Problems to use two scb-68 has the NI PXI-6225

Similar Questions

• Is it possible to use Dreamweaver with WordPress (has the classes by Joseph Lowery) only uses a test server AWS and not an environment local localhost?

  Is it possible to use Dreamweaver with WordPress (has the classes by Joseph Lowery) only uses a test server AWS and not an environment local localhost?

  Yes, I want to talk and EC2 instance and I am able to do Dreamweaver to easily connect using SFTP which I believe is a SSH protocol. See the image below. This method works.

  I currently have a test instance and will finally have an instance of production when the site is finished.

  Local environment is not installed on my workstation and my thought was that put it on the server would allow transparent operation including scripts on the server side. The testing station is not public.

  

• Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Is it possible to use two different computers with the same adobe - ID and the same adobe license?

  Hi Morten,

  Yes, you can have your subscription or your license installed on two different computers with the same adobe id, however use one at a time.

  Please let us know if you have any questions, more about it.

• CMD. EXE: IS IT POSSIBLE TO USE TWO COMMANDS INSIDE OF THE COMMAND CMD 'FOR '?

  HAY EVERYONE.
  I WROTE A PROGRAM TO CMD. EXE.
  AND I WANT TO SET A VARIABLE TO THE NUMBER OF FILES PRESENT IN A DIRECTORY.
  THE PROBLEM IS THAT I DON'T KNOW HOW TO USE THE TWO COMMANDS INSIDE OF THE COMMAND.
  HERE IS THE EXAMPLE OF MY PROBLEM INSIDE THE BAT FILE:

  OFF @ECHO
  FOR /F %%D IN (' DIR/W/D / N / L ' "C:\WINDOWS\SYSTEM32\*." ") DLL | TROUVER/C/I/N 'B' ') SET FILES_NUMBER = % Y
  ECHO: % FILES_NUMBER %
  BREAK
  OUTPUT

  I EXPECT THAT THIS PROGRAM WAS TELLING ME HOW MANY DLL FILES THAT BEGIN WITH THE LETTER B, I HAVE IN MY SYSTEM32 DIRECTORY.
  HOWEVER, THIS PROGRAM HAVE A MISTAKE DURING ORDERING.

  | WAS NOT PLANNED AT THIS TIME.

  "WHEN I USE IT JUST COMMAND DIR/W/D O:N: C ' C:\WINDOWS\SYSTEM32\*. "DLL" | " FIND/C/I/N "B" WITHOUT THE FOR ORDER THIS ORDER WRITE A NUMBER ON THE SCREEN. THE NUMBER OF DLL FILES THAT BEGIN WITH THE LETTER B IN MY SYSTEM32 DIRECTORY.
  IF THESE TWO COMMANDS (DIR AND FIND) COMBINED ALL WORK OK.

  BUT I WANT TO REDIRECT THE OUTPUT OF THESE COMMANDS IN A VARIABLE. FOR THIS I USE THE COMMAND FOR.

  WHEN I USE JUST A COMMAND INSIDE THE ORDER, HE DIDN'T THERE WAS NO ERROR.
  BUT WHEN I USE PIPES, A MISTAKE SE PRODUCT.

  SO, MY QUESTION IS: HOW TO USE TWO COMMANDS INSIDE OF COMMAND? OR HOW TO USE A PIPE TO COMMAND INSIDE.

  YBY

  A slightly different method, but will set the Files_Number variable to what you want:

  Off @Echo
  C:
  cd\Windows\System32
  Dir B *. DLL | FindStr.Exe 'File (s)' > Temp.Txt
  FOR /F "Tokens = 1-4" %% IN (Temp.Txt) Set Files_Number = %% a
  Echo number of records Files_Number is %

  Note: You can add a Temp.Txt DEL if you want, but it is not necessary because the > causes the replaced every time that you run this. (If we had used > as our redirector, it adds to the Temp.Txt file, which we don't want.)

  In addition, when you use the / w with the DIR command that calls the large format so you get 1 account per line regardless of the number of files has the letter B in them. Also, your search for the letter B in each line through FIND counted the Bs if they're the first letter.

