SIEBEL_STRING_REFCOUNT variable of environment was not properly set

Similar Questions

• The Adobe Extension Builder 3 works to run a project in Photoshop CC2015.5 without getting "the extension could not be loaded because it was not properly signed.

  Hello world

  The Adobe Extension Builder 3 works to run a project in Photoshop CC2015.5 without getting "the extension could not be loaded because it was not properly signed"?

  OR

  Is there a way to convert my panels that works perfectly in CC2015 up to the CC2015.5version?

  I hope someone can give a solution, because everything that I could find were unanswered questions.

  Thank you all for your generous contribution

  Stone

  You have set the indicator of debugging for 2015.5 CC: HTML Panel advice #21: Photoshop CC 2015.5 survival guide | Photoshop, etc ?

• I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application.

  I was doing a winpeshl.exe.error when starting "the application was not properly initialze (0xc0000006). "Click to complete the application" when I click ok it reboots. I can even recover the system, tried F8 startup, alt/F10, F2, launch repair system, Safe Mode and all the rest and still get the same error. System specs are Acer Aspire 5920, Intel T5450 processor, 2 GB ram, 160 GB of HDD, windows vista edition Home premium.  I am currently under the memory diagnostic tool windows, but it is said that the test results will be displayed again once you log in, but I can't log in to view them.  The test seems to be hanging around 21% so I don't know how well it will do

  Hi A1W1LL,

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure that may help you resolve the issue.

  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer to start as usual

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After reviewing the issue, put the computer into Normal mode.
  Uninstall or update the program that is causing the problem.

  If you are not able to boot to the desktop, you can try to restore your computer from WinRE.

  1. Insert the Windows Vista installation disc in the disc drive, and then start the computer.
  2. Press any key when the message "Press any key to boot from CD or DVD".
  3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
  4. click on repair your computer.
  5. in the System Recovery Options dialog box, select the drive of your Windows installation and click Next
  6. in the System Recovery Options dialog box, click System Restore.
  7. follow the instructions in the wizard to restore system as usual and choose the appropriate restore point.
  8. click Finish to restore the system.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Windows was not properly shut down

  Hello everyone

  This is my first time here on this forum and I have a serious problem with my PC.

  on a random time my PC stops immediately without a blue screen or something.

  I already check my diary and here they say "Windows was not properly shut down.

  I have download a PC cleaning software demo 'System Mechanic Pro', but that didn't help me :(

  Most of the time it's happen, it's when I watch a video on Youtube or another website.

  I hope someone has a solution for me.

  Thanks in advance!

  -Fresh ~ Aurora

  (Sorry for my bad English if you can't read!)

  FA

  There are many things that can generate people.  For example, if you push and hold the power button, the system broke down, or if the battery is dead.  They are not essential and should only be worrying if there are problems that are associated.

• I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.  And when I try to open a dng file, it comes up with "cannot be compl

  I recently upgraded to Photoshop cc (2015) and Windows 10.  Now I get error messages - "the extension of com.adobe.preview.loader could not be loaded because it was not properly signed.

  When I try to open a dng file, it comes up with "could not complete your request because it is not the right type of doc.  Now I have "expansion of libraries could not be loaded because it was not properly signed.

  Any help would be greatly appreciated.  The program worked perfectly in the past.

  I contacted Support Adobe this morning, and they were able to solve the problem.  It was difficult.

• The com.adobe.preview.loader extension could not be loaded because it was not properly signed.

  I get a message "com.adobe.preview.loader couldn't be loaded because it was not properly signed" what should I do?

  Hello

  See this article: https://helpx.adobe.com/photoshop/kb/extension-not-properly-signed.html

  Concerning

  Jitendra

• MESSAGE - LOOK AT AN ENVIRONMENT MAY NOT PROPERLY CONFIGURED TO USE ADOBE READER.  HAVE ACROBAT READER AND USED, MESSAGE RIGHT ON THIS ONE SITE. HOW DO I FIX

  HOW CAN I FIX IT?

  Hi tomp3648858,

  Please refer to this topic If look at an environment is not properly configured to use adobe what should I do?, I would like to know if it's the same scenario.

  Kind regards

  Nicos

• ORA-01079: ORACLE database was not properly created, operation canceled

  Hi all
  On Oracle Database 10g Enterprise Edition Release 10.2.0.1.0
  
  My problem is that I have to delete the database as the same is not created correctly.
  To do this, I get the error when I try to mount the database below.
  
  ORA-01079: ORACLE database was not properly created, operation canceled
  
  Also, when I started the database by specifying the file pfile, he threw out saying error
  ORA-00202: control file: ' D:\ORACLE_10G\DATABASE\CTL1SAMPLEDB. ORA'
  
  When I specified control_files clause in init.ora, that I was getting above error, so I tried to remove the same but still facing the same error.
  
  Can someone help me solve the problem...?
  
