Problems of the JAD and COD file

Similar Questions

• Eclipse create .jad and .cod files

  According to the documentation I've seen, OTA installation from a Web site is to place the files application.jad and application.cod on a server to direct the BlackBerry device to this location.  My preliminary test indicate that it works as advertised.

  However, I find that Eclipse creates an application.jad file that references a request file - 1.cod, but at the same time only creates the file application.cod.  Of course, when the device will the url and inspects the .jad file, it tries to find the file application - 1.cod!

  What is causing this to happen and how I fix without manually open the .jad file and inspect everything I want to publish?

  Thank you

  Ouch!

  I looked at me directory and of course, the cod file was more than 64K.  If you tell me that once it is greater than 64K isn't really a cod file, but in fact a zip file?  To deploy, I need to decompress the file and place the actual cod files in my site url?

  I was skeptical, but it seems to be as you described.

  Thank you for sharing this tidbit.

• The long text of the chain and cod file size

  In my application, I have a few static string constants that are very long. Channels will be displayed on the screen when it is administered buttons are clicked. I find that once I added these chains, cod file size has increased by 30%, which is not desirable. I expect buttons will rarely be clicked but I must have these text for display.

  Is there a better way to manage these channels so that they do not swell the cod file, for example, compress them.

  Thanks in advance.

  If you put the strings in a separate resource file as BBDeveloper suggests, you can also run them with maximum compression gzip before you add them to the project. Then after opening the file (with getResourceAsStream), wrap the input in a GZIPInputStream stream before reading.

• How to make a jad file and cod file to a single file for hosting on the web server

  Hello

  I want to make the jad file and cod file is a single file, which must be installed in the blackberry.

  When I load the jad without cod file file, it loads the app

  but when I load the jad file cod file, it loads the application on the blackberry device.

  I only want a single file to be uplaoded to the server for the installation of the application.

  Help, please

  I want it to install the web server to the BlackBerry smartphone.

  Thanks and greetings

  Anthony singh

  This is not possible, that both jad and cod is necessary to install an OTA application. the jad file contains a description of the application, the cod is the real application.

• Is it possible to provide our db and files jad or cod file?

  Hi all

  Is it possible to provide our db as well as our app i.e. file file jad or COD files so that our application can retrieve data from the database or inserted into the db etc.?

  Thank you

  Sanath

  To create/display/change your can find a lot of customers, for example Sqlite Admnistrator, Sqliteman,...

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  What password? You can change a password for the account, but if you do not know the FileVault password, you are in a bind. You need to call Apple directly if you their sent an emergency password when configuring the FV.

  For a user account:

  You forgot your password

  Lion or later version

  Reset a password in Mac OS X 10.7 Lion

  OS X Lion mountain - reset a login password,

  OS X Mavericks-solve password problems,.

  OS X Lion-Apple ID can be used to reset your password for the user account.

• Executable cannot find the custom error code file

  I'm building a LabVIEW 2013 application on a Windows 7 computer and deploying it to a Windows XP computer. My application has a custom error code file, stored in -- errors.txt, but my executable on the Windows XP machine can't find the custom error file and returns only the string of appeal for all errors that occur.

  When you use is not an installer, I tried to copy the error code at all locations listed here: http://digital.ni.com/public.nsf/allkb/6077DBEDA4F9FEE3862571F600449501 but the application still does not load the custom errors. I have the box checked to "Error Codes customized Include" in the construction specifications.

  When an executable of construction and the development of Windows 7 to XP, where do I put the custom error code file? It is found in Program Files (x 86), but find not because it's XP?

  It's been a few months that I posted this question and I do not know if someone cares about this track, but the solution I found was to put the custom in error code file \National Instruments\Shared\Errors\English\

  There are other places that the runtime will look for the custom error codes (I tried all the ones listed above), if the same error codes exist in 2 places the error popup will appear two error messages. Error default 1, it looks like:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: Command requires GPIB controller charge controller.

  So if you have a custom error code file and it is available in 2 places that LabVIEW RTE check error codes, you will get the same message before and after the =.