  My method deliberately DIRs for only these DLLs that begins with the letter B. FindStr allows us to give us only the row that contains the number of files. In the FOR-IN-DO we know that this line will have four elements of the text, so we settled our chips to 1-4. They will be placed in temporary variables a, b, c & d.

  Given that the actual number of files, that's what we want, we have Files_Number = %% a.  Had we wanted to know the total number of bytes of the file, WE Set Total_Bytes = % c.

  You can do both if you want to do like this:

  Off @Echo
  C:
  cd\Windows\System32
  Dir B *. DLL | FindStr.Exe 'File (s)' > Temp.Txt
  FOR /F "Tokens = 1-4" %% IN (Temp.Txt) Set Files_Number = %% a
  FOR /F "Tokens = 1-4" %% IN (Temp.Txt) define Total_Bytes = %% c
  Echo number of records Files_Number is %
  Echo Total number of bytes is Total_Bytes % %

• Double desktop screen "stacked" on first office on a single monitor after using two monitors Netflix to the TV

  Double "stacked" on first desktop on one monitor - desktop screen came just after using two monitors (Netflix on TV extended

  My computer kept crashing after I had hung a dual monitor.  The second monitor was my television, playing a Netflix movie while I also used my computer to work on.  After splitting the two, I kept crashing for a few days.  I tried to delete the second monitor in the display settings, but does not know how to do this, if it's possible, but I think it's the problem and the cause of the double view of the desktop on my computer now.

  Does anyone know how to confirm what the problem is for some, and/or instructions how to solve this problem if you already know what can cause this problem.  No assistance at all would be greatly appreciated.  I tried to understand this two days...

  Note, in the heat of the Las Vegas area, I thought this may be due to overheating, but I actually he cooled in the refrigerator for a short time and restarted, but still have the problem.  Thank you.

  You have a Nvidia 8600 M GS graphics chip located on the motherboard, the drivers for it are provided by your manufacturer, HP, PC-specific to your model and NOT of the site MSUpdate or Nvidia.

  http://www.nvidia.com/object/notebook-Win7-WinVista-258.96-WHQL-driver.html see the following"However, please note that your notebook original equipment manufacturer (OEM) provides certified for your mobile drivers specific to their Web site. NVIDIA recommend you check with your OEM laptop on the software updates recommended for your laptop. The OEM cannot stipulate support technical issues raised by the use of this driver. »

  Since you apperently have a laptop / Notebook, you get all pilots that manufacturers of PC and NOT of MSUpdate site system. Driver version numbers shown on the MSUpdate site cannot be relied on as correct

• Merge two records which has the same ID

  Hi all
  
  Oracle version-> database Oracle 10 g Enterprise Edition Release 10.2.0.4.0 - 64 bit
  

   Table DB_TEMP
  
  create table DB_TEMP 
  ( Db_ID NUMBER, LAST_NAME VARCHAR2(30), 
  FIRST_NAME VARCHAR2(30), MIDDLE_NAME VARCHAR2(30), M_CODE VARCHAR2(10),
  PREFIX VARCHAR2(30), TITLE VARCHAR2(100),CREATION_DATE DATE); 
  
  
  INSERT INTO DB_TEMP values (3, 'JOHN', 'KER', '', 'A146', '', 'PRESIDENT', '5/1/2011');
  INSERT INTO DB_TEMP values (3, 'JOHN', 'KER', '', '', 'MR', 'PRESIDENT ACTIVE HERE', '5/10/2011');
  INSERT INTO DB_TEMP values (11, 'MATT', 'CARLONE', '', '', 'MR', 'CHAIRMAN', '5/1/2011');
  INSERT INTO DB_TEMP values (11, 'MATT', 'CARLONE', '', 'A149', '', 'CHAIRMAN INACTIVE', '5/10/2011');
  INSERT INTO DB_TEMP values (40, 'JOHN', 'SMITH', 'K', 'A147', '', 'PRESIDENT', '5/1/2011');
  INSERT INTO DB_TEMP values (40, 'JOHN', 'SMITH', 'K', 'A147', 'MR', '', '5/10/2011');
  
