Problems to get my Vista PC to connect with my Xbox 360 with an ics connection.

Similar Questions

• Where can I get the power sources and accessories for the Xbox 360 in India?

  XBox360 power supply model: NHPD-186DB a 110-240 v / 203W

  Hello

  Microsoft - India
  http://www.Microsoft.com/en-in/default.aspx

  XBox - India
  http://www.Xbox.com/en-in

  XBox - India - support
  http://support.Xbox.com/en-us/?XR=shellnav

  Major retailers in the region may also be able to help.

  ========================================================

  These are the resources of the United States and it should be similar for Microsoft India.

  XBox - Support<-- best="">
  http://support.Xbox.com/en-us/pages/default.aspx

  XBox - Contact us (support)<-- best="">
  http://support.Xbox.com/en-us/contact-us

  XBox - Support Forums - and my XBox (top-right)<-- might="" be="" some="" good="" information="">
  http://forums.Xbox.com/

  Xbox technical support phone number

  • Toll-free: (800) 4MY-XBOX or (800) 469-9269

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Windows Vista Media Extender and xbox 360 connection problem

  I get the following error message when you try to connect my xbox 360 to my PC to vista through the Windows Media Center extension
  Connection complete

  The Xbox 360 has been disconnected because an application has launched unexpectedly UI. You want to reconnect?

  I followed all the steps of your forums that are supposed to resolve these issues, but he continues to be. What can I do to fix this?

  Hi Snufferum,

  Thanks for posting on answers.com.

  First, disable the program anti-virus or firewall that runs on your computer and check if the problem persists.

  Note: because some anti-virus software will cause conflicts between unexpected applications, please temporarily disable any antivirus, firewall or anti-spam on your computer programs.

  This problem occurs if the floating language bar is enabled on the Windows Vista-based Media Center computer. This configuration closes the connection between the Media Center Extender and the Media Center PC.

  To resolve this problem, change the settings of the Media Center Extender language bar. To do this, follow these steps.

  Step 1: Configuring settings on the Windows Vista - based Media Center computer

  1. Click Start , type intl.cpl in the Start Search box and press ENTER.
  2. On the keyboards and languages tab, click Change keyboards .
  3. On the Language bar tab, click docked in the taskbar under options from the language bar .
  4. Click OK .
  5. On the administration tab, click copy to reserved accounts .

  If you are prompted for an administrator password or for confirmation, type the password, or click continue .

  1. Click on the checkbox by default (new users) user account , and then click OK twice.
  2. Click Start and then click Windows Media Center .
  3. Click tasks , and then click settings .
  4. Click Extender , and then on the Xbox 360.
  5. Click Uninstall , and then close Windows Media Center.

  Step 2: Configuring the settings of the Xbox 360 console

  1. In the System of the Xbox interface section, select computers .
  2. Select Windows Media Center , and then press the A button.
  3. Select Disconnect .
  4. Press the B button repeatedly until you return to the System section.
  5. In the media of the Xbox interface section, select Media Center .
  6. Advance in the instructions on the screen to get the 8-digit setup key.
  7. Note the setup button.

  Step 3: Configuring the settings on the Windows Vista - based Media Center computer

  1. Click Start and then click Windows Media Center .
  2. Click tasks , and then click add extender .
  3. Click Next and enter the 8-digit setup key you obtained media of the Xbox interface section.
  4. Follow the prompts to complete setup of Windows Media Extender.

  When you copy these settings for reserve accounts in the 1st step, you change the settings of language bar for all new users that are created on the Media Center computer. After you add the Windows Media Extender, you can reverse these changes so that all new users will have a floating language bar. To do this, follow these steps on the Windows Vista-based Media Center computer:

  1. Click Start , type intl.cpl in the Start Search box and press ENTER.
  2. On the keyboards and languages tab, click Change keyboards .
  3. On the Language bar tab, click floating on the desktop under the language bar options .
  4. Click OK .
  5. On the administration tab, click copy to reserved accounts .

  If you are prompted for an administrator password or for confirmation, type the password, or click continue .

  1. Click on the checkbox by default (new users) user account , and then click OK twice.

  You can go through the article below:
  http://support.Microsoft.com/kb/934542

  While trying to use your Xbox 360 as a Media Center Extender console, you receive the error message: "Setup error".

  http://support.Microsoft.com/kb/932342

  This article should help you work on problems you encounter while trying to connect to the Xbox 360 and Windows Vista.

  Connect your Xbox 360 to Windows Media Center

  http://www.Microsoft.com/Windows/products/winfamily/mediacenter/Xbox360.mspx

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder.

  Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder. When you right click on the connection of customer created, click Properties, it says "connect using the Modem.

  Is it a registry problem or what? How can I fix?

  original title: PPPOE connection problem

  Hello

  1. you connect using a cable or DSL modem?

  2. did you ever get this working before that?

  3. are you connected to a domain?

  4 are you running Vista in a virtual environment?

  You doing appeared in this link to create the PPPOE connection:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-PPPoE-connection-to-the-Internet

  Thank you

• When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

  problems of the DRC of vista for windows machine 7

  I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

  can someone shed light on this please?

  Hello

  Temporarily disable the security software on both computers and check if it makes a difference.

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

• whenever I try to connect to the internet (mozilla firfox) it says I have to buy vista security 2011 to clean my laptop. How can I get rid of this to connect online

  whenever I try to connect to the internet (mozilla firfox) it says I have to buy vista security 2011 to clean my laptop. How can I get rid of this to connect online

  Hello

  these rogue program names belong to a type of malware using different names but producing the same results

  Read and follow the EXACT at the below link removal instructions

  Read this information

  Vista anti-virus 2011, Vista Total Security 2011, Win 7 Home Security and include some of the names by a rogue new name change randomly to settle on the victim's computer.  When this particular rogue is installed, it will install as a variety of names in different programs, with each having their own graphical user interface according to the version of Windows running on the computer. Whatever the name, however, they are all the same exact program with just a different name and skin on this subject. This rogue goes by many names in different programs, of which I have listed below depending on the version of Windows that is installed on:

  Windows XP rogue names	Names of Windows Vista Rogue	Windows 7 fake names
  XP Antivirus	Vista anti-virus	Win 7 antivirus
  XP Antivirus 2011	Vista anti-virus 2011	Win 7 anti-virus 2011
  XP Anti-Spyware	Vista Anti-Spyware	Win 7 AntiSpyware
  XP Antispyware 2011	Vista Antispyware 2011	Win 7 antispyware 2011
  XP Home Security	Vista Home Security	Win 7 Home Security
  XP Security 2011 Home	Vista Security 2011 Home	Win 7 Security 2011 Home
  XP Total Security	Vista Total Security	Win 7 Security Total
  XP Security 2011 Total	Vista Total Security 2011	Win 7 Security 2011 Total
  XP security	Vista security	Win 7 Security
  XP security 2011	Vista Security 2011	Win 7 Security 2011
  XP Internet Security	Vista Internet Security	Win 7 Internet Security
  XP Internet Security 2011	Vista Internet Security 2011	Win 7 Internet Security 2011

  Follow the EXACT below removal instructions

  http://www.bleepingcomputer.com/virus-removal/remove-win-7-Internet-Security-2011

• Problems connecting Xbox 360 to computer vista laptop via ethernet connection to the network local (the laptop is connected via wifi)

  I spent a few hours trying to solve this problem, and I've been to countless forums.  They all told me to go into "Manage network connections" and right-click-properties on my connection Wi - fi.  Then they speak by clicking on the tab sharing... which I did not.  I don't know how to share my connection to the WiFi with my xbox 360.  It is supposed to be easy, but I can't realize what is designed as "highly probable."  I have a laptop Sony Vaio VGN-FW390 and Vista Home Premium. Maybe I have to set up a connection to an access point, or do a sort of thing ICS... I do not know.  I am incredibly annoyed by this, and I'd appreciate any help.  Thank you.

  Messier,
  Thank you for visiting the Microsoft Answers community forum.

  Try this and see if it works for you, it has worked for some users.
  With no cable connected between the computer and the xbox, go to control panel, network and sharing Center. You should see a "Local Area Connection", which will show disabled at this stage, and your "wireless network connection", which should show connected. Connect the ethernet cable to your laptop and the back of the xbox. Select the 'connection to the Local network. After that it is well connected, disable your 'Wireless Network Connection'. Once disabled, right click and click Properties. Go to the Advanced tab and check "allow other users of the network to connect through this computer's internet connection". Once this is done, your wireless internet connection should say shared next to the State of the connection.
  Turn on your wireless connection. Then, right click to 'connect to the Local network' and click on repair. Allow the end. test the connection on your xbox.

  Let us know how that works for you.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Printing problems - I get the sizes of evil when I print from LR 5.5. on my Epson 3880 printer. USB connection. Reinstalled printer driver - not. Want to obey my print settings. What can be wrong?

  Printing problems - I get the sizes of evil when I print from LR 5.5. on my Epson 3880 printer. USB connection. Reinstalled printer driver - not. Want to obey my print settings. What can be wrong?

