Problems installing vista 64-bit system updates

Similar Questions

• I did everything I was told to do about Windows Vista 32-bit system, update KB970430. I get this message after attempting to instaull 800b0100.

  KB970430/800 B 0100

  I always have problems with update meanings. Pls help

  Hi Nevaliverpool,

  All the troubleshooting steps you have tried to solve the problem?

  I suggest you to follow the steps from the link and check if it helps.

  Windows Update error 800b0100

• Impossible to install Vista 32 bit or Windows 7 on my Satellite L300D

  Hello world

  I recently decided to reboot my laptop, because whenever I open it, it will say do to run a recovery system and doesn't go anywhere.
  I left it on for hours and nothing came, so I tried to install Vista 32 bit, but does not. I need Windows Vista 64 bit or is this something else?

  In general your ad is a little complicated to understand. We understand that you have problems with the installation of the OS, but I put t understand exactly what happens then please be so kind and try to explain what happening exactly when you try to use the original Toshiba recovery image.

  Does installation starts correctly?
  On what stage is stays and doesn't go further?
  What happen when you try to use the Win7 installation disc?

  Please provide as much information as possible.

• Can satellite M300 - I install Vista 64-bit?

  I have a Satellite phone, M300. Memory 4GB Centrino2 P8400 processor.
  Can I install Vista 64 bit on my laptop?

  Why not?

  Laptop computer s hardware components are strong enough to ensure good performance, even using the Vista operating system.

  The M300 Satellite seems to be an Australian series for Toshiba laptop.
  On the page of the Australian driver Toshiba, I could find drivers for 64 bit Vista for a Satellite M300
  http://www.ISD.Toshiba.com.au

  I think that it shouldn't be a problem to get the Vista 64 bit running on this laptop ;)

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• Need a Firefox 32 bit for my Vista 64 bit system

  Some web sites will not work with the browser Firefox 64 bit - I want to install a 32-bit version on my Vista 64 bit system.

  Automatic download of Firefox gives me no options, nor there at - it obvious links on the Mozilla site.

  Where can I get the 32-bit version?

  Thank you.

  There is no 64-bit version for firefox, only 32 see:

  Firefox 10 system requirements

  64-bit version is not every night, but this is only for testing purposes and is not being released, as the last 10.0.

  Firefox nightly

  Thanks again

• You have an another "Black Screen of Death" problem on Vista 64-bit.

  You have an another "Black Screen of Death" problem on Vista 64-bit.  I downloaded and burned the CD to repair, and it loads fine.  However, whenever I go into the options, it is not read my C: drive.  It will not restore the system, it cannot run a "Startup Repair" and if I go in the "Command Prompt" and type "C:", it says that the device is not ready, so I can't change the registry to attempt to repair.  Am I missing something that I need to do first in "Setup"?  Note that without the disc, I go straight to the black screen with cursor.  I can't go in Mode safe, I can't perform sticky keys, and I can't do anything else.

  Any help here?

  Hi AaronTom,

  1. you remember to make changes to the computer, after which the issue started?

  I suggest that you contact the manufacturer of the system for a Windows Vista DVD, and then try to perform a startup repair using it:

  Startup Repair: frequently asked questions

  What are the system recovery options in Windows Vista?
  
  

• New HARD drive installed Vista 32 bit, but need drivers for Satellite Pro A300-1MC

  "Because my recovery disks that I made 3 years ago does not, I just installed Vista 32 bit and then on the Toshiba site, where I have downloaded all the drivers available for my laptop (a Satellite Pro A300-1MC) on a USB key (that I don't have a driver to connect to broadband on my laptop) and when I tried to open on my laptop a message comes up saying" Please insert the last disk of all selfextracting and click OK to continue. "

  So what I do now?
  Thank you

  Sounds like you have enabled autoplay
  Whenever you insert the memory key USB flash it will try and read the contents of the files on it.
  You can disable this by holding SHIFT when you insert the USB key.
  This should disable the AutoPlay option.
  Then you can go to MY computer in order to access the USB key.

