Problems creating a PeopleTools datababse only 8.55 on Oracle 12 c

Similar Questions

• There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  There was a problem creating the destination folder. If please check the permission of folder or choose a different folder.   What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!

  This means that the folder you want to create is blocked because of file permissions. The drive or folder you are trying to create the destination folder is set to read-only, and your username does not have write permissions.

• Problem creating bodies of job definition in ADF ESS

  Hello
  I am facing problems in creating definition use of extended Type in Oracle ADF using Enterprse Scheduler Service bookstores.
  When I go to creating jobs, I get only basic work types in the dropdown list of "Job Type" inside the dialog box "Create Job Definition.
  I have already added the 'extJobTypes' directory to the resources for my project, but still extended types are not available for the creation of the job definition.
  
  I need to create a working HostScript definition, but I don't see that as an option in the DDN definition dialog box is.
  
  I followed the tutorial held the location below.
  http://fmwdocs.us.Oracle.com/doclibs/FMW/E10285_01/appslib7/ doc.1111 /e10308/soa_ess.htm#OADEV57744
  
  Is there anything else I need to do?
  
  Thank you
  Dhaine

  First things first - you are an internal employee Oracle (as indicated by the internal link only), so it may be better to ask on the internal Oracle forums, wherever they are.

  Secondly - I wish that OTN would create a forum (s) Fusion Apps!

• Problem creating hierarchy based on 2 physical dimension tables

  I'm having a problem create 1 dimension logic with a hierarchy of exploration, based on two separate physical dimension tables. The errors I get when navigating in the exploring hierarchy is:
  "Cannot find coverage source logical table to the columns of the logical" &
  "Missing join between the logical tables.
  
  I use OBIEE 10.1.3.4
  Here are the details of what I have set up as:
  
  Physical layer:
  Table DIM_ORG with the dimension columns:
  -dimension_key
  -org_total_code
  -org_total_description
  -org_detail_code
  -org_detail_description
  
  Dimension table DIM_DEPT with columns:
  -dimension_key
  -dept_total_code
  -dept_total_description
  -dept_detail_code
  -dept_detail_description
  
  FACT_SALES table with columns of facts:
  -fk_org
  -fk_dept
  -sum_sales
  
  Physical joins:
  FACT_SALES.fk_org = DIM_ORG_dimension_key
  FACT_SALES.fl_dept = DIM_DEPT.dimension_key
  
  Business model and the mapping of layer:
  I created a logical dimension ORG_DEPT. It contains two sources of logic table (DIM_ORG & DIM_DEPT) and the following logical columns:
  -All departments (mapped to dept_total_code)
  -Organization (mapped to org_detail_description)
  -Organisation number (mapped to org_detail_code)
  -Department (mapped to dept_detail_description)
  -Department Code (mapped to dept_detail_code)
  The logical key of the company is based on the combination of number of organization & Department Code
  
  The hierarchy, I need is: all departments-> organization-> Department so I created the following hierarchy for ORG_DEPT:
  -Total level containing: all departments
  -Organization level containing: company (defined as logical level key) number & Organisation (als defined the key level drill)
  / Department detail level containing: Department (defined as logical level key) Code and the Department (defined as key level drill).
  
  In the LTS of the ORG_DEPT dimension, I've set levels of content for sources:
  DIM_ORG: Level of organization
  DIM_DEPT: Level of detail Department
  The LTS non - joins inner - came against the associated physical tables.
  
  I created a logical fact table (based on the physical fact table) SALES and joined him on the ORG_DEPT logical dimension table.
  In the LTS, level of content for ORG_DEPT is part of the level of retail service. Non - joins inner were aded against related physical tables.
  
  When I create a report in response to test the hierarchy and select only "all departments' I get the value of the returned correct size. When I try to break through to the next level, I get the following ODBC error:
  "Could not find coverage source logical table for logical columns: [all of them]." "Please check more detailed level keys are correctly mapped.
  
  When I create a report in responses and select "Every department" and "Sales", I get the correct result. When I try to break through to the next level, I get a different ODBC error:
  "Lack of join between the logical tables DIM_DEPT and DIM_DEPT: there must be at least a physical link to join between the underlying physical tables.
  
  All suggestions are welcome!
  
  Thank you!

  You have no relationship defined between the Department and org.

  You can either:
  a. create a table of physical dimension with a composite key of org_id & dept_id if there is a relationship defined somewhere, then to obiee model as you have already done, but in the physical layer on the composite key join
  b. model your exisitng as two-dimensional and two hierarchies tables and set up a path of forest favorite between them according to your needs.

  Kind regards

  Robert

• Hi people. Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Intend to purchase Apple Watch USA and use it in Europe. Will this be a problem? Can I use only a simple switch of 3rd party? I'm going to hurt same hardware or software?

