Problems running (service) - Oracle Application testing Suite

Similar Questions

• Setting up Oracle Application Testing Suite components Server 12.5.0.2.537 takes a long time.

  I am trying to install Oracle Application Testing Suite. It has installed successfully,

  but ' implementation of Oracle Application Testing Suite components Server 12.5.0.2.537 ' takes a long time.

  It is showing the message "set up pending".

  It's also show message 'spawning' C\OracleATS\bin\deploy.bat C\OracleATS\install\oats.ear".

  Progress of the installation is stuck at 99% of last four hours.

  Any idea on this?

  Thanks in advance.

  Dear Nilesh,

  Please try reinstalling with admin privileges.

  Click with the right button on setup.bat and run as Administrator.

  
  

  Please note uninstallation is not necessary.

  Thank you best regards &,.

  Susanto Paul

• New on the need for Oracle Application Testing Suite Userguide

  Hello
  
  I am new to Oracle Application Testing Suite have to use Oracle Application Testing Suite 9.2 for Loadtesting.
  
  Is could someone please tell me where can I find the reference guide for Installation as well as Oracle Application Testing Suite Loadtesting.
  
  
  Thank you
  REDA

  Hi reda,.

  There is a link to the documentation here-

  http://www.Oracle.com/technetwork/OEM/app-test/index-084446.html

  Kind regards
  Jamie

• Oracle Application Testing Suite with Apex

  Hello
  
  I review the feasibility of the use of Oracle Application Testing Suite with Apex to test the features and scalability. I tried to test the navigation and the process but am unable to get accurate results. Is it possible to make a page fails if an ora error message appears on the screen.
  
  I also tried to create a control test it is a logon has succeeded. If the operation is successful, the user is navigated to a page. I then adjust the code in the application to make the logon fails. I'm waiting for the result of demonstrated not in the script. No matter how hard I try, I can't get the results of success. Does anyone have an idea on how test Application Apex Oracle
  
  Any help would be much appreciated
  
  KeV

  "Insert a custom object of test."
  What version do you use?

• Application based on Oracle Application Testing Suite support Applet?

  Hello
  
  Can someone let me know if Application based on support on Oracle Application Testing Applet? additional modules needed for this? or it is not supported

  Hello

  The applet support is planned for the next version (9.20) which should be out in September.

  Alex

• Oracle Application Testing Suite (how to use)

  Hi all

  First difficulty.

  Write a script to automate the tests by OpenScript version 12.1.0.2.58. (or any other version)

  What are the requirements?

  Windows?

  Java?

  Browser?

  Ex: Automate the creation of an organization in EBS during check in is application does not open and I can't finish the test recording.

  Second difficulty

  I wish that, after recording, synchronize this automated testing with OTM (Test Manager).

  What are the conditions to make it work?

  Thank you very much for your attention.

  William Ferreira Alineri.

  Hi William,.

  • Just click the record button and navigate in your scenario, OpenScript will automatically record the script for your scenario.
  • You can find requirements in the guidance note. Find the note of support in OracleATS (installed folder)--> docs\en\OATSReleaseNotes.pdf
  1. First try to launch the forms manually
  2. If no issues then goto C:\Documents and Settings\'user name'\Application Data\Sun\Java and the rename high1 deployment
  3. Try saving now. If there is a problem let me know
  • For the execution of scripts of OTM (OTM, script, and run in the same machine), goto services.
  • Stop the 'Oracle ATS Agent' service and change the startup type to manual
  • Run C:\OracleATS\agentmanager\bin\AgentManagerService.exe-c C:\OracleATS\agentmanager\bin\AgentManagerService.conf of cmd (installed in the C: drive of OATS)
  • Add your script in test OTM and run your script

  Kind regards

  Dembélé M

• Problem running the sample Application after installation patch set 4.0.2.00.07

  We just applied the fix 4.0.2.00.07 on our environment to TEST APEX4.0.
  Now, I can not run the sample application. "When I run the application, log in using either the administrator or the user of demo with the #lower_case_workspace_name #", the browser generates the following error message:
  
  ORA-06550: line 2, column 8: PLS-00201: identifier 'CUSTOM_AUTH' must be declared ORA-06550: line 2, column 1: PL/SQL: statement ignored
  ERR-10460 error cannot perform the function of verification of the authentication credentials.
  
