problems of class ASA5510 dsl and business
Here's my setup.
Business class dsl modem with a static IP (100.0.0.1) connects to an asa5510.
the ISP gave me another static routable ip address for the asa5510 and I configured the 5510 outside interface with this (100.0.0.2).
I have also some machines behind the inside interface of the 5510. (172.16.1.0)
All I want to do is let some ppl vpn inside network to make a diagnosis.
I don't need someone inside to access the net, so no nat is necessary.
I crossed the normal config vpn and remote vpn Wizard.
However, by using the cisco vpn client, I am unable to connect.
I ping the 100.0.0.1 interface, but is unable to vpn in.
I think that there is no path of 100.0.0.1 100.0.0.2
any suggestions?
The group name must be EAT that is configured on the tunnel-group settings in your ASA. Do not "vgoradia", but what is configured on the SAA.
And the password must be one that you have configured in the tunnel-group for pre-shared key parameter.
tunnel-group EAT type ipsec-ra
tunnel-group EAT general attributes
address vpnpool pool
Group Policy - by default-EAT
tunnel-group EAT ipsec-attributes
pre-shared-key *.
Let me know how this pans.
The rate of this post, if that helps.
Thank you
Gilbert
Tags: Cisco Security
Similar Questions
-
Problem with Quicken 2012 House and the company after installation, runtime error
I have a problem with my Quicken home and business 2012. I upgraded from 2009 to 2012 and was able to use the new version for about 1 hour, but he hung a little. Now when I tent to access my Quicken program, I get a runtime error "program: C:\Program Files\Quicken\qw.exe ' abnormal program termination. Quicken is then stopped immediately. I am currently running Windows XP service pack 3. Any suggestions?
Hi RENEE HETTERLY,.
I suggest that you uninstall and reinstall Quicken program on the computer, check to see if it helps.
How to change or remove a program in Windows XP
http://support.Microsoft.com/kb/307895
If the previous step fails, then you will need to contact Quicken support for assistance.
-
Problem software Checksoft home and business
just purchased Checksoft Home and Business and the message I get is: MDAC 2.8 RTM is not compatible with this version of Windows. All of its features are currently part of Windows. I have no idea of what I need to do
You start by contacting the Checksoft support. This has absolutely nothing to do with Windows Update.
-
Chrome seems to sneak when we don't look for an upgrade. I can not even find it uninstall except that I have reset my browser than IE. I have Win 7, Outlook 2010 Home and Business. I can't open a hyperlink in email. The answer is,"the operation was canendeled due to restrictions in effect on your computer. Please contact system administration. "I'm the system administrator. I used what I found on the web to reset the Regedit and nothing helped. I need help in what setting should read. I don't know that I had to change the HKEY CLASSES ROOT to data to read html. I did, restarted and nada. What else do I please you? I was after this problem all day and don't want to mess up this PC. A person must have been messed up with Google Chrome and should have a fix for this.
Secondly, how can I get all this Chrome on my computer? It is not yet listed in so I can remove it entirely.
Thank you very much.
The other post:
I need some things simpler than d, v, f I have no idea what they mean. Google Chrome is sneaky get in otherwise careful upgrading things that now have this option selected. I can not even find Chrome to uninstall. My tookbar is all Google. I set my default back to IE but once, something snuck in two days ago and now my hyperlinks in emails do not open. The message is, 'the oeration has been cancelled due to restrictions in effect on this computer. Please contact your system administrator. "That would be me, and I am amazed by it all. To make things worse, I need to change my email address on this site and does not know where.
I really need help now, with this problem of e-mail. All come in Outlook 2010, office or home and business. and I Win 7. Will be your corrections, Ivan work for me? I just can't understand all initials and will keep this site open overnight and try again. I went to this for hours with several suggestions. I have really messed up my registry. Thank you.
Hello
If the problem persists, I suggest you to post your query in Microsoft Office and Outlook Forums for better support.
http://answers.Microsoft.com/en-us/Office/ForumTo uninstall Google Chrome see the help link and check if it helps.
http://productforums.Google.com/Forum/#! wIlTTphMOHI/chrome/subjectIf the problem persists there is nothing much we can do from our end. You may have to contact the Support Google for the same thing.
http://www.Google.com/support/chrome/?hl=enIt will be useful. -
Why can't I install Turbotax 2010 Home and Business in XP?
Several months ago, I installed Turbotax 2010 Home and Business in XP Pro and set up two returns. A few weeks later, I went back and TurboTax would not. Thinking that the files have been corrupted, I uninstalled TTH & B and tried to re - install from the CD, only to receive error messages. So I tried to use the cleanup tool, which partially worked, but I still get error messages. Other things I've tried only to get the error Stops include:
1 clean the registry both manually and with the cleaning tool
2. clean the files .net (3.5 and below)
3 reinstall XP
4 reinstall MS Installer.
5 copy the disc on my desktop and install - always get error messages.
6. cancellation of registration and record msiexec.exe
7 detection and cleaning with StopZilla Reg Cure and PC Health Advisor (which is SUPPOSED to fix)
8 Mode installation without fail, at the command prompt and in other modes
9. other methodsIf you can help, I would be very happy.
