Similar Questions

• problem of size for the file cfspreadsheet

  When I read in a list of spreadsheets Excel, sorted by size.

  with < cfspreadsheet >, everything goes well until the tag hits a file

  more than 2MB.  That's when I get this error:

  An error occurred when reading the Excel: org.apache.poi.hssf.record.RecordInputStream$ LeftoverDataException: initialization of the 0xFF folder left 6 bytes remaining to be read still...

  This invariably produces a file size of 2 MB.  The files are Excel 2003.  The important factor only that I can see, is that I have quite a few columns in my spreadsheet.  The columns go completely to "CX".

  Fact < cfspreadsheet > have some sort of limit when it comes to the size of the file and/or the columns?

  TIA

  Zach

  I don't know what the cause of the problem. But after reading the much larger files, with more columns, I am not yet convinced that it is only a problem of size.

  -Can you read any of the files over 2 MB, or those with a similar number of lines and columns?

  -Strange characters or involved charsets?

  -No idea what program produced the files? Either display the metadata or the headers?

  When I saw this problem a few months back, I poured

  hours up and down search it on Google and found very

  little.

  Have you ever tried crossing the POI BiffViewer files?

• How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above.  This problem occurs when I try to convert a word in a PDF doc.

  How to prevent the appearance of "Failed to open Document" "Please check if you have read permissions for the file above? This problem occurs when I try to convert a word in a PDF doc.

  Hi [email protected] ,

  Please try to follow the steps mentioned in this thread with a similar problem: Impossible to open the document. Please check if you have read permissions for the above file.

  Also, let us know the acrobat version you have and the version of the OS on your system.

  Let us know if that helps.

  Concerning
  Sarojini

• Is this really the case with the free player, the clients can access is no longer a PDF to add comments and mark out? We have always used a PDF file for the reviews of books/documents, but now we hear customers that there is no way to add comments and ann

  Is this really the case with the free player, the clients can access is no longer a PDF to add comments and mark out? We have always used a PDF file for the reviews of books/documents, but now we hear customers that there is no way to add comments and annotation. Please let me know if this is the case, or if there is a solution

  '' If '' they use the free software Adobe Reader and "If" there is no security prevent this, he should be able to add comments.

  It'll be hard to say what's wrong without more details such as what exact version of the reader they use, they open the pdf file in a browser or in the player itself and what exactly happens when they try to add comments.

• CAN´t access my files on creative cloud. "Temporarily unavailable page. We will be back soon. "' We are working quickly to resolve the problem and apologize for the delay." Check back later or visit our website for updates of status. In addition, you can

  Hello

  Since a few days I tried to access my files on web creative cloud without success. I ve had this message only:

  "Temporarily unavailable page. We will be back soon. »
  "We are working quickly to resolve the problem and apologize for the delay."
  Check back later or visit our website for updates of status.
  In addition, you can get help in forums of the creative cloud.
  Thank you for understanding! »

  (I used Google Translate)

  Help someone?

  Not sure if you've managed to solve this problem yet or not. I do not no what are the contents of your proxy script, but it's something that you (or your company) you have to solve.

• Adobe still the software that is used to decode the media is not available on this system. install the correct decoders for the file you are editing can help fix the problem

  Hello

  I got this message after the import on ten H.264 files that I coded for Adobe media encoder.  "It is not available on this system from adobe yet the software that is used to decode the media. install the correct decoders for the file you are editing can help fix the problem. »

  The files that we have shot with HD cameras.  Edited in Premiere Pro CS3.  I installed the update 3.0.1 with always the same error.

  I also tried a new project and after about ten or so files imported into a timeline, the breakdown of the system.  I tried twice...

  Thanks in advance

  Please report to us. I don't know the exact specifications. for stills in still, the limit is 4000 pixels in the largest dimension for PrPro.

  Now, I must add that in PS. resizing algorithms are better, in my opinion, than those of PrPro and again. This means that there is nothing to gain and quality of untying, important images much larger than the size of the frame of the project, i.e. of 720 x 480 for NTSC SD projects yet. The size of the image will be the limiting factor, so scratch that.

  Even in projects PrPro, I resize to exactly what I need. If I will not pan on a zoomed image, I resize it to the size of the image of the project. If I move on a zoomed image, I resize just what I need.

  Good luck

  Hunt

• a problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory

  When looking at the module a LabVIEW VI called for TestStand, I get the following message:

  A problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory.  Please reinstall or repair.

