problems see my drive to seagate's wireless network. used to work

Similar Questions

• How to install a HP printer wireless network using an Access Point in Windows 7

  
  

  Let me know if you have any questions or need help to install a HP printer wireless network using an Access Point in Windows 7.

• Cannot install the driver for Pavilion-dv6-Wireless-Network-Adapter-Drivers

  So I just install a new copy of Win7 Ultimate 64-bit version and I'm having the hardest time for an installation driver for the wireless network card.

  I was download the map and try to install at least 5/6 times but it will not yet appear in my device manager, or I am able to turn on the radio/satellite icon in my keyboard to turn on the wireless adapter.

  I have spent the last 2 hours trying to get this to work without success.

  Product number: A6Y56UA
   
  Description: HP PAVILION DV6-6C11NR ENTERTAINMENT NOTEBOOK PC

  I followed the post on this thread and dl only adapter but it still wont ' appear in my book. It drives me crazy

  http://h30434.www3.HP.com/T5/wireless-Internet-home-networking/pavilion-DV6-wireless-network-adapter...

  Here is the link for the driver, you need to map wireless in this model.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp? lang = in & cc = us & prodTypeId = 32...

  Hello warrantt,

  Welcome to the HP Forums!

  I understand that you can not install a wireless card with your computer. I'll do my best to help you! Here are both available for your laptop:

  Driver LAN wireless Broadcom

  RALink 802.11 b/g/n WiFi Adapter

  Try to download and install a. If one does not work, try the other. Please let me know your results and you see any errors. Thank you!

  Mario

• Cannot install the driver for DV6-6c11nr wireless network

  OK, I've been on this thing for the last hours 8 tries to install the driver for wireless network.  I downloaded all the drivers from the HP website and whenever I try to install the downloaded file, it opens, then closes without installing.  I can't say I'm surprised because I've always had problems with the HP drivers, but this one is by far the worst.  Bluetooth driver also did the same thing and miss me the bus sm with usb driver that is not listed on the site.  I went to the website of ralink unsuccessfully.  I have a new install of windows 7 ultimate with all windows updates installed.  Any help would be greatly appreciated.

  Hello

  Download and install:

  • Graphics driver AMD from here.
  • Realtek Wlan driver here
  • Here validity fingerrint sensor driver
  • AMD USB 3.0 driver from here

  If you will ask you to restart the system after you install a driver, please do it before you install the other.

• Can someone tell me how to get a compatible free driver to fix this wireless network card?

  When my laptop starts it is what I see: your network wireless card has stopped working properly because a compatible driver is not available for this version of Windows. PLEASE HELP IF YOU CAN!

  You will get the drivers from the Web site of the manufacturer of the computer or the manufacturer of the card.

  What card?

  Make and model of computer?

  Version of Windows?

  Did you change the version of Windows that was originally installed on the computer?

  He has already worked?

• Computer laptop everything suddenly does not "see" my wireless router, use to work properly

  I have a HP laptop and it has implemented a wireless network a wireless d-Link N router.  Everything worked well for about 3 months.  Now, he can not connect.  Running the troubleshooting application to choose a connection - all my neighbors show up, but not that of my house.  The router is also new (he and laptop were Christmas gifts).   It used to work fine with Windows 7 one and now nothing...  I can't it appears in the list of wireless connections.
  My laptop 5 years running XP is in line with this router and it works fine - so I don't think that it is the router that is the problem.
  Thank you!

  Hello Bchek,

  Thank you for your message.  Check with your D-Link documentation and settings to make sure that the SSID broadcast has not been disabled.  This would prevent you from being able to see the wireless network.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Name of network problems; numbers and not showing in the wireless network ID

  In my network and sharing on the map at the top of the page Center, my wireless network is identified as Queensgate 2 on my Pavilion Entertainment PC (Vista). On my g7 series Pavilion, it is identified as Queensgate 3 (Windows 7). In the zone just below the map on two machines, the network is identified as Queensgate. Queensgate is the correct ID. There are no numbers on my SSID wireless router.

  When I connect to the network dialog box confirms the connection to Queensgate (no numbers).

  Can someone tell me how to solve this problem?

  Thank you

  Frank

  Hi Frank,.

  I think I misunderstood what you rename, but seeing your description of what you have changed in Vista, I think I know what you need to do in Windows 7.

  Open the network and sharing Center.  Look at the icon in the middle of the network map - you should see the icon itself below the network card and to the left.  Click on this icon and you should be able to change the name of the network.  Click Ok after you change it and you should see the change immediately reflected in the network map.

  Kind regards

  DP - K

• Help: XP driver for 3000 G410 wireless network card

  Hi all

  My recently purchased g410 came with Vistra driver (only) CD, while I install Windows XP instead. I downloaded the drivers from the Lenovo Web site and everything worked except the driver winXP for "wireless network adapter" (all 3 of them: Gemtek, 3xxx and 4xxx), the adapter was simply not acknowledged.