  The sample application works very well on our DEV APEX 4.0.0.00.46 environment * without * the patch set 4.0.2.00.07.
  
  Does anyone have an idea how to solve this problem
  Thank you

  Hello

  Ensure that the CUSTOM_AUTH & CUSTOM_HASH functions exist in the scheme of the analysis of the sample application.

  CITY

• Application Testing Suite... does not come to the top

  I installed the test applications and for some reason suite any... the url is not coming...
  services are started.
  
  8088 / admin
  
  or
  8088 / olt
  
  Thank you

  I installed OATS 9.3 on a computer windows laptop and I got the error message of tns. I was able to solve this problem by adding an entry in my sqlnet.ora file. The entry should look like

  OTM_CONNECTION_DATA_1 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = XXX. XXX.115.1) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = SID)
  )
  )

  I think that important takes it name on the first line... I hope this helps...

• Oracle load test agent configuration

  Hello
  
  I just started working on Oracle ATS 9.31.0036.
  In my computer, I installed the OAT application with all the options.
  Now, I want to configure the Remote Agent that has been installed in another machine.
  Can you anyone provide me with the operating manuals for the implementation of Remote Agent.
  I have another question. When after the start of service of OATS, I'm not able to open the administration console.
  I couldn't see any application in the deployment of the 8088 console / console.
  But no service (Oracle Application Testing Suite Application Service) proof of status started
  What could be the problem here.
  
  Thanks in advance.
  
  Kind regards
  Marsan
  
  Published by: Marsan on March 15, 2012 02:44
  
  Published by: Marsan on March 15, 2012 02:50
  
  Published by: Marsan on March 15, 2012 02:58

  Hello

  I had the same problem with the administration console and Test Oracle Manager. I got it working by deploying oats.ear. Deployments, tab, select Install. Then you must select the correct ear file. I think that this right, we will find file % ear OATS_HOME%\install\oats.ear. After that just deploy it with the default values and hope your JNDI tree will lie down properly.

  cordially vihall

• Problem running scripts with Oracle Test Manager (MTM)

  Hi all!
  
  I am facing a problem to run any test in OTM.
  I'm adding scripts that I created in OpenScript (and which take place in perfect inside) but running in Test Manager fails.
  To be more precise, I even created a very simple script for the case in which I open the browser, navigate to an existing page (for example www.fmstocks.com/fmstocks - like documentation for example) and then I close the browser.
  What is happening is that the test fails after a few seconds. In the report results, summary of Script, it there a failure result to give Total iteration:
  
  + Object "/ web:window[@index='0" [or @title =' subject: empty '] "+."
  + did not action: +.
  + < name of message = "Navigate" > < parameter WindowIndex = '0' > +.
  + < / parameter > +.
  + < parameter Url = "http://www.fmstocks.com/fmstocks" > +.
  + < / parameter > < / Message > +.
  
  This is the same result that I get in any script I run (with different Url of course).
  I tried to alternate some settings in the Manager (Tools-> system) systems and change my OTM server, I've seen in a thread. I found that if I write as a user name and password to my windows or my OTM username and password (instead of JMSAdmin I see is the default user name) when I run the test simply never stops!
  To be clear, I just started using OATS. All the foregoing is done with the default settings after installation. OpenScript works fine but I need OTM so that I can perform several set of test scripts.
  
  Any help is appreciated!

  Hello
  You must first set back the remote system OTM to JMSAdmin / the_pwd_you_supplied_during_installation
  Then, you must stop the Windows Service called "Oracle Application Testing Suite Agent Service" and put it in the manual.
  Then, you start the agent from the command line
  C:\OracleATS\agentmanager\bin\AgentManagerService.exe - c C:\OracleATS\agentmanager\bin\AgentManagerService.conf (something like that according to the installation path).

  Let us know if it is ok then.

  JB

• Cannot start Oracle Application Suite

  I installed Oracle Application Suite on my laptop and tried to access it and immediately I get the following error:
  
  8088 / olt /-> "cannot display the page.
  