  List the error as "still included" file when building the executable or by checking the box to include files in error did not tour, obviously. Unless you create a Setup program to distribute the application, the error code file must be moved manually. Shared\Errors file works best for me because it's a place that makes sense.

  Also, don't worry - it doesn't me taken 5 months to understand this point, I do not update all my loyal followers (ha) with a solution.

• the .c and .h files still open in CVI 9.0 even with CVI 2009 is installed

  I had this problem for a while but have managed to live with her. Since I installed LabWindows/CVI 2009 my .c and .h files still open in LabWindows/CVI 9.0. all .cws, .fp, .uir and .prj files will open in 2009. I tried the files in "file types" remapping and even fiddled with the registry to try to get the .c and .h files to open with the correct version of the CVI. This has been without success.

  Any help would be appreciated.

  Thank you!

  I found myself fixing entering into the registry and change the path to cvi.exe. He was always set the path to the executable file for CVI 9.0. That's what the types of files for .c and .h files were SEO even if I selected the executable file in 2009 of the CVI.

  It seems that the path was never changed when I installed CVI 2009.

  Regards-

  John o ' c

• Security for the COD file question: is it possible to extract the BlackBerry devices .cod file?

  Is it possible to extract the BlackBerry devices .cod file?

  We want to ship the BlackBerry device with our application installed.

  I was wondering if need to add additional security.

  Installing drivers USB BlackBerry Desktop Manager, connect the BlackBerry to the PC via USB/Bluetooth and «save the JavaLoader.exe u your_module_here»

  PS JavaLoader.exe comes with the BlackBerry development Java (JDE) environment.

• Problem with the updates and creative cloud

  I have recently moved from perpetual LR to the LRCC.  To do this, I downloaded and installed the program "creative cloud."  I also downloaded and installed the Psalm I find I have the latest version of LR, but PS 2015.1.2.   I have read many power outages of Adobe FAQ etc, but still problems.  On the one hand, my request for clouds to create does not say "Creative cloud", it's called "Adobe Application Manager."  Even when I redownloaded the creative cloud program, I get the same result.  Many troubleshooting FAQ have to do with the feature on the 'Creative cloud' application, I can't make them on "Adobe Application Manager."  No matter what I do, in the Adobe Application Manager or a manual "Check for Update" in Photoshop CC, it tells me that I am aware of nothing else available.  Yet he clearly also tells me I have 2015.1.2.   I tried signing and return several times.  So my questions: 1) is equivalent to Adobe Application Manager creative Cloud / if not, how can I get Creative Cloud.  (2) how to upgrade my programs?  I know that these are the basis and I searched the FAQ and troubleshooting files without result.  Thanks in advance.

  Responded.  Got an answer through Support Adobe.

• Photoshop elements 13 said that there was a problem with the download and recommend exit us and restart

  We bought a new laptop and 13 items today. We spent the day trying to get it set up. We tried to download the 13 items at least 6 times. Whenever it took about 45 minutes to download, but when we open the file and click on set up it says that there was a problem with the download and it recommends that stop, restart and download it again? How we work what goes wrong? We had to remove the files and start every time. I don't have another day to try to get this sort. Should not it is just a matter of downloading and then, should not come with a message to install and we just press Yes and it works.

  You can also download the trial version of the software directly (No Download Manager) through the page linked below and then use your current serial number to activate it.  You should get two files, an executable file and a compressed file.  Run the executable file and it will install the rest.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• I have installed Adobe Audition on my pc but I have a problem with the time and the effects of pitch appear unavailable

  I have installed Adobe Audition on my 64-bit pc but I have a problem with the time and the effects of pitch appear unavailable because... I can do?, installed on another PC laptop 64 bist and does not

  My guess is that you are in multitrack view and not editview

  These fx are destructive and only take effect when you change a single audio file in editview

• Error downloading Photoshop element 12: Arvato Berthelman - Download Manager error - unfortunately, there is a problem with the link to that file. This problem may be due to the number of users trying to download

  Error message when downloading Photoshop element 12: (I bought the license in a store)

  Berthelman arvato-

  Download Manager error-

  Unfortunately, there is a problem with the link to that file. This problem may be due the number of users trying to download the file, or the product may no longer be available. Please as minutes of a few in. If this privilege is still not available, please contact customer service at the address [email protected] or number 604-915-5200

  == > Les DEUX @ and phone number are fake!

