Problems of tethered shooting captures with 4.4 Lightroom using Nikon D7000.

Similar Questions

• Tethered shooting with aan a500L

  Can I get attached with a Sony a500l and if so, do I need and how can I do?

  The camera has a HDMI OUT Jack, which allows you to install an HDMI cable to a monitor / TV. In this way, you can see that you take a picture on a bigger screen when the camera is in live view. You can also connect the camera to a computer with a HDMI IN port, and you can do tethered shooting using a streaming / visualization software.

  If my post answered your question, please mark it as "accept as a Solution.

• Tetherred shooting with the Canon EOS 5 d or 6 d in creative cloud

  In fact, I have two questions in one. First of all, I own a 5 d, first model (called 5 d mark I by some), and it seems to be supported in Lightroom for shooting as indicated herein captive:a list of cameras that can be attached to Lightroom.

  But when I turn on my 5 d and begin shooting tethered in Lightroom CC, the display alternates between showing a message that my camera is detected or there is no camera detected. At the same time, my camera says 'busy' all the time.

  So it seems that 5 d is not supported after all (I tried to change the setting of PC Connect on the menu, but which does not work either). This is why it is supported by CC or not?

  Then, I thought to buy a 6 d, since it's a newer model, but this model works in tethered shooting in Lightroom CC?

  Confusion in abundance... any of you have an answer, that will help me out this dark maze ?

  I guess you look at this documentation from Adobe.

  A list of cameras that can be attached to Lightroom.

  I also have a 5Dclassic.   Even if shows that the 5 d classic is supported for Lr 3.0 as the camera is not attached with Lr 6 because of the Canon SDK.  This documentation page to view a LOT more information about the time in favour of home fell for a camera, but they pulled this info so that the page is now UNNECESSARY.

  The 6 d is listed as supported in Lr6

• I installed el capitan and my Nikon d4 won't tie up even with the LR 6.2.1 update. I read that it is a major problem for those of us who shoot professionally with this faculty. Is this ongoing development, and if so how hard is it going to be released?

  I installed el capitan and my d4 & d800 Nikon won't tie up even with the LR 6.2.1 update. I read that it is a major problem for those of us who shoot professionally with this faculty. Is this ongoing development, and if so how hard is it going to be released?

  Too late to not upgrade to El Capitan and my tech guy told me about 4 hours to remove the OS on. Unfortunately missed the chatter on the beta version. As I have the LR 6 disc version I guess that this fix will come out at the same time as CC?

• Tethered shooting in Lightroom CC with a Canon 5 d is not

  Tethered shooting in Lightroom CC with a Canon 5 d is not

  The 5 d is not in the list of devices that support Adobe, anyone know if this will change anytime soon, or do I need another program?

  
  Thanks, Mathijs

  It will probably be there soon because it generally takes up to 6 months, in the meantime you can use the Canon EOS Utility (v3. (XX) and a control in Lightroom folder.

• Tethered Shooting with Nikon does not record on CF/SD cards

  5 Lightroom now has a solution for the tethered shooting with Nikon where no recording on CF/SD cards takes place?

  If this isn't the case, that will be covered in the future?

  I have a vague memory that this was caused by the Nikon SDK, not Lightroom.

• I have problems when I shoot in raw + jpeg. RAW files seem corrupted!

  I have problems when I shoot in raw + jpeg.  It seems that the raw files get corrupted.  I shot raw without a problem.  It's only when I shoot in raw + jpeg.  Raw files will not appear in Photoshop elements.  I installed the Canon software and could see all the raw files; However, I noticed that when I tried to post some full screen they would not show.  I also noticed that these block-ish look raw files.  They appear more digital research.   Is there a specail required in RAW + jpeg map?  I formatted ones I have before their use.

  Thank you all for watching my post.  I shoot with a 60 d using Photoshop Elements 10.  Finally, I called Canon tech support and found out it was the card reader that was causing problems.  When I used another card reader, I was able to transfer the Jpeg and raw files.  They advised me to connect the camara to the computer to transfer files.  I learned to use a card reader and have for years.  It was the first time, it caused me problems.

• 5 Lightroom import not shooting information with JPEG files

  When I shoot in raw 5 Lightroom doesn't have no problem importing my shooting information.  I try the super fine jpeg on an Olympus MDGs em 10 mark ii.  Lightroom matter very good photos, but there is no shooting of information that accompanies the photos.  Anyone know of a fix?  Thank you.

