Problems importing files HAVE in flash

Similar Questions

• Importing files have effectively in Flash CS5

  Hello

  I import a file in flash that I'll have to use several times in my calendar. What is the optimal way to make changes to a chart of the AI which appears in several places, without seeing your change from first on each of them?

  Any help would be greatly appreciated.

  Thank you!

  If the graphics imported of HAVE show in the library of the Flash animation, duplicate the graphics you need to change. Then you can edit the copy and the original will remain as it was.

  If the AI of the imported graphics are imported directly to the step, select one and then do a movieClip. Select the new movieClip in the library and then reproduce them. You can now edit or change the duplicate without affecting the original imported graphic.

• Problem importing files Outlook Express to Windows Live Mail in Windows 7__

  My new computer has Windows 7 and, of course, Windows Live Mail.  My old computer has Windows XP and Outlook Express.  I copied my file OE that contains all my USB key *.dbx files.  On the file menu of WLM, I then selected "Import Messages" and then indicated the location of my OE files on the USB key.  When I clicked to import the files, a small window with a green status bar that showed all the imported files.  I then clicked on "Finish."  My problem is even if the import seems to be successful I don't think the imported files or folders in Live Mail.  I tried twice with the same results.  Did I miss a step?  My just OE files seem to have not gotten in my Windows Live Mail program.

  Look in the imported folders under storage folders. If you do not see the storage files, in the Menu bar: view | Page layout | The folders pane. Check: View the storage folders.

  Missing Menu bar? Click the menu button to the left of the help button and activate the menu bar.

  If still no joy, copy the database messages OE of the USB on the desktop and try to import from there.

  Transfer of data from Outlook Express and Windows Live Mail:

  For messages:

  Copy the * ENTIRE * OE message store folder to a flash drive. (Folders.dbx must be included). Place it on the desktop or another location on the computer using WLMail. Open WLMail and: file | Import | Messages | Microsoft Outlook Express 6, and the point where it was saved.

  Location of OE message store:

  In OE: Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  For addresses:

  Open the address book in OE and file | Export | Address book (wab) and save it to the desktop. Copy it to a flash drive. Place it on the desktop or another location on the computer using WLMail.

  Open the Contacts list in WLMail, (go |) Contacts in the Menu bar) and the file | Import | Address book (wab) Windows and the point where you saved it.

  Note: If you use a CD or a DVD instead of a flash drive, after placing on the new machine you must remove the read-only attribute in the properties before you import.

  Bruce Hagen MS - MVP [Mail]

• Unable to import file HAVE for consequences

  HELO,

  I have problem with importing a file HAVE (images or compostion) in after effect.

  When I try to import it take forever to load (most of the time it loads at all), and all I see is black... and the bar blue loading under the composition Viewer.

  After the chat with the support they told my that This is a problem specific file...

  Someone recognizes the problem?

  I installed CC last week and it's really annoying, I can't work since...

  
  

  Thank you all...
  

  Thank you for your response.

  After a lot of research and testing, I discovered that the problem was with specific files which include some include photos and make files HAVE too heavy to open.

  I remove these photo and After Effects working properly!

  Thank you for your good will.

• Problems importing files .wmv in After Effects.

  Hello. I know that there is a question like this, but I can't use any other file format, because:

  Every time I have import or try to play or rub the file (.wmv) in the timeline, it displays an error:

  After effects error: frame of reading of the "D:\" file... error (4) WMV ".

  (86: 2)

  How can I solve this problem? I have the AVCHD camera and I (HD Full HD) video editing in Corel Video Studio. BUT! The file format that BEST is .wmv when I export my films. I did an action movie and I want to add effects in AE, but it shows this error. I CAN'T JUST USE ANOTHER FILE FORMAT. Y at - it anyway how to solve?

  In any case: AE CS5 will support WMV WITHOUT ERRORS?

  Thank you very much.

  I'm going to echo previous posters convert your video to WMV to work at AE is one of the worst things you could do. So from a point of view of quality and a workflow perspective. Yes, the uncompressed files are large. you have to find a way to work with that.