  I made the mistake of cleaning C: in my computer.  Clean the C:\National Instruments downloads

  Why would someone put bits of applications or modules, etc. in such a directory?

  I'm not too crazy about restoring 11FR in this folder.  It's just crazy!

  If anyone has encountered this before?  No "easy"? outside re - install TS...

  Side note: I do not touch anything in the \Program files. National Instruments\TestStand\AdapterSupport\LabVIEW

  What version of LabVIEW and TestStand do you use?

  In 2012, TestStand, this directory is mapped to:

  C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2012\AdapterSupport\LabVIEW

  Have you tried mass compiling the screws in this folder?

  I had to create a new 'TestStand - default values XX.llb"file, where XX is the last version of LabVIEW you use, but I have not seen this message before.

  Good luck

  PH

• Write delay failed unable to save all the data for the file $Mft

  Have a frustrating problem.  Help is greatly appreciated.  Learned the hard way and lost a dwg important issue which was unrecoverable.  Bought a new drive external hard seagate.  Could not back up the entire system with software pre-installed.  Download acronis true image home 2011.  Tried to backup system.  Receive error when trying to backup messages; 'Delay to failure of Scripture; Reading of the sector; Windows was unable to save all the data for the file $Mft. The data has been lost.  Have tried many fixes.  Unable to disable write caching method (grayed out / unclickable).  Played regedit 'EnableOplocks' is not listed to select.  Attempted to run microsoft 'fix it' and got the blue screen of death.  Short hair out of my head.  Suggestions appreciated.

  I don't know where Microsoft 'Technical support engineers' get their information.

  Write caching without a doubt "does apply to external hard drives", but it is usually disabled to prevent to sort the problem you are experiencing.

  I've seen several positions reporting to the same question that you do.  All of these positions were with SATA drives.  Is your Seagate eSATA drive?

  The disc is recognized as an external drive in Device Manager?  In Device Manager, go to the drive properties dialog box and click the policies tab.  An external drive should have two options: "Optimize for quick removal" and "Optimize for performance".  An internal hard drive shows the options as gray (with 'performance' selected), but there should also be a checkbox "Enable disk write cache" under the second option.

  What shows in your policies tab?

  If I understand correctly, "writeback" or "write behind" is implemented by disc material or its pilot.  If the option is not available on the drive properties > policies tab, I would suggest to contact Seagate support.

• I set up ftp in iis for the file transfer. On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.

  FTP problem

  I set up ftp in iis for the file transfer.  On the pc that I am currently in place I cannot transfer files to it via ftp. He says that the password is not accepted.  When I look in the properties of the default ftp sites ftp I noticed that the Directory Security tab is not there as on the other pc.  How to return this tab or is it the windows software that's not fair.  I am running windows XP 2002 SP2 on it and I've updated to SP3.  I have no idea.

  Hello

  I suggest you to send your query to the link for assistance.

  http://forums.IIS.NET/

• I just want to know if there is a problem if I delete the files '%Temp%' race

  Hey guys, I just want to know if there is a problem if I delete the files '%Temp%' run! ???

  Free disk space
  Last updated 18/01/2014
   

  Content

  • To see how much space you have used and free
  • To see where the files are too much space
  • Disk Cleanup
  • System restore
  • Fix the basket
  • Fix temporary Internet files
  • Delete files in the system and the folder Temp of Service Profiles
  • Check the size of the swap file
  • Disable the hibernation
  • Compact the Windows databases use various
  • Delete the files updated by the Service Pack
  • Move your Documents
  • Remove saved files created by Photo Gallery
  • Which extends the size of the disk
  • Compress files
  • Turn off the low disk space warnings
  • Boost disk cleanup
   

  To see how much space you have used and free

  Start - All Programs - Accessories- Click with the right button on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  For the system drive

  WMIC volume where (DriveLetter = '% lecteur_systeme %') are legend, capacity, freespace List

  For all readers

  WMIC volume get/all, freespace, the ability, the legend

  If you want to store this info on your desktop

  WMIC /append:"%userprofile%\desktop\Free on disk space" volume get Caption, freespace format:htable

  To open double click on Free Disk Space on your desk or type

  Start "" "%userprofile%\desktop\Free report.HTML of disk space.

  Then come back here after cleaning and repeat these commands to see the difference.

  If for any reason, the wmic command does not work, use these two commands. Both take a lot of time.