  When I look at g410 spec, it says something like "Type of wireless network: InviLink 802.11bg", this means that there is another type of wireless network driver those available on the Lenovo site? ' " If Yes, where can I get this driver? Can someone, please?

  Thank you

  fitro

  Try to use the Gemtek driver comes with vista driver. It is compatible with XP. It worked for me.

• HP envy 15 notebook PC: driver HP Envy 15 Wireless Network adapt

  I want driver for HP ENVY 15 wireless network adapter

  REF: L0C92EA #ABV

  Operating system: windows 7 Enterprise 64-bit

  Hello:

  You need these drivers wireless and bluetooth for this card...

  Driver LAN wireless Broadcom

  File name: sp69014.exe

  Software and driver Broadcom Bluetooth 4.0

  File name: sp66402.exe

• Can not find the drive to download setup wireless network in Windows XP

  I lost my wireless network and when I try to re - install using the network only available drives XP Wizard to download the software to install on my other computers are diskette (having non of my other computers) and a drive H I can't locate.  My USB storage device is the G drive that is not available as an option.  Is it possible that I can add it to the list, or is there a work around?

  Thank you
  Tony

  Try this link.

  http://eSupport.Sony.com/us/Perl/SWU-download.pl?MDL=PCVRS431X&upd_id=3746&os_id=7 M.V.P. - desktop experience | M.C.S.A. | M.C.P. - MS Server 2 k 3, Network Architecture

• problem connecting to the wireless network, but it worked yesterday.

  Yesterday, I was able to connect to my home wireless network, but not today. I also have a laptop and it connects to my wireless network, there must be something with the RT of Surface.

  Home Wireless works, why can't connect?

  Your post is off-topic in the forum Feedback, I moved it on the forum of "Web and Networking" Windows RT.

• a lexmark x 544 to connect to a wireless network does not work

  I HAVE a LEXMARK X 544 & can NOT GET IT ON MY WIRELESS NETWORK - I tried all three wep, wpa, wpa personal options with the key at the back of my router but no luck.  Help appreciated.

  Portable PS & other devices are connected wirelessly.

  Hi Amcfad,

  ·         What operating system is installed on your count?

  ·         You receive an error message?

  The majority of connection inside Windows 7 problems have been resolved by installing the latest driver for the device obtained from the manufacturer.

  http://support.Lexmark.com/index?page=product&locale=en&ProductCode=LEXMARK_X544&segment=support&UserLocale=en#1

  For more information about the update of drivers, see the article:

   

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  I hope this helps.

• Windows 7 enterprise - wireless network does not work at the office

  I'm a remote worker for a company.  I travel offices across the United States and hit this problem before, but thought it was just a transitory problem.  However, now I am in our headquarters and the problem has resurfaced.  Essentially, networks under Windows 7 Enterprise associates for wireless access points but cannot obtain a DHCP address.  I tried the usual: enough and ipconfig ipconfig / renew, I took it to our support people who confirmed that the configuration is correct, we have tried uninstalling the driver and put back in place, all in vain.  The configuration of the machine is:

  
  

  Dell Latitude E6400

  Windows 7 Enterprise x 64

  Wireless: Intel 5300 AGN

  Driver:

  Vendor: Intel

  Version: 12.4.1.4

  Digital signer: Microsoft

  Path: C:\Windows\system32\DRIVERS\netw5v64.sys

  The wireless works now in my office at home (I have a Windows 2003, Cisco 1200 AP domain and use WPA2 with PEAP to authenticate).  Please note that the configuration has NOT changed since the last time I was in this office (about 3 weeks ago).  We are a Windows 2008 R2 using NPS area (AFAIK).  Help desk support people are completely baffled.  The good news is that the cable works fine.

  I have included the following diagnostic report (with the suppressed SSID):

  ----------------------------------------------------------------------------------------------------

  Diagnostic information (wireless connectivity)

  Details on the diagnosis of wireless connectivity:

  
  

  Information for a diagnosis of connection

  The GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4

  Interface name: Intel(r) WiFi Link 5300 AGN

  Interface type: Native WiFi

  
  

  Connection incident diagnosed

  Auto Configuration ID: 9

  Login ID: 9

  
  

  State of the connection summary

  Connection started: 2010-11-30 14:12:24-133

  Profile match: success

  Pre-Association: success

  Association: success

  Security and authentication: success

  
  

  List of visible access points: 6 item (s) total, 6 article (s) poster

  BSSIDBSS Type PHY Signal (dB) channel/freq SSID

  -------------------------------------------------------------------------

  00-18-39-6E-51-6CInfra g-64 6

  00-13-1A-3B-EE-A0Infra g-57 6

  Da-ce-46-a2-9c-A1Ad hoc 6 g - 89

  00-13-1A-3B-F2-90Infra g-82 1

  00-1E-E5-A0-17-F0Infra g-53 2

  00-13-1A-3B-F0-20Infra g-91 11

  History of connection

  
  

  Information for Auto 9 Configuration ID.

