Problems crossing timestamp variable block-SQL command not properly ended

Similar Questions

• SQL command not properly ended.

  Hello
  I have connected the aplication to the oracle database in developer j. I used the Insert buttons and validation included.
  For debugging application it runs correctly. but sometimes it gives error sql command not completed successfully.
  I checked the requests when it runs successfully, it runs the query ' insert into Schema_name.table_name (column names) values (?)'.
  but when it gives an error it runs the query ' insert into Schema_name. Schema_name. Schema_name. Schema_name. Schema_Name.table_name(column names) VALUES (?) e
  
  Can someone tell me what is the reason of it?
  
  Thank you.

  Can you try to change your query of

  SELECT CD_ID, Data_Type, Data_Value, Misc1, Misc2 FROM Sample_ADF_FinIQ_Common.Common_data
  

  TO

  SELECT CD_ID, Data_Type, Data_Value, Misc1, Misc2 FROM Common_data
  

  Note that I deleted the schema name of the query. Specific no reason why you use in front of the table schema name (I assume that you have created the connection to the schema on which you perform these operations).

  Arun-

• Error: Command not properly ended SQL...

  The code someone tell me what I am doing wrong in this code? It is said that a SQL command not properly ended...
  
  Thank you
  
  Tom
  
  
  SELECT D.DEPOSIT_ITEM_DT,
  Sum (D.DEPOSIT_ITEM_AMT) AS DEPOSIT_ITEM_AMT,
  S.SUSPENSE_DT,
  S.ORIGINAL_AMT
  OF DEPOSIT_ITEM D
  
  
  FULL JOIN
  (
  Select SUSPENSE_DT,
  SUM (ORIGINAL_AMT) AS ORIGINAL_AMT
  OF SUSPENSE_ITEM
  SUSPENSE_DT group
  ) S
  
  ON D.DEPOSIT_ITEM_DT = S.SUSPENSE_DT
  
  D.DEPOSIT_ITEM_DT group, S.SUSPENSE_DT
  
  Where NVL(D.DEPOSIT_ITEM_AMT,0)! = NVL(S.ORIGINAL_AMT,0);

  Hello

  835780 wrote:
  The code someone tell me what I am doing wrong in this code? It is said that a SQL command not properly ended...

  Please post the complete error message you got, including Illll numbers. Parts that you don't think are important, like line numbers, can help someone else find the problem.

  In your main query, the WHERE clause must go before the GROUP BY clause.

  In SQL * Plus, the SQLBLANKLINES parameter determines if you have completely empty lines, or lines containing nothing else than a white space in the middle of an SQL statement. By default, you can ' have empty linest, but if you really want to, you can override this setting at a meeting by saying:

  SET     SQLBLANKLINES   ON
  

  or you could put comments on lines incriminated, so that they are more completely blank, like this:

  SELECT        D.DEPOSIT_ITEM_DT,
         Sum(D.DEPOSIT_ITEM_AMT)      AS DEPOSIT_ITEM_AMT,
         S.SUSPENSE_DT,
         AVG (S.ORIGINAL_AMT)      AS ORIGINAL_AMT     -- See note, below
  FROM        DEPOSIT_ITEM D
            --
            --
            --
  FULL JOIN
  (
       Select        SUSPENSE_DT,
              SUM(ORIGINAL_AMT)     AS ORIGINAL_AMT
       FROM        SUSPENSE_ITEM
       Group BY  SUSPENSE_DT
  ) S
            --
            --
  ON        D.DEPOSIT_ITEM_DT      = S.SUSPENSE_DT
            --
            --
  Where NVL(D.DEPOSIT_ITEM_AMT,0) != NVL(S.ORIGINAL_AMT,0)
            --
  Group BY  D.DEPOSIT_ITEM_DT, S.SUSPENSE_DT
  ;
  

  If s.original_amount is not in the GROUP BY clause, then it cannot be in the SELECTION clause unless it is the argument of an aggregate function. I don't know what you want to do here, so I can't say with certainty how. This is unrelated to your current problem, but once solve you your current problem, you will get other errors because of it.