  Triple-check that you do not have an import of metadata preset active.  In the import window, right column, under apply during import, make sure that metadata are set to None before importing JPEG files:

  

  If this does not help, please download a JPEG sample directly from the camera (not imported by LR) card to Dropbox or similar and post the link here. We will check that indeed the EXIF metadata that are compatible with LR 5.

• Capture with premiere pro cs6

  Hallo,

  I use first pro cs6.

  My problem is the DV capture,

  Because my JVC GY-HD101 camera work with miniDV en I use to capture Panasinic NV-GS500

  Capture programs that work smoothly with premiere pro?

  Thank you

  It is a known issues with capture on the latest version of CS6.

  Return to 6.0.3.

• Can I capture with Final Cut Pro and edit in Premiere Pro?

  Because it appears first has problems with capture - at least for me, but as I see it for others as well - and I can capture with iMovie, I take it with Final Cut Pro for capture - cross for Adobe Premiere and the suite for editing, then finalized? Or is it a problem to copy the photos/files from one program to the other (they would be clearly identified if I could just import first shots later?)

  Thank you

  Rob

  Hi Rob,

  When you are capturing HDV into FCP, it creates a specific Apple HDV codec. It is a codec that is not available unless the FCC, movement or compressor is installed.

  Two solutions of workaround would be to use Premiere Pro on Mac with above mentioned applications on the same system or convert a codec which can be read in first.

  Best,

  Peter Garaway

  Adobe

  First pro

• [Consolidation locked] Windows 8 and Lightroom 4.2 tethered shooting

  Hello

  I'm used to shoot attached with my Canon 5 d MarkII in Lightroom 4.2 under Windows 7. I have recently installed Windows 8, but now Lightroom can not detect my Canon 5 d Mark II more. The problem is that Lightroom is using an older version of Framenetwork (3.5) and in the Windows version 8 (4.5) is built. It is possible to download and install this version (3.5) in Windows 8, but lightroom still cannot detect my camera. Does anyone have the same issue or better an answer for this problem? Thanks in advance!

  Title of the message was edited by: Brett N

  See:

  Canon 5 d is no longer supported in attached LR4.2

• First Pro CS5 does not not after 55 minutes of capture with intensity shuttle

  Hi and thanks for the valuable resources on this forum.

  I'm analog video capture in first Pro CS5 it using the shuttle Blackmagic intensity (with corrector time basis in the path of the video).  My shots are stopped at 54 or 55 minutes when the computer becomes inadmissible.  What happened with the codec Blackmagic movement as well as jpeg YUV 10 bit capture. Same thing if I capture with express media (blackmagic capture software)

  I tweaked my system according to the many recommendations in the forum.

  Running CS5 5.03, backup 10 minutes automatic (same problem without automatic recording or automatic check in at 20 minutes)

  Windows 7 64 bit fully up-to-date

  I7 - 930 cpu

  Gigabyte x58A - UDP5 (revision 1)

  24 GB Ram

  NVIDIA 470 - MSI twin Frozr cooling solution.

  Restore off, windows search indexing

  Followed advice from the forum and Viper about optimization system

  3 hard drives

  System on standard Sata 2 drive

  The capture of SSD drive from OCZ Vertex 3 120 g (beautiful piece of gear) of the project currently running on the Sata 3 controller

  Pagefile on another hard drive

  Uninstalled Norton 360

  Anything else I could find uninstalled or disabled.

  Firmware and latest drivers for USB of the Station pilot as recommended by Blackmagic.

  Capture of the very successful things less than 55 minutes, but I have things any longer I would like to capture at once.

  I used process Explorer to watch what is happening.  Nothing special that I can identify in terms of process, but cpu seems to be 100%.

  With the progressive settings problems remain the same.

  I'm not aware of any limit of size of file with Premiere Pro or Blackmagic - is there some?

  Whereas reinstall but would be grateful to all points of view.  My first post so I hope that I have provided good info to help me help you.

  Thank you

  Andrew

  As happens with the BM software as body, I will GUESS that the problem is with the pilot BM device that links software appliance

  I would check to see if they have a difficulty with BM

• I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not remove or add the program.