  Why the WMV is bad? I'll call you my friend Dave LaRonde After Effects of CreativeCOW .net Forums:

  Response to Dave #1 Stock

  If the images you imported in AE are all sort of what follows - images in a codec to acquire HDV, MPEG1, MPEG2, mp4, m2t, H.261 or H.264 - you must convert it to a different codec.

  These kinds of sequences use the time compression or inter-trame. They have keyframes at regular intervals, with information of the full frame. However, middle managers have all the information. Codecs inter-trame launch duplicate information.

  In order to maintain maximum efficiency made, AE needs complete information for each image. But because these sorts of images contain only partial information, AE freaks out, resulting in a wide variety of problems.

  WMV falls into the same category using interframe compression. Even if you have used files directly from your device, you would have still some problems because your camera uses MPEG-4 h.264 compression.

  Try to export Corel a QuickTime using the PNG codec (I've never used the program, so I don't know if they give this option, but it is still visually lossless and a little less large files).

• Problems importing files in Dreamweaver

  I previously imported files in Dreamweaver by dragging my desktop and dropping them in the local files from my Web sites.  All of a sudden today, I can not all the files to import into Dreamweaver.  I use Dreamweaver on a Mac with OS 10.9.2 13.2.

  Can drag you files in your folder of local site using the file manager of your operating system (Finder)?

  Nancy O.

• problem importing file in moviemaker .vob

  Hi, I hope someone can help me with the following problem: I record DVDs and try to import them into WMM. Usually, it is divided into 5 files .vob, VTS_01_1 to VTS_01_5. In the import of WMM, it recognizes VTM 01_2 5 and I can make a film with those without problems, but it does not allow in the beginning of the dvd import, IE VTS_01_1, import, saying: the file cannot be imported because the codec required to play the file is not installed on the computer. If the problem is only with the file VTS_01_1.vob
  I tried to convert the file in: .avi, .mpeg, .wmv,. MP4, however it will not matter. I also tried to download several codec packs, but this will not work either.
  If someone would have a good suggestion how to solve this problem, I would really appreciate it.

  Hi, I hope someone can help me with the following problem: I record DVDs and try to import them into WMM. Usually, it is divided into 5 files .vob, VTS_01_1 to VTS_01_5. In the import of WMM, it recognizes VTM 01_2 5 and I can make a film with those without problems, but it does not allow in the beginning of the dvd import, IE VTS_01_1, import, saying: the file cannot be imported because the codec required to play the file is not installed on the computer. If the problem is only with the file VTS_01_1.vob
  I tried to convert the file in: .avi, .mpeg, .wmv,. MP4, however it will not matter. I also tried to download several codec packs, but this will not work either.
  If someone would have a good suggestion how to solve this problem, I would really appreciate it.

  ======================================
  Two things to try.

  (1) make a copy of the file VTS_01_1.VOB of experimentation...
  Right click / Rename the file VTS_01_1.VOB at VTS_01_1.MPG
  try to import the .mpg file in Movie maker

  (2) in the case of failure, use the following freeware to convert the
  File VTS_01_1.mpg to VTS_01_1.WMV

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  all the boxes on the last screen)

  After downloading and installing Format Factory...
  Open the program and choose an output folder...
  (this is where you will find your files when they are
  converted)

  Drag and drop your video files on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Try to import the. File WMV in Movie Maker. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problem importing files to LR5.

  Hello

  I have just purchased a Canon 1 d Mk IV and can't import the CR2 files in LightRoom5. I tried two CF and SD cards, tried different readers but LR all the shows in the area of import is «not found pictures»

  I tried all the usual things, restart the MacBook, the formatting of the card in the camera, but nothing seems to work.

  I have no problem with my 7 d or 1Ds - any suggestions would be appreciated.

  DJ,

  I managed to resolve the issue, I found one of your messages of 2012 related to 'unable to read' meaning 'written to destination. Don't know how, but the import destination has been moved.

  Thank you, gentlemen.