  For best results, always post a small example of data (CREATE TABLE and INSERT statements) and the desired results of these data, whenever you have a question.
  It never hurts to say what version of Oracle you are using.

  Published by: Frank Kulash, February 25, 2011 17:33

• command not properly ended

  Can someone explain why this error occurs?
  
  ORA-00933: SQL not correctly completed command.
  
  SELECT u.id LIKE username, (SUM (CASE WHEN c.teachermark = 0 1 THEN 1 ELSE END) * 100 / 19) LIKE rawgrade, MAX (c.teachertimestamp) AS dategraded FROM m_user AS u LEFT JOIN m_checklist_check AS FROM c m_user LIKE u LEFT JOIN m_checklist_check AS c ON u.id = c.userid WHERE c.item IN (21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,3 AND u.id IN (38392) GROUP BY u.id

  SQL> select * from dual as T;
  select * from dual as T
                     *
  ERROR at line 1:
  ORA-00933: SQL command not properly ended
  
  SQL> select * from dual T;
  
  D
  -
  X
  

  So, delete 'UNDER' in FROM CLAUSE:
  Not ' m_user LIKE u", should be"ROM m_user u.

• Error "Command not properly ended SQL" CASES

  This error is driving me crazy... I have read several threads and google it so much, I am sure its obvious that miss me, but can someone help to point out? I get the not properly completed "SQL command" error and its location the | just before the case statement. Here's my request, I haven't posted a CREATE TABLE because I think it's just my syntax is incorrect?

  SELECT

  f.CT_ID,

  f.BUSINESS,

  f.CT_DS,

  d.ETL_DT,

  d.ACTIVITY_DT,

  d.MINUTE_KEY,

  d.FCST_CONTACTS_RECEIVED

  Of

  (LIGHTHOUSE. IEX_CT_DIM b

  JOIN INTERNAL LIGHT. D THE IEX_CTACTIVEFORECAST (b.CT_KEY = d.CT_KEY))

  JOIN INTERNAL LIGHT. TBL_GEN_CT_BUSINESS f

  WE (f.CT_ID = b.CT_ID)

       || CASE WHEN F.CT_DS = END "THI Spanish' THEN 'MODERATE_NR' AND

  (f.BUSINESS IN ('THI_PL', 'THI_ESC')) AND

  (d.ACTIVITY_DT BETWEEN TO_DATE)

  27 January 2014 00:00:00 ',

  "MM/DD/YYYY hh24:mi:ss")

  AND TO_DATE)

  27 April 2014 00:00:00 ',

  "MM/DD/YYYY hh24:mi:ss")) AND

  (f.EFF_DT = TO_DATE)

  29 January 2014 00:00:00 ',

  "MM/DD/YYYY hh24:mi:ss")) AND

  d.ETL_DT = (SELECT

  MAX (ETL_DT)

  Of

  LIGHTHOUSE. IEX_CTACTIVEFORECAST

  WHERE

  ACTIVITY_DT = d.ACTIVITY_DT AND

  CT_KEY = d.CT_KEY AND

  MINUTE_KEY = d.MINUTE_KEY)

  Means, you try to select ct_ds. If ct_ds = "Spanish THI", then you must replace that Word with "Moderate_nr". If it is put like this the case statement in the selection as list below

  SELECT

  f.CT_ID,

  f.BUSINESS,

  DECODE (F.CT_DS, 'Spanish THI', 'MODERATE_NR',F.CT_DS) ct_ds,.

  d.ETL_DT,

  d.ACTIVITY_DT,

  d.MINUTE_KEY,

  d.FCST_CONTACTS_RECEIVED

  Of

  (LIGHTHOUSE. IEX_CT_DIM b

  JOIN INTERNAL LIGHT. D THE IEX_CTACTIVEFORECAST (b.CT_KEY = d.CT_KEY))