  I checked through the entrance of the local hosts and 127.0.0.1 pointing to my local host.
  
  In trials, I did try telnet localhost 8080, but that does not work either?
  
  I don't know what the issue or am I missing something?
  
  Appreciate your help in this matter.
  
  Viral

  OK that's the good news, we know what is the problem!

  Make sure you have the file jboss - 4.0.2.zip somewhere in your system, the file should be of about * 59.2 MB *, I saw some JBoss installations, which were not due to a corrupted file.

  Then go to:

  Start to -> all programs -> Oracle Application Testing costumee- Tools >-> day Oracle Application Testing Suite Application Service

  Then point the wizard to the folder containing the file zip, not to the zipfile itself.

  This process should update the application server.

  Note also that it should be JBoss 4.0.2

  Good luck

  Alex

• Various problems related to the tests for Oracle Applications R12 PreInstall HCVE

  Hello world
  
  I am preparing a Linux machine for installation of Oracle Applications R12 and currently I have several problems with the HCVE tests that are part of the ANR ([Doc ID 250262.1| https://metalink.oracle.com/metalink/plsql/f?p=130:14:4000869102561861013:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 250262.1, 1, 0, 0, helvetica]). Here are the first two problems:
  
  1. when I run the RDA (. rda.pl t hcve) and select a test (in this case, "Oracle Database 11 g R1 (11.1.0) PreInstall (Linux AMD64)"), the script wonder of the JDK 'House '. Why the script asks if the installation process will install JDK? If I jump it (i.e. just press enter), the JDK test shows up as failed in the results. What should I put here?
  
  2. the tests 'process limit' and 'Limit descriptors' fail both:
  
  A00120 doesn't have a process boundary less 16384
  A00130 FAILURE of lower limit to 65536 descriptors
  
  I put these two values in /etc/security/limits.conf according to the instructions here: [Doc ID 761566.1| https://metalink2.oracle.com/metalink/plsql/f?p=130:14:4000869102561861013:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 761566.1, 1, 1, 1, helvetica]
  
  Here are the lines I added to limits.conf:
  
  # To install Oracle (MetaLink Doc ID: 761566.1)
  * hard nofile 65535
  * soft nofile 4096
  * nproc 16384 hard
  * soft nproc 2047
  
  Why so this test fails?
  
  -Kyle

  Kyle,

  You can submit feedback and send an email to Support of Oracle ([email protected]). The link 'Submit comments' is available in most of the documents of Metalink GDR (Diagnostics).

  Kind regards
  Hussein

• Installation error Oracle Applications E-Business Suite R12

  Hello world
  I have the error during the installation of Oracle Applications E-Business Suite R12 on Windows server 2003 R12
  
  Please help me
  
  This is the log file:
  
  
  Treatment DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
  Running instantiation drivers for E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunias.cmd
  dest: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
  backup: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunias.cmd
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adrunat.cmd
  dest: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
  backup: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd to E:\oracle\VIS\apps\apps_st\appl\admin\VIS_erp\out\templbac\adrunat.cmd
  Step 0-5
  
  Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunias.cmd
  
  Step 3 of 5
  
  Step 1 of 5
  
  Command: E:\oracle\VIS\inst\apps\VIS_erp\temp\adrunat.cmd
  
  Step 4 of 5
  
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxdbctx.tmp
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  dest: E:\oracle\VIS\db\tech_st\11.1.0\appsutil\VIS_erp.xml
  instantiate the file:
  Source: E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\etc\adxmlctx.tmp
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  instantiate the file:
  Source: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  dest: E:\oracle\VIS\inst\apps\VIS_erp\appl\admin\VIS_erp.xml
  Availability of data
  
  -----------------------
  
  
  command: cmd.exe /c sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.cmd E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
  
  'E:\Oracle' is not recognized as an internal or external command
  operable program or batch file.
  
  
  RW-50011: error:-connection of database ORACLE_HOME test returned an error: 1
  command: cmd.exe /c sqlplus E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.cmd E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\bin\riwTDBup.sql APPS/APPS
  
  'E:\Oracle' is not recognized as an internal or external command
  operable program or batch file.
  
