Problems syncing after more recent updates

Similar Questions

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• Computer Touchsmart 520: touchsmart 520 pc restarts after the recent update

  After a recent update to the stop, when I restart my computer, it crashes on the initial screen of blue with the hp logo. I hit the button esc several times to enter setup and nothing happens. What can I do to possibly enter safe mode and restore my system to the way it was before the recent update?

  Hi there @kencl65,

  That the Forums are with you!  I understand that you are unable to start your system correctly after a recent Windows Update.  I'm happy to give you a helping hand with this.

  Please see this document which has a process, you can follow this s cover the situation of departure and suspended at the HP Logo: HP - computer desktop PC won't start not (Windows 10.8), as well as covers of system restore and recovery.

  Please let me know if it works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• Is it possible to restore the realization of streak of moving after the recent update of watch?

  Is it possible to restore the realization "streak more long movement" after the recent update of watch (v2.2)?   I had a streak of 44 moving goes when I updated the watch (04/04/16).  After the update, although I continue to exceed my goal of moving, I no longer get the prize for the longest series of moving.  Data are always available in the watch (I can see all complete circles).

  Hello

  While it may be that for any other achievements being credited, may be useful for the future allocation of achievements to close open applications on your iPhone and then restart your iPhone and your watch:

  • To close open applications on your iPhone: click twice on the Home button, and then drag upward on each preview of the app.
  • Both devices turn off together, and then restart your iPhone first:
    • To turn off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off.
    • To reactivate: press and hold the side button until you see the Apple logo.

• Help! MicrosoftOffice 2011 cannot open the files after the recent update

  After the recent update (security 2015-006, Mac OS 10.10.5, Yosemite), I can longer open all files in Microsoft Excel or Word.

  When I tried to open the files in the "Open recent" list, Excel reports "Excel cannot open the workbook. The file name or path contains invalid characters (for example, /). "Same error message appears when I go into the folder and open the file in Excel.

  When I tried to open an existing file of the word, he pointed out that "this is not a valid file name.

  PS: Please do not suggest you use everything as your other favorite programs.

  Click the folder just below the recent and see if documents are on my Mac. Additionally, click on a reader-Documents-then the file name and see if the same thing happens. I downloaded the update of security on the App Store and have no problem. Also, in your menu bar, go to help in the Office applications and updates. An Office 2016 update was released last Friday, December 11.

• Responsive touchpad, after a recent update

  I use a mouse wireless and disabled my touchpad.  After a recent update, re-enable the touchpad and I do not see how to turn it off again ('disable' is in greyscreen; all devices work properly, depending on the computer).  It will be a bad idea to uninstall the touchpad?  I would like the touchpad do not work when the transmitter of the mouse is connected and be available when mouse battery died.

  Hello

  1. what operating system is installed on the computer?

  2. the updates have been installed on the computer?

  3. What is the brand and model of the computer?

  Method 1: I suggest to update the touchpad drivers and then try to disable it in Device Manager.

  (a) click Start.

  (b) in the start search box type devmgmt.msc, and then on enter.

  (c) in Device Manager, expand mice and other pointing devices and locate the touchpad.

  (d) right click on the touchpad and update the driver.

  Method 2: If the problem persists then I suggest you to remove an update and check to see if the same problem happens: remove an update: http://windows.microsoft.com/en-US/windows7/Remove-an-update

  Note: To enhance the security and performance of your computer, it is recommended to remove the updates.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Open Office works after the recent update

  Open office

  I use Open office, but after a recent update it doesn't seem to work... Any suggestion that could help me solve the problem...

  The latest version of OpenOffice is 3.3.0. If your own copy is out of date, maybe it's time to get the latest version.

  Other concerns can be better directed to the OpenOffice community in their area of support here.

• Extremely slow after the recent updates.

  Nice day!

  After a recent update, my computer starts extremely slow for example, a file transfer time to initialize very low speed. No hardware changes have been made, and everything was in tact. The CPU usage is very low, but the computer does not respond, what the hell. Initially the system would be stuck on windows startup, but I waited until what he actually started upward because it usually takes less than 2 minutes to start. I tried system restore to restore to before the updates were installed and it worked! I wanted to just know how can I find out what update caused the problem or do I stop updating?

  Windows 7 Ultimate 64 bit SP1
  See you soon!

  Andrew

  Install all a test for signs of the back problem, you go. When you have identified the problem update and then use the correct way to remove the update or select Start, Control Panel, programs and features, see installed updates and follow the instructions under uninstall an update.

• After the recent update of Win7, computer will not remain in hibernation

  After a recent update of Windows (probably to fix something else), my computer refused to stay in hibernation.
  This is a 64 bit machine running Win7 Pro, and he wakes up now randomly after going into hibernation.
  I tried using 'powercfg' to see what is wake it up - no result.
  I tried to use 'powercfg' to deny the mouse and network which apparently have permission to wake up-no result.
  I unplugged the mouse in case there is a vibration of the earthquakes to chance - no result
  I unplugged the cable to the router in case there is a stray signal from on the internet - no result
  I went into the "Network properties" window and turned off all the "wake up" properties - no result.
  I looked at similar questions on this forum and checked "of performance issues" in the Panel as not advised - no problems to report.

  OK - what makes the Microsoft with a recent update to cause this problem and when they're going to cancel it?

  Hello

  Try the following and see if it helps.

  Method 1:

  I suggest you to check the update history to discover the updates installed by following the link:
  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  
  Method 2:

  I suggest you perform a clean boot and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135
  Note: once you have completed troubleshooting, perform the steps from step 7: to reset the computer as usual.

