Problems of performance after a random amount of time

Similar Questions

• Is there a way to plan signed documents to remove automatically after a specified amount of time?

  We would like to set up a schedule for auto-Delete on our EchoSign account signed documents. We are able to have on the documents for signature at expiration and auto-delete.  Is it possible for those signed?

  Thank you very much

  Laurent

  Hello

  Customers can request a data retention policy is set to EchoSign account. Once the data retention is configured, the service automatically removes agreements that have reached their terminal State (signed, canceled, expired) accounts receivable. A change of Document retention contract must be signed by the customer until changes are made.

  For more information please contact support.

  Jat

• Remove a movieclip from the stage after a fixed amount of time (or once it has finished its animation)

  I have a movieclip animation that is added to the scene at the beginning of the .swf.  His introduction to the game and the user is asked to click on the movieclip to start the animation.

  Once the animation is complete, I would like the movieclip to be removed from the scene.

  How can I do this?  Can I set up a kind of event handler that listens on if the movieclip has completed then start a function once its finished out of the scene?  What methods to look out for the finishing of the movieclips?

  See you soon

  There is no particular event that is called when a movieclip stop playing games,

  what you could do is inside your shipment of movieclip intro an event as soon as the animation is completed

  something like... dispatchEvent (new Event ("introFinished");

  and all you have to do is add and event listener for movieclip intro intro.addEventListener ("introFinished", onIntroFinished);

  When your onIntroFinished is called, you can remove the intro to the scene.

• Problem of election after split-drain repeated with two nodes

  Hello
  
  I use a custom source based on BDB - 5.1.19 (excxx_repquote)
  
  with two site-MASTER and SLAVE on the other...
  
  NSite = 2
  ACK = quorum
  
  -the master is written at the rate of 10 txn quotedb per second
  -l' test is to isolate the customer from the master (brain) and reconnect after a random time include 1 sec to 10 sec
  
  the test run of about 10 times, but at some point, the slave to process receive DB_EVENT_REP_ELECTION_FAILED
  and the captain enter the mode of election and never leave the CLIENT mode. I have to say that I decided to freeze the client to kill me (kill-9 my pid) when I get this event...
  
  
  Here is the log in light on the master...
  
  [1307872770:871621] [6510/47655809107168] MASTER: rep_send_function returned: 110
  [1307872770:973655] [6510/47655809107168] MASTER: bulk_msg: Send copy due to PERM after buffer
  [1307872770:973667] [6510/47655809107168] MASTER: send_bulk: send 266 bytes of the buffer in bulk (0x10a)
  [1307872770:973672] [6510/47655809107168] MASTER: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type bulk_log, LSN [21] [986648] perm
  [1307872770:973693] [6510/47655809107168] MASTER: wait for the acknowledgement of receipt: need 1
  [1307872771:26623] [6510/47655809107168] MASTER: rep_send_function returned: 110
  [1307872771:126380] [6510/1162996032] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, Journal type, LSN [21] [946345]
  [1307872771:126407] [6510/1162996032] MASTER: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type dupmaster, LSN [0] [0] nobuf
  [1307872771:126695] [6510/1162996032] MASTER: rep_start: old version 17 journal found
  [1307872771:126753] [6510/1162996032] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type newclient, LSN [0] [0] nobuf
  [1307872771:126833] [6510/1183975744] CUSTOMER: from the election thread
  [1307872771:126876] [6510/1183975744] CLIENT: Start election Europe 2, ack 1, priority 100
  [1307872771:126890] [6510/1183975744] CLIENT: Election thread has egen 69
  [1307872771:127423] [6510/1173485888] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type newclient, LSN [0] [0]
  [1307872771:130079] [6510/1183975744] CLIENT: count VOTE1 [0] (2147483647, 69)
  [1307872771:130113] [6510/1183975744] CLIENT: count an election
  [1307872771:130134] [6510/1183975744] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type vote1, LSN [21] [986728] nobuf
  [1307872771:130147] [6510/1173485888] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 68 eid - 1, type master_req, LSN [0] [0] nobuf
  [1307872771:130438] [6510/1152506176] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote1, LSN [21] [946437]
  [1307872771:130460] [6510/1162996032] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [21] [986728]
  [1307872771:130467] [6510/1152506176] CLIENT: update of gen from 68 to 70
  [1307872771:130482] [6510/1162996032] CLIENT: received egen ALIVE of 71, 69 mine
  [1307872771:130503] [6510/1162996032] CLIENT: Election completed in 0.003602000 sec
  [1307872771:130515] [6510/1162996032] CLIENT: Election; Egen 70
  [1307872771:130534] [6510/1152506176] CLIENT: received vote1 egen egen 71, 71
  [1307872771:130581] [6510/1152506176] CLIENT: count VOTE1 [0] (0, 71)
  [1307872771:130593] [6510/1089075520] CUSTOMER: from the election thread
  [1307872771:130619] [6510/1152506176] CLIENT: Vote Incoming: (eid) 0 (pri) 100 ELECTABLE (gen) 70 (egen) 71 [21,946437]
  [1307872771:130642] [6510/1152506176] CLIENT: not in election, but receipts vote1 0x282c 0x8
  [1307872771:130674] [6510/1089075520] CLIENT: Start election Europe 2, ack 1, priority 100
  [1307872771:130692] [6510/1089075520] CLIENT: Election thread has 71 egen
  [1307872771:130704] [6510/1194465600] CUSTOMER: from the election thread
  [1307872771:130733] [6510/1194465600] CLIENT: Start election Europe 2, ack 1, priority 100
  [1307872771:132922] [6510/1089075520] CLIENT: count VOTE1 [1] (2147483647, 71)
  [1307872771:132949] [6510/1089075520] CLIENT: accept the new vote
  [1307872771:132958] [6510/1089075520] CLIENT: count an election
  [1307872771:132973] [6510/1089075520] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, type vote1, LSN [21] [986728] nobuf
  [1307872771:132985] [6510/1194465600] CLIENT: fate of election thread
  [1307872771:133012] [6510/1089075520] CLIENT: count VOTE2 [0] (2147483647, 71)
  [1307872771:133037] [6510/1089075520] CLIENT: counted my vote 1
  [1307872771:133048] [6510/1089075520] CLIENT: jump phase2 waiting: already had 1 vote
  [1307872771:133060] [6510/1089075520] CLIENT: got enough votes to win. election of fact; Gen (prev) 70
  [1307872771:133071] [6510/1089075520] CLIENT: Election completed in 0.002367000 sec
  [1307872771:133084] [6510/1089075520] CLIENT: Election; Egen 72
  [1307872771:133111] [6510/1089075520] CLIENT: flag of election ending in 0, e_th 1, egen 72, 0x2a2c, e_fl, 0x0, lo_fl 0 x 6
  [1307872771:133170] [6510/1173485888] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [0] [0]
  [1307872771:133187] [6510/1173485888] CLIENT: Racing replication msg lockout, ignore the message.
  [1307872771:173744] [6510/1162996032] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote2, LSN [0] [0]
  [1307872771:173769] [6510/1162996032] CLIENT: Racing replication msg lockout, ignore the message.
  [1307872771:231593] [6510/1183975744] CLIENT: flag of election ending in 0, e_th 0, egen 72, 0x2a2c, e_fl, 0x0, lo_fl 0x1c
  [1307872771:231629] [6510/1183975744] CLIENT: fate of election thread
  [1307872777:443794] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307872971:644194] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307873165:844583] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307873360:44955] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307873554:245347] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307873748:445736] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307873942:646117] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  [1307874136:846509] [6510/1131526464] CLIENT: connect to 2.0.0.210:12345 site with result 115 init
  