  JOIN INTERNAL LIGHT. TBL_GEN_CT_BUSINESS f

  WE (f.CT_ID = b.CT_ID)

  (f.BUSINESS IN ('THI_PL', 'THI_ESC')) AND

  (d.ACTIVITY_DT BETWEEN TO_DATE)

  27 January 2014 00:00:00 ',

  "MM/DD/YYYY hh24:mi:ss")

  AND TO_DATE)

  27 April 2014 00:00:00 ',

  "MM/DD/YYYY hh24:mi:ss")) AND

  (f.EFF_DT = TO_DATE)

  29 January 2014 00:00:00 ',

  "MM/DD/YYYY hh24:mi:ss")) AND

  d.ETL_DT = (SELECT

  MAX (ETL_DT)

  Of

  LIGHTHOUSE. IEX_CTACTIVEFORECAST

  WHERE

  ACTIVITY_DT = d.ACTIVITY_DT AND

  CT_KEY = d.CT_KEY AND

  MINUTE_KEY = d.MINUTE_KEY)

  Post edited by: 000000

• COMMAND NOT PROPERLY ENDED ORA00993:SQL

  Hi am having this error in this query

  SELECT EMPNAME,EMPNO FROM EMPLOYEE
  ORDER BY EMPNAME,EMPNO
  UNION
  SELECT EMPNAME,EMPNO FROM EMPLOYEE
  ORDER BY EMPNAME,EMPNO
  

  but when I delete order by is ok

  get rid of the table alias in your order by...

  order of unit_cde_frm, dept_cde_frm, wrk_req_no

• SIEBEL_STRING_REFCOUNT variable of environment was not properly set

  Hi all
  I'm having a problem with the results of the EVT.
  One of the EVT gives explanation as verification failure below
  SIEBEL_STRING_REFCOUNT variable of environment was not properly set
  Explanation:
  Make sure you that the Siebel "SIEBEL_STRING_REFCOUNT" environment variable which controls reuse memory consumed by the data string is not set.
  
  
  I tried to check support.oracle.com and Setup Guide, and Performance tuning guide. But there is refrence to this parameter in terms of best pracirce or a recommendation.
  
  Have a clear population of this parameter.
  
  I use Siebel 8.0 on Windows platform and have used the standard EVT.ini as in Doc-ID 477105.1
  Thank you-

  Hello

  I think that SIEBEL_STRING_REFCOUNT is an environment variable set to solve the problems of siebel and evt is to make sure, that it is not set. However, if you do not have this message or need additional information concerning this variable open a case in support.oracle.com asking for additional information.

  It will be useful,

  Wilson

• Barracuda Backup - changed block tracking does not properly

  Greetings,

  
  

  What is going on:

  In a Word. I am trying to solve a problem with a backup of Barracuda and the block change tracking.  It happened from the server (as well as the Barracuda 190) has been installed long ago.

  
  

  Long story short. With CBT activated (changed block Tracking) Barracuda is supposed only to save "disk blocks has changed."  She doesn't at the level of virtualization, no comments. In my case, it's back up about 124 GB every night. (2-3 hours of the device), and then from 10 to 12 hours to move to the cloud.

  
  

  MY SYSTEM:

  There is only 1 VM (comments) on the host computer. The two drives on the computer virtual (comments) are a 60 GB drive OS (SBS Server Essentials of 2012) and 100 GB data disc.  Both have 33 GB used on each of them (66GB total).  Changed nightly expected data should be an absolute maximum of 6-8 GB each night much less commonly.

  Nothing about the host OR virtual machine (guest) server is added to the 124 to 128 GB that says Barracuda is saved.

  
  

  HOW CAN I KNOW IT IS NOT WORKING PROPERLY? :

  I have two other systems in separate buildings that work as expected. So, I have an A, B, C comparison.  A and B are working properly. C is not.   They are all the same hardware platform HP ML350p Gen8. They are all configured as except for the sizes and quantities of drives in the RAID 5 group. They are all ESXi if the one in question is on 5.1.0, and the other two are on 5.5.0.
  