  Required Output
  
  DB_ID   LAST_NAME   FIRST_NAME   MIDDLE_NAME     M_CODE      PREFIX                  TITLE                CREATION_DATE
  ---------------------------------------------------------------------------------------------------------------------------------------------
  3       JOHN             KER                      A146         MR             PRESIDENT ACTIVE HERE           5/10/2011   
  11       MATT          CARLONE                     A149        MR             CHAIRMAN INACTIVE               5/10/2011   
  40       JOHN             SMITH           K         A147      MR             PRESIDENT                         5/10/2011   
   

  Has obtained two records with DB_ID even on different creation_dates, but some columns are filled in on the next day with the updated data. Now I need merge them into one by taking the MAXIMUM of the column
  
  Help, please
  
  Thank you
  
  Published by: 960736 on November 9, 2012 10:12
  
  Published by: 960736 on November 9, 2012 10:27
  
  Published by: 960736 on November 9, 2012 10:48

  Hello

  960736 wrote:
  I need complete records for title CONCATENATE them with ';' in the meantime, but title that has the M_CODE should must be first if not in does not matter in any order. Any remaining can be Max.

  DB_ID   LAST_NAME   FIRST_NAME   MIDDLE_NAME     M_CODE      PREFIX                  TITLE                CREATION_DATE
  ---------------------------------------------------------------------------------------------------------------------------------------------
  3       JOHN             KER                      A146         MR             PRESIDENT ACTIVE HERE;Member          5/10/2011
  11       MATT          CARLONE                     A149        MR             CHAIRMAN INACTIVE               5/10/2011
  

  So, for db_id = 3, wouldn't you ' PRESIDENT; PRESIDENT ACTIVE HERE; MEMBER "?"
  For db_id = 11, wouldn't you ' PRESIDENT; INACTIVE PRESIDENT '?

  Whatever it is, you need the string aggregation . See this page from the Oracle Base for several ways to do so. Since you have Oracle 10 and because the order is not important, I recommend so the aggregate function defined by the user, called STRING_AGG on that page, but the STRAGG called by most of the people who actually use it. Once you have created the STRAGG, you can use it like this:

  SELECT       db_id
  ,       MAX (last_name)     AS last_name
  ,       MAX (first_name)     AS first_name
  ,       MAX (middle_name)     AS middle_name
  ,       MAX (m_code)          AS m_code
  ,       MAX (prefix)          AS prefix
  ,       STRAGG (title)          -- or STRAGG (DISTINCT title)
                         AS title
  ,       MAX (creation_date)     AS creation_date
  FROM       db_temp
  GROUP BY  db_id
  ;
  

• How to run two 'County of buffered edge' using two different counters at the same time?

  Hello

  I try to use two counters at the same time count the TTL pulses for a fixed period (lets say 10 ms). I have the card PCI-6251 and PCI-6601. I am currently using PCI 6601 as counters and running a self updated the ' stamped edge County - reset.VI. Here, I have attached my VI.

  Now, during the execution of this VI, I get an error saying "error-200251 occurred at Task.vi:4 DAQmx Start" and the possible reasons are, "measures: no USB or DMA channels in loose ends are available.»

  Either stop other tasks which might be using these resources or are considering changing your mechanism for transfer of data to the interruptions if supported.

  Device: Dev2

  Task name: _unnamedTask<80>. »

  What I realized is I'm trying to use two buffers for two meters with ten samples each and this is probably not allowed. I don't know how to solve this out and bad looking for your suggestions.

  Thanks in advance.

  Hi all

  I found a solution too. This is the VI updated the "County of edge stamped" which can simultaneously run two entries-meter using a single source of door and it also uses the DMA and interrupts to save two pads.

  Have a nice weekend.

• Can I use two DSL modems in the same House at the same time?

  original title: DSL Modems

  Can I use two different DSL Modems in the same House for two different computers?

  If you want to use on the same connection that want to use on a different connection than Yes and no. But its best to check with your ISP.

• How to use two different versions of the stub of Web Services SDK files in a single project (5.5 and 6.0)

  Hello

  I have a project that uses the vSphere 5.5 management SDK (I built the stub files according to the documentation) and have these in my c# Solution. Everything works beautifully. My class files that interact with vSphere all have a use statement as follows:

  using Vim25Api;

  All fine so far.

