Problems during the upgrade of DirectX

Similar Questions

• Problems during the upgrade to TC7.3.6

  Hello

  A few questions, that I discovered when TC7.3.6

  When upgrading my SX80 Cisco to the latest version of audio software cross somehow does not work. We have the training room with AMX installed control where we have two option either just in presentation mode (without using the VC) or mode video conference.

  The audio from the Chooser of Kramer turns to the codec and then out to the BSS: Blu-102, then to the amplifier. After the upgrade when you do a normal presentation and audio does not work in video mode Audio conference seems to work very well using the same way.

  Decommissioning at TC7.3.5 the problem has been resolved.

  I have a second bathroom with a Cisco C40 where we have installed to switch who has one in and 3 out to our projector and 2 LCD screens. When you use the most recent software two LCDs receives a signal from the codec. I also noticed that everything is pixelated and the edges of even the font on the menu are not readable.

  Decommissioning at TC7.3.5 the problem has been resolved.

  I'll do some additional tests to confirm this problem occurs when upgrading to the latest version of the software until I opened a case of TAC. I couldn't do troubleshooting because these rooms are Executive rooms and I had to solve the problem as soon as possible.

  Everyone has experienced a similar problem?

  TC7.3.6 and CE8 have an additional configuration for the Audio element that connects the audio input to a video entry in the web interface, System Configuration > Audio > input > VideoAssociation 1 line.  More than this, there is a MuteOnInactiveVideo that will cut the line when the video source that is associated with the previous command is not present.

  You can try changing the Mute OFF setting or changing the source of videoinputsource to a source which is where your video source that is linked to the audio source is connected.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Problems during the upgrade of Windows 98 Service Release 2 for Windows XP Professional Service Pack 3

  Well, I have an old Dell Dimension that I wanted to use and I decided to upgrade from Win98 to WinXP Pro.

  In the process as soon as I start the upgrade process it gives me an error message"
  " Error 589FF5Ch" I checked around the Web sites and found nothing.

  If no response would be appreciated.

  E-mail * address email is removed from the privacy *.

  Thank you.

  Dear God. I can't believe how much a long time ago, I asked this question. Over 2 years later I see something in my Inbox (right now). Honestly, I know more ask this question.

  And more now, I would say try the upgrade to Windows 2000 if you happen to have a product key. Then go to Windows XP. If not, is it possible to restore Windows 98 updates? Perhaps the latest edition of Service causes a conflict with the upgrade. You be left with a clean cloth. I'm curious, that you still have a machine running Windows 98? What is the material/specs on this platform? I can't believe anyone is still out there running old technology like this to use out of it.

• MY PROBLEMS DURING THE UPGRADE TO WINDOW 10

  I received a notification to upgrade Windows 7 to 10 of the window. In may 2016, I started the process. I followed as a result dialog boxes that Windows 7 and downloaded Update window 10. Beginning of June, my PC me notified to the installation of window 10. When I clicked OK, a dialog box informed me that my PC will reboot several times.

  When he completed the first 100% and continued with another level of installation, to 32% he is static up to 3 hours when I noticed that my laptop batteries becomes excessively hot. I then turned off the batteries. When I powered up the PC again, it began to recover my Windows 7. From there he was showing me that my windows 7 is not genuine.

  Now I couldn't restart the upgrade from window 10.

  The PC is my desktop PC and I can't access the product key of window 7 for use in a revalidation. What should I do to get out of the mess.

  Not wise to interrupt an upgrade

  You even need to create a system image on a removable hard drive?

  Anyway now you will need to contact M$ using the activation of the phone and communicating with the manufacturing of the machine to sort the invalid license.

• Problem during the upgrade of Windows 10 via Windows Update.

  I am currently using a Genuine Windows 7 Home Basic OS.

  When I was upgrading to Windows 10 via my Windows Update, download of the updates with 99% , then he started again to 1%.  What is the problem?

  Although, I downloaded all the important and optional updates before moving on to Windows 10, then also what why? How to fix it?

  Help, please!

  Thanks in advance.

  Hey,.

  If you get 10 Windows via get windows 10 app, you always can ISO to upgrade.

  Download Windows 10 media creation tool

  After you download the Windows 10 installation files using this tool, you can upgrade your existing 10 Windows operating system, or you can create the bootable USB drive or DVD to install Windows 10 key later. You can also save the installation files to the ISO in offline mode file format, if you wish.

  

  (Askvg.com)

• Problem during the upgrade of Captivate 8 to 9 Captivate projects

  I am trying to edit a project using 9 Captivate that I had previously maintained using Captivate 8.  But something seems to happen to the peak action.

  I've been using a conditional action advanced on the first screen, but after that I open the file and save it with Captivate 9, the tip action stops working properly.  When I looked (no editing has been done to it), it had become a Standard (as opposed to a conditional Action Advanced) tip Action.

  In this photo, I have 8 Captivate and Captivate 9 open at the same time (2 Captivate different files), just so that you can see the differences.

  Initially cela (and others) advanced actions have been created using Captivate 7, but I had no problem once I moved to 8 Captivate.

  

  I wonder if when I first opened a Captivate 8 9 Captivate file, should I go through each advanced action and re - update before I save the file .cptx for the first time in 9 Captivate?

  Thank you.

  Randy

  Install the hotfix released a few weeks ago (not really a patch, it should be done manually unlike a patch that can be installed by using the option). In this article, you can find the link and documentation:

  Hot fix | Adobe Captivate questions 9

• Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process.