  
  RW-50011: error:-connection Apps ORACLE_HOME test returned an error: 1
  Download of the configuration
  
  ----------------------
  
  
  Download the D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt config file
  
  AppsConfig: "config.txt" download...
  
  ---------------------------------------------------------------
  ADX database utility
  ---------------------------------------------------------------
  
  getConnectionUsingAppsJDBCConnector()->
  APPS_JDBC_URL = "null".
  Try to get by using connection based SID connect descriptor
  getConnection()->
  sDbHost: erp
  sDbDomain: erp
  sDbPort: 1521
  sDbSid: SCREW
  sDbUser: APPS
  Try to connect using SID...
  getConnectionUsingSID()->
  JDBC URL: jdbc:oracle:thin:@erp.erp:1521:VIS
  Exception occurred: java.sql.SQLException: IO exception: the network adapter could not establish the connection
  Try to connect using SID as ServiceName
  getConnectionUsingServiceName()->
  URL JDBC: jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=erp.erp)(PORT=1521))(CONNECT_DATA=(SERVICE_NAME=VIS)))
  Failed download of the config file to D:\DOCUME~1\ADMINI~1\LOCALS~1\Temp\08030118\conf_VIS.txt
  
  The environment file
  
  ------------------
  
  
  RW-50016: error:-database's ORACLE_HOME environment file not created:
  File = E:\oracle\VIS\db\tech_st\11.1.0\VIS_erp.env
  RW-50016: error:-file environment ORACLE_HOME Apps was not created:
  File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.3\VIS_erp.cmd
  RW-50016: error:-iAS ORACLE_HOME environment file has not been created:
  File = E:\oracle\VIS\inst\apps\VIS_erp\ora\10.1.2\VIS_erp.cmd
  RW-50016: error:-environment APPL_TOP file not created:
  File = E:\oracle\VIS\apps\apps_st\appl\VIS_erp.cmd
  RW-50016: error:-ADOVARS of the environment file has not been created:
  File = E:\oracle\VIS\apps\apps_st\appl\admin\adovars.cmd
  RW-50016: error:-APPSCONFIG not created:
  File = E:\oracle\VIS\apps\apps_st\appl\admin\adconfig.txt
  DBC file
  
  ----------
  
  
  RW-00023: error:-DBC file has not been created:
  File = E:\oracle\VIS\inst\apps\VIS_erp\appl\fnd\12.0.0\secure\VIS.dbc
  HTTP
  
  ------
  
  
  check the URL = http://erp.erp:8000
  
  RW-50015: error:-HTTP listener does not. The service may not be started on the port again. Please check the service and use the button try again.
  Help page
  
  -----------
  
  
  check the URL = http://erp.erp:8000/OA_HTML/help
  
  RW-50015: error:-Help Page does not. The service may not be started on the port again. Please check the service and use the button try again.
  Virtual directory
  
  -------------------
  
  
  RW-50015: error:-Http virtual directory server is not responding. The service may not be started on the port again. Please check the service and use the button try again.
  JSP
  
  -----
  
  
  check the URL = http://erp.erp:8000/OA_HTML/jtfTestCookie.jsp
  
  RW-50015: error:-JSP does not. The service may not be started on the port again. Please check the service and use the button try again.
  Login page
  
  ------------
  
  
  RW-50015: error:-Login Page does not. The service may not be started on the port again. Please check the service and use the button try again.

  Treatment DriverFile = E:\Oracle R12\Oracle12_Source\Oracle12\stage12i\startCD\Disk1\rapidwiz\template\adriapps.drv

  You cannot use spaces in file names, so I think that these errors are because you use a space in the name of the directory (Oracle R12) - Please change the name of the directory to another name without spaces (e.g. OracleR12) and retry the installation then.

  Thank you
  Hussein

• Problem running graphs in the OEID 3.1 sample application

  Hi all

  I just installed OEID 3.1 and I am trying to execute the sample application provided by oracle with reference to the procedure described in the section "Creating a sample Application of data Ingested with ETL Integrator" in the guide getting started in OEID 3.1 documentation.

  I have ingested the sample data in short using the EID31_SamplePipeline.zip pipeline Integrator ETL server.