  Note: pilots are zipped so you will need to decompress the content first, I installed a 3rd third party tool called WinRAR to unpack the packages unique.

• Can I install Vista 64 bit on 32-bit Vista?

  I can install Vista 64 bit on a Vista 32-bit mode window mode or should I make an OS install clean / modified?

  You must do a clean install, which means that you must start again Vista 64-bit DVD and follow the instructions on the screen.

  I think the upgrade from 32 bit to 64 bit is not possible.

  Check this Microsoft page:
  + Can I move from a 32-bit version of Windows to a 64-bit version of Windows? +
  http://windowshelp.Microsoft.com/Windows/en-us/help/41531554-d5ef-4f2c-8fb9-149bdc5c8a701033.mspx#EFF

  Good bye

• Is it possible to install Vista 64-bit on Satellite Pro P300-1CS?

  Is it possible to install vista 64-bit on the Satellite Pro P300-1CS?
  Best regards
  DUP

  Hello!

  It should be possible to install Vista 64-bit on the laptop but I could be that you will get not all drivers.
  For now, doesn t support and 64-bit drivers Toshiba offers but you can search on other sites:

  Here are some examples:
  -Intel chipset: [www.intel.com]
  -Realtek sound chip: [www.realtek.com]
  -WLAN driver: http://195.182.196.33/wlan/
  -Bluetooth: http://195.182.196.33/bluetooth/

  Good luck!

  Good bye

• ODBC for Vista 64 bit system drivers

  Hello

  I am currently working on a Vista 64-bit system and I don't seem to have all the drivers , that I had when I was running with a 32-bit Vista system. All that I have to choose a ' SQL Server ' is in my "Create new Data Source" dialog box. I need to be able to establish a connection to an Microsoft Access database and select Microsoft Access (*.mdb) in the "Create new Data Source" dialog box. On this new 64 bit Vista system, I don't have this option. Why is this? How can I get them? What are my options?

  Thank you
  Matt

  Matt, see the following articles for steps on adding drivers to ODBC:
  ODBC: Frequently asked questions
  Using the ODBC Data Source Administrator
  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to overcome the 7 error during the installation of the first 13 items? "Unable to install the 64-bit system.

  I bought and downloaded Adobe first 13 items and when I try to install the program I get the error code 7, that it can not install on 64 - bit systems. However, the requirements for the program says it is supported on windows 8; 64 bit.

  I just reinstalled mine today of a download from amazon. Once it was downloaded and made a record, there were two options, one was for the 32-bit and the other 64-bit. It would no doubt be trying to install a 32-bit in order to give you this error. The link given to the Peru has an option to download each version.

• Update KB971644 fails repeatedly to install on Vista 32 bit system

  Every day, I notified of an update recommended to my system, (update KB971644 in particular) and every day it fails to install. Sometimes I get an error message which is recommended to visit the homepage of Install Shield, but I get no response here. (the error code is no.-3). The update is only about 6 MB, and I know I have enough hard drive space. I tried to clear my cache, cutting off the firewall and even leave the virus protection software. Don't know what else to try to install this update! All other updates installed, and I have all the Vista service packs installed and running courses. Thank you.

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  You receive an error message when you install the update?

  Try to disable all non-Microsoft programs and try to install the update.

  Update KB971644 is the platform update for Windows Vista, it contains the following updated technologies:

  Windows Graphics, Imaging, and XPS library
  Windows Automation API
  Windows portable devices platform
  Ribbon Windows and Animation Manager library

  Updated Windows program malfunctions if none of the non-Microsoft programs interrupts the installation updates.

  If you want to install this update and then, try the steps below.

  Reset windows update components.

  To reset the windows update components visit the below link and click repair button / follow the steps to fix it yourself.

  http://support.Microsoft.com/kb/971058

  Now try to install KB971644 update from windows update.