  % Lecteur_systeme % - one defrag

  or

  dir %systemdrive%\*.*/a/s

   
  To see where the files are too much space
   
  It lists the number of files and the size of the folders on your drive. Each command is a subset, so you can run it better.
   
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
   
  Then configure the command prompt. Right-click on the tab of the titlebar - Properties - Layout command prompt - and enter 1000 screen buffer size height and 43 (or 50) to Window Dimensions height. Change the color (color tab) and the police (police tab), if you want.
   
  To see the size of the folders in Documents, excluding images, video, or music files.
   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Personal"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "\/"^|findstr/l/v "photos video" ') @echo %j & echo. "

   
  To see the size of the folders in the music.
   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My music' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the image files.

   

  for /f "Skip = 2 tokens = 4" %A in (' Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" "My pictures" /v ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files in the video.

   

  for /f "Skip = 2 tokens = 4" %A in ('Reg query "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v 'My videos' ") set Doc = A %

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

  To see the size of the files on the desktop.

   

  for /f "Skip = 2 tokens = 3 ' set doc = A %%A in ('Reg query"HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders"/v"Desktop"")

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("dir"% doc"/ a/s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

  To see the size of the files in the Windows folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%windir%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   
  To see the size of the files in the Program Files folder.

   

  for /f "usebackq tokens = 2 * delims =" %i IN ("'%ProgramFiles%' dir /a /s ^ |") "." findstr/i/v "-/"') @echo %j & echo. "."

   

   

  Disk Cleanup
  To run Disk Cleanup, normal is to click with the right button on the drive in my computer (Start menu - computer), then Properties - general tab - Disk Cleanup button.
   
   
  Another way is menu Start - All Programs - Accessories - System - Disk Cleanup tools.
   
  Disk Cleanup can be started from the command line.
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   
  To make your primary drive.
   

  cleanmgr letter

   
  Choose which lead to do.
   

  Cleanmgr

   
  See the last section of this post to see how to performance of disk cleanup.

   System restore

  With disk cleanup displays above the Other Options tab. You can delete all but the last System Restore point and see if that is too much space.

  System Restore uses 15% of the space normally. Change click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit and navigate to

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg

  Double click on DiskPercent and click on decimal and change the value to the desired percentage,

  You can change the command prompt.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the system restore folder.

  You don't normally have access to this folder. You will need to take possession, allow administrators to permission, then the size of the query.

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  dir "%systemdrive%\System Volume Information" / a/s

  To see the current percentage

  Reg query "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent

  It is in hexadecimal. The numbers are 0-9 and a-f. So 0xf is 15. 0x5 is 5, 0 x 9 is 9, 0xa is 10, 0 x 14 is 20.

  To set a different value.

  You can use decimal values to set. This affects 10% (in bold in the example and the last item in the line).

  Tracking Add "HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\SystemRestore\cfg" /v DiskPercent /t REG_DWORD /f /d 10

   
  To repair the system restore, file delete and restart the system restore.
    

  SC stop vss

  takeown /f "%systemdrive%\System Volume Information" / a r d y

  ICACLS "%systemdrive%\System Volume Information" / grant administrators: f, t, c, q

  e "%systemdrive%\System Volume Information" / q/s

  SC start vss

  Fix the basket

  Sometimes, files get lost in the trash. Remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.

  Empty the trash.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the size of the files in the Recycle Bin

  It must have one or no files inside if you work. There should be a directory (folder) by user.

  dir % systemdrive%\$RECYCLE. BIN\ *. * /a /s

  To reset the trash

  e % systemdrive%\$RECYCLE. BIN/s/q

  Fix temporary Internet files

  Sometimes, files get lost in the temporary internet files folder. Delete the files. It will be automatically recreated the next time download you. It will remove the current user only.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see the temporary internet files size empty files folder

  RunDll32.exe InetCpl.cpl, ClearMyTracksByProcess 8

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

  Then delete.

  First close Internet Explorer. Some files may not remove at the moment, they can be deleted later.

  "%userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files" del /s /q

  So to see the new size.

  dir ' %userprofile%\AppData\Local\Microsoft\Windows\Temporary Internet Files\ *.» * ' / a/s.

   
  To see the size of the cache, type the following
   

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

   

  Reg query /v "Settings\5.0\Cache\Content Software" CacheLimit valid

  Use the calculator to convert hexadecimal into decimal. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter the value returned above. Menu display - decimal. To convert windows units divide by 1024 for kilobytes, divide by 1024 megabytes.
   