  Thank you

  ROCs Rossy says:
  Hi all
  On Oracle Database 10g Enterprise Edition Release 10.2.0.1.0

  My problem is that I have to delete the database as the same is not created correctly.
  To do this, I get the error when I try to mount the database below.

  ORA-01079: ORACLE database was not properly created, operation canceled

  Also, when I started the database by specifying the file pfile, he threw out saying error
  ORA-00202: control file: ' D:\ORACLE_10G\DATABASE\CTL1SAMPLEDB. ORA'

  When I specified control_files clause in init.ora, that I was getting above error, so I tried to remove the same but still facing the same error.

  Can someone help me solve the problem...?

  Thank you

  You should be able to do the following on the command line windows

  oradim -delete -sid sampledb
  

  then remove the D:\ORACLE_10G\DATABASE\ of the file system folder (assuming that there are only records your db in there.
  Finally, delete the D:\ORACLE_10G\ADMIN\SAMPLEDB folder structure assuming it exists.

  Niall Litchfield
  http://www.orawin.info

• Problems crossing timestamp variable block-SQL command not properly ended

  Can you please help me answer or direct me to resources to answer the following.
  
  I'm trying to pass a timestamp of a block variable but me make mistakes with all the methods I've tried yet.
  
  The following example tries to generate a list of all the dates of sales for orders after March 21, 2000.
  
  DECLARE
  BeginDate Orders.PurchaseDate%TYPE: = to_date (March 21, 2000 "," dd-mm-yyyy "");
  Target Orders.PurchaseDate%TYPE;
  
  BEGIN
  DBMS_OUTPUT. Put_line(to_char (BeginDate));
  SELECT PurchaseDate from separate orders to target WHERE PurchaseDate > BeginDate;
  END;
  
  When you run it - it returns

  ORA-00933: command not properly ended SQL ORA-06512: line 8

  please notify

  Hello

  I guess you miss a semicolon as a variable binding for the USING keyword.

  BEGIN
   DBMS_OUTPUT.PUT_LINE(to_char(BeginDate,'DD.MM.YYYY'));
   sql1 = 'SELECT MAX(PurchaseDate) INTO Target from Orders WHERE PurchaseDate> :var_date';
   Execute Immediate sql1 Using BeginDate;
   DBMS_OUTPUT.PUT_LINE(to_char(Target,'DD.MM.YYYY'));
  END;
  

  You can also check out the links below:
  http://download.Oracle.com/docs/CD/B10500_01/AppDev.920/a96624/11_dynam.htm#13131
  http://download.Oracle.com/docs/CD/B19306_01/AppDev.102/b14261/executeimmediate_statement.htm

  HTH,
  Thierry

• Photoshop extension returns: extension could not be loaded because it was not properly signed.

  Hello

  I'm developing an extension for Photoshop CC 2015 and after you have configured everything right, he always returns "extension could not be loaded because it was not signed." When I try to open it. This happens at any other tests extensions development.

  What should I do to not fall on this error? My manifest.xml is as follows:

  1. <? XML version="1.0" encoding="UTF-8"?> 
  2. < ExtensionManifest ExtensionBundleId='com.myscript.extension' ExtensionBundleName='Myscript' ExtensionBundleVersion="1.0" Version="5.0"< ExtensionList > 
  3. < Extension Id='com.myscript.extension' Version='1.0'/ >
  4. </ ExtensionList > 
  5. < ExecutionEnvironment > 
  6. < Parameter Listehotes>< Hôte Name="PHXS" Version="[16.0,16.9]"/> 
  7. < Host Name="PHSP" Version="[16.0,16.9]"/> 
  8. </ Parameter Listehotes > 
  9. LocaleList>
  10. < Regional settings Code="All"/> 
  11. </ LocaleList > 
  12. < RequiredRuntimeList > 
  13. < RequiredRuntime Name="CSXS" Version=/> 
  14. </ RequiredRuntimeList > 
  15. </ ExecutionEnvironment > 
  16. < DispatchInfoList > 
  17. < Extension Id='com.myscript.extension'>
  18. < DispatchInfo >
  19. <Resources> 
  20. < MainPath > ./index.html </ MainPath > 
  21. < ScriptPath > ./source.jsx </ ScriptPath > 
  22. </ Resources > 
  23. < UI
  ! important; background-color: inherit; "> > 
  24. < Type > Group of experts </ Type > 
  25. < Menu > Extension </ Menu > 
  26. < Geometry > 
  27. < MinSize > 
  28. <Height400< /Height> 
  29. < Width > 400 < / width > 
  30. </ MinSize > 
  31. < Size > 
  32. Height > 400 < / height >
  33. < Width > 400 < / width > 
  34. </ Size > 
  35. </ Geometry > 
  36. < Icons > < Icon Type='Normal'>./icons/dark.png< />
  37. < Icon Type="Roll">./icons/dark.png< /icon>
  38. < Icon Type'DarkNormal'>./icons/light.png< /icon>
  39. < Icon Type"DarkRollOver">./icons/light.png< /icon>
  40. </ Icons > 
  41. </ UI > 
  42. DispatchInfo >
  43. </ Extension > 
  44. </ DispatchInfoList > 
  45. < / ExtensionManifest >

      Thanks in advance

      UPS, I forgot to reset the cache of plist in the Mac. There is a pretty easy fix to do so on the link below.