  
  

  Not that it matters, but the guests on these systems are: host a system has a brand new 2012 R2 STD Server .  B host has a system "autonomous converted" SBS 2011 .  C host system has a new 2012 Essentials server.

  
  

  WHAT DID I TRY? :

  I made sure all the settings in the settings have CBT enabled and set to true.  I tried to re - set up a new selection of backup within the Barracuda 190. I made contact with technicians Barracuda of 1st and 2nd level support on several occasions. Initially, they said it was a problem of snapshot.  I looked the better shots I knew how (I'm a noob, but I got some great info here about how to look at snapshots and VM running of stains from p_hall), then when they couldn't tell me where in the phase of snapshot, it was, they said 'it works as expected. , (and even if I have only 66 gb of disk space used on a total of 160 GB on reviews) "isn't really 125 GB backup every night. It just reports that it is.  Still my bandwidth says otherwise.   WHAT !!!!!!!!???????

  
  

  Finally, I took the well-known Barracuda of the FD (from system B Barracuda) and put it on the DP (in lieu of system C Barracuda) for a few nights.  He behaved exactly like original C system Barracuda. He supported 128 and about 147 GB the first night the next two nights.

  
  

  See attachment for samples of the reports at the end of last year backup 3 systems. Yes, they are older, but the results are the same.

  
  

  Any suggestions on how to fix this?  Thank you.

  
  

  I want to mention that my problem is now solved. Still using CBT, my nightly backups are more in line with what is, was expected.  Instead of backup 128 GB EVERY night (I still don't know whence the figure), I support anywhere from 3 to 15 GB per night.  A difference.

  The problem has been resolved with a simple upgrade to ESXi 5.1 to 5.5 upd 2.  No other changes made.

  Wouldn't be an accurate assumption that unlike VM KB 1020128 that CBT is, in fact, NOT compatible with the ESXi5.1?

  I'll be the first to admit that VMWare is not my forte.  That said, I'm rather discouraged that there no one answer to my post with suggestions.  I post in the wrong place. Poor choice of title/key words? It was poorly made? Unintelligible?

  According to me, that I was very thorough in my research on the issue.  I found this which mentions clearly the CBT is supported in ESXi 4 and more.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1020128

  I was diligent in troubleshooting up to the point where I pretty much dismissed everything except the host operating system.

  Not knowing how big the community is, I would think that there is someone out there with my exactly the same problem, or at least there was someone out there who was successfully in 5.1 ESXi with CBT on a system of Barracuda.

  I am open to any suggestion that may make future messages/questions to gather more responses.

  Thank you.

• ORA-00933 sql is not properly completed.

  Dear members,
  
  I have the following query in Report Builder 10g,
  
  Select a, b, c
  FROM table1
  where a = 12
  
  & p_whr_fy & p_whr_supp & p_whr_bt & p_whr_mat_spec & p_whr_lc_num & p_whr_cotton & P_WHR_LOC_ID
  
  Union of all the
  
  Select a, b, c
  from table2
  where a = 12
  
  & p_whr_fy & p_whr_supp & p_whr_bt & p_whr_mat_spec & p_whr_lc_num & p_whr_cotton & P_WHR_LOC_ID
  
  Here I used the lexical settings, and with spaces in the lines its ok but when trying to change the query / remove spaces in the lines, it gives the error.
  
  ORA-00933 sql not successfully completed
  
  With regard to:

  Hello
  Check your default values for substitution variables, at least one of them is not empty and causes an error.
  kikolus

• Cold Fusion Sql does not properly

  When running the code through this function, it does not give me a syntex error and not actually delete all records either. There could be the option to remove anywhere from 1 plug up to several hundred... form.chk_email is a checkbox from the form of presentation to access this page. I want to click the box to say that automatically sends to remove from the db. Here's the code for the checkbox as well.
  