  For more information visit http://support.microsoft.com/kb/971644

  You can check the link below.

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• Impossible to install Vista SP2, says needs update of system tool

  I use Windows Vista Home Premium 32 - bit edition with Service Pack 1.  His ability to perform automatic and manual, updates have not completely.  When I try to update, it tells me that I need what is called a system update tool.  The Download Center Windows says I need Service Pack 2 to use this tool.  But when I tried to install Service Pack 2, it failed, saying he needs the system update tool.

  Then... I need Service Pack 2 to install the system update readiness tool, and I need the analysis of system update tool to install Service Pack 2?  Huh?

  The only other option I can find for this is to fix the "CBS Manifest" which is apparently corrupt.  To do this, I need to "repair Windows" using "Windows DVD.  But this computer comes with pre-installed Windows and did not come with a 'Windows DVD.

  Is there a solution to this problem?  Any advice would be helpful and appreciated.  I ran virus and malware scanners, are looking for things that can interfere with the update process, defragmented my hard drive and cleaned the registry.  What other options are available?

  * original title - updated: absurd circular problem. Please help.*

  I use Windows Vista Home Premium 32 - bit edition with Service Pack 1.  His ability to perform automatic and manual, updates have not completely.  When I try to update, it tells me that I need what is called a system update tool.  The Download Center Windows says I need Service Pack 2 to use this tool.  But when I tried to install Service Pack 2, it failed, saying he needs the system update tool.

  Then... I need Service Pack 2 to install the system update readiness tool, and I need the analysis of system update tool to install Service Pack 2?  Huh?

  The only other option I can find for this is to fix the "CBS Manifest" which is apparently corrupt.  To do this, I need to "repair Windows" using "Windows DVD.  But this computer comes with pre-installed Windows and did not come with a 'Windows DVD.

  Is there a solution to this problem?  Any advice would be helpful and appreciated.  I ran virus and malware scanners, are looking for things that can interfere with the update process, defragmented my hard drive and cleaned the registry.  What other options are available?

  Hey RahXephon

  see if you can borrow a vista microsoft dvd to do a repair installation

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  You may have more luck with this if repost you in the correct windows update forum

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  Walter, the time zone traveller

• problem installing vista Home premium service pack 2

  I recently had a hardware crash, had to reinstall the operating system, i.e. Windows vista Home premium with service pack 1 (32-bit) who came wth the system. Later, I tried to update the operating system, but the thrown error was 'WindowsUpdate_80080005 '. I tried to download vista sp2 on microsoft site, and when I tried to install it, it threw an error mentioning as casastrophic error E_unexpected(0*8000ffff). How can I update my windows vista Home premium with Service Pack 2?

  I tried the options listed below
  • tried to update via windows update, it threw an error "WindowsUpdate_80080005."
  • tried to install it by downloading the sp2, it threw an error E_unexpected(0*8000ffff)

  Please answer

  BR
  David

  Hi, DavidDarse,

  0 x 80080005 indicates that there is a problem of access denied with the Background Intelligent Transfer Service (BITS) security descriptors.

  1. don't you make changes on the computer before the show?
  2. When you receive this error message?
  3 update you trying to do?

  Method 1: Run that fix the following:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  If the problem persists, then try to set up your computer in a clean boot state and then try to install the update to windows.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Download the file and save it to your desktop

  Close all windows and applications

  Right-click on the file and select run as administrator to run the installation process.

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  WARNING: Microsoft does not recommend interrupting the CHKDSK process. Microsoft does not guarantee the integrity of the disk if the CHKDSK program is interrupted. For security, you can back up your data before using check disk drive.

  Have you tried a system restore before the second error?

  http://support.Microsoft.com/kb/2732500

  FixIt MS: 0x80000FFFF error Code when you download updates on a computer running Windows Vista by using Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/946414