      Development of extensions for Photoshop CC2015 (Mac). Debug mode?

  46. How to uninstall service pack 3, which was not properly installed? There is no button to click to repair remove__or in the add and remove software. Is to play other software, I need it out of my computer__thank - you

      My janome digitizer software does not work properly.  JANOME said to uninstall microsoft service pack 3
      I went to control panel, add or remove software.  service pack 3 is here, but I can't remove it because there is no button to click on delete.  Help, how to remove, uninstall this service Pack 3?  Thanks for your help.

      How to remove Windows XP Service Pack 3 from your computer
      http://support.Microsoft.com/kb/950249

      Unfortunately, now it can create more problems removing it because there have been many updates since SP3.

      TaurArian [MVP] 2005-2010 - Update Services

  47. Repeat me udate was not properly configured for Windows Vista update (platform) _

      It is after it is downloading and restarting the computer.

      Hello

      I guess that part of the question could be a driver which is really old or similar should not be loaded.

      This exit Windows updates on (after you have access) and stop the updates of the driver to load.

      How to disable automatic driver Installation in Windows Vista - drivers
      http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
      http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

      ---------------------------------------------------

      You can use the solutions in this KB - 3 methods and I listed a little help for them below

      The update is not installed successfully, you receive a message, and the computer restarts when you try to
      install an update in Windows Vista
      http://support.Microsoft.com/kb/949358

      Method 1: Start Windows Vista with the Windows installation media and use the repair feature

      How to do a startup repair in Vista
      http://www.Vistax64.com/tutorials/91467-startup-repair.html

      You can also do a safe mode startup repair to access the Recovery Options If you have them available
      or use the DVD as described above.

      This tells you how to access the System Recovery Options
      http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

      Try recovery options Startup Repair

      How to do a startup repair
      http://www.Vistax64.com/tutorials/91467-startup-repair.html

      Method 2: Start the system in safe mode and then use the system restore feature

      How to make a Vista system restore
      http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

      You can also do a restore of the system of starting with a Vista disk.

      Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

      See article below for that.

      You can use this method on the updates that have this problem.
      http://support.Microsoft.com/kb/949358

      Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
      and install it.

      Microsoft Download Center
      http://www.Microsoft.com/downloads/en/default.aspx

      ------------------------------------------------------

      Once you are in Windows I was running once again reset here as a precaution.

      How to reset the Windows Update components?
      http://support.Microsoft.com/kb/971058

      Hope this helps sort it out for you.
      Rob - bicycle - Mark Twain said it is good.

  48. Bought my laptop in 3/08. Windows was not properly updated since 11/08. What can I do?

      I have a Toshiba laptop with Windows Vista Home Premium.  Just Ralized all updates have failed since November ' 08.

      Geek Squad told me I may have a virus, but analyses show that I have not. Do not know how to proceed. Thought about upgrading to Windows 7, but do not know if this could help or just have more problems.

      Maybe this will help now, we have reduced to a specific generic error-

      8000FFFF error code when you click on "Check for Updates" in the item of control panel Windows Update on a Windows Vista-based computer
      http://support.Microsoft.com/kb/946414

      http://taurarian.MVPs.org/WU_Vista/8000ffff.htm

  49. Which is the following: "the recent extension of the files could not be loaded because it was not properly signed"?

      It's something new. I always get a "recent files" option under file. At the start of the program, I now get this box on the screen, which means? I just trashed the prefs before that happened. What should I do?

      Adobe adds two new workspaces and and a 2015 extension of CC.  Recent files is a work space and also an extension.  You cannot use the workspace of the recent files but I have do not think that you can uninstall the extension of recent files.  It sounds as if you have an installation problem.  I do not used two new workspaces Workspace start abd recent files.

      

      

  50. The extension could not be loaded because it was not properly signed. Adobe Photoshop CC 2014.2.2

      I recently installed Adobe Photoshop CC 2014.2.2 and I got this error message as I opened on my 32-bit laptop to windows 7. Here's the problem I screenshot it. Can anyone offer advice please?

      

      I had this problem too.  I didn't know it at first because the CC 2014.2.2 to update installed without error and 2014 CC work without problem so I thought.  I turn off the Welcome screen. I thought it may be a good idea to see if Adobe added something new to the Welcome screen, so I used the Help menu > welcome...  When I did, I got that pop up on the extension is not signed.  After that, I received this message every time I started CC 2014.   Then I saw did not have the new preference do not show the Welcome screen.  I solved the problem by using Photoshop CC 2014 direct Installer to install Photoshop CC 2014 on top of Photoshop CC 2014.  Back level CC 2014 so I used the menu help > updates of all the updates that are installed without error. The home screen has worked and I also had the new shows don't not the preference of the Welcome screen.