  ... and stay infinite this situation
  
  
  
  My question is why the master is suddenly transformed into CUSTOMER and why he never returns to the MASTER
  
  
  
  Thanks in advance...
  
  
  
  Here is the log for the customer
  
  [1307872315:455113] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [984396]
  [1307872315:455134] [1282/1160603968] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [984483] perm
  [1307872315:609962] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [984733] perm
  [1307872315:764958] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [984986] perm
  [1307872315:919962] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985238] perm
  [1307872316:75018] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985491] perm
  [1307872316:229959] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985741] perm
  [1307872316:384949] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [985993] perm
  [1307872316:499899] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [986141] perm
  [1307872316:539895] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [986221]
  [1307872316:540078] [1282/1171093824] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [986307]
  [1307872316:540100] [1282/1160603968] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, Journal type, LSN [21] [986394] perm
  [1307872316:694950] [1282/1171093824] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type bulk_log, LSN [21] [986648] perm
  [1307872316:847349] [1282/1129134400] MASTER: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, Journal type, LSN [21] [946345]
  [1307872316:847698] [1282/1171093824] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, dupmaster, LSN type [0] [0]
  [1307872316:847999] [1282/1181583680] MASTER: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type newclient, LSN [0] [0]
  [1307872316:848168] [1282/1171093824] MASTER: rep_start: old version 17 journal found
  [1307872316:848222] [1282/1181583680] CLIENT: Racing replication msg lockout, ignore the message.
  [1307872316:848398] [1282/1171093824] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, type newclient, LSN [0] [0] nobuf
  [1307872316:848504] [1282/1192073536] CUSTOMER: from the election thread
  [1307872316:848542] [1282/1192073536] CLIENT: Start election Europe 2, ack 1, priority 100
  [1307872316:848566] [1282/1192073536] CLIENT: Election thread has 71 egen
  [1307872316:849634] [1282/1192073536] CLIENT: count VOTE1 [0] (2147483647, 71)
  [1307872316:849654] [1282/1192073536] CLIENT: count an election
  [1307872316:849680] [1282/1192073536] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid - 1, type vote1, LSN [21] [946437] nobuf
  [1307872316:851403] [1282/1160603968] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, type vote1, LSN [21] [986728]
  [1307872316:851448] [1282/1160603968] CLIENT: received vote1 egen egen 69, 71
  [1307872316:851470] [1282/1160603968] CLIENT: received the old vote egen 69, 71, ignoring vote1
  [1307872316:851481] [1282/1160603968] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [21] [986728] nobuf
  [1307872316:851538] [1282/1171093824] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 68 eid 0, master_req, LSN type [0] [0]
  [1307872316:851558] [1282/1171093824] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, living type, LSN [0] [0] nobuf
  [1307872316:854254] [1282/1160603968] CLIENT: / opt/bdb/rep_process_message: msgv = 5 logv 17 gen = 70 eid 0, type vote1, LSN [21] [986728]
  [1307872316:854275] [1282/1160603968] CLIENT: received vote1 egen egen 71, 71
  [1307872316:854317] [1282/1160603968] CLIENT: count VOTE1 [1] (0, 71)
  [1307872316:854339] [1282/1160603968] CLIENT: Vote Incoming: (eid) 0 (pri) 100 ELECTABLE (gen) 70 (egen) 71 [21,986728]
  [1307872316:854353] [1282/1160603968] CLIENT: Vote existing: (eid) 2147483647 (pri) 100 (gen) 70 (sites) 2 [21,946437]
  [1307872316:854369] [1282/1160603968] CLIENT: accept the new vote
  [1307872316:854379] [1282/1160603968] CLIENT: Election of phase 1 done
  [1307872316:854395] [1282/1160603968] CLIENT: vote for 0
  [1307872316:854407] [1282/1160603968] CLIENT: / opt/bdb/rep_send_message: msgv = 5 logv 17 gen = 70 eid 0, type vote2, LSN [0] [0] nobuf
  [1307872317:960344] [1282/1192073536] CLIENT: after the phase 2: votes 0, nvotes 1, Europe 2
  [1307872317:960389] [1282/1192073536] CLIENT: Election completed in 1.111809000 sec
  [1307872317:960401] [1282/1192073536] CLIENT: Election; Egen 72
  [1307872317:960412] [1282/1192073536] CLIENT: flag of completed election with-30974, e_th 0, egen 72, 0x282c, e_fl, 0x0, lo_fl 0x0
  Kill me!
  
