thread/dd6dae5a-6659-4C84-aeb9-8f2d585a18eb
  Rob - bicycle - Mark Twain said it is good.

• Unable to get the automatic updates of Windows.

  Suddenly I'm unable to get the automatic updates of Windows.  When I use Windows fix - it, it is unable to do so, stating that automatic update components need repair.  Is there a way to repair the components?

  Hi Robert,.

  Reset windows update components.

  http://support.Microsoft.com/kb/971058

  Use the automated fix solution, then check windows update to see if it works.

  Additional information: If you are not fully patched for Windows XP SP3, download and install Windows XP SP3 from the link below.

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Ignore the warning text on the professionals and the network installation.

• How can I get my laptop to recognize my printer wireless after the automatic update?

  After the automatic update I couldn't open any program (Word, Excel, internet etc.) that I managed to resolve by restoring my laptop settings before the update. It seems to have worked until I went to use my printer. My laptop will not find my printer through devices and printers, and when I go to print a document, an error box pops up saying "Windows cannot print due to a problem with the installation of the current printer.

  Your help would be appreciated gratefully.

  You must view the windows update history and the KB updates that have been installed, that you believe that the cause of the condition.

  And also to give the brand / model of the printer and the laptop

• After the last updates of windows have problems with start up and now drivers

  Hello

  After the last updates of windows have problems with start up and now drivers. I get an error code 21 when I try to install the drivers AMD apparently missing.

  May 14, last night I had several (automatically) downloaded windows update

  Today, I was unable to boot my computer with Windows - tried the disk check, start checks etc, and eventually had to use System Restore (for help before the critical update to restore).

  Perfection, everything works, but knowing that windows will attempt to redo an automatic update, tried to check online - no one seemed to have a problem and (naivly) thinking I could always do another restore of the system, I rebooted again.

  Same thing worse. Could not do a sys restore either just before restarting or last night. Chose a date earlier (last week) but then lost the USB drivers and pilots display. Downloaded updated but refuses to let my AMD driver install Windows I have a very unpleasant screen... and I must now stop the installation of this update "critical."

  Would appreciate advice how do my installed display driver or whether anyone else has problems following this update

  Thank you

  Hi Jane,

  You have a disk to install Windows 7 with you?

  I suggest you to check the event viewer for error details report.

  Open event viewer.

  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer

• I bought a new laptop with Windows 7 installed. Whenever I restart it, it has installed updates which can take up to an hour or freezes. You can ignore the automatic updates of Windows 7?

  I bought a new laptop with Windows 7 installed.  Whenever I restart it, it has installed updates which can take up to an hour or freezes.  You can ignore the automatic updates of Windows 7?

  You can turn off the automatic updates, Yes, but doing so would leave your computer at risk. Simply put with him: after another reboot or two, you will be fully patched AND fix!

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I want to uninstall the automatic updates of Windows

  How to stop automatic updates for Windows 7 proffessional?

  Hi Pradeep,

  If you want to stop the automatic updates for Windows 7, follow these steps

  (1) go to the control panel

  (2) Windows Update

  (3) after the opening of Windows update, on the left side, you will find an option named 'change '.

  4) click on that and under important updates, select never search updates. Click OK.

  Fact!

• When you do the automatic updates of Windows Vista I get the "Security Update for Windows Media Format Runtime 11 for Windows Vista (KB968816)" = Failed__

  When you do the automatic updates of Windows Vista, I get the code below.

  'A security update for Windows Media Format Runtime 11 for Windows Vista (KB968816)' = failure

  • What should I do to fix this?
  • And what does this update actually?

  Thanks for any help provided.

  scrubie,
  If you go to programs and features, and then on the left side you should see a link for "Daily display installed."  Which would then show the list of updates with the State which will show you if it failed or not.

  Hope that helps. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.