  Firefox will not start after the upgrade to 27. Seen an error message during the upgrade process, but do not remember.
  Tried running firefox.exe Pei but error message:

  XML parsing error: the undefined entity
  Location: chrome://mozapps/content/profile/profileSelection.xul
  Line 18, column 1:
  "< dialog < =" "^ =" "p =" "> < / dialogue >

  Running on Windows XP SP3. No problem whatsoever before moving to 27. Sending of Chrome that I can't open Firefox at all.

  Thank you, jschaer2000. In the meantime, he works. How long, we'll see ;-)

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• UNMOUNTABLE_BOOT_VOLUME during the upgrade to Windows 7 from Windows Vista

  I'm getting an unmountable_boot_volume during the upgrade to Windows 7 from Windows Vista.  It occurs after Windows 7 software loads and restarts.  If I restart the computer, I have the option to start the upgrade to Windows 7 or Windows Vista.  If I select Windows Vista, the computer restarts without problem.  If I choose Windows 7 Upgrade, I get the blue screen of death with the unmountable_boot_volume error.  Of course, nothing wrong with the boot volume because Windows Vista starts without error.  The boot drive is 1.5 TB.  Any suggestions on how to accomplish the upgrade to Windows 7?

  Windows Update has nothing to do with the upgrade of Windows. Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• Optiarc bd rom bc - 5500 s work stopped during the upgrade to Windows 7, Windows Vista 64-bit impossible to load the driver.

  Hello

  I use sony vaio VGN-FW290 JTH. I tried to upgrade to Windows 7 and has been invited to uninstall iTunes, Vaio Care, ATI Catalyst Install Manager, ATI Catalyst Control Center, Google Toolbar. I uninstalled it, rebooted the PC and then tried to run Windows 7 installation DVD. Then, I realized that my CD/DVD/BD does not, marked with! in the Device Manager. I tried the procedure in this forum to the http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/957a26d4-4219-4b76-8e89-2e74e6ee2a0e/. I ran SFC tool - it pointed out some problems he couldn't fix it. I tried to update to the latest drivers for the drive, but Windows says that the latest drivers are installed. The properties for the device say: Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39):

  I hope someone from Microsoft or Sony can help - I think that it is catch 22 during the upgrade to Windows 7.
  Concerning
  Tomgold

  Hi tomgold,

   

  Welcome to Microsoft Answers Forums.

  This can also occur if an incorrect device driver has been installed for the DVD-ROM device.

  I suggest that you visit the DVD drive manufacturer site download the latest drivers for the drive and install on the computer and if it works. Make sure you download the Windows vista 64-bit driver.

  Device Manager error codes

  http://support.Microsoft.com/servicedesks/webcasts/wc091802/devicemgrerrcodes.htm?gssnb=1

  If the above, step fails I would suggest that you run the patch available in the link below and check if it works.

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista.

  7 Windows vista upgrade problem

  During the upgrade of vista 64 bit, 7 64 bit process hangs about 2/3 of the way through the last part and I have to reboot that restores Vista. No idea what could be the cause of the crash?

  Hello

  I suggest you perform the steps in troubleshooting from the following link and check how it works.

  Upgrade stops responding (hangs) at 62% when you upgrade to Windows 7

  Check out the following link for more information about how to upgrade Windows Vista to Windows 7

  Upgrade Windows Vista to Windows 7

• It will be possible to choose the 32-bit or 64-bit during the upgrade to Windows 10 no matter what version you currently have?

  Original title: Windows 10 upgrade options

  It will be possible to choose the 32-bit or 64-bit during the upgrade to Windows 10 no matter what version you currently have? I know there are problems with the upgrade a 32-bit version on 64-bit directly, but it is possible to install 64-bit and have a backup installation files in the Windows.old folder.

  If you are currently running a 32-bit version of Windows 7 and you want to migrate to 64-bit Windows 10, you will need to download the 64-bit Windows 10. ISO and make a custom installation:

  How to: perform a customized Windows installation

  A custom installation will produce a Windows.old folder, but as that mentioned, it is none functional. The best thing you can do is to create an image of the system in advance if you need to go back to Windows 7:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  See also:

  What are the official update paths to Windows 10?

  Microsoft has revealed in a video of 9 Channel official upgrade paths to Windows 10:

  

  Users of Windows XP and Windows Vista will have to do a clean installation of a. ISO, so Windows 8.0 users.

  Source: http://channel9.msdn.com/Events/WinHEC/2015/OWD100

  If you try to upgrade to Windows 7 by using Windows Update, it will keep the same architecture.

  How knowledge publishing Architecture, canal and the construction of 10 Windows installed.

• Authorization request during the upgrade of the application.

  Hello

  I have the problem with the permission of the application.

  When I install the application, I get the message of trust application, but when I upgrade the application, I don't get the message of trust application but get the message "this application of [application name] has asked an http connection [link URL]" with checkboxes.

  These permission prompts appear 7 times in my application for different URLS.

  Why the permission is changed during the upgrade and how to avoid these prompts for permission?

  What you see is what I see too.  Updates seem to "revoke" the application permissions.

  To work around this problem, I recommend to start the application, that it has the required permissions.  The permissionsApiDemo is a good example of how to do this.  If the application has lost permissions, then you must prompt the user for you give the appropriate permissions - new PermissionsApiDemo is a good example,

  Don't forget that you can actually loose permissions in other ways, for example the user permissions of your application in editing parameters.  If it pays check every time.