What are the error messages? Word for Word, please.
What "cleaning tool" specifically? What is "partially worked? How could you say this partially worked mystery cleanup tool?
- #1, second part, of least not such a great idea - even if your machine...
- #2, which means "cleaning"? Versions of the .NET Framework are all independent. Just because you have later does not mean that you have all the versions you need.
- #3, that * you * average by reinstalling? Repair? Or real format and install?
- #4, OK... You must have had a reason for this?
- #5, interesting - approach and yet you still don't give error messages?
- #6, OK... You must have had a reason for this also?
- #7, I have no words to #7...
- #8, okay - I can see which ones are something to try...
- #9, the #9 was really necessary to add? * smile *.
What you say about intuit?
http://TurboTax.Intuit.com/support/As it seems your entire number around their product centers, which help you got on their part? Given you didn't mention (and you were detailed enough) get help from them - I suppose you did this road for some reason any?
If you are running their "System Check" tool, you can copy and paste the results presented here?
http://TurboTax.Intuit.com/support/IQ/install-product/TurboTax-2010-system-requirements/GEN12939.html
(Specifically: https://turbotax.intuit.com/support/detect/index.jsp )The results of the example:
Operating system: Windows Version of the operating system: 7 (x 64) Web browser: Internet Explorer Version of the Web browser: 8.0 Status of JavaScript: Activated Flash version: 10 Screen resolution: 2560 x 1600 Popups: Popups allowed User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C; InfoPath.3) Past through their list of common interest issues?
http://TurboTax.Intuit.com/support/IQ/install-product/Windows-Installer-and--NET-errors/SLN12216.htmlSpecifically their installation problems?
http://TurboTax.Intuit.com/support/IQ/install-product/Troubleshoot-installing-and-running-TurboTax--Windows-/GEN12454.htmlHTH
-
Problem with access to WV and HAVE
So I see a few problems with the two Appstacks and writeable volumes in 2.5.0 which I think relate just a matter of what needs to be changed.
- Writable volumes
- I have 2 accounts for my account that I attributed an accessible volume writable on a specific system. When I log in the system in question that subscribe to the Windows profile Service is unable to load. If I am in the same system with my secondary account on the same system I have no problem. If I kill the accessible volume writable in the Manager of that then I can login with my account first without problem.
- I checked that I have no profile on the system, because it is a fresh charge and I use a local administrator account to join to the domain.
- App stacks
- If I attached a test battery to a provisioning system and try to install the software I could not create the directory "C:\Program Files (x 86) \Cryptophane" error 5: access is denied. As soon as I cancel the commissioning Manager of installation of the software is complete without problem.
The service account, I'm under Manager of appVolumes as the role of the admin
If I connect to vcenter I can watch the virtual machine and see that the volumes are attached to the virtual machines in question.
I tried several versions to see if there is something defined in Windows which is causing the problem.
If a solution has been found. It turns out a GPO has been the cause of the problem. Once I added my test machines to an exclusion it resolved the problem.
The policy in question contains the following settings that were the culprit
Access to the removable storage / system
- All removable storage Classes: deny all access-enabled
- WPD Devices: Deny access read-enabled
- WPD Devices: Deny access to write-enabled
Is about to test an App stack, but this seems to be the culprit.
- Writable volumes
-
When will you support Croatia both individual and business?
When will you support Croatia both individual and business?
Croatia joins EU 1. July 2013.
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)Creative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.htmlAdobe resellers http://adobedealreg.force.com/PartnerSearch?lang=en
-http://www.adobe.com/content/dam/Adobe/en/products/creativecloud/cc/pdfs/cc-availability-m atrix.pdf
-
Dreamweaver, several Adobe accounts and Business Catalyst
I asked this question before on another thread of DW forum but, for now, no response.
As this problem became a real problem for me, I would like to than DW and Adobe BC to lean engineering teams on this.
Here's the scenario.
My Adobe personal account has been updated since many years of individual applications in Creative Suite and is now used for my creative cloud subscription.
When I became a partner Adobe BC, I decided because it would be for commercial use only I should create a second Adobe account.
At no time during the partner registration process Adobe BC did I read all of the instructions from Adobe advises me not to.
With Adobe Muse, in the preferences panel, I can happily switches and publish sites to two my staff or business accounts Adobe. BC
However, this is not possible in DW.
The Business Catalyst Panel always connects to my personal account of Adobe BC - that is provided as part of my creative cloud subscription.
I need to be able to publish sites to my Adobe BC partner account.
In summary, I pay for Adobe Dreamweaver, as part of my creative cloud subscription, but can't really use it to develop websites for clients.
Can someone from Adobe please look at this and tell me how to solve.
Thank you.
Okay, so today I managed to solve the problem I described above, i.e. to develop websites using Adobe Dreamweaver and my personal ID Adobe CC, but publish websites on Adobe Business Catalyst that requires my Adobe ID company.
Here are some tips if you have encountered a similar problem.
Basically ignore sign Business Catalyst of Dreamweaver.