  Located between 50 MB and 250 MB. You can use decimal here. The unit is expressed in kilobytes. Here it is 250 megabytes (250 000 x 1024 bytes)
   

  Add tracking 'Software Settings\5.0\Cache\Content' v CacheLimit valid /t Reg_DWord /d 250000 f
  

    

  Delete files in the system and the folder Temp of Service Profiles

  The system temp folder is only used when no one connects. It is rarely used but never cleaned. Some services have their own temporary folder which is also cleaned.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To the list

  dir c:\windows\temp C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp/a/s

  To remove

  del C:\Windows\ServiceProfiles\NetworkService\AppData\Local\Temp\*.* C:\Windows\ServiceProfiles\LocalService\AppData\Local\Temp\*.* c:\windows\temp\*.*/s/f/q

  Check the size of the swap file

  As a rule generally you want to your swap file slightly larger than the amount of memory that you have. It develops automatically but spread automatically. If you use hungery memory programs as this video editing should be bigger. If too big you can reduce and rush of space can be moved to another drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see what was your use

  WMIC pagefile get List

  To see the size of the file on disk

  dir /a c:\pagefile.sys

  To change the size or change the road see change the size of virtual memory in Start - Help and Support.

   

  Disable the hibernation

  The file shows up is the same size of installed memory. If this is not the case, turn off the computer in hibernation and save a lot of disk space.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  To see if it is on

  If the file will be found. If off the file won't be there.

  dir %systemdrive%\hiberfil.sys /a

  To turn off

  powercfg-h off

  Make a u-turn

  powercfg-h on

  Compact the Windows databases use various

  You can compact the various databases that Windows uses. This is the Windows Update, Windows Search, and certificates of security, Windows Mail, Windows Contacts, Windows, Windows Live and Internet Explorer ver 10 applications calendar.

  Close Windows Mail and Internet Explorer. Wait a minute for Internet Explorer release locks of sound files.

  See how much space taking up type which is below and note the total size (because it scrolls away).

  Start - All Programs - Accessories- Click with the right button on command prompt and choose Run As Administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  Then at compact

  SC stop wuauserv

  stop bits SC

  SC stop wsearch

  SC stop cryptsvc

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /p "%A" / o

  for c:\ /r %A in (*.edb *.msmessagestore WebCacheV*.dat catdb *.) do esentutl.exe /d "%A".

  SC start cryptsvc

  SC start wsearch

  SC start bits

  SC start wuauserv

  Then to delete some temporary files.

  del c:\*.integ.raw c:\TEMPDFRG*.edb/s

  To see the new size and compare it to the old size

  dir c:\*.edb c:\*.msmessagestore c:\WebCacheV*.dat c:\catdb/a/s

  If a program has a file open, you can use this procedure to find out which program.

  openfiles/local on

  Reset

  openfiles/query /v | findstr /i "WebCacheV [0-9] *------catdb \.edb \.msmessagestore .dat".

  Delete the files updated by the Service Pack

  See how much space taking up type which is below and note the total size (because it scrolls away). Also, note that the total is higher than it actually is.

  This will remove the ability to uninstall service packs.

  According to the service pack that Windows was provided with you can have both, one or none of these two files.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  dir /a /s c:\Windows\WinSxS

  Then type

  Vsp1cln.exe

  COMPCLN.exe

  To see the new size and compare it to the old size

   

  c:\windows\WinSxS dir /a /s

  Move your Documents

  If you have another disk, you can move the documents folder to it.

  Click with the right button on your Documents (or pictures, etc.) Office, videos, Contacts,) the tab file - Properties - location - move.

   

  Delete the thumbnail and icon Caches

  These files can contain thumbnails or icons of files deleted a long time ago. The files will be recreated if necessary.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste). The desktop and the start menu will disappear briefly.

  To see the size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

  then remove

  Taskkill /im explorer.exe/f
  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  
  attrib - r s h '% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db '.
  del "% userprofile%\AppData\Local\*.db".
  del "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db".
  Explorer

  to check the new size

  dir "% userprofile%\AppData\Local\*.db" "% userprofile%\AppData\Local\Microsoft\Windows\Explorer\*.db" /a

   

  Remove saved files created by Photo Gallery

   

  Photo Gallery Windows makes a copy of any file that you are editing. Click Start - All Programs - Accessories - (or press the Windows key + R). Type

  Images of the hull: original

  Delete the ones you don't want.