  
  
  -my source
  
  on the master, I executed manually:
  
  txn_rate 1
  loop_rate 10
  loop 1 20000
  
  ------
  /*-
  * See the file LICENSE for redistribution information.
  *
  * Copyright (c) 2001-2010 Oracle and/or its affiliates. All rights reserved.
  *
  * $Id$
  */
  
  /*
  * In this application, specify us all communications via the command line. In
  * a real application, one would expect that the information on other sites
  * in the system would be maintained in a sort of configuration file. The
  * most of this interface, it is that we assume at the start that we can
  * knowledge
  (* 1) what is our environment home Berkeley DB,.
  (* 2) which host/port we want to hear about the connections. and
  (* 3) an optional list of other sites, we should try to connect to.
  *
  * These items of information are expressed by the following indicators.
  * h House (required; h means home directory)
  *-l host: port (required; l means local)
  * - C or - M (optional; will start as customer or master)
  * r - host: port (optional; r mean distance; no matter how many of them may be)
  * specified)
  * R - host: port (optional; R stands for the remote peer; only one of them can
  * to be specified)
  * - an all the | quorum (optional; a is synonymous with the ACK policy)
  * b (optional; b means in bulk)
  * Europe - n (optional, number of sites in the replication group; default is 0)
  * to try to dynamically calculate Europe)
  * priority Pei (optional; default is 100)
  * - v (optional; v means verbose)
  */
  
  #include < cstdlib >
  #include < a > cstring
  
  #include < iostream >
  #include < String >
  #include < sstream >
  
  #include < sys/types.h >
  #include < signal.h >
  
  
  #include < db_cxx.h >
  #include "RepConfigInfo.h".
  #include "dbc_auto.h".
  
  using std::cout;
  using std::cin;
  using std::cerr;
  using std::endl;
  using std::ends;
  using std::flush;
  using std::istream;
  using std::istringstream;
  using std::ostringstream;
  using std::string;
  using std::getline;
  
  #include < stdio.h >
  #include < readline/readline.h >
  #include < readline/history.h >
  
  #define CACHESIZE (10 * 1024 * 1024)
  #define of DATABASE 'quote.db '.
  #define «quote2.db» base2
  
  const char * progname = "excxx_repquote";
  
  #include < errno.h >
  #ifdef _WIN32
  #define WIN32_LEAN_AND_MEAN
  #include < windows.h >
  #define _snprintf snprintf
  #define sleep (s) sleep (1000 * (s))
  
  extern "C" {}
  extern int getopt (int, char * const *, const char *);
  extern char * optarg;
  }
  
  typedef HANDLE thread_t;
  typedef DWORD thread_exit_status_t;
  #define thread_create (thrp, attr, func, arg).
  (((* (thrp) = CreateThread (NULL, 0,-))))
  (LPTHREAD_START_ROUTINE) ((((func), (arg), 0, NULL)) == NULL)? (1: 0)
  #define thread_join (thr, statusp).
  ((WaitForSingleObject ((THR), Infinite) == WAIT_OBJECT_0) & & \)
  GetExitCodeThread ((thr), (LPDWORD) (statusp))? 0: - 1).
  #else / *! _WIN32 * /.
  #include < pthread.h >
  
  typedef pthread_t thread_t;
  typedef void * thread_exit_status_t;
  #define thread_create (thrp, attr, func, arg).
  pthread_create ((thrp), (attr), (func), (arg))
  #define (thr, statusp) thread_join pthread_join ((thr), (statusp))
  #endif
  
  Struct used to store information in the field of app_private Db.
  typedef struct {}
  bool app_finished;
  bool in_client_sync;
  bool is_master;
  bool no_dummy_wr;
  } APP_DATA.
  
  public static void log(const char *);
  void checkpoint_thread (Sub );
  void log_archive_thread (Sub );
  void dummy_write_thread (Sub );
  