  Hello

  You will be able to use the watch in Europe.

  There is no regional differences in the hardware and the software can be configured to your chosen region. The supplied USB power adapter will have to pine trees located in the United States. A travel adapter will allow you to connect it to the European outlets.

  Alternatively, you can buy an Apple USB power adapter that is located in your country of destination / country.

  For example:

  • 2-pole:
    • http://www.Apple.com/FR/shop/product/MD813ZM/A/Adaptateur-secteur-USB-5-w-Apple? FNODE = 83
  • UK 3-pin:
    • http://www.Apple.com/uk/shop/product/MGRL2B/A/Apple-5W-USB-power-adapter-folding - pins? FNODE = 83

• 12.4.3.1 update volume problems created?

  12.4.3.1 update volume problems created?

  Hello

  I had no problem with the Volume in the latest version of iTunes. Can you give more details about the problem you are having?

  Jim

• Can software update on iphone cause problems when my computer can only move to Mountain Lion?

  Can software update on iphone cause problems when my computer can only move to Mountain Lion?

  When my computer can only be upgraded to Mountain Lion?

  Any Mac that can run Mountain Lion can run El Capitan, as long as the conditions are identical.

  

  Too little information: you must identify the model of your iPhone and explain exactly your problems. There is no way that anyone would be able to help otherwise.

• I can't open my pictures folder. Error message says I don't have permission! I ran disk utility and found no errors. How this could have happened and how can I fix this problem? I'm the only user.

  Suddenly, I can longer open my pictures folder. I tried to move a picture to the folder to see what is happening and received an error message saying I was not allowed to display the contents of the folder and if I move the picture here, I won't be able to see. I ran disk utility and found no permissions error.

  How this could have happened and how can I fix this problem? I'm the only user. No one else has ever physical access to my computer. However, I sign up for Skyhub a few weeks ago and copied the contents of my Macbook it. Since then, a "Remote disk" icon on my hard drive. This would be part of the problem?

  Select it, choose get the information on the file menu, open the section sharing and permissions and give you access.

  (141083)

• Problem creating ad hoc network-error: Windows could not set up the network.

  Original title: problem creating ad hoc network

  Hello dear,

  When I tried to set up an adhoc network and after entering the name and password of the network. Following up error message pop (Windows could not set up the network).

  I use windows 7.

  P.S. before I used to create the ad hoc network with no problems. But now no more.

  Kind regards

  Ana Paula Yousef

  Hello

   
  Did you change in the computer before this problem?
   
  I suggest to go through these steps and check.
   
  Method 1:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  Error message when you try to connect to an ad-hoc connection in Windows Vista or Windows 7: "Windows cannot connect to " http://support.microsoft.com/kb/946481 ".
   
  You can also check:
   
  Set up a computer-to-computer (ad hoc) network.

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-computer-to-computer-ad-hoc-network

  Ad-hoc networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/ad-hoc-networking-how-the-network-with-the-funny-name-can-make-your-life-easier

• Problem creating the destination for Lightroom 6 folder

  Just upgraded to Lightroon 6. Now I have a problem creating the destination folder. Already checked the folder permissions. Even tried a new folder nothing helps. A lot of space on the computer.

  Don't know who to turn to next. Is this a problem of individual computer?

  You must use a computer with permissions of administrator account

  Also, do a right click on the installer and select RUN AS ADMINISTRATOR from the popup option window to see if that helps

• I am able to create completely private applications only accessible via a password unique and pushed back to a handful of people?

  I am able to create completely private applications only accessible via a password unique and pushed back to a handful of people?

  It is possible through the signed app company DPS working with law services.

  If its really important, but it is also possible simply by sharing Folios created a unique Adobe ID and giving this ID/password to targeted individuals so that they can connect with the Adobe viewer application and enjoy the content.

• Problems creating a DB on ASM 11.2.0.1 10.2.0.4/11.1.0.7

  Hello
  
  I have some problems creating a DB 10.2.0.4/11.1.0.7 on top of ASM 11.2.0.1 using dbca. I can't get past step 7 when I select the DSO as a storage device.
  
  Here are the steps I did:
  
  -Install a 2 11.2.0.1 with ASM and Clusterware node RAC cluster, it worked well.
  -Set the 'Compatibility DB' 10.1.0.0.0 on in ASM disk groups.
  -Installed and configured a 11.2.0.1 database on this cluster, this has worked.
  -Installed software DB at separate Oracle 10.2.0.1.
  -Updated installation of 10.2 to 10.2.0.4.
  -Installed software DB at separate Oracle 11.1.0.6.
  -Updated installation of 11.1 to 11.1.0.7.
  