  Which extends the size of the disk

  If all the space on the disk has not all been used it is possible to extend your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  DiskPart

  then type

  Select the c volume:

  Then type to see in size

  the list volume

  then (it will work if possible or not as appropriate)

  extend

  type to display the new size

  the list volume

  then type exit

  output

  If you want advice on the extension of the partition type the following and paste the result back

  DiskPart

  list disk

  the list volume

  Select disk 0

  partition from the list

  Select disk 1

  partition from the list

  output

  To copy the final text right click in the window - Mark , then select the text and press enter.
   

  Compress files

  There are two ways to compress files in windows. Zip files and built-in file compression. It's built-in file compression. For more information on compression type zip in Start - Help and Support .

  Photos, music and video are already compressed. They can get larger if Windows tries to compress it any further. Also usually a bad idea to compress system files.

  If you have files of worksheet they can very well be compressed. If you have files, installation files, they can also be good candidates. Web pages are also good candidates.

  In Windows Explorer, blue file names means Tablet (it is the file system compression not aka zip files compressed files). Green filename means Encrypted.

  To disable file names colored, in Explorer - Tools menu (Alt + T)- display tab and then clear the check box for Show encrypted or compressed NTFS in color .

  Windows compression, encryption and security to work for the most part by applying attributes to a folder and the files in the folder inherit the folder.

  If you have all the files appropriate for compression, find them in solution, made Explorer right click - Properties - general -Advanced button tab - Compress contents to save disk space. Choose to apply to all files and folders when asked.

  To use a command line to compress the files in the Favorites folder.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  compact/c /s:"%userprofile%\Favorites." *

  Put in Favorites to compress files added

  compact/c /s:"%userprofile%\Favorites.

  To view the details of the compression of the Favorites folder

  Compact '% userprofile%\Favorites\*.* '.

   

   

  Turn off the low disk space warnings

  To disable the function to display the disk low space warnings.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer" v "NoLowDiskSpaceChecks" /t REG_DWORD /d 1 f

  gpupdate/force

   

  Boost disk cleanup

  • Operation of disk cleanup
  • Schedule disk cleanup
  • Creating custom cleaners

  To see a list of products of cleaning disk cleanup.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  @echo. & @echo list of cleaners&@echo = & FOR /F "usebackq tokens = 8 delims =-' %i IN ('reg query 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\VolumeCaches'") @echo %i

  
   List of cleaners
   ================
   Active Setup Temp Folders
   Content Indexer Cleaner
   Downloaded Program Files
   Hibernation File
   Internet Cache Files
   Memory Dump Files
   Microsoft_Event_Reporting_2.0_Temp_Files
   Offline Pages Files
   Old ChkDsk Files
   Previous Installations
   Recycle Bin
   Setup Log Files
   System error memory dump files
   System error minidump files
   Temporary Files
   Temporary Setup Files
   Temporary Sync Files
   Thumbnail Cache
   Upgrade Discarded Files
   Windows Error Reporting Archive Files
   Windows Error Reporting Queue Files
   Windows Error Reporting System Archive Files
   Windows Error Reporting System Queue Files
   WLX Thumbnail Cache
  

   

• OneDrive of browsing for the file of the company is blocking explorer.exe with visual c ++ runtime error

  I posted this in the OneDrive for business forums and was told to come here because they were not able to climb it - a few other people responded saying that they had exactly the same problem.  I copy + paste the original message here.

  OK, now let me preface this by saying: I was fix this for the better part of a week and I am puzzled.

  I work in the it Department for business (~ 200 employees) medium, we have recently migrated our the server local exchange to Exchange Online (we are now using a mixture of licenses Office 365 E1 and E3) and we have since then all members of society with their synchronizations of OneDrive.

  About 200 people, that we have put in place, there is a person who has this problem - when he opens the file Explorer and looks in his folder OneDrive @ company, less than a minute, it will get a Visual C ++ runtime error and explore crashes / restarts and is able to work again.  Of course, within a minute, the same thing happens. It is under windows 7 x 64.

  This particular user has a mixture of files .dwg-AutoCAD, PDF, word/excel files and jpg files on his onedrive for a total amount of approximately 7 GB.  It uses the preview in the Explorer pane, and I saw a similar problem during its use in the past, so I applied the patch and it did not help.  If I disconnect his onedrive and move his files back in its documents folder, it can browse its files without any problems whatsoever (including using the preview pane).

  want to hear the best part?  I set him up on a laptop quite different from ZERO and it does EXACTLY the same thing!  No one else in the company is having this problem, and almost every other laptop that we deployed using the same exact configuration.  I'm starting to think, it could be a problem with his records, but I'm not sure - go to synchronize its reader to my computer to see, even if I'm on windows 8.1.