  Hi Mireille56,

  The place where you are trying to download the software.

  [email protected] is not an email from Adobe Support.

  Please try to download Photoshop elements 12 of: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

  < translated="" via="" google="">

  Hi Mireille56,

  Where you are trying to download the software.

  [email protected] is not an Adobe support email.

  Please try to download Photoshop elements 12 from: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

• problem with the CURSOR and WITH clause

  Hi guys,.
  
  I have never created a package before. I try to run it, but I get:
  ORA-06550: line 8, column 16:
  PLS-00382: expression is of the wrong type
  ORA-06550: line 8, column 3:
  PL/SQL: Statement ignored
  
  I know that my problem is in the next section
  
  OPEN FOR V_io_cursor
  
  with GOT_R_NUM like)
  
  
  Is the above correct?
  
  When I copy paste the "heart" of the query, it works very well. I really have a problem with the CURSOR and the declaration.
  
  Here's the code in its entirety. I know that the code is much more then he returned, but ignore this overload that was to do some tests to make sure that I can achieve any query request.
  
  CREATE OR REPLACE
  PKG_SPF_NATIONALREPORTS PACKAGE BODY IS
  
  PROCEDURE GET_NATIONAL_TOTAL_RESULTS (P_SelectFields IN varchar2, P_SUMFields IN varchar2, io_cursor IN OUT C_RESULTS)
  IS
  v_io_cursor C_RESULTS;
  
  BEGIN
  
  OPEN FOR V_io_cursor
  
  with GOT_R_NUM like)
  SELECT
  -START P_SelectFields
  r.cli_served,
  r.EIER,
  -END P_SelectFields
  r.RC,
  r.Year_ID,
  r.period_id,
  r.agreement_type_ind,
  CONTRACT_NUMBER. CONTRACT_NUMBER_TEXT,
  YEARS.year_desc,
  RC_CODE.rc_code_id,
  RC_CODE.rc_code,
  AHRDA HOLDERS. AHRDA_ID,
  AHRDA HOLDERS. REGION_ID,
  AHRDA HOLDERS. PROVINCE_ID,
  AGREEMENT_TYPE. AGREEMENT_TYPE_ID,
  AGREEMENT_TYPE. AGREEMENT_TYPE_DESC_EN,
  ROW_NUMBER() over (partition R.YEAR_ID, R.CONTRACT_Number_Text
  order by
  P.PERIOD_desc
  (/ / DESC NULLS LAST) AS r_num
  RESULT r
  JOIN period p ON r.period_id = p.period_id
  JOIN CONTRACT_NUMBER ON r.contract_number_text = CONTRACT_NUMBER. CONTRACT_NUMBER_TEXT
  JOIN RC_CODE ON contract_number.rc_code_id = rc_code.rc_code_id
  JOIN AHRDA holders ON ahrda.ahrda_id = rc_code.ahrda_id
  JOIN AGREEMENT_TYPE WE AHRDAS. AGREEMENT_TYPE_ID = AGREEMENT_TYPE. AGREEMENT_TYPE_id
  JOIN the YEARS WE r.year_id = YEARS.year_id
  )
  SELECT year_desc
  -START P_SUMFields
  SUM (cli_served) AS sum_cli_served
  The SUM (eier) AS sum_eier
  -END P_SUMFields
  OF got_r_num
  GROUP BY year_desc
  ORDER BY year_desc
  ;
  
  io_cursor: = v_io_cursor;
  
  END GET_NATIONAL_TOTAL_RESULTS;

  Agree - all this talk of loops FOR is completely irrelvant.
  A refcursor is usually the exact mechanism to return a result set.

  What is C_RESULTS?

  Just use SYS_REFCURSOR.

  No need for local variable.

  OUT why? Not just walk OUT?

  PROCEDURE GET_NATIONAL_TOTAL_RESULTS
  (P_SelectFields IN varchar2, P_SUMFields IN varchar2, io_cursor OUT SYS_REFCURSOR)
  IS
  BEGIN
   OPEN io_cursor FOR ...
  END;