  Class RepQuoteExample {}
  public:
  RepQuoteExample();
  void init (RepConfigInfo * config);
  void doloop();
  terminate() int;
  
  public static void event_callback (DbEnv * dbenv, u_int32_t, void * info);
  void print_stocks_size(Db *dbp);
  
  private:
  disable the copy constructor.
  RepQuoteExample(const RepQuoteExample &);
  void operator = (const RepQuoteExample &);
  
  internal data members.
  APP_DATA app_data.
  RepConfigInfo * app_config;
  DbEnv cur_env;
  thread_t ckp_thr;
  thread_t lga_thr;
  thread_t dmy_thr;
  
  private methods.
  void print_stocks(Db *dbp);
  void print_env(DbEnv *dbenv);
  
  prompt() Sub;
  };
  
  RepQuoteExample * g_runner = NULL;
  RepConfigInfo * g_config = NULL;
  
  Class DbHolder {}
  public:
  DbHolder ( env, const char _dbname DbEnv): env (env)
  {
  DBP = 0;
  If (_dbname) dbname = _dbname;
  else dbname = database;
  }
  
  {~ DbHolder()}
  try {}
  Close();
  } catch (...) {
  Ignore: this may mean that another exception is waiting
  }
  }
  
  bool ensure_open (bool creation) {}
  If (dbp)
  return (true);
  DBP = new Db (env, 0);
  
  u_int32_t flags = DB_AUTO_COMMIT;
  If (creation)
  flags | = DB_CREATE;
  try {}
  DBP-> open (NULL, NULL, DB_BTREE, DATABASE, flags, 0);
  DBP-> open (NULL, dbname, NULL, DB_BTREE, flags, 0);
  DBP-> open (NULL, NULL, dbname, DB_BTREE, flags, 0);
  return (true);
  } catch (DbDeadlockException e) {}
  } catch (DbRepHandleDeadException e) {}
  } catch (DbException e) {}
  If (e.get_errno () == DB_REP_LOCKOUT) {}
  Just fall through.
  } ElseIf (e.get_errno () == ENOENT & &! creation) {}
  Provide a little extra explanation.
  //
  Log ("Stock DB is not still exist");
  } else
  throw;
  }
  
  (All renewable errors pass here).
  //
  Log ("Please try again");
  Close();
  Return (false) End Function
  }
  
  {} void close()
  If {(dbp)
  try {}
  DBP-> close (0);
  Remove dbp;
  DBP = 0;
  } catch (...) {
  Remove dbp;
  DBP = 0;
  throw;
  }
  }
  }
  
  operator Db * () {}
  return of dbp;
  }
  
  DB * operator-> () {}
  return of dbp;
  }
  
  private:
  DB * dbp;
  DbEnv * env;
  const char * dbname;
  };
  
  Class StringDbt: public {Dbt
  public:
  #define GET_STRING_OK 0
  #define GET_STRING_INVALID_PARAM 1
  #define GET_STRING_SMALL_BUFFER 2
  #define GET_STRING_EMPTY_DATA 3
  int get_string (char * buf, size_t buf_len)
  {
  size_t copy_len;
  int ret = GET_STRING_OK;
  If (buf == NULL) {}
  ECRR < < "Invalid entry to get_string stamp" < < endl;
  Return GET_STRING_INVALID_PARAM;
  }
  
  Make sure that the string is null terminated.
  Memset (* buf, 0, buf_len);
  
  If there is no string, simply return.
  If (get_data() == NULL | get_size() == 0)
  Return GET_STRING_OK;
  
  If (get_size() > = buf_len) {}
  RET = GET_STRING_SMALL_BUFFER;
  copy_len = buf_len - 1; save room for a terminator.
  } else
  copy_len = get_size();
  memcpy (* buf, get_data(), copy_len);
  
  return ret;
  }
  size_t get_string_length()
  {
  If (get_size() == 0)
  return 0;
  Return strlen ((char *) get_data());
  }
  Sub set_string(char *string)
  {
  SET_DATA (String);
  set_Size ((u_int32_t) strlen (String));
  }
  
  StringDbt(char *string):
  DBT (string, (u_int32_t) strlen (string)) {};
  StringDbt(): Dbt() {};
  ~ StringDbt() {};
  
  Do not add additional data to this subcategory because we want to keep it
  compatible with objects Dbt created in-house by Berkeley DB.
  };
  
  DB * g_repquote = NULL;
  
  RepQuoteExample::RepQuoteExample(): app_config (0), cur_env (0) {}
  App_Data.app_finished = 0;
  App_Data.in_client_sync = 0;
  App_Data.is_master = 0; Suppose I have as a customer initially
  App_Data.no_dummy_wr = 0; prevent to run dummy writing
  }
  
  /*
  int (* old_rep_process_message)
  __P ((DB_ENV *, DBT *, DBT *, int, DB_LSN *));
  
  int my_rep_process_message __P ((DB_ENV DBT, arg1 , arg2, arg3, arg4 int, DB_LSN $arg5 DBT))
  {
  printf ("EZ-> > > my_rep_process_message:%p\n",arg5 ");
  old_rep_process_message (Arg1, Arg2, Arg3, Arg4, $arg5);
  }
  */
  
  void RepQuoteExample::init(RepConfigInfo *config) {}
  app_config = config;
  
  cur_env.set_app_private (& App_Data);
  cur_env.set_errfile (stderr);
  App_Data.no_dummy_wr = config-> no_dummy_wr;
  If (app_data.no_dummy_wr)
  printf ("no dummy! \n");
  
  EZ-> cur_env.set_errpfx (progname);
  cur_env.set_event_notify (event_callback);
  
  Configure the transfer block to send groups of documents to customers
  When a single network transfers. This is useful for sites of masters
  and customers participating in the synchronization from client to client.
  //
  If (app_config-> in bulk)
  cur_env.rep_set_config (DB_REP_CONF_BULK, 1);
  