  Now, I want to be able to provide support for a user to connect to vSphere 5.5 and 6.0 vSphere environments. I built the stub files for vSphere Management 6.0 SDK and those in my solution presented in a separate project. Each project is based on a different class library and I have each set of files for each version of vSphere stub in different NuGet packages. However, when I select to use a vSphere 5.5 connection, it seems that internally the 6.0 files stub are used, or vice versa.

  I tried to separate things out by giving the Vim25Service.dll and Vim25Service.XmlSerializers.dll files for each version of alias names (alias by default for all assemblies is "global", but I changed it to vSphere5 and vSphere6 for each version. Then at the top of each class file before all with what I'm doing:

  extern alias vSphere5;

  or

  extern alias vSphere6

  (According to what project I'm in). Then, use the using statement for each class file that interacts with vSphere using vSphere5::Vim25Api; or using vSphere6::Vim25Api; to use the files to correct/stub namespace for each version I support.

  However this still doesn't seem to work, and things seem to be getting confused upwards somehow. I take a guess that internal files make calls and somehow have crossed.

  Is it possible to use two stub version of vSphere together different files in the same project? How should I handle my script? I thought of just upgrading to use the version of vSphere 6 (I can always connect to vCenter 5.5 using these, but some of the properties on the object have changed, (for example some dynamic properties on AlarmObjects and other items have been removed and code breaks if I delete the references to the stub vSphere 5.5 files.) So, I want to keep two different versions and use each of them separately in the same solution, so I support vSphere 5.5 and vSphere 6.

  Solved - this using wsdl.exe and just by specifying a different namespace to use in the proxy class that is generated by using the /n switch.

  for example using PowerShell to build automatically, the value $VimApi and do:

  WSDL.exe/n:$ VimApi...

• use two different characters in the same domain

  Hi, how to use for different fonts in the same field?

  unless "crush you" painting: you do not have.
  If you do, you can use graphics.setFont

• Can I use two hard drives in the Qosmio G40-10th

  Anyone know if it is possible to install two hard drives in this laptop. I read simewhere that it had to be two slots hard drive in it?
  If so where is it located?
  Ther would be all issues around extra heat that could be generated etc.?

  I have had mine for about 5/6 months and have had a screen replaced (defective backlight).
  Many other people have had problems?

  I wonder if its worth buy the extended warranty.

  See you soon.
  Sunil

  Hello

  As far as I know this laptop takes support only a single HARD disk.
  Check the underside of the laptop. Do you see a second slot (cover) the second HDD?
  I imagine that it has a single HARD drive Bay, and so only a single HARD disk can be used.

  I m not a G40 owner and, therefore, I cannot comment on any other issue.
  But each computer technology may start to malfunction it is why I always recommend buying an extended warranty.

  Best regards

• How to set up and use two video cards at the same time.

  I have HP Pavilion a6150d desktop under Windows XP SP3 PC. My goal is to be able to use the integrated video card and GeForce 220 video card I just buy at the same time.

  The integrated video card and GeForce video card (connected to the PCI-E) are installed and usable, but the problem is that I think that my computer cannot detect a video at a time card, so I can't use 2 monitors at the same time.  The video only card detects my computer is what I chose as a primer in the BIOS. When you go to the Device Manager display adaptors I can only find an available video card and that's regardless of Setup as primary in the BIOS.

  My GeForce 220 have VGA, DVI and HDMI display connectors, but I don't have that VGA cables. So my only option at the moment is to use my video card GeForce with band single VGA connector and integrated everyone to use my two monitors.

  I hope someone can help me without spending more money...

  "You're not going to be able to use the graphics card integrated Intel and PCIe x 16 graphics card at the same time."

  Thanks Frank, this already answered my question, you help me already by saving my time searching for the fix (since there is NO solution), although it won't save my money I like always your quick response and your support. My monitor is HPw1907 with a DVI connector, so I'll just buy a DVI cable. My other monitor LCD SHARP that have a HDMI and VGA connector so I'll just use the VGA cable in this one.

  So I guess that my simple goal is not achievable using HP Pavilion a6150d. I love HP more than Dell, but it's doable in Dell, so I hope that HP will have way on how to make this thing work in the future.