  I just found the problem, it is with the checkbox on the form:

  It should have been:
  

  Instead of
  

• Problem with my header / footer displays do not properly on a few pages of my site

  For some reason, my master header / footer is not correctly displayed throughout the entire site. It is fine on a few pages, but is misaligned and not pick up the correct fonts on three other pages. These are be the same pages that I recently updated and made changes to. These changes were also made in the middle of an update (do not know if that has anything to do with him).

  Here is how it is supposed to look: WelcomeTANYR Healthcare

  This is where she is incorrect: that we AreTANYR Healthcare

  Any help would be greatly appreciated!

  Thank you!!!

  Could you try to export to HTMLand see (when you open index.html) if pages look good, or if they also display bad manners? If they look too large, then there is definitely something wrong with your file of Muse . Please post one or more screenshots of your page (s) to Muse, to reveal how the page was built. If they look very well, so there is a glitch in the server Of Business Catalyst .

• Classic report command SQL ORA-00933 not properly completed when you enable sorting

  Hello
  
  Oracle 11g r2, APEX 4.1.1.00.23.
  
  I have a few reports of type SQL Query (PL/SQL, returning the SQL query function body), so the source is as follows:
  

  begin
    return points_ui.get_points_query(:P0_FILTER_TYPE);
  end;

  Without no sort option, the report is made successfully.
  
  But I got the following error during a test to enable the sorting option for a column:
  

  ORA-00933: SQL command not properly ended

  I read about this error on the Oracle forums, and I saw it was a bug in an older version, but I thought it was fixed in 4.0.2...
  
  Any help would be appreciated.
  
  Thank you.
  
  Yann.

  The Order By clause and the column sort is kind of mutually exclusive.
  If your SQL in the report area has an Order By inside and you apply the sort order on the columns in the report attributes tab, then errors occur during execution.

  Concerning

• GET with multiple PL/SQL commands

  Hello!

  I m try to load a file into sqlplus using the GET command. I can't use or BEGIN (if you want to know why: set escape)

  The problem is that this file has more than one command, like this:

  drop table teste_cardia;
  
  create table teste_cardia (
      id number,
      nome varchar2(255)
   );
  

  When I run the loaded file (with /). I got this error:

  C:\Cardia>sqlplus /NOLOG @aaaa.sql
  SQL*Plus: Release 11.1.0.7.0 - Production on Qua Fev 4 10:42:16 2015
  Copyright (c) 1982, 2008, Oracle.  All rights reserved.
  
  SQL> CONNECT SATIR/XPTO11TB@IDEV10G
  Conectado.
  SQL> SET SQLPROMPT "SQL>"
  SQL>SET SERVEROUTPUT OFF
  SQL>SET LINESIZE 255
  SQL>SET SCAN OFF
  SQL>SET DEFINE OFF
  SQL>SET SERVEROUTPUT ON
  SQL>SET SQLBLANKLINES ON
  SQL>SET VERIFY OFF
  SQL>SET ESCAPE ON
  SQL>GET teste4.sql
    1  drop table teste_cardia;
    2  create table teste_cardia (
    3      id number,
    4      nome varchar2(255)
    5*  );
    6  /
  drop table teste_cardia;
                         *
  ERRO na linha 1:
  ORA-00911: invalid character
  

  If I run a file with a single command without «;» This works.

  I tried to replace ';' by ' / '. Didn t work. Tried using sqlterminador, cmdsep and none of it worked.

  It s possible to have multiple commands in a file and run with GET and /?

  Hi Mario,.

  In my view, that the GET command has no for this.

  The documentation says https://docs.oracle.com/cd/B10501_01/server.920/a90842/ch13.htm

  GET loads a host operating system file in the SQL buffer.

  And in the SQL buffer, you can execute only one statement at a time.