In Dreamweaver to open the panels to manage the Site, select the site you want to publish to Adobe Business Catalyst, then click the button change site select currently.
In the dialog box of configuration of the Site, in the list on the left, click servers, and then below the list of servers in the middle of the dialog box, click the button Add a new server.
In the base dialog box, name your server if you want, for example I've named mine Adobe BC.
Then, I changed my connect to help: to FTP SFTP.
Change the SFTP address to: yourwebsitename.businesscatalyst.com
Authentication: User name will be: yourwebsitename.businesscatalyst.com/ [email protected]
Password: YourAdobeBCLoginPassword
If any of the above information has been entered correctly, when you press the TEST button, Dreamweaver needs to connect to AdobeBC successfully.
Use the files Panel to connect to BC and was able, Get Adobe or synchronize files as required.
By the foregoing, I am now able to develop, update and manage corporate sites Adobe BC using Dreamweaver, happy days!
-
NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he tried to put the itunes thing but it says enter password I put in what I rember, then said lokced for five minutes help me pls
Without knowing the password for your iPhone, there is no way to unlock it, bring even you to the Genius Bar. If you continue to enter the wrong password, you will be locked out of your iPhone, and your data will be unaccessable.
-
Problem with PowerPoint (office 2011) and El Capitan
After the upgrade to El Capitan 10.11.6, 2011 PowerPoint desktop slideshow feature will not work. I tried this with existing PowerPoint files and a new one that I just created. This problem exists with both .ppt and .pptx file versions. Everyone knows about this problem? If so, what it is, was the solution?
You could try asking on a Microsoft PowerPoint for Mac forum: http://answers.microsoft.com/en-us/mac/forum/macpowerpoint
-
Hello, my phone pulled from my class at school and it has no data on it, so I did not no how to locate without using find my iphone is there another way I could find as soon as possible
Go to iCloud.com
Then sign in with your Apple ID and password, then click the Find iPhone.
If this does not help, see: If find my iPhone is not activated on your missing device > what to do if your iOS device is lost or stolen
-
new downloads cause a continuous scroll effect. currently have 12.0 and doesn't have this problem. have a brain injury and cannot have this fast scrolling
each time new updates are coming they seem to cause scrolling the page.
I need a mobile page where I'm in control of how it moves.
I'm afraid that if I don't keep current updates that computer security will be compromised.
Thank you
P.Where do you find this scroll?
Is it in a browser window or in the Download Manager window or another?
Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).
- Do not click on the reset button on the start safe mode window or make changes.
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
Please upgrade as soon as possible to the current version if you have downgraded because of this problem.
If there is a problem with scrolling on web pages, then try to disable smooth scrolling.
- Tools > Options > advanced > general: navigation: "Use smooth scrolling".
-
Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the problem? Thank you
That may be a problem with the DDE.
Try to undo and redo Firefox as default browser.
Make a different browser like IE browser by default and then let Firefox do it again.
See: -
I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update. Before the update if I had minimized windows they would be reduced when I opened a new window. Need help please, I guess it's just a setting somewhere but I can not understand where is the parameter. Thank you jason
http://about.ask.com/APN/toolbar/docs/default/FAQ/en/FF/index.html#Na4 is Ask FAQ on how to uninstall the toolbar.
-
Are there problems with Firefox 5.0 and 1Password 3.6.1?
I started to update to Firefox 5.0 and noticed a message that the 1Password version I had at the time would not work with Firefox 5.0.
Are there problems with Firefox 5.0 and 1Password 3.6.1?They say you need 1Password 3.6.0 or later to work with Firefox 5.0
http://Forum.agile.WS/index.php?/topic/5319-Firefox-5-requires-1Password-360-or-later/
http://help.agilebits.com/1Password3/firefox.html
Maybe you are looking for
-
Research and open web pages in a blue underlined wrong format
I have a new computer with windows 10 and added firefox as my browser. I tried to change the way in which a new page will open and you've got something screwed up. I refreshed firefox, uninstalled and reinstalled and even changed the subject: config
-
adding music to iTunes for slide show
I can't understand how to add music to a slide show of pictures of my iTunes library. I can't find the album, but the songs are not highlighted and can't be selected in program pictures. I tried to keep iTunes open and also tried to download music on
-
Satellite A100 - connect off / breaking load programs
My Satellite A100 fails to log - I have to use the button ON / OFF to turn off.When I re - start, several programs fail to load, including the word.And my Sophos anti-virus has been "disabled". Can anyone help identify the blocking and the solution,
-
Qosmio G20: How to disable/bypass SCMS-T for adiosyn with a bluetooth headset?
Hello all,. I recently bought a set of bluetooth stereo headphones (Creative CB2350) and found that, because of the inclusion of SCMS-T copyright protection I can't audiosync directly to my computer laptop bluetooth stack (Qosmio G20). The headphones
-
Should what Satellite P300 I exactly?
Hello I have a Satelite P300. I'm a little confused here I see others talking about their P300.I see mention P300 - 1 5, P300 - 19 p, P300, P300-1GC - 23 M. My Satellite, when I look underneath only said "Satelite P300", below it says pspcca-05Yy01Y