• two nodes ASM has the same instance name

  Hello

  I created a grid of ASM of two nodes, when the grid facility (11.2.0.1) finish he created the + ASM1 as instance name for my two knots.

  I have install the ORACLE_SID in + ASM1 and + ASM2 node1 and node2, respectively prior to installation.

  What is wrong, I do it for the installation of the grid? Please suggest.

  Thank you

  To create a virtual environment of RAC in VirtualBox or to share devices in an environment of ASM, you should turn off the virtual machine and change devices in VirtualBox using the following command:

  $ VBoxManage modifyhd asmdisk1.vdi - shareable type

  Then you can add the same features and use the disgroups on different nodes of the DSO. BTW, this is rather a question of the use of VirtualBox for which there is a special forum.

• Problems when using two search bars for filter 1 table

  Hello

  I can't see why this code does not work. It seems that the variables are broken or something but not too sure.

  I had initially 1 single search bar on the page of the inventory where the results would appear and everything worked fine, but when I added a search bar 'master' on the home page, which redirects to the inventory list carrying the variable (which was sought), he comes into conflict with the search code original. Both work independently one another and fine when only the codes research is on work page, but once I combine the two search bars, it will not show the results.

  the Variables are reported (from the home page) without any problems, I did echo out on the inventory page.

  I decided to combine the variables to see if research can run on a single article of the code, instead of duplicates (I thought it can interfere) but no luck. (The code below is that with combined variables)

  Any help would be much appreciated!

  $search = ($_POST ['txt_search']) OR (_GET ['searchprops']) $;

  If (isset ($search))

  {//Only show what is sought

  $searchword = $search;

  $query_propsinv = "SELECT * FROM accessories WHERE name LIKE ' %". "." $searchword. "%' OR description AS '% '. $searchword. ' %' Color GOLD AS '% '. $searchword. "%' OR like ' %". " $searchword. "%' OR size AS '% '. $searchword. "%' OR weight AS '% '. $searchword. "%' OR LIKE ' %". " $searchword. "%' OR as '% '. $searchword. "%' OR location AS '% '. $searchword. "%' OR secondary AS '% '. $searchword. "%' OR the amount AS '% '. $searchword. "%' OR id LIKE '% '. $searchword. "%' OR BC AS '% '. $searchword. » %'";

  }

  {if (! isset ($Search))}

  $query_propsinv = "SELECT * FROM props."

  }

  $query_limit_propsinv = sprintf ("%s LIMIT %d, %d", $query_propsinv, $startRow_propsinv, $maxRows_propsinv);

  $propsinv = mysql_query ($query_limit_propsinv, $drama_database) or die (mysql_error ());

  $row_propsinv = mysql_fetch_assoc ($propsinv);

  This combination will never work:

  $search = ($_POST ['txt_search']) OR (_GET ['searchprops']) $;

  Try this combination:

  {if($_POST['txt_search'])}

  $search = $_POST ['txt_search'];

  }

  {ElseIf($_GET['searchprops'])}

  $search = $_GET ['searchprops'];

  }

• Using two dates to find the age...

  Hello

  I need to find the age of a person the DOB entered into service.  the age may be days or years depending on when the person was born.

  If the person was born is less than a year, so I should be able to calculate the number of days on the other, it should be over the years.

  I can't find the right way to do it.  I tried like this but its does not work as it should:

  todaysDate long = (new Date()) .getTime ();
  long date of birth = dobDateField.getDate ();

  long dateDiff = todaysDate - date of birth;

  multiply a day with 365 days (ignore the leap year for now)
  length of year = DateTimeUtilities.ONEDAY * 365;

  If (dateDiff< year)="">
  int NoOfDays = (int) (dateDiff / DateTimeUtilities.ONEDAY);
  ageEditField.setText (String.valueOf (NoOfDays) + "D");
   
  } else {}
  int NoOfYears = (int) (dateDiff/year);
  ageEditField.setText (String.valueOf (NoOfYears));
  }

  Help, please...

  int age = (diff / (1000 * 60 * 60 * 24));
  int years = 0;
  
  if( age >= 365 ) {
     years = age / 365;
  }
  
  if( years > 0 ) {
   // use years
  } else {
   // use days
  }
  

  Something like that.