  Now, when I try to run the chart named Baseline.grf using the IDE of clover for ETL Integrator, it throws errors - following

  Graph execution '. / graph/InitDataDomain.grf ' failed!

  Error during initialization of the graph.

  Initialization of the component failed [create Data Domain: CREATE_DATA_DOMAIN].

  Unable to create the Web Service proxy.

  Cannot establish the WSDL parser.

  Cannot read the WSDL to location ' https://localhost:7002 / short-server/ws/manage? wsdl '.

  WSDLException: faultCode = PARSER_ERROR: Wsdl not found https://localhost:7002 / short-server/ws/manage? wsdl

  Inner exception: element [CREATE_DATA_DOMAIN:Create Data Domain] - initialization of the component failed [create Data Domain: CREATE_DATA_DOMAIN].

  
  

  Note:

  I use the basic SSL communications.
  

  I even updated to 7002 port numbers (this is my SSL port for the server for short) in workspace.prm and I even changed my graphics for https rather than http.

  But I still get this error.

  I added VM arguments in JRE for trustStore and keystore and passwords corresponding paths.

  I added the same IntegratorETL.ini file too.

  I've also marked compatible SSL also true for components that have this property.

  
  

  Interestingly, I'm even able to load the wsdl from the browser file if I get the URL

  https://localhost:7002 / short-server/ws/manage? WSDL

  While the ETL Integrator Designer mentions the exact URL even when he gives with the exception of WSDL saying Wsdl not found.

  
  

  Can someone tell me what could be the problem and how I need to solve this problem?

  Any help/suggestions appreciated.

  
  

  Thank you!

  Christophe

  
  

  Hi Christophe,

  I have consulted several groups, and although it looks like initially a hostname resolution problem (it came a lot), support was offered that this is related to the fact that you try to run the sample application in SSL mode, while the Start Guide that documents this application indicates that it is running using the no - SSL only. In other words, when you install the software for the purposes of execution of a sample application (and not for production), you must explicitly uncheck the flag SSL. This is not recommended in production.

  So, I suggest to uninstall and reinstall in non-secure mode.

  Please see the requirements on the sample application here. The doc has a requirement of "without SSL:

  http://docs.Oracle.com/CD/E40518_01/General.310/eid_getting_started/TOC.htm#about%20these%20Installation%20instructions

  Hope this helps and sorry you need to reinstall.

  Julia

• WebService call failed during the test adapter for oracle applications

  In SOA 11 g, when I test my application that uses Oracle Applications card it gives an error "Webservice invocation failed. The error stack is
  
  oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occurred when the link was invoked.
  Exception occurred during invocation of the JCA binding: "binding JCA execute of operation 'getDailyRatesAdpSelect' failed due to the reference: connection problem component binding JCA.".
  JCA Binding component is unable to create an outgoing connection of JCA (CCI).
  + OutboundR12:getDailyRatesAdp [getDailyRatesAdp_ptt::getDailyRatesAdpSelect (getDailyRatesAdpSelect_inputParameters, GlDailyRatesInterfaceCollection)]: the JCA Binding component was unable to establish an outgoing connection of JCA CCI due to the following problem: BINDING. JCA-12510 +.
  Location of JCA resource adapter error.
  Cannot find the adapter in JCA resources via the element of the binding .jca file
  
  The Binding of JCA component is unable to the adapter resources specified in the startup item: location = "jdbc/EI/R12.
  The reason is most likely to be
  
  + 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or +.
  
  + 2) the "element in weblogic - ra.xml has not been defined in eis/jdbc/R12. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). +
  
  Please fix this and then restart the application server
  
  The same as xADataSourceName the value of the Data Source JNDI name, but still get this error.
  Specify the location of the ra.xml file - weblogic and steps to guide to solve this problem.
  
  Thank you
  Sadia

  Looks like the Oracle Application adapter is not running.
  Connect to the weblogic administration console on your left window, click on * "Deployments" *, and then click your right window, under summary of deployments, check the status of * "OracleAppsAdapter."
  It should be in Pavilion OK, so that it can reproduce and accepting applications.

  Thank you
  Vijay