  Method 3:

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  Reference: (why doesn't my computer go to standby or hibernate as expected, or why it suddenly wake?) from the following link.
  Sleep and extended: frequently asked questions: http://windows.microsoft.com/is-IS/windows7/Sleep-and-hibernation-frequently-asked-questions

  How to disable and re-enable hibernation on a computer that is running Windows: http://support.microsoft.com/kb/920730

  Note: If you still have the problem then I suggest you to perform a system restore to a point when the computer was working fine.

  System Restore: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

• Renderer missing after the recent update

  Hello

  I use Adobe CS5 on a 64-bit computer to Windows 7 with 12 GB of RAM. Even though I have a Quadro CX. the CS5 first complains that he cannot use the Mercury Playback Engine the GPU acceleration. It happened after the recent update to CS5. I checked the contents of the cuda_supported_cards.txt file and there seems to be no problem at all. I'm lost. Any kind of help will be appreciated.

  

  Try to update your video card driver.

• After the recent update to iTunes, my computer is not recognized in iTunes game.

  After the recent update to iTunes, my computer is not recognized in iTunes game.  I am subscribed to iTunes game. My library shows the status of iCloud, and yet when I go into the Match iTunes from the iTunes store, it asks if I want to add this computer.  When I connect and ask the computer to add, nothing happens.  Shouldn't iTunes recognize my that my computer is a Subscriber?

  Hello

  Connect to iTunes. Go to Menu > iTunes > Preferences > general and make iCloud sure music library is checked.

  Jim

• After having recently updated windows, some programs no longer work. In addition, System Restore does not work.

  After having recently updated windows, some programs no longer work.  Also, when I went to do a system restore, that he would not allow me to restore to an earlier date.  Among the programs that no longer work are VLC Media player, ieploxer, f.lux.  Even though I have uninstalled and reinstalled they would not load correctly.  I would get the splash screen for the program, but noting else.  When I am gone in Windows Task Manager the program would not appear in Applications, but there are processes running.  And an interesting thing, the exe afficheraient use of the 72K memory.  Still, even for different programs.

  What can I do?

  Start the command prompt, and then type

  sfc/scannow

  Do check and see what the result is.

  Also run full system scan with:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

• In Windows Mail, after a recent update, I am unable to open a mail directly from my Inbox.

  original title: windows mail user

  user of Windows Messaging after a recent update of Windows, I am unable to open a mail directly from my box in. When I try to open an individual e-mail, the description line fall to the toolbar. Then I have to right click and hit the max selection to open the full screen of my message when I hit the answer, mail electronic message colaspees to the toolbar and I have to repeat the process above... What do I do?

  What is happening is that the window open off-screen.

  For Vista and earlier versions of Windows:

  Right-click on the tab of the window in the task bar and select move. Now, use the arrow keys to get to the screen. Close all other windows except this one and use the cursor to drag the message to the desired size. File | Output and Windows will remember the size and location when you open it again.

  For Windows 7:

  How can I move a window off the screen in Windows 7?
  http://ask-Leo.com/how_do_i_move_an_offscreen_window_in_windows_7.html

• After a recent update, the bookmarks menu has an extra folder called "All bookmarks" which seems to be a copy of the bookmarks. It is at the origin of the problems and how to fix it?

  I've recently updated Firefox. The bookmarks menu has a new menu item called "all bookmarks". It seems to be a true copy of the bookmarks. When I try to add a new bookmark, all bookmarks folder is the one indicated in the dialog box. I tried to delete the folder all the bookmarks, but then nothing is displayed in the dialog box when I try to add a new bookmark.

  If I add a new bookmark, it is placed in the folder all bookmarks and does not appear in the top level element that I want it in virtue. Any ideas on what I can do to solve this problem.

  The update went normally without my intervention.

  Thank you

  This may be a problem with the places.sqlite file that stores the bookmarks and history.

  • http://KB.mozillazine.org/Locked_or_damaged_places.SQLite

• Japanese text replaced by boxes after the recent update of Windows

  Windows 7 can not represent the Japanese text after that Windows Update - changes the text boxes - applies to all applications - itunes, Windows Live Mail - mail header text replaced by boxes. The emails themselves are not affected - Japanese content can be displayed. Made a restoration and Japanese text returned. However then windows update again and the Japanese text has been lost, which means that this issue is one of the updates.

  Hi HiniKuru,

  Allows us to try to understand the problem causing the update.

  Install the updates, if the problem persists

  You can try to change the display language for the Japanese, follow these steps:

  1. click Startand type change display language in the box start the search .

  2. click on view change of language.

  3. in the drop-down list that appears, select the language (Japanese) that you want, and then click OK.

  Now, check if the problem is resolved, if the problem persists

  Follow the steps mentioned in the link below

  Windows 7 language packs are available for computers that are running Windows 7 ultimate or Windows 7 Enterprise

  http://support.Microsoft.com/kb/972813

  Uninstall the most recently installed update until find you the problem causing the update:

  1. click on start to reduce this includes this image, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the list of programs . Collapse this includes this image if you are prompted for an administrator password or a confirmation, type the password or click continue.

  2. click on view installed updates.

  3. click on recent update (go by the date) that you want to uninstall, and then click Uninstall.
  Follow the instructions that appear on the screen to complete the uninstall process.

  Note: It is not recommended to uninstall an update; We try the following steps to understand the problem causing the update. Uninstall an update at the same time, restart the computer each time and check if the problem persists.

  Let us know the problem causing the update (make a note the number of KB) and let us know for further investigation

  For more information, see the link below

  http://blogs.msdn.com/E7/archive/2009/07/07/engineering-Windows-7-for-a-global-market.aspx

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.