  
  

  List of visible networks: 4 item (s) total, 4 article (s) poster

  Type BSS PHYSecurity Signal (RSSI) Compatible SSID

  ------------------------------------------------------------------------------

  Yes Yes Infrag 60

  Infrag Yes Yes 99

  Ad hocg No. 18 Yes

  Yes Yes Infrag 78

  List of favorite networks: 1 item (s)

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Defined by group policy: No.

  Connect even if the network is not broadcasting: No.

  Connectable: Yes

  
  

  Information for the login ID 9

  Connection started: 2010-11-30 14:12:24-133

  Auto Configuration ID: 9

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-ee-a0

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: Machine or user

  EAP type: authentication not started

  Number of 802. 1 X restarts: 1

  Number of failures of 802,1: 0 X

  802.1 x status: success

  Key exchange initiated: Yes

  Received unicast key: Yes

  Received multicast key: Yes

  Number of security packets received: 9

  Number of security packets sent: 7

  Decision of the attempt: success

  Connectivity

  Package statistics

  NDIS Rx: 1725

  NDIS Tx: 0

  Unicast decrypt success: 1

  Multicast decrypt success: 0

  Unicast decrypt failure: 0

  Multicast decrypt failure: 0

  Rx success: 1531

  Rx failure: 0

  TX success: 5

  TX failure: 0

  Try TX: 0

  TX retry number: 0

  Life expectancy exceeded TX maximum: 0

  Failure of TX ACK: 0

  History of roaming: 0 item (s)

  
  

  Information for Auto 8 Configuration ID.

  
  

  List of visible networks: 1 item (s) total, 1 article (s) poster

  Type BSS PHYSecurity Signal (RSSI) Compatible SSID

  ------------------------------------------------------------------------------

  Yes Yes Infrag 80

  List of favorite networks: 1 item (s)

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Defined by group policy: No.

  Connect even if the network is not broadcasting: No.

  Connectable: Yes

  
  

  Information for the login ID 8

  Connection started: 2010-11-30 12:56:40-041

  Auto Configuration ID: 8

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-f0-20

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: Machine or user

  EAP type: authentication not started

  Restart of number of 802. 1 X: 2

  Number of failures of 802,1: 0 X

  802.1 x status: success

  Key exchange initiated: Yes

  Received unicast key: Yes

  Received multicast key: Yes

  Number of security packets received: 13

  Number of security packets sent: 11

  Decision of the attempt: success

  Connectivity

  Package statistics

  NDIS Rx: 0

  NDIS Tx: 0

  Unicast decrypt success: 1

  Multicast decrypt success: 0

  Unicast decrypt failure: 0

  Multicast decrypt failure: 0

  Rx success: 2262

  Rx failure: 0

  TX success: 59

  TX failure: 0

  Try TX: 19

  TX retry multiples: 5

  Life expectancy exceeded TX maximum: 0

  TX ACK failure: 26

  History of roaming: 1 item (s)

  Schedule: 2010-11-30 12:57:48-302

  Roamed from BSSID: 00-13-1a-3b-fa-f0

  Reason: 0 x 00000003

  Disconnected from BSSID: 00-00-00-00-00-00 reason: 0 x 00000205

  
  

  Information for Automatic Configuration 7 ID.

  
  

  List of visible networks: 1 item (s) total, 1 article (s) poster

  Type BSS PHYSecurity Signal (RSSI) Compatible SSID

  ------------------------------------------------------------------------------

  Infrag Yes Yes 99

  List of favorite networks: 1 item (s)

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Defined by group policy: No.

  Connect even if the network is not broadcasting: No.

  Connectable: No.

  Reason: 0 x 00028002

  
  

  Information for the login ID 7

  Connection started: 2010-11-30 12:55:47-670

  Auto Configuration ID: 7

  Profile:

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-fa-f0

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: Machine or user

  EAP type: authentication not started

  Number of 802. 1 X restarts: 1

  Number of failures of 802,1: 0 X

  802.1 x status: success

  Key exchange initiated: Yes

  Received unicast key: Yes

  Received multicast key: Yes

  Number of security packets received: 13

  Number of security packets sent: 11

  Decision of the attempt: success

  Connectivity

  Package statistics

  NDIS Rx: 0

  NDIS Tx: 0

  Unicast decrypt success: 3

  Multicast decrypt success: 0

  Unicast decrypt failure: 0

  Multicast decrypt failure: 0

  Rx success: 288

  Rx failure: 0

  TX success: 49

  TX failure: 0

  Try TX: 19

  TX retry multiples: 5

  Life expectancy exceeded TX maximum: 0

  TX ACK failure: 28

  History of roaming: 1 item (s)