  I had a problem with slow, so I used "reset". The popup ran forever so I stopped it. Now I can not use, remove or add the program. How should I proceed?

  TIA,
  BWSwede

  Try to create a new profile.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

  What problems do you have that you want to reset Firefox?

  Firefox creates a new folder of old data of Firefox on the desktop?

  If reset you Firefox and a new profile is created and some of your data (bookmarks, passwords, cookies, form data) is automatically imported and your current profile will be moved on the desktop (old data of Firefox).

• Re: Problems with Microphone when I use Skype

  Could anyone help with the problems I am experiencing with the microphone when using Skype?
  I also tried to use an external, but still problems with the other person can't hear me, y at - it a setting I can adjust its been to Toshiba and they said that there is no fault.

  Any help would be appreciated.

  In fact internal mic works well with Skype.
  All you need to do is enter the sound options of Skype and check the settings there especially if you use the headset.
  Play around with these settings.

• 1065984 error during installation or capture with sp4 4.6 HPDM

  Hello

  Yesterday, I did the update to sp3 HPDM 4.5 to 4.6 sp4.

  Now, I can not install image of wes or capture on my computer thinclient t5740e.

  Can I install the update agent, the agent is the last (4.6.3660.21244).

  This newspaper to install and capture (with the french):

  Install:

  2014-11-13 14:08 mapping of the repository to: master repository
  2014-11-13 14:08 sent the job to the managed devices management gateway
  2014-11-13 14:08:04 the task has been retrieved by the agent.
  2014-11-13 14:09:09 [error code: {0}] [Module: {1}] [category: {2}]
  2014-11-13 14:09:09 [error details]: \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\wins\ImageTask_XPE.cpp@286: cannot download the image customer kit.
  \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\common\ImageCommon.cpp@601: cannot download the image map file, file name: toolsConfig.xml
  \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\common\ImageCommon.cpp@560: cannot download the mapping file.
  .\port_layer\ftpclient\fileclient.cpp@179: could not get the remote file LocalDir:C:\,RemoteDir:\\172.22.22.86\Repository/Repository/Tools/Imaging/Mapping,Name:toolsConfig.xml
  .\port_layer\ftpclient\ShareFolderClient.cpp@442: could not get the size of dir.
  .\port_layer\file_io\dirfuncs.cpp@845: failed to get the data from the file.
  .\port_layer\file_io\filefuncs.cpp@86: could not get the data of the file & colon;\\172.22.22.86\Repository/Repository/Tools/Imaging/Mapping\toolsConfig.xml
  .\port_layer\file_io\filefuncs.cpp@84: the specified path is not found.
  2014-11-13 14:09:09 failed to run the common task.

  Capture:

  2014-11-13 16:21:43 sent the job to the managed devices management gateway
  2014-11-13 16:21:47 the task has been retrieved by the agent.
  2014-11-13 16:22:51 [code error: {0}] [Module: {1}] [category: {2}]
  2014-11-13 16:22:51 [error details]: \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\wins\ImageTask_XPE.cpp@118: cannot download the customer kit.
  \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\common\ImageCommon.cpp@601: cannot download the image map file, file name: toolsConfig.xml
  \Ndm\branches\Release_4.6.4\Source\Cpp\Agents\Core\Task\common\ImageCommon.cpp@560: cannot download the mapping file.
  .\port_layer\ftpclient\fileclient.cpp@179: could not get the remote file LocalDir:C:\,RemoteDir:\\172.22.22.86\Repository/Repository/Tools/Imaging/Mapping,Name:toolsConfig.xml
  .\port_layer\ftpclient\ShareFolderClient.cpp@442: could not get the size of dir.
  .\port_layer\file_io\dirfuncs.cpp@845: failed to get the data from the file.
  .\port_layer\file_io\filefuncs.cpp@86: could not get the data of the file & colon;\\172.22.22.86\Repository/Repository/Tools/Imaging/Mapping\toolsConfig.xml
  .\port_layer\file_io\filefuncs.cpp@84: the specified path is not found.
  2014-11-13 16:22:51 cannot run the common task.

  Please, help me! I don't know what I can do.

  Best regards.

  It seems that the shared folder was not well configured.

  Could you please download the controller.conf under masterrepository folder and take a screenshot of the master repository configuration dialog box?