  Now, when I run dbca (it produced both of the O_H 10.2 and 11.1) in step 7 in the wizard I select "Select ASM as storage" and then when I press Next, I get this error message:
  
  "DBCA couldn't start the ASM instance is configured on this node. To proceed with the creation of the database using ASM, you need the ASM instance to be operational. You want to re-create the ASM instance on that node? "
  
  In the dbca log file I see "ASM present but is not activated, user mark..."
  
  What should I do to be able to create a DB 10.2 on 11.2 ASM? I also tried to put TNS_ADMIN to the directory of network/admin under the grid infrastructure, however, this does not work eitther, I still get the same problem.
  
  Any ideas what are the measures that I have to do in order to create a 10.2 / 11.1 DB on top of 11.2 Grid Infrastructure?
  
  Thank you

  It seems that the problem is related to the following bug:

  Bug.8288940 (74) TB - CMP 11106 DBCA TRY TO START 11.2 ASM WHICH IS ALREADY in PLACE AND REPORT FAILURE

  After applying the hotfix 8288940 at home 10 g DB, the creation of data base RAC succeeded.

  Hope this helps,

  Lisa Vance

• How create the CSV file delimited by tabs using ORACLE utl_file?

  How create the CSV file delimited by tabs using ORACLE utl_file? Please provide the code sampl.

  This isn't a problem with Oracle, it is a problem with the way you open the data in Microsoft Excel.

  In Excel, you want (depending on your version may vary slightly)...

  Office 2010...

  1. go in the Ribbon "Data".

  2. click on 'text '.

  3. Locate and select your file, and then click "import."

  4 step 1 of the wizard - choose "Delimited", then click on "next >".

  5. step 2 of the wizard - choose "Tab" as the delimiter and click on "next >".

  6. step 3 of the wizard - define types of column as needed (if necessary) and click on "Finish".

  7. check where you want the data in the worksheet.

  Data is loading now in single cells as you expect.

  If you just double-click the CSV, Excel is apparently assuming that it will be separated by commas and does not recognize tabs as separators, unlike when you rename the file with a .xls extension where it examines the file, complains that it is not a content .xls and asks you to confirm that you want to continue loading and then intelligently recognizes the tabs and the format for you.

  As I said, not a problem with Oracle, just a problem with the MS Excel software.

• How to create the script to compile procedure files in oracle - urgent deadline...

  How to create the script to compile procedure files in oracle.    about to go live and have much .prc pkg in a directory usr/tmp/ar... Po... human resources etc. need to create a script to compile all the files in the folder, then do not open all necessary .prc suggestions on how to do it.   Thank you Tom.

  (1) an urgent need, ASAP,... are words that do not in a forum of volunteer. We are here to help if you need it now, for free, open a SR.

  (2) oracle procedures are not files.

  (3) I think you are trying to run operating system packages, no Oracle procedure. right?

• Good way to create templates and to only deploy - "no problem of Internet access.

  I'm new to ESX and I have tons of networking with VM issues, I am deploying to a model.  Can someone tell me if I do something wrong?

  We use

  vSphere Client 4.1.0

  vCenter Server 4.1.0 build 345043

  It is a brand new installation of W2k8 32-bit and w2k8 R2 SP1.  The machines work fine when I create them from a CD.  When I turn them into one model and "Deploy Virtual Machine this model" is when things go wrong, all the machines I have deploy have network problems.

  That's what I do

  • Install VMWare tools v 8.3.7 build 341836
  • Apply all updates from MS-based VM
  • I have check them as a model
  • Deploy the virtual machine for this model
  • Give it a name
  • Choose the customiztion comments-> customize using the Customization Wizard
  • Use the virtual machine under the name of the computer
  • Give him the windows license product key
  • Give him a password
  • set the time zone
  • Nothing in the race once
  • Network - default settings
  • Task force - task force
  • Where is the operating system-> options I check 'generate new security IDS (SIDS).
  • Save the specification - I can't verify anything here, but I wish I could
  • Finishing
  When that it deploys, the deployed machine gets and IP address, but it is usually said "local only" and it cannot access to the internet or other computers in the environment.
  I can click on the x next to the internet and start the Windows Network Diagnostics and when it ends says:
  "Your computer seems to be configured correctly, but the device or resource (primary DNS server) does not.
  I have disabled the firewall, enabled the firewall, deleted from the virtual network card, changed nic types (currently using the vmxnet3), tried all the tricks in the book that I can find on google and nothing works.
  I got a machine deployed and run sysprep after the fact and that did not help anything.  I may be wrong but I think that sysprep is not necessary if you use the Customizing of comments, is that a correct assumption?
  I created and XP VM and created a template out of it, when I see him, networking is fine.
  Thanks in advance for any help you can provide.

  I think you're right, it looks like a problem with the switchport configuration.