  Set the total number of sites in the replication group.
  It is used by the treatment of election internal repmgr.
  //
  If (app_config-> totalsites > 0)
  cur_env.rep_set_nsites (app_config-> totalsites);
  
  Turn on the output of debugging and application information.
  If (app_config-> verbose)
  cur_env.set_verbose (DB_VERB_REPLICATION, 1);
  
  cur_env.set_verbose (DB_VERB_REPMGR_MISC, 1);
  cur_env.set_verbose (DB_VERB_RECOVERY, 1);
  cur_env.set_verbose (DB_VERB_REPLICATION, 1);
  cur_env.set_verbose (DB_VERB_REP_ELECT, 1);
  cur_env.set_verbose (DB_VERB_REP_LEASE, 1);
  cur_env.set_verbose (DB_VERB_REP_SYNC, 1);
  cur_env.set_verbose (DB_VERB_REPMGR_MISC, 1);
  
  Set the priority of replication for this environment group election.
  An election first selects the site with the most recent log
  documents such as the new master. If several sites are the most
  recent log records, the site with the highest priority value
  is selected as the master.
  //
  cur_env.rep_set_priority (app_config-> priority);
  
  Set the policy that determines how master and client sites
  treat the acknowledgment of replication messages required for
  permanent record. The default policy of "quorum" requires only
  a quorum of the likely to be elected peers sufficient to ensure a permanent
  record remains durable if the election is held. The option 'all '.
  requires that all clients to recognize a permanent replication
  message instead.
  //
  cur_env.repmgr_set_ack_policy (app_config-> ack_policy);
  
  Set the threshold for the minimum and maximum of the client time
  wait before asking the retransmission of a missing message.
  These core values on the characteristics of performance and load
  host master and client as well as the tower platforms
  message trigger time.
  //
  cur_env.rep_set_request (20000, 500000);
  
  Configure the detection of blockages to ensure that blockages of locks?
  are broken by the presence of one of the queries of locks in conflict
  has rejected. DB_LOCK_DEFAULT uses the specified lock strategy
  at the time of the creation environment or DB_LOCK_RANDOM if none has been
  specified.
  //
  cur_env.set_lk_detect (DB_LOCK_DEFAULT);
  
  The following features of the basic replication can also be useful to your
  request. See Berkeley DB documentation for more details.
  -Master leases: strict consistency for data reads
  on a main site.
  -Delivery time: Customize the amount of time that waiting for Berkeley DB
  for such things as the election must be concluded or a master
  lease to be granted.
  -Client synchronization delay: managing the main site
  resources by spreading intensive customer resources
  synchronizations.
  -Blocked customer operations: return immediately with an error
  rather than wait indefinitely if a customer is operation
  blocked by a current client synchronization.
  
  cur_env.repmgr_set_local_site (app_config-> this_host.host,
  app_config-> this_host.port, 0);
  
  for (REP_HOST_INFO * cur = app_config-> other_hosts; cur! = NULL;)
  Cur = cur-> next) {}
  cur_env.repmgr_add_remote_site (cur-> host, cur-> port,
  NULL, cur-> peers? DB_REPMGR_PEER: 0);
  }
  
  Configure heartbeat timeouts so that repmgr monitors the
  health of the TCP connection. Master sites disseminate a heartbeat
  at the frequency specified by the timeout DB_REP_HEARTBEAT_SEND.
  Customer sites waiting for activity of the messages of the length of the
  DB_REP_HEARTBEAT_MONITOR timeout before concluding that the
  connection to the master is lost. The DB_REP_HEARTBEAT_MONITOR
  timeout must be longer than the time-out DB_REP_HEARTBEAT_SEND.
  //
  cur_env.rep_set_timeout (DB_REP_HEARTBEAT_SEND, 5000000);
  cur_env.rep_set_timeout (DB_REP_HEARTBEAT_MONITOR, 10000000);
  
  The following features of repmgr can also be useful to your
  request. See Berkeley DB documentation for more details.
  -Regulates two sites of strict majority - in a two-site replication
  the group, to ask the two sites are available to elect a new
  master.
  -Timeout - customize the amount of time repmgr awaits
  for things as pending or try thanks
  to reconnect to other sites.
  -The site list - returns a list of currently known sites at repmgr.
  
  Now we can open our environment, although we are not ready to
  start replication. However, we want to have a dbenv autour
  so that we can send it in one of our message handlers.
  //
  cur_env.set_CacheSize (0, CACHESIZE, 0);
  cur_env.set_flags (DB_REP_PERMANENT, 1);
  cur_env.set_flags (DB_TXN_WRITE_NOSYNC, 1);
  
  / * u_int32_t maxlocks = 300000;
  If (maxlocks! = 0)
  cur_env.set_lk_max_locks (MAXLOCKS);
  
  u_int32_t maxlocks_o = 300000;
  If (maxlocks_o! = 0)
  cur_env.set_lk_max_objects (maxlocks_o);
  
  u_int32_t maxmutex = 300000;
  If (maxmutex! = 0)
  cur_env.mutex_set_max (maxmutex);
  */
  