• Problem importing files animated .oam Edge

  Hello

  I'm working on a project where we import animations on board. The problem I have is that sometimes, the .oam file does not play and I can't determine which is the cause. This does not happen with all the files and I found if I understand audio on board, this causes the .oam file does not play in Captivate. However, I removed the audio, but he did not play again. The other thing I've done is to make sure that there is no warning of incompatibility browser on board, because I know that can cause problems also.

  An overview of this problem is greatly appreciated!

  I think that the problem is just in the way that I tried to get a glimpse of the animation. It does not appear if I go to overview > of this slide, however, it works when I preview > HTML 5 in the browser. I wish there was an easier way to preview in Captivate. Only, the "Hover to preview' seems to work when the animation is first imported.

• Problem importing files raw mxf (Sony F5)

  Hey everybody,

  I use first Pro CC on Windows 8.1 v7.2.2 and wanted to import some images shot with the Sony F5. I have read that since v7.2 it is implemented for these types of files, but when I tried to import them there was "generic error".

  So I downloaded the Sony RAW plugin for Adobe (PLAD-RW1) and tried again. But once again: failure to import a file.

  Now it's interesting: the files are on my internal drive with 3TO (only for data). Just for the heck of it, I copied some files to my SSD on which Windows is installed. It is all of a sudden no problem to import the files into the first and better yet, the link Direct to SpeedGrade also this SSD works fine.

  But this cannot be the solution because there is not enough space for all my files on the SSD and it is usually a weird behavior.

  Does anyone have an answer why this is happening? I have absolutely no idea and really appreciate your help!

  Kind regards

  Fabian

  HA, I solved it. It's the discs...

  My hard drives must be too slow. I installed another SSD and with it, everything works fine. Looks like I have to be upgraded a bit...: Pei

• Problem importing file (CS6 Codec missing or inaccessible QT of MPEG-4 on PC)

  I read through several of the other threads associated with this problem and still do not have yet to fully understand what it is I do.

  As mentioned in the 'question', I work in Adobe Premiere CS6 (pc) and try to import an MPEG-4 QT. The file has been edited and exported Final Cut on a Mac some time ago.

  I downloaded MediaInfo to determine the codec, and, as I understand it the program...

  Codec ID: Quick time (qt)

  Video codec: hdv2

  Audio codec: sowt

  Given this information, how can I get the correct codec for adobe first or convert my file? Or is there another solution that I don't know how to proceed?

  http://forums.Adobe.com/message/3028713?TSTART=0

• Problem importing files named dd.mm.yyyy_hour_minute to timelapse

  I have thousands (196000) photos of November 21. on 31 December 2014. 2015 1 photo every 5 minutes. They were named as 21.11.2014_00_05.jpeg... 31.12.2015_23_55.JPEG. Easy for us humans to understand the sequence but not so easy for computers. I know that they were named as 20141121_00_05.jpeg... 20151231_23_55.JPEG but that's how it is now.

  And the question is: is it possible to tell the first to import pictures in the right order with this nomination? As he told day is here, is here and who is year etc.. Or y at - it another way? Yes, manually. : O).

  For a sequence of images (assuming that's what you want and not only to import still images) must name the JPEG files, which is as simple as possible:

  000001.jpg to 196000.jpg

• black screen appears during import file have?

  black screen during file import have

  Disable the GPU acceleration in preferences.

  Mylenium

• Why all my imported files have blacked out?

  I imported only some files taken on Sony A7rII to my test of LR on my iMac running El Capitan. For a few seconds, all the thumbnails appeared and turned to black. What have I done?

  Hi Ken,

  Please follow the steps if you see black pictures after importation into Lightroom below:

  1. Turn off apply tone auto under Lightroom preferences settings
  2. Restart Lightroom and then import images again.

  Kind regards

  Tanuj

• Problem importing file Palm 6.2.2

  My computer crashed, but my hard disk files are intact. I downloaded palm 6.2.2 to my new computer. My problem is the files on my hard drive the .bak and .dat files and the new software is looking for .dba or .vcs files. Can I import the old files to the new version, 6.2.2.

  In a simple answer to your question, no you can't. You will need to uninstall 6.2.2 and go on the Palm site and install the version 4.1.4. Export data, and then import the data into the version 4.1.4

  Message relates to: Centro (Sprint)