  Schedule: 2010-11-30 12:56:36-732

  Roamed from BSSID: 00-00-00-00-00-00

  Reason: 0 x 00000007

  Disconnected from BSSID: 00-00-00-00-00-00 reason: 0 x 00000205

  
  

  Information for the login ID 6

  Connection started: 2010-11-30 12:55:38-275

  Auto Configuration ID: 7

  Profile: Discovery connection

  SSID:

  SSID length: 10

  Connection mode: Infra

  Security: Yes

  Pre-Association and Association

  The parameters of connectivity provided by hardware manufacturer (IHV): No.

  Security settings provided by hardware manufacturer (IHV): No.

  Profile matches network requirements: success

  Pre-association status: success

  The Association status: success

  Last AP: 00-13-1a-3b-f0-20

  Security and authentication

  Configured security type: open

  Configured encryption type: WEP

  802.1 x protocol: Yes

  Authentication mode: disabled (5)

  Restart of number of 802. 1 X: 3

  Number of failures of X 802,1: 1

  802.1 x status: failure 0 x 00000000

  802.1 x reason code: 0 x 00050006

  Key exchange initiated: No.

  Number of security packets received: 8

  Number of security packe

  Diagnostic information (wireless connectivity)
  Details on the diagnosis of wireless connectivity:

  
  

  For all the info on this session, see the event information of wireless connectivity.

  
  

  Helper class: Auto-Configuration

  Initialize status: success

  
  

  Information for a diagnosis of connection

  The GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4

  Interface name: Intel(r) WiFi Link 5300 AGN

  Interface type: Native WiFi

  
  

  Result of diagnosis: there may be problem

  
  

  Diagnostic information (wireless network adapter)

  Details on the diagnosis of wireless network adapter:

  
  

  For all the info on this session, see the event information of wireless connectivity.

  
  

  Helper class: Native WiFi MSM

  Initialize status: success
  
  
  Information for a diagnosis of connection
  The GUID of the interface: e3f4016b-a75e-4d88-96ba-8bd3f26f0fb4
  Interface name: Intel(r) WiFi Link 5300 AGN
  Interface type: Native WiFi
  Profile:
  SSID:
  SSID length: 10
  Connection mode: Infra
  Security: Yes
  Connect even if the network is not broadcasting: No.
  
  
  Result of diagnosis: there may be problem
  ----------------------------------------------------------------------------------------------------
  
  
  That's about all.  If anyone can provide any indication as to why it would suddenly stop working, I would appreciate the help to solve this problem.
  
  Ido
  
  

  Ido Dubrawsky,

  Thank you for visiting Microsoft Answers!

  The question you have posted is related to networking in a commercial environment and would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:
  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Wireless network does not work on Satellite A305-S6898

  Hi all

  I just wanted to know why my wireless device doesn't work anymore. There for awhile he last internet connection detection.
  Would it be a malfunction of the pilot or something else?

  Thanks in advance for any assistance.

  Hello

  > . Would it be a malfunction of the pilot or something else?

  Yes, it can be. First of all, download driver Wlan:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  If this does not resolve your problem, we will think what to do next...

• Wireless network does not work properly on Equium A100-549

  I've tried so far with/without WPA PSK TKIP, WEP, OPEN, dynamic and static address, ipconfig/all configure TCP/IP manually and automatically updated drivers, all windows updates. I also tried with or without mac filtering.

  I install a good USB dongle known and tried all the foregoing the same I can instantly find the network cut and paste the password or type it in, it find instantly and the other around the street, but could not connect wireless connections, the icon in the task bar permanently a red x.

  If I can connect to the network I can put everything up. I have an XP, Office XP laptop and Vista DESKTOP base everything on laptop wireless WIFI on board, to an office on a dongle and the other with a PCI x 16 WI - FI card. on the laptop problem when you right-click the icon under display all connections, the status option is also low lit (can not select).
  It's like the driver is bad even if tosiba website says it's the right one to download when you fill out the form online, when you are looking there Web site for pilots.
  It's really annoying.

  Hello

  Satellite A100-549 PSAA4E was delivered with Atheros 11 b/g wireless network card.
  In this case the Atheros WLan client utility should be preinstalled on this OS.
  I advise to use this tool to configure WLan settings.

  In addition the wireless network card has been configured and set WLan channel 11. Please check if your router has been also on channel 11!

  I assume you are using the image of preinstalled Toshiba.
  This image contains the right WLan driver and usually the new installation is not necessary but if you are lloking for the new WLan driver I would recommend take a look here on this Toshiba WLan Center Portal:
  http://APS2.toshiba-tro.de/WLAN/

  Good bye