  Everyone knows about this type of problem?

  Also, I already tried to delete the cache of records office and completely reinstalled onedrive on the original computer.

  This is clearly a problem inherent in the OneDrive itself.  Let me know if any kind of logs are needed.

  I could never get anyone to help me here so I ended up spending the user assigned to windows 8.1 and it helped.  Sometimes it happens again but windows 8 is much better at handling explore crashes, so it's just a quick blip and he is back at work.

  Good luck.

• Given the file name or path contains Unicode or DBCS characters. Retry using ASCII characters for the file name and path whatever that means? This happens when I publish an OAM

  Given the file name or path contains Unicode or DBCS characters. Retry using ASCII characters for the file name and path

  What does that mean? It happens when I try to publish an OAM for Dreamweaver.

  Also: How can I specify the onboard browser animate? It's just going as far. Are there no preference to animate it dashboard?

  BTW. Just call him edge. Seriously. You call Illustrator draw? Photoshop editing?

  No, my file name is mainContent.oam

  My project name is mainContent.an

  This error occurs when I try to import into Dreamweaver. Sorry, I was unclear about that earlier.

  I thought maybe it was because I had saved my image as a png image. So re-saved as an svg, still get the error.

  

  Should I have a setting is CC of Dreamweaver that will not? I should try this in Dreamweaver CS6? I might try that next.

  Why is this so difficult program? I know that Flash. I know that After Effects. I can work the chronology part simply awesome. He's still export I have problems.

  On a MacPro, 10.7.

  You are a person of Adobe or simply a beautiful assistance program?

• Problem with pdf for the opening of the health gov Web site.

  Problem with pdf for the opening of the health gov Web site. I use my ipad in Safari and have installed the application to adobreader. Healthcare gov support only suggested to disable the pop-up blocker. I did, and I couldn't always open the file. No problem on a desktop computer regardless of the browser.

  In my view, they spend on their web server to a document ECM server authentication. Someone else has the problem?

  I tried the Penguin, Chrome and Atomic browsers on the ipad and the same issue.

  Thank you!

  Keren

  Okay, actually, I think that there is a problem with the type of form. It is a form of a special kind (called a form XFA or Designer, for what it's worth), which can be opened with Adobe Reader and only on Mac or Windows. There is no iPad software that can read these.

• The file is too large for the file system

  While the installation of a new Virtual Machine or add a new hard drive to ESXi, I get and error message saying 'the file is too large for the file system. Could someone help to find out what it is and how to fix it?

  What is the HARD disk that you want to add to your virtual machine?

  It may be a problem with the block on your Lun size

  1 MB = 256 GB

  2 512 GB

  4 MB = 1024 GB

  8 = 2048 MB

• Cannot open the document. Please check if you have read permissions for the file above.

  System:

  • Adobe Acrobat X Pro, 10.1.2
  • Windows 7 Enterprise, 32-bit
  • Badass de Core Quad CPU
  • 4 GB OF RAM
  • MS Word 2010 (Office 2010)

  I installed the latest version as an administrator and as an administrator. I have all the rights to all the files on the PC.

  When I try to create a PDF file from any Word document, if. DOC or. DOCX, I get an error window everytime:

  "Cannot open the document:

  "[document location]".

  'Please check if you have read permissions for the file above.'

  This occurs after the notice appears little "start of the application that created the document...". »

  If I open Word and create a PDF to the Ribbon, it works. It still only allows me to create from Acrobat.

  It creates a PDF file of Excel files, but not the DOC files. I looked for alternatives, but found nothing. I found that July 2011:

  "I have discovered Adobe support that it is a known problem with Office 2010 SP1 installed. It is news for someone of another encounter this problem, remove the SP1 and it will work ok. They said an update to fix this will be coming in the next quarter. »

  I have updated to the latest version 10.1.2 and I still have this problem.

  This is a major problem because it also fails on the batch conversions, which is what I really need for 100 or if the documents which must be PDFed. I'm not going to open each individual file and save each word.

  This is a KNOWN PROBLEM with Adobe, and if you look through the forums, you will find a lot of people having this problem, and so far, I have seen no solution.

  If anyone has found a solution, please report it here.

  Thank you!

  B

  Thus, the conversion does not work the first time if you remove the Normal.dotm? You have group policies that change your path models user (for Word) on a network drive?