  You can not do this

  < verdi_takt:op56 > select user from dual; select sysdate from dual;
  select user from dual; select sysdate from dual
                       *
  ERROR at line 1:
  ORA-00911: invalid character
  
  < verdi_takt:op56 > select user from dual
    2  select sysdate from dual;
  select sysdate from dual
  *
  ERROR at line 2:
  ORA-00933: SQL command not properly ended
  

  So your file with the command of 2 or more must fail.

  concerning
  Kay

• drop the triggers in the SQL code causes not properly completed order.

  running the following command in SQL developer, giving the following error message
  ORA-00933: SQL not correctly completed command.
  What I am doing wrong
  

  Begin  
  For I In (Select Trigger_Name, Owner From Dba_Triggers Where Trigger_Name Like 'ABC%' And Owner = 'my_schema')
    Loop  
      Execute Immediate 'DROP TRIGGER '||I.Owner||'.'||I.Trigger_Name;  
    End Loop;  
  End;

  Published by: Mo2 on April 16, 2010 12:21
  
  Published by: Mo2 on April 16, 2010 12:24

  MO2 wrote:
  Yes he has.
  is an example of the names BIN$ + i6ls2WnR/Svz0wA5LSG8A == $0

  In fact these triggers created by the database after I have remove the tables. is there a way to avoid their creation?

  drop trigger BIN$+i6ls2WnR/Svz0wA5LSG8A==$0;
  drop trigger BIN$+i6ls2WnR/Svz0wA5LSG8A==$0
                   *
  ERROR at line 1:
  ORA-00933: SQL command not properly ended
  

  Yes, oracle complained about it during a fall.
  These objects will be created if you recyclebin on.

  You can either disable your recyclebin or you can purge these items in recyclebin after a fall. Make sure that you require this function or objects in the future.

  Concerning
  Anurag

• Buffer SQL commands (get, run, save, etc.) in Developer SQL does not?

  I am a developer SQL 3.1.07.42 Windows 7 64 bit with java 1.7
  
  I have c:\test.sql that contains

  PROMPT Working

  and c:\testscript.sql that contains

  set echo on
  set serveroutput on
  /
  GET c:\test.sql
  SAVE c:\test_working.sql
  LIST 1 LAST
  RUN

  If I open a new worksheet and type:

  @\testscript.sql

  then press F5, I get:
  

  @\testscript.sql
  
  set serveroutput on
  
  /
  
  GET c:\test.sql
  
  SAVE c:\test_working.sql
  
  LIST 1 LAST
  
  RUN

  If the c:\test_working.sql is not created and the content of the script is not executed.
  
  What I am actually trying to do here (and maybe you guys have a better idea) is to capture the output of the sql command that appears on the client, send it to the server, treat it somehow and then do everything with her (she log in my case).
  
  For example (a very simple example from my scripts).

  spool c:\temporary.tmp
  create table test();
  spool off;
  
  get c:\temporary.tmp
  0 begin insert into logtable (msg) (trim('
  100 ')); end;
  
  save logit.sql
  
  @'logit.sql'

  the idea is to be able to save the output of any control block / anonymous plsql in a way that can be sent to the server for processing (this is for most mistakes, of course).
  I can intercept DBMS_OUTPUT turning SERVEROUTPUT then a DBMS_OUTPUT. ACTIVATE and finally using DBMS_OUTPUT. GET all the lines and the process/log them, but I have not found a way yet to catch the rest of the "TERMOUT' of treatment other than the queue, but even then, I couldn't find a way to get the local file (content) on the server; and this idea GET/SAVE/RUN appeared to be feasible but its does not work (I even tried interactively, but maybe I'm doing something wrong).
  
  Any ideas/suggestions on the topic are welcome.
  
  Thank you.

  Hello

  According to the 3.1.04.72 SQL Developer documentation, the "get" command (among others) is not supported:
  Help | Table of contents | SQL Developer concepts and use. With the help of the SQL worksheet | SQL * more supported and unsupported statement...

  If the options are limited. If sqlplus is available and use it as an "external" tool will not conflict entirely with local policy, these links may interest you:
  Re: sqlplus vs sqldeveloper
  Easy Connect and sqldev.conn issues

  Otherwise, you can add a feature request for this on the SQL Developer and see if such an improvement is a priority for the community.

  Kind regards
  Gary
  SQL development team