  I am not familiar with these communities - not provide Adobe and LR all direct support?

  You bet it's your page layout. As I said, the Epson driver has many offers for the same size paper. In addition, do NOT use Auto expand in this selection.

• I have a problem with 'url not valid and cannot be loaded' also the site accuweather on my toolbar does not load, all I get is a sying note "connection error". The google homepage, I've always used is empty at the start of firefox.

  I had a problem where firefox crashed while the closing bbc iplayer site last night, I reebooted firefox and everything seemed in order until this morning. I cannot use the default Web page of google but you can use the uk version. When you try to solve the problem I get the "invalid message url."

  • "Clear the Cache": Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.
  • 'Delete Cookies' of sites that cause problems: Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Solve problems with plugins like Flash or Java to solve the common problems of Firefox

• Network Vista and XP - connection to the network printer problem

  I try to print to a network printer connected to a vista from a computer xp machine

  Two computers on a network
  Vista machine is connected through the ethernet card and has a connected printer
  XP machine is via wireless network

  Both machines have the same network name "mshome".
  Open ports on the firewall and also left Software Firewall

  When I print a job, I see it be wound on the info from the printer on both machines, but then, it is automatically deleted.

  I am able to access the hard disks from two computers

  The printer works this way, when you share a printer between XP and Vista where the printer is connected to Vista, XP will communicate with the printer and its drivers Vista.

  So as I suspected it was due from pilots, in your case XP will be offered 64 bit readers which it does not recognize

  If we rely on the printer connected to the Vista 64-bit operating system operating system 32-bit, we need to install the additional drivers (especially the XP must be with 32 bits, only 32 bits of the operating system will not show if it's 32-bit or 64-bit)

  So in this case, you must right click on the printer on Vista and go to the sharing tab, and then click additional drivers, it will be the operating system and Version to select and you will need to select Windows XP x 86 and install the drivers

  Now your Vista will be the 32-bit and 64-bit drivers installed. Now, when you share the printer, when the Contacts XP Vista, Vista has drivers and it will be able to share the printer correctly. Anish

• Satellite L40: Windows Vista unable to connect to the network

  My Satellite L40 laptop was connecting to my network wireless perfectly since Christmas. But two days ago, it stopped! I can see the networks available on the laptop but when I try to connect I get the message "Windows cannot connect to the network. Following the link to "Diagnose the problem" has no useful effect.
  I installed Windows Vista Service Pack 1 yesterday to try to solve the problem, but always without success.

  Any advice would be appreciated.

  Select this option.

  Hello

  Please go to the drivers Toshiba download page and download the latest Wlan driver for your wireless card installed, then remove the old driver and install a new one. It should work.

  Otherwise, you should try to recover your entire system and replace the drivers installed by some more recent...

  Welcome them

• Satellite L350 - Vista loses internet connection

  Hi all

  From time to time (in fact quite often), I lose my connection to the internet
  Problem appears as follows:

  I run for example Outlook, Firefox (2 or 3 tabs) and Skype
  As soon as I have a Skype conference while surfing a few pages, my connection is broken for a short period...
  Firefox can't open or sites Web support and Skype is down for a few seconds...

  It is the first time when using this laptop with vista installed!
  My other laptop (Toshiba too but with WXP) doesn't have this problem!

  My connection is LAN and 6000 MB Wireless

  I just want you to:
  My laptop WXP works well enough (for years)
  The problem now appears under Vista...

  I like to keep Vista...

  Please get back to me!

  In your case, I'll try to update the BIOS and the driver WLAN. The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In addition, you must turn off the power save in Vista the WLAN card. This document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  Last but not least make sure that you use the same standard WiFi router. For example, 802. 11 b, g,

• Computer Vista laptop cannot connect to new wireless router

  I had the laptop for about a year and a half, and he has a history of being pretty skittish about the wireless connection.  Often he simply refuses to do so.  During vacation last year, for example, the other three laptops connected family easily to wi - fi hotel, but mine has refused to.  There are a lot of other moments when the laptop could not connect, but I was able to connect to two most important places - home and work - without much trouble, and so I haven't looked too hard to solve the problems of connection up to now.

  This week, I replaced the router in my original configuration.  The old Netgear router kept giving up the connection between her and my ISP.  The new Linksys router looks rock solid in this regard.  I have a desktop running XP computer that is wired to the new router Linksys, and he sees the internet very well.  My laptop Vista unable to connect (wireless), however.  He sees the network with a lot of intensity of the signal, and it tries to connect.  I get a message saying that the connection takes longer than usual, and then another message saying 'connected.'  However, I do not have internet access, and I see other devices (just the XP desktop, really) on the network.  The Network and Sharing Center shows my laptop connected to the 'unidentified network', and then there is a red X between this network and the Internet (represented by a grey globe).  Laptop computer signals its 'access' as "local only".

