the .c and .h files still open in CVI 9.0 even with CVI 2009 is installed

Similar Questions

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  When I close my laptop running 2 files and when I do the closing and after that I open the screen is white... what I need to do?

  Hello

  Let us try these methods and check if that helps.

  Method 1.

  You can try the last good known Configuration and check if that helps.

  Using the last good known Configuration: http://windows.microsoft.com/en-in/windows7/using-last-known-good-configuration

  Method 2.

  You can use the restore points for Windows 7 to return to a previous state, when your computer was working properly.

  System Restore: http://windows.microsoft.com/en-us/windows7/products/features/system-restore

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any Windows problem. We will be happy to help you.

• In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  In photoshop CS5 (bridge) I could select all the images and their size still before turning them into JPEG files. I can't find a way to do it in CC

  Hi Tanuj.

  I actually understand it. Not the best user friendly system. Where as before (CS5), I just had to go to crop tool and choose the dimensions and the inches now it in the window. Just really complicated for nothing.

  Thanks anyway Tanuj

  Melanie

• I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  I filled out a form on the page 8 and he saved several times along the way, and now when I open this file, the form is empty?  How can I save my work so I can open the form later and it contains all my data?

  Hi Eileen97933052,

  The PDF form must be extended drive in order to have this feature to save & print the form data.

  Please confirm by the PDF Creator is the PDF reader or not extended.

  Otherwise, if you have Acrobat installed on your system, you can reader extend PDF form yourself.

  Kind regards

  Nicos

• Windows 10 Lightroom 6 (not CC) installed and reinstalled but still opens with a HUGE text in the two panels, leaving only a small space to see photos. Preferably and other screens also occupy more than full screen. Appears as tho Lightroom is in failure

  Windows 10 Lightroom 6 (not CC) installed and reinstalled but still opens with a HUGE text in the two panels, leaving only a small space to see photos. Preferably and other screens also occupy more than full screen. Appears as tho Lightroom is in failure Mode (failure mode). Can anyone help?

  Hello

  Click Edit > Preferences

  Go to the interface tab and check the font size: it should be automatic.

  Press enter

  Restart the Lightroom

  Thank you

• Cannot find the left column that used to be on the documents and photo files.

  Cannot find the left column that used to be on the documents and photo files. On this missing column I know was there before, had options fax, copy and other things we could do with these files. I want to get that back. Thank you.

  With my Documents folder open, go to Toolsand then click on Options files . On the general tab, tasks section, choose Show tasks in folders.

  I would like to know if it works. Thank you.

• Everything that I try to open brings the 'open with' box to the top and I can't open anything...

  No matter what (files, programs, etc) I try to open makes the 'open with' box come up.  most of the programs are not in the list.  If it is in the list, and I choose to open to use it, it rises but does not load.  then the 'Open with' box comes back upward.  (process without end, I spent ten minutes doing to ensure that)  I tried to use system restore to before it started happening, but an error msg comes up saying that it cannot be opened.  I tried a few solutions .exe error in the forum, but some of the things that I needed to access opens either.  Help, please

  Run .exe from Doug Knox fix and then carefully analyze for malware.

  http://www.dougknox.com/XP/file_assoc.htm

  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• All my photos suddenly have the extension .cfog added to the end of the name, and I can't open them. That's happened?

  All my photos suddenly have the extension .cfog added to the end of the name, and I can't open them. That's happened?

  Hi David,

  It's because you have installed CloudFogger, which protects your files in enrcytpt them to ensure safety for DropBox or GoogleDrive. Probably, you have not installed the program, that's why it shows all files with the extension .cfog I you Explorer.
  Re-install the program and you connect to your account back on your files.

• How can I fix the problem of 'linked file' when opening file on other computers?

  How can I fix the problem of 'linked file' when opening file on other computers?

  The links must travel with the illustrator file. In other words, you can't send someone your page layout and not send them all the assets placed in the layout. However, you can embed links, but their incorporation will make your file much more available.

  Use the links Panel to incorporate images. Click on the small icon in the upper right corner of the control panel link drop-down list. I've included a screenshot.

  

• Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  Last year, I bought my laptop and I tried to create a second user account but I placed it somehow this account as the Admin user. I don't remember the password and my file vault is of course.

  What password? You can change a password for the account, but if you do not know the FileVault password, you are in a bind. You need to call Apple directly if you their sent an emergency password when configuring the FV.

  For a user account:

  You forgot your password

  Lion or later version

  Reset a password in Mac OS X 10.7 Lion

  OS X Lion mountain - reset a login password,

  OS X Mavericks-solve password problems,.

  OS X Lion-Apple ID can be used to reset your password for the user account.

• Create a script to list all the .bat and .cmd files with the dir command &

  Hello

  Im trying to create a script that will list all the .bat and .cmd files in a specific folder and add the data to a new file (file.txt) - example below:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat>>desktop\file.txt/OD

  IM able to search the F drive and the list of all the .bat files using a generic parameter, but ideally id like to search for .bat and .cmd files, but whenever I have it try does not work. Any ideas?

  I tried the following:

  dir c:\>desktop\file.txt/OD
  dir d:\>>desktop\file.txt
  dir f:\jobs\*.bat,*.cmd>>desktop\file.txt/OD

  Any help is appreciated, the reason for which I need to check all the .bat and .cmd files is to ensure that the scripts on a cluster are all data, so need them all listed in a doc if possible

  Thank you

  Hello

  Thank you for visiting the Microsoft answers community site. Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for guys official script Forum. Please ask your question in the official Scripting Guys Forum.

  http://social.technet.Microsoft.com/forums/en-us/iTCG/threads

• I tried, on and off for three days download Lightroom 5 I bought in good faith a price of commercial version free.  I tried at various times of the night and usually do about 30% downloaded once get to 99% with 1 s t

  I tried, on and off for three days download Lightroom 5 I bought in good faith a price of commercial version free.  I tried at various times of the night and usually do about 30% downloaded once getting to 99% with 1 sec each time of seven or eight tests, it had frozen.  I bought this product in good faith.  I had a very expensive (bought only three months ago) PC Windows 7 with water and huge hard drives cooling system with more RAM than anyone I know not.  It is not good enough.  When I read your solutions for my problem, I read on the things written in the words I don't understand.  All I want is Lightroom 5 I won't learn all this from gobble *... I'm nearly seventy eight years... I don't have three days to mess around with your exhaust system to provide me with a product I want to use today.

  Installation errors can have all sorts of causes that should not necessarily be attributed to the material. Have you followed the standard procedures turn off security tools that may interfere? If not find newspapers install could clarify things.

  The problems with the Setup logs. CS5, CS5.5, CS6, CC

  Mylenium

• I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?

  Unfortunately, Halo 2 does support Windows Vista and more.  Windows XP is not supported.  There may be 3 party hacks that can make it work, but they are not taken in charge and potentially dangerous.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• All of a sudden my creative cloud will not be open. Opeining I tried all the icons and program files. Still nothing.

  My creative cloud that ap desktop does not open. She is entered. Tried opening all of the creative cloud icon. Also tried to open program files - still nothing.

  William Smith

  Hi German,

  Please see the thread next where this issue has been addressed: https://forums.adobe.com/thread/1308845

  Kind regards

  Rahul