  DbEnv * m_env = & cur_env;
  m_env-> set_flags (DB_TXN_NOSYNC, 1);
  m_env-> set_lk_max_lockers (60000);
  m_env-> set_lk_max_objects (60000);
  m_env-> set_lk_max_locks (60000);
  m_env-> set_tx_max (60000);
  
  m_env-> repmgr_set_ack_policy (DB_REPMGR_ACKS_NONE);
  
  m_env-> rep_set_timeout (DB_REP_ACK_TIMEOUT, 50 * 1000); 50ms
  m_env-> rep_set_timeout (DB_REP_CHECKPOINT_DELAY, 0);
  m_env-> rep_set_timeout (DB_REP_CONNECTION_RETRY, 30 * 1000 * 1000); 30 seconds
  m_env-> rep_set_timeout (DB_REP_ELECTION_TIMEOUT, 1 * 1000 * 1000); 5 seconds
  m_env-> rep_set_timeout (DB_REP_FULL_ELECTION_TIMEOUT, 5 * 1000 * 1000); 5 seconds
  m_env-> rep_set_timeout (DB_REP_CONNECTION_RETRY, 5 * 1000 * 1000);
  m_env-> rep_set_timeout (DB_REP_ELECTION_RETRY, 10 * 1000 * 1000); 10 seconds
  
  m_env-> rep_set_timeout (DB_REP_HEARTBEAT_MONITOR, 80 * 1000 * 1000); 80 seconds
  m_env-> rep_set_timeout (DB_REP_HEARTBEAT_SEND, 500 * 1000); 500 milliseconds
  
  The minimum number of microseconds that a client will wait before requesting a retransmission
  u_int32_t rep_req_min = 40000; 40 000 microsec = 40 mili
  The maximum number of milliseconds that a client will wait before requesting a retransmission
  u_int32_t rep_req_max = 1280000. / / 1 280 000 microsec = 1.28 sec
  
  u_int32_t rep_limit_gbytes = 0;
  u_int32_t rep_limit_bytes = 100 * 1024 * 1024; 100 MB
  m_env-> rep_set_request (rep_req_min, rep_req_max);
  m_env-> rep_set_limit (rep_limit_gbytes, rep_limit_bytes);
  
  
  cur_env. Open (app_config-> homepage, DB_CREATE |) DB_RECOVER |
  DB_THREAD | DB_INIT_REP | DB_INIT_LOCK | DB_INIT_LOG |
  DB_INIT_MPOOL | DB_INIT_TXN, 0);
  
  keep the old string function
  old_rep_process_message = cur_env.get_DB_ENV ()-> rep_process_message;
  deviant
  cur_env.get_DB_ENV ()-> rep_process_message = my_rep_process_message;
  
  / * int _i;
  cur_env.log_get_config (DB_LOG_DIRECT & _i); printf ("DB_LOG_DIRECT = %d\n",_i);
  cur_env.log_get_config (DB_LOG_DSYNC & _i); printf ("DB_LOG_DSYNC = %d\n",_i);
  cur_env.log_get_config (DB_LOG_AUTO_REMOVE & _i); printf ("DB_LOG_AUTO_REMOVE = %d\n",_i);
  cur_env.log_get_config (DB_LOG_IN_MEMORY & _i); printf ("DB_LOG_IN_MEMORY = %d\n",_i);
  cur_env.log_get_config (DB_LOG_ZERO & _i); printf ("DB_LOG_ZERO = %d\n",_i);
  */
  
  Start checkpoint and newspaper archive support threads.
  (void) thread_create (& ckp_thr, NULL, checkpoint_thread, & cur_env);
  (void) thread_create (& lga_thr, NULL, log_archive_thread, & cur_env);
  (void) thread_create (& dmy_thr, NULL, dummy_write_thread, & cur_env);
  
  cur_env.repmgr_start (3, app_config-> start_policy);
  }

  The detailed output shows that the site has won the election and the
  RepMgr code calls rep_start to become the master, but he is stuck
  waiting for a txn or a cursor to be resolved before this change of State
  may occur. I have not studied your application code. But if you have a
  cursor or txn, underway at the time, then you must resolve before
  the site may change the State.

  If you can reproduce this, it would be useful to see the stack traces
  the threads. That could confirm or deny that, in my view, I see.

  Sue LoVerso
  Oracle

• High CPU use/Slow Performance after you install the updates of Windows

  I run Vista Business 32-bit.

  After you install many Windows updates in the last few days, I've known very slow performance after the system worked for a while. Resource monitor shows 70-100% CPU usage, even when you run all the apps (that I know of). This makes everyhting grind to a halt, same trip that the mouse jerky movements. I ran several complete system with McAfee anti virus scans and not found problems (using the latest software). The detail showed the so-called ", PID4 NT kernel and system" using 18% avialable CPU capacity, but this process is not always shown to use much more capacity when the slow performance occurs. Nothing else don't use much capacity CPU, I see.

  More recently, the capacity of the CPU became crazy, jumping from zero to 100% usage in a back a suite oscillation. When I shut down and restart, performance improves, but erodes little by little over time.

  Is this a sign of a virus, or is it a problem with the recent Windows updates or some kind of conflict with my software such as McAfee? How do I tell me what to do? Anyone else have this problem with the recent Windows updates?

  Help!  Thank you!!

  McAfee applications (and Norton) are known for not not upgrade (or uninstalling) itself.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. now run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  NOTE: Step #2 McAfee fix run the removal tool, you have already downloaded in my step #1 above.

  4 IMPORTANT! => After the reinstallation of the McAfee application (step #3 of the McAfee fix), manually & repeatedly updated the McAfee application, until you get a prompt "no update more".