  From the desktop, I can access the internet, so the router is connected to the points upstream.  From the desktop, I can also access the router configuration pages, and I see that it does not list the laptop as a dhcp client, even if the laptop thinks that it is connected.

  ipconfig on laptop computer displays a wacky IPv4 address: 169.254.2.91 and I guess that the laptop does not get an address passed to the router.  I think that there should be a 192.168. *. * address if it worked properly.

  Now, I was pretty sure my laptop's wireless adapter to work properly.  It always connects to the old router and it always connects to the work.  But to be sure and really test the new router, I went out and bought another USB adapter wireless.  When I plug it into the computer to Office XP, the Office connects to the router and can see the internet (even with the connection cable is disconnected).  So the new router and the new wireless USB adapater properly.  When I plug the USB wireless adapter into the laptop, the laptop still can't connect and still not get a good ip address assigned by the router.

  I've been at this for a few days now, and I could really use some help.  I read a few items in the Microsoft forums that was supposed to fix the problem.  One of them told me to try to start a program called DHCP in the Administrative Tools folder.  I do not have this program on my computer.  Another told me manually change my registry (ouch!) and add a new DWORD value, and set its value to 1.  I did, but it did not fix the problem.

  I would be very grateful for any help.

  Jim

  Alright.  I am home to work and back again.  I have read several posts with people reporting problems similar to mine, so I guess I'm not alone in this.  In a thread, the experts proposed to start in Mode safe mode with networking.  So I gave that a shot.  I still couldn't really connect - just this 'local only' without an assigned IP address.

  One thing I did notice, is that my laptop brand and its wireless adapter seem to get a special mention in most positions.  I have a HP Compaq Presario CQ50 Notebook PC running Vista Home Premium SP2, 32-bit version (even if the processor is 64-bit).  The wireless adapter is an Atheros AR5007.  Several other people with this card have reported problems.  Maybe it's the cause?

  I look into updating the driver for the card, even if yesterday's test with the separate USB wireless adapter showed that the problem could not just be limited to the Atheros card.  To search for a driver update, I connect my laptop to the router with an ethernet cable.  It's nice to see the web on your laptop.  No update driver does.

  For fun, I try to establish a wireless connection with the router, while the wired connection is still in place.  Looks like maybe it worked?  I say a little prayer and unplug the ethernet cable...

  It's a miracle!  I have a wireless connection to the router and beyond, to the internet.  Huzzah!

  The network has a real name, too, instead of just 'unidentified network '.  I want to change the network type from the public to the private, which I was unable to do while he was still 'unidentified '.

  Can I terminate the connection so that I can see what happens when I try to reconnect.

  Another miracle!  It connects to and still see the internet.  Callooh!  Colay!

  Next test: see what happens after a reboot... (please, please, please)...

  Ch-ching!  It works again!

  Final (?) test: reinstall the McAffee internet security suite and restart.

  And it still works.

  Here's a recap of what I found:
  1. laptop could not connect wireless router again, despite dozens of attempts in which I get every available straw
  2. laptop computer could see the internet when connected to the router
  3. laptop could connect wirelessly to the router while the wired connection is in place
  4. Once this first wireless, laptop computer was able to connect to the router even when the wired connection has been removed and the computer restarts

  I would describe my discovery above as a work-around rather than as a solution, however.  It does not always help me stay connected the next time I'm on vacation, for example.  But perhaps the information I provided can help experts to diagnose the real problem a little.

  I look forward to hear something back.

  Jim

• Windows media center xbox 360 connection problem

  Hi, this is the message shown on the screen:

  "Connection completed. The xbox 360 has been disconnected because and request launched unexpectedly UI. You want to reconnect? »

  This occurs when WMC tries to connect with the Extender Setup. I followed all the steps to configure the Extender according to the microsoft Web site. But something does not work. HELP Please!

  Hi Riclop,

  Thanks for posting on answers.com.

  First, disable the program anti-virus or firewall that runs on your computer and check if the problem persists.

  Note: because some anti-virus software will cause conflicts between unexpected applications, please temporarily disable any antivirus, firewall or anti-spam on your computer programs.

  This problem occurs if the floating language bar is enabled on the Windows Vista-based Media Center computer. This configuration closes the connection between the Media Center Extender and the Media Center PC.

  To resolve this problem, change the settings of the Media Center Extender language bar. To do this, follow these steps.

  Step 1: Configuring settings on the Windows Vista - based Media Center computer

  1. Click Start , type intl.cpl in the Start Search box and press ENTER.
  2. On the keyboards and languages tab, click Change keyboards.
  3. On the Language bar tab, click docked in the taskbar under options from the language bar.
  4. Click OK.
  5. On the administration tab, click copy to reserved accounts.
     If you are prompted for an administrator password or for confirmation, type the password, or click continue.
  6. Click on the checkbox by default (new users) user account , and then click OK twice.
  7. Click Startand then click Windows Media Center.
  8. Click tasks, and then click settings.
  9. Click Extender, and then on the Xbox 360.
  10. Click Uninstall, and then close Windows Media Center.

  Step 2: Configuring the settings of the Xbox 360 console

  1. In the System of the Xbox interface section, select computers.
  2. Select Windows Media Center, and then press the A button.
  3. Select Disconnect.
  4. Press the B button repeatedly until you return to the System section.
  5. In the media of the Xbox interface section, select Media Center.
  6. Advance in the instructions on the screen to get the 8-digit setup key.
  7. Note the setup button.

  Step 3: Configuring the settings on the Windows Vista - based Media Center computer

  1. Click Start and then click Windows Media Center.
  2. Click tasks, and then click add extender.
  3. Click Nextand enter the 8-digit setup key you obtained media of the Xbox interface section.
  4. Follow the prompts to complete setup of Windows Media Extender.

  When you copy these settings for reserve accounts in the 1st step, you change the settings of language bar for all new users that are created on the Media Center computer. After you add the Windows Media Extender, you can reverse these changes so that all new users will have a floating language bar. To do this, follow these steps on the Windows Vista-based Media Center computer:

  1. Click Start , type intl.cpl in the Start Search box and press ENTER.
  2. On the keyboards and languages tab, click Change keyboards.
  3. On the Language bar tab, click floating on the desktop under the language bar options.
  4. Click OK.
  5. On the administration tab, click copy to reserved accounts.
      

     If you are prompted for an administrator password or for confirmation, type the password, or click continue.

  6. Click on the checkbox by default (new users) user account , and then click OK twice.

  You can go through the article below:
  http://support.Microsoft.com/kb/934542

  Kind regards

  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bluescreens Vista laptop with ndis.sys when I connect Xbox 360 via Ethernet

  I have a laptop with Windows Vista HPG5056EA. When I connect my Xbox 360 with an Ethernet cable, it bluescreens with the message:

  "DRIVER_IRQL_NOT_LESS_OR_EQUAL"... to it also States:

  ' * STOP: 0X000000D1 (0 X 00000200, 0X00000002, 0X00000000, 0X82D4CBA1).
  NDIS.sys - address 82D4CBA1 base at 82C7D000, DateStamp 479190e7 ".

  To do this, no bluescreen at any other time. only when I connect the Xbox 360 to it.

  I looked all over the internet and can safely rule out bad ram (as I changed it and the problem still happens).
  Others have said that it is to do with the Realtek network adapter that is installed. I've updated this to the last version of driver with no improvement.

  This problem has happened twice. The first was after installing some software Nero. I have uninstalled and rebooted and things were very good.

  The second time was after installing software Ashampoo. I removed that too and things were good again.

  This time, the only thing I installed before getting the blue screen is Microsoft Silverlight.  I uninstalled it but the blue screen issue continues.

  I tried to use system restore too but the problem remains.

  I tried to access the mini dump after the blue screen file, but the ' C:\Windows\Minidump\ folder is always empty, even if I choose 'partial memory (64 KB) image' in the "Write debugging information" parameters. "
  (Some have said that the issue of minidump could not have enough memory, so with my laptop with 2 GB of RAM, I put the pagefile 3072 and had at least 7 GB of hard disk free space but I don't always get the minidump file).

  If anyone can help with the blue screen I would be really really grateful that I no longer us Xbox Live.

  Features of the laptop:

  Windows Vista 32 bit
  RAM: 2GB
  Processor: Intel T2080 1.73Ghz (Dual Core)

  Thanks for your quick response. I had already tried most of what was suggested before you put this question up, without success.

  However, I apparently managed to fix the problem (for now at least) using Device Manager to completely uninstall the Realtek network adapter and remove the driver. I restarted the laptop after this and Windows reinstalled automatically and hay presto, no blue screen when connecting to the Xbox!

  I don't know if this is a permanent solution but if it starts to happen again, I'll try the same and let you know.

  Thanks again