  5. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  6. OPTIONAL: For good measure, pen also Internet Explore (only) to http://support.microsoft.com/kb/971058 & race that secure it in DEFAULT and modes and AGGRESSIVE. [1]

  7 restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems with sidebar after logon

  Hello

  We use the Windows with Windows Server 2008 Std R2 DC field. We currently have several offices of Vista that belong to the domain. DNS is configured as suggested by Ms. recommended and there is no other group policy in use than the default domain policy.

  After logon successful sidebar does'nt load completely (sidebar is displayed, but the clock is not displayed). Also, if you try to start Office MS Word it stuck in the loading screen. If you don't expect anything happens. Strange thing is that all other programs will be load normally (even other Office programs), but Word and Sidebar are stuck.

  All this happens completely random. You can open a successful session of 3 times, but then it happens again.

  This problem came just after computers, where joined to the domain. The proglem didn't happen while that computers in the workgroup.

  No idea what could be wrong?

  Please repost your question to the Discussion Windows Server group to: http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.windows.server.general&cat=en_US_9741c575-ec92-42f8-85ba-00dfe1483cf5&lang=en&cr=US where the Windows Server experts will be happy to help you.  The fact that the Vista machines worked are in a working group suggests that the probllem is from the domain which means from the server.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• After updating, my .muse files take an extraordinary amount of time to open.

  Yesterday after a repair with support for a few hours the file began open in a reasonable amount of time. Everything worked normally through last night (although I don't think that anything was actually fixed/changed during the support session).

  Now back to the drawing board. It is not only a file, but a large number of files I have. They are larger around 800 MB. But this has never been a problem before the update.

  Adobe, thank you for the update! Any ideas out there? / Anyone else?

  I reinstalled the program and everything works well again. I don't know why I don't think of this first.

• Flash animations stop after a random time

  The problem I encounter is that the flash movie files (each site) play for a moment or two, then will stop with little "loading" symbol turning constantly in the center of the screen. Flash movies used to work without problem, but in recent months, she went from does not to doesn't work do not at all. to a perhaps related problem sometimes downloads stop after a certain period of time and also seem to "hang on" to a random location. If I pause and then charging that restart the program or anything that will usually complete the download. It doesn't happen often but it happens. The flash animation, however, thing every time - no matter what browser I've tried. (Firefox, IE, IE with no Add-ons and Chrome in any case.)

  I tried the solutions I've found all over the internet, including Adobe and Microsoft forums, nothing helps. I unloaded flash with the Adobe uninstaller and reloaded flash. I tried different versions of flash - with and without a firewall on. I made sure I use the 32-bit version of Internet Explorer and even tried to run in "Administrator" mode. I've updated all the drivers that I can upgrade. I used a check of the register as a last resort. I even used the Dell partition to return my computer to the condition it was when I bought it and that has not changed anything either.

  Everything I've tried has made zero difference. In the hope that someone will have another idea for me to try, I put all the stats of my computer that I can think of below.

  Qwest internet operating at 20mbps

  Flash 10.1.102.64

  Shockwave 11.5.9.615

  Microsoft Security Essentials

  Tried both IE 9, IE with no Add-ons, and now have IE 8 when I restored it the image of the partition

  Name of the OS Microsoft Windows 7 Home Premium

  Version 6.1.7600 Build 7600

  System manufacturer Dell Inc.

  System model Inspiron 560

  Type of system PC x 64

  Processor Intel (r) Core (TM) 2 Duo CPU E7500 2.93 GHz, 2936 Mhz, 2 Lossnay, 2 logical processors

  Graphics - Intel G45/G43 Express Chipset

  -Realtek High Definition Audio sound

  Version of the BIOS/Date A00 Dell Inc., 06/10/2009

  SMBIOS Version 2.6

  Layer of HAL Version = "6.1.7600.16385".

  Physical memory (RAM) installed GB 8.00

  Total physical memory 7.96 GB

  Available physical memory 6.94 GB

  Total virtual memory 15.9 GB

  Available virtual memory 14.4 GB

  File of the page space 7.96 GB

  Hi, thanks for the info of Kill bits. I think an uninstallation/installation may be in order. However, I not to do this use the router, unplug it and use the modem directly.

  Use the administrator account.

  Download and SAVE to your desktop, the uninstall program:

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Download and SAVE to your desktop, the installation program to use IE installer EXE

  http://www.Adobe.com/products/flashplayer/fp_distribution3.html

  Close all the browser windows, you do not want to look on your desktop.

  Disable Messenger services, like yahoo, msn, etc. in the tray (area near the clock)

  Launch the uninstaller and when you are done, Reboot (restart) your computer.

  Run the installer for IE, run Setup for FF and when you're finished, restart.

  Then go to this site and test:

  http://www.Adobe.com/software/Flash/about/

  You can print these instructions to make it easier to follow. If you have any questions, let me know.

  I hope that since so many changes have been made, that a clean uninstallation/installation can run.

  And if he does so before using the router, that would be a problem. The Qwest ISP cannot be ruled out, but if you still have the problem after that, so needs.

  Thank you

  eidnolb

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Problem with Safari, after update

  I use a MacBook Pro, OS X Yosemite, 10.10.5 - and after the last update, I have problems with Safari (version 9.1). Some Web pages I visit every day is more responsible (I get the message that the page needs to be recharged because she failed the first time, but this does not work then either). This problem started just after the last update. Does anyone else have this problem? What I have to go back to the previous version or can I fix this problem?

  If you have problems to open Web pages, take a look at these techniques proposed by Apple of troubleshooting.

  https://support.Apple.com/en-us/HT204098

  Go to the Safari menu (at the top right of your screen next to the Apple icon), choose 'Quit Safari'

  Press the "Shift" key and while holding this button on your unique keyboard, click the icon of Safari on your Dock.

  Open Safari - Preferences - Privacy - data to remove any Web site.

  Open the menu to go with the Option (Alt) key - library - key locate Safari folder and place it on your desktop. Restart your Mac, open Safari and delete the file from your desktop.

  Also, try the following steps:

  Restart your Mac.

  Try to start:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once your Mac boot, restart dhcpd as you usually do.

  If this does not help, follow the instructions below:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• Problems with WiFi after put 10.11.2 up-to-date.

  Mid 2011 iMac.  Problems with WiFi after put 10.11.2 up-to-date.  No associated network.  Everything was fine before the update. All the pre 10.11.2 device works fine.  Anyone else having issues?  I have to disconnect and reconnect manually.  WiFi drops every 5 to 10 minutes.  Nothing has changed on the machine something of the update.

  Please do not comment on the age of the system.  Achieve a Mid 2011 arrived at a possible replacement point.  I have many other new Mac at home.  The Mid 2011 is spec'd with 16 GB of RAM, i7 and SSD.  It's always very fast.

  Thank you in advance for the answer...

  Hi Captainsniz

  There are a few things to try. Keep doing this until the problem disappears.

  First of all, if you have not already, shut down the computer completely, wait about 1 minute, then restart.

  Disconnect the wifi network either via system preferences, either by pressing the "Option" key and clicking on the wifi menu bar icon.

  Reset the DHCP lease by going to system preferences > network and show Advanced Options, and then click the button to "Renew the DHCP lease" TCP/IP tab.

  You can delete the wifi network of system preferences > network > network name... then close system preferences. Then reopen and add the network in.

  You can also restart your wifi router, it erases the old connections. Most of the routers you just turn off and wait a few minutes, then restart. You can also reset your ISP modem if you have a.

  Finally, you can try to reset the PRAM and SMC on your Mac. I'll get this info here on Apple Support KBs for your particular Mac.

  Be sure to back up your computer.

  Hope this helps, Greg

• Problem with SP1 after reinstall clean Vista

  I did a "clean and reinstall" on Vista 32 bit Home Premium machine due to problems of registry after a "System Mechanic" install.  The reinstallation of Vista went well so I started to download and install all updates for the computer.   Everything downloaded and installed fine until I got to SP1 (KB 936330).  Windows Update tells me that the installation was successful, but when I click with the left button on computer then check properties that SP1 does not appear in the description "windows edition".  I installed the update several times and get the same results.  Windows updates always tells me to install the same update (SP1) and when I look through the history it States successfully 4 times.  When I look at control panel-programs-uninstall a program - and discovers a part of the update uninstall, update SP1 is not listed.   I missed something?  Help, please.

  Hello

  You did changes to the computer before the show?

  I suggest you try the remaining steps in the following link:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

• Problems of performance due to Firewall on Windows 7

  So I did a little one of research related to my problem and I could not find anything that describes directly and that solved my problem, so I decided to make my own question in the hope of a response.

  To put it simply, my computer works very well even though it's about 4 years, with processor i3 and windows 7.

  I recently turned off my windows firewall and I noticed that, as a result, my computer runs one * of a lot slower. Internet browsers take ages to load, customer game take forever to start up, some of it real-world applications such as windows media player has stopped working properly and worse yet - I can't turn on my firewall.

  When I go into control panel - Windows Firewall - security, it arrives with just loading icon and will not actually go into the firewall options. There for several hours in the hope that it will only charge in, but he just finally towards the top with the Windows Firewall does not. This happened once before and after a long period of time, about a month, I was able to load in for some reason any and was able to re - turn my firewall. I have Avast Antivirus my Antivirus application.

  I disabled my firewall is because I read that I might have to do to install Google Chrome if it does not work by conventional means, as I had trouble downloading it. But by disabling the firewall did not help and didn't just my computer. Does anyone know why this might be happening?

  First thing I would check is Avast.  He has no doubt his own firewall and when it installs it can close the Windows Firewall.

  Try to remove Avast.  Then see if the problem goes away.

  I worked on client computers for years.   I discovered many years ago that 'security' systems that are a set of applications that include antivirus do diagnose difficult problems because they see the diagnosis as a threat.  So my rule is that I will not work on a computer with installed until I remove.

  I recommend only for pure antivirus programs.  There are several available on the market.

  Another rule: NEVER have more than one installed security solution.  They come into conflict with one another.  You have other protection software installed?

  Another suggestion: Run System File Checker

  1. Beginning
  2. All programs
  3. Various
  4. Right-click on command prompt and choose Run as administrator
  5. In the box, type sfc/scannow

• Problems with laptop after uninstalling Windows 10

  I like others had the free update and had nothing else of grief.  Given that I uninstalled my computer crashes when you try to go between different windows.  Can not defragment as it says 'she runs on another program' help!

  Hello

  I suggest you try to reboot the PC once and check if it helps.

  We will follow these methods and check if it helps:

  Method 1:

   

  You can try to clean boot in order to check whether a third-party software is causing a problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7.
  http://support.Microsoft.com/kb/929135

  Note: Don't forget to reset the computer to start as usual, once the problem is resolved. Follow step 7 of the KB article.

  Method 2:

  I also suggest you optimize Windows 7 for better